Correct syntax for powercli reports (csv format)

PowerCLI novice here... trying to get my head around the correct syntax for the declaration of properties in a csv file.

I know that the underside is all wrong, but it should be easy to understand what I am trying to accomplish. Im just not sure what the correct syntax should be to achieve the desired results (which is just the capture device, model type and State to a csv file).

$report = @)

$info = get-VMHost | Get-VMHostHba | where {$_.} Type - eq "FibreChannel"}

$row = "" | Select the device, model, type, status

$row. Device = $info. Select the device

$row. Type = $info | Select the Type

$row. Model = $info | Select the model

$row. Status = $info | Select the State

$report += $row

$report | Export-Csv "c:\Temp\results.csv" - NoTypeInformation

############

Thanks in advance for the answers...

Kevin

Try this:

$report = @)

foreach ($esx get-cluster | get-vmhost | get-view | sort-object name) {}

foreach ($hba in $esx. Config.StorageDevice.HostBusAdapter) {}

if($HBA.) GetType(). {Name - eq "HostFibreChannelHba")}

$row = "" | Select the WWN, device, model name, State

$row. Name = $esx.name

$wwn = $hba. PortWorldWideName

$wwnhex = '{0}': x f $wwn

$row. WWN = $wwnhex

$row.device = $hba.device

$row.model = $hba.model

$row.status = $hba.status

$report += $row

}

$report | c:\Temp\hbainf-to-host.csv - NoTypeInformation csv export

Tags: VMware

Similar Questions

Not finding the correct syntax for the select statement

Hello

The following statement works very well and gives the expected results:

prompt
prompt Using WITH t
prompt

with t as
  (
   select a.proj_id,
          a.proj_start,
          a.proj_end,
          case when (
                     select min(a.proj_start)
                       from v b
                      where (a.proj_start  = b.proj_end)
                        and (a.proj_id    != b.proj_id)
                    )
                    is not null then 0 else 1
          end as flag
     from v a
    order by a.proj_start
  )
select proj_id,
       proj_start,
       proj_end,
       flag,
       --
       -- the following select statement is what I am having a hard time
       -- "duplicating" without using the WITH clause
       --
       (
        select sum(t2.flag)
          from t t2
         where t2.proj_end <= t.proj_end
       ) s
  from t;

As an academic exercise, I wanted to rewrite the above statement without using the WITH clause, I tried this (amongst dozens of other tests - I hit a mental block and cannot understand):

prompt
prompt without with
prompt

select c.proj_id,
       c.proj_start,
       c.proj_end,
       c.flag,
       --
       -- This is what I've tried as the equivalent statement but, it is
       -- syntactically incorrect.  What's the correct syntax for what this
       -- statement is intended ?
       --
       (
        select sum(t2.flag)
          from c t2
         where t2.proj_end <= c.proj_end
       ) as proj_grp
  from (
        select a.proj_id,
               a.proj_start,
               a.proj_end,
               case when (
                          select min(a.proj_start)
                            from v b
                           where (a.proj_start  = b.proj_end)
                             and (a.proj_id    != b.proj_id)
                         )
                         is not null then 0 else 1
               end as flag
          from v a
         order by a.proj_start
       ) c;

Thanks for the help, much appreciated.

John.

PS: The DDL for table v used by the above statements is:

drop table v;

create table v (
proj_id         number,
proj_start      date,
proj_end        date
);

insert into v values
       ( 1, to_date('01-JAN-2005', 'dd-mon-yyyy'),
            to_date('02-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       ( 2, to_date('02-JAN-2005', 'dd-mon-yyyy'),
            to_date('03-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       ( 3, to_date('03-JAN-2005', 'dd-mon-yyyy'),
            to_date('04-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       ( 4, to_date('04-JAN-2005', 'dd-mon-yyyy'),
            to_date('05-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       ( 5, to_date('06-JAN-2005', 'dd-mon-yyyy'),
            to_date('07-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       ( 6, to_date('16-JAN-2005', 'dd-mon-yyyy'),
            to_date('17-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       ( 7, to_date('17-JAN-2005', 'dd-mon-yyyy'),
            to_date('18-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       ( 8, to_date('18-JAN-2005', 'dd-mon-yyyy'),
            to_date('19-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       ( 9, to_date('19-JAN-2005', 'dd-mon-yyyy'),
            to_date('20-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       (10, to_date('21-JAN-2005', 'dd-mon-yyyy'),
            to_date('22-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       (11, to_date('26-JAN-2005', 'dd-mon-yyyy'),
            to_date('27-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       (12, to_date('27-JAN-2005', 'dd-mon-yyyy'),
            to_date('28-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       (13, to_date('28-JAN-2005', 'dd-mon-yyyy'),
            to_date('29-JAN-2005', 'dd-mon-yyyy'));
insert into v values
       (14, to_date('29-JAN-2005', 'dd-mon-yyyy'),
            to_date('30-JAN-2005', 'dd-mon-yyyy'));

select c.proj_id,
       c.proj_start,
       c.proj_end,
       c.flag,
       --
       -- This is what I've tried as the equivalent statement but, it is
       -- syntactically incorrect.  What's the correct syntax for what this
       -- statement is intended ?
       --
       (
        select sum(t2.flag)
          from (select a.proj_id,
                       a.proj_start,
                       a.proj_end,
                       case when (
                          select min(a.proj_start)
                            from v b
                           where (a.proj_start  = b.proj_end)
                             and (a.proj_id    != b.proj_id)
                                 )  is not null then 0 else 1
                       end as flag
                  from v a
                 order by a.proj_start
               ) t2
         where t2.proj_end <= c.proj_end
       ) as proj_grp
  from (
        select a.proj_id,
               a.proj_start,
               a.proj_end,
               case when (
                          select min(a.proj_start)
                            from v b
                           where (a.proj_start  = b.proj_end)
                             and (a.proj_id    != b.proj_id)
                         )
                         is not null then 0 else 1
               end as flag
          from v a
         order by a.proj_start
       ) c;

Hide / show column for download in CSV format
Interactive report how to include a hidden column of the report for download file (CSV).

For example, if I have the 'Note' field, which is hidden in the IR, but what happens if I need this field to downloaded. CSV file.

Thank you
Copied OK delete now

Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. It looks like all the files are well intact on the disk.

What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk? I entered the following in the "x:\Sources >" prompt:

start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'. How am I supposed to have access to remove the patch? Am I missing something? Perhaps a switch in the syntax to access? Help, please. Thank you.

I tried both options that you recommended. As initially stated, no boot option would produce something other than the black screen. I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

An update, the computer is now fixed. Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start. I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors. That's when I posted the question above after trying to remove the patch in the manner described above. After some time and frustration, I decided to run chkdsk /r c:. It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished. Once I restarted from that, everything came and went very well.

So, the original question remains, what was missing in the command to run pkgmgr/high: successfully. And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually? It would be good to know for the future. Thank you!

What is the correct syntax for function in SQL expressions filters?
Hello

I want to build a report that looks at the last dates 4 snapshot.
I got every snapshot using this filter date

Snapshot Date. "' Snapshot date" = TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (7 - dayofweek (current_date) + 2), current_date)) has
now the second would:
Snapshot Date. "' Snapshot date" = TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (6 - dayofweek (current_date) + 2), current_date)) B
a third
Snapshot Date. "' Snapshot date" = TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (5-dayofweek (current_date) + 2), current_date)) C
a 4th
Snapshot Date. "' Snapshot date" = TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (4 - dayofweek (current_date) + 2), current_date)) D

for simplicity let's call filters A, B, C, D
so, my sql expression should be something like the snapshot Date. "" Instant Date "in 'A', ' B', ' d ', 'C '.
I tried to combine the underside, with hooks and comma separated, without brackets, with single quotes and without, but I always get a syntax error.

Snapshot Date. "" Instant Date "in TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (7 - dayofweek (current_date) + 2), current_date)).
TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (6 - dayofweek (current_date) + 2), current_date)).
TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (5 - dayofweek (current_date) + 2), current_date)).
TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (4 - dayofweek (current_date) + 2), current_date))

He doesn't seem to like the function IN either.
Any idea?
Concerning
G.

Published by: user6185307 on October 27, 2009 08:07
Take each of these filters and union in your report of responses.

In this way, filter you up to exactly the last 4 days.

What is the correct syntax for it?

Hey guys
If...
trace (rowsHolder.getChildByName("MC"+newStr).y);
.. .correctly outputs it coordinate with (in this case) mc001, how out the coordinate y of a clip called item_base_mc that is located in the timeline of mc001?
trace (rowsHolder.getChildByName("MC"+newStr).item_base_mc.y);
.. .save me an error display object.
I tried the permutations of the above with the brackets in various places, but have not cracked the code.
What would be the right way to write?
Thanks for taking a peek.
Shaun

trace (MovieClip (rowsHolder.getChildByName("mc"+"001")).item_base_mc.y);

hope this will help you!

What is the correct syntax for the use of a variable in an ad-hoc query?
Hi all

I'm a casual user of the DB and right now need to update the records about 1000 + so that a certain column gets a unique value.

So I thought I'd use a variable for this.

Then, I built this type of SQL statement for only a small subset of records:
----------
variable number recNumber;
exec: recNumber: = 1;
UPDATE TABLE_TO_BE_UPD
SET COL_TO_BE_UPD = COL_TO_BE_UPD + recNumber
WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
----------

I get invalid SQL statement error when you try to run above (except for the guest who asks for a value I want to omit).

In any case, I also tried this one:
----------
CREATE SEQUENCE seqCounter;
UPDATE TABLE_TO_BE_UPD
SET COL_TO_BE_UPD = COL_TO_BE_UPD + seqCounter.NEXTVAL
WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
----------

Of it, I got the error ORA-01722: invalid number... I guess it's because seqCounter is of type number and the COL_TO_BE_UPD is of type character... (?)

Then I want to ask is what is the correct way to define and use a counter variable type to add a number at the end of a string?

Also another question I would ask is that are variables that are used in queries ad hoc, also called "bind variables"?

Thank you muchly
If you want to add a unique number to a column, then it would be:
```
UPDATE TABLE_TO_BE_UPD
SET COL_TO_BE_UPD = COL_TO_BE_UPD ||to_char(rownum)
WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
```

How to error if the Date is not expected for the CSV Format
Hi Experts,
I have a situation where I expect to format DATE as "LUN-DD-YYYY", but there are issues when the CSV file is created with a DATE as "MON-DD-YY" (example November 15, 12 '). The date is inserted in the DB as November 15, 12 ', so I'm looking for a way to not load these files and these folders with incorrect dates added .bad and .log files. Here is my SQL:
DROP TABLE PER_ALL_ASSIGNMENTS_M_XTERN;

create table PER_ALL_ASSIGNMENTS_M_XTERN)
PERSON_NUMBER VARCHAR2 (30 CHAR),
ASSIGNMENT_NUMBER VARCHAR2 (30 CHAR),
DATE OF EFFECTIVE_START_DATE,
DATE OF EFFECTIVE_END_DATE,
EFFECTIVE_SEQUENCE NUMBER 4,
ATTRIBUTE VARCHAR2 (30 CHAR) CATEGORY,
_ATTRIBUTE1 VARCHAR2 (150 CHAR),
...
ATTRIBUTE Numero20 NUMBER,
ATTRIBUTE DATE1 DATE,
ATTRIBUTE DATE2 DATE,
ATTRIBUTE DATE3 DATE,
ATTRIBUTE DATE4 DATE,
ATTRIBUTE DATE.5 DATE,
ATTRIBUTE DATE6 DATE,
ATTRIBUTE DATE7 DAY,
ATTRIBUTE DATE8 DAY,
ATTRIBUTE DATE9 DATE,
ATTRIBUTE DATE10 DAY,
ATTRIBUTE DATE11 DAY,
ATTRIBUTE DATE12 DATE,
ATTRIBUTE SMOKERS13 DAY,
ATTRIBUTE DATE14 DAY,
ATTRIBUTE DATE15 DAY,
ASG_INFORMATION_CATEGORY VARCHAR2 (30 CHAR),
ASG_INFORMATION1 VARCHAR2 (150 CHAR),
...
ASG_INFORMATION_NUMBER20 NUMBER,
ASG_INFORMATION_DATE1 DAY,
ASG_INFORMATION_DATE2 DAY,
ASG_INFORMATION_DATE3 DAY,
ASG_INFORMATION_DATE4 DAY,
ASG_INFORMATION_DATE5 DAY,
ASG_INFORMATION_DATE6 DAY,
ASG_INFORMATION_DATE7 DAY,
ASG_INFORMATION_DATE8 DAY,
ASG_INFORMATION_DATE9 DAY,
ASG_INFORMATION_DATE10 DAY,
ASG_INFORMATION_DATE11 DAY,
ASG_INFORMATION_DATE12 DAY,
ASG_INFORMATION_DATE13 DAY,
ASG_INFORMATION_DATE14 DAY,
DATE OF ASG_INFORMATION_DATE15
)
external organization
(the default APPLCP_FILE_DIR directory
access settings
(records delimited by newline jump 1
BadFile APPLCP_FILE_DIR: 'PER_ALL_ASSIGNMENTS_M_XTERN.bad'
APPLCP_FILE_DIR log file: 'PER_ALL_ASSIGNMENTS_M_XTERN.log'
' fields completed by ',' EVENTUALLY ENCLOSED BY ' "'
(PERSON_NUMBER,
ASSIGNMENT_NUMBER,
DATE MASK EFFECTIVE_START_DATE CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK EFFECTIVE_END_DATE CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
EFFECTIVE_SEQUENCE,
_ATTRIBUTE_CATEGORY,
_ATTRIBUTE1,
...
_ATTRIBUTE_NUMBER20,
DATE MASK _ATTRIBUTE_DATE1 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE2 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE3 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE4 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE5 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE6 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE7 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE8 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE9 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE10 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE11 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE12 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE13 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE14 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK _ATTRIBUTE_DATE15 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
ASG_INFORMATION_CATEGORY,
ASG_INFORMATION1,
...
ASG_INFORMATION_NUMBER20,
DATE MASK ASG_INFORMATION_DATE1 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE2 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE3 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE4 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE5 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE6 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE7 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE8 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE9 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE10 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE11 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE12 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE13 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK ASG_INFORMATION_DATE14 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
DATE MASK DATE_FORMAT ASG_INFORMATION_DATE15 CHAR (20) 'MON-DD-YYYY ".
)
)
location ("PER_ALL_ASSIGNMENTS_M.csv")
)
REJECT LIMIT UNLIMITED;

.. example report CSV:

E040101, EE040101, 1-Aug-00: 31-Dec-12, 1, NDVC, YES, SFC, N, STIP Plan - pressure, E040101, 2080, 5, 31113, 31113, 31113, 31113, 31113, 31113, 1-Jan-12, 31-Dec-12.

Thank you
Thai
Message details pl of the OS and database versions

Use the RRRR instead of AAAA - http://docs.oracle.com/cd/E11882_01/server.112/e26088/sql_elements004.htm#SQLRF00215

HTH
Srini

Download interactive report to CSV format
Hello
We are on apex 3.1.2.00.02. I have two questions...

1. the interactive reports have a - (dash) in the columns with a null value. So when we download to excel dashboard is always there... the user wants to null. I can't find where it is set to make this dashboard in the report. Can someone help me understand how to do what really null?

2. When download us the report in csv format, it opens automatically in Excel (which we want); [the name of the tab in Excel is something like... csv] daily_bank_definition (1) if we try to rename the tab we get an Excel error on naming format invalid even if the new name is 'valid '. Is it possible to have the tabname set to what you want? Has anyone seen elsewhere this problem and have you been able to get around?

Thanks in advance for your help.

Kristina
Hi Kristina,

To remove the indent of null columns you must go to the attributes of the report and under Pagination, you will see "display Null values as. Just remove the - from there.

To change the tab name to what you want you will be first to save the csv file and remove the name of the [1]. Then, you should be able to change it.

Concerning

Paul

How to export my Contacts in Windows Mail (CSV format, for example)?

How to export my Contacts in Windows Mail (CSV format, for example)?

Thank you!

Hello

See if that helps you.

http://www.howtogeek.com/HOWTO/4905/backup-Windows-mail-messages-and-contacts-in-Vista/

See you soon.

What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

TexasApexDeveloper wrote:

Variable binding is preferred: P23_ID you can also use & P23_ID. (variable substitution notation).

Bind variable and static text substitution references are not interchangeable. For example, static text substitution references cannot be used in allocation targets:
```
:P23_ID  := 'foo';  -- valid
&P23_ID. := 'bar'; -- syntax error (or something weird or sinister due to SQL injection)
```
Substituting static text references should be avoided in SQL and PL/SQL code because of the risk of behavior topic SQL injection and / odd error because of values containing quotes, etc.

PowerCLI reporting CPO

Hi all

I am a novice user of CPO and I'm currently loaded with some of my scripts powershell/powercli reporting converting CPO process.

Current configuration: CPO central server running on the Windows at various locations management servers. CPO allows me to perform tasks PowerCLI against these servers (hooray!), but I really have no idea how to do to get the results of this activity powercli in something else.

To clarify, one of the objectives is to recover some data (for example, get - vm) and which records in a database of trend following. So far, I got the powercli activity to run on the destination windows server and successfully run against its respective vCenter server. But my lack of knowledge within the OHC is limiting me to do great thing else!

Is it possible to pass the objects recovered activity powercli to another activity within the CPO process? Or will I have to dump all the data in CSV format on the windows management server and then use another activity to read this file and send it to SQL? I notice that the powercli activity has an 'exit' tab, but I can't find any documentation on the use of this activity.

Thank you!

I'm not quite sure what VMware powershell CLI version. I was talking to the generic run powershell CLI which also seems to be used in a little of the solution of the IAC. However, I think that Derek Evans or Warren Ackerman would have an idea / some experience to draw from and help.

-shaun

need help with a script of PowerCLI report IOPS / s

I found the following script that gives me the data I want, but not ultimately I need. At the moment he puts it in the PowerCLI window, but I need to get into a csv file so it can be easily sent to others for review.

This is the script that I found:

Add-pssnapin VMware. VimAutomation . Core -ErrorAction SilentlyContinue

$daysback = -30

write-host ' What vCenter you want to connect to? -You may be prompted for a user name and password'

write-host ""

Se connect-VIServer -menu

write-host ""

$vm_data = reading-host "Enter the number of a-Org"

write-host ""

write-host "ARE gathering Ops / s Stats"

write-host ""

$vms = Get-Folder | where {$_. Name -like "*$vm_data*" } | get-vm | where {$_. PowerState -eq "PoweredOn" }

write-host ( "{0,-70}`t{1,8}`t{2,8}`t{3,8}`t{4,8}" -f "VM", "W IOPS avg", "R IOPS avg", "W IOPS max", "R IOPS max" ) `

; $vms | sort | % {

$wval = ()()()Get-Stat $_ -stat « datastore.numberWriteAveraged.average » -Start ()Get-Date). AddDays ($daysback) -Finish (Get-Date) ) | select -expandproperty Value) | measure -average -max);

$rval = (((Get-Stat $_ -stat "datastore.numberReadAveraged.average" -Start (Get-Date). AddDays ($daysback) -Finish (Get-Date) ) | select -expandproperty Value) | measure -average -max);

write-host ( "{0,-70}`t{1,8:N2}`t{2,8:N2}`t{3,8:N2}`t{4,8:N2}" -f $_. Name , $wval. average , $rval. average , $wval. maximum , $rval. maximum )

}

write-host ""

write-host "You can copy the output by selecting the text and copy it to NotePad ++ or similar: .

write-host " " "

" read-host" Hit Enter to Output.

In one, I run, I changed the "Connect-VIServer-menu" to simply plug the vCenter Server I use. I also changed line 16 to 'Get-ResourcePool' since there's not enough pools to make this work. Using the PowerCLI utility, I don't have the option that indicates on line 25. I used the export feature to create csv files in other scripts, but I can't make it work in this case. I know it's probably something simple that I'm just missing.

I like the length of time that this script uses the information. If anything, I don't want to go back to the suite to get a better idea of what the actual maximum number what is / was. It is also necessary to have the columns for information (as he shows). If we are to refine for which metric is present, I would be ok with just having the IOPS numbers / s max in the table.

Any guru PowerCLI have an idea?

Try like this

Add-pssnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

$daysback = - 30

write-host "what vCenter you want to connect to? -You may be prompted for a user name and password"

write-host "

SE connect-VIServer-menu

write-host "

$vm_data = read-host "enter the number of a - Org"

write-host "

write-host "gathering IOPS / s Stats.

write-host "

$vms = get-file | where {$_.} {Name: like "* $vm_data *"} | Get - VM | where {$_.} PowerState - eq "Receptor"}

$report = $vms | kind | % {

$wval = (((get-Stat_$_-stat_"datastore.numberWriteAveraged.average"-Start_(Get-Date).adddays ($daysback) - Finish (Get-Date)) |))

Select - expandproperty value) | measure - average - max);

$rval = (((get-Stat_$_-stat_"datastore.numberReadAveraged.average"-Start_(Get-Date).adddays ($daysback) - Finish (Get-Date)) |))

Select - expandproperty value) | measure - average - max);

$_ | Select Name,

@{N = "IOPS / W avg s";} E = {$wval. Average}},

@{N = "Avg R Ops ARE / s";} E = {$rval. Average}},

@{N = "W IOPS / s max";} {E = {$wval.maximum}}.

@{N = "IOPS R / s max";} {E = {$rval.maximum}}

}

$report | Export Csv report.csv - NoTypeInformation - UseCulture

Find records VM size and export to csv format

Hello

I need this script to export to csv format, but I have problems to make it work.

Notice-EEG - ViewType VirtualMachine-property name, Config.Hardware.Device, LayoutEx | %{

$viewVM = $_; $viewVM.Config.Hardware.Device |? {$_-is [VMware.Vim.VirtualDisk]} | %{

# for each device VirtualDisk, get some info

$oThisVirtualDisk = $_

# get the disk element LayoutEx, which corresponds to the VirtualDisk

$oLayoutExDisk = $viewVM.LayoutEx.Disk |? {$_. {Key - eq $oThisVirtualDisk.Key}

# get the FileKeys that correspond to the LayoutEx-> sort items of this VirtualDisk

$arrLayoutExDiskFileKeys = $oLayoutExDisk.Chain |? {$_-is [VMware.Vim.VirtualMachineFileLayoutExDiskUnit]}

New-Object PSObject-property @ {} TypeName

# Add the VM name

VMName = $viewVM.Name

# disc label, such as "disk 1".

DiskLabel = $_. DeviceInfo.Label

# the path to the data store for the file VirtualDisk

DatastorePath = $_. Backing.FileName

# the size provisioned to the VirtualDisk

ProvisionedSizeGB = [Math]: tour ($_.) CapacityInKB / 1 MB, 1).

# Get the file LayoutEx elements that correspond to the FileKeys for this LayoutEx disk and the size for items that are "diskExtents" (retrieved in the form of bytes, so convert to GB)

SizeOnDatastoreGB = [Math]: round (($arrLayoutExDiskFileKeys | % {$_.)) FileKey} | % {$intFileKey = $_; $viewVM.LayoutEx.File |?} {($_. Eq - $intFileKey - button) and ($_.) Type - eq "diskExtent")}} | Measure - Object - size of the sum). Summary / 1 GB, 1).

} # end new object

} # end foreach-object

} # end external foreach-object

Capture all the output in a variable and send this variable in a CSV file.

Something like that

$result = Get-View -ViewType VirtualMachine -Property Name, Config.Hardware.Device, LayoutEx | %{
    $viewVM = $_; $viewVM.Config.Hardware.Device | ?{$_ -is [VMware.Vim.VirtualDisk]} | %{
        ## for each VirtualDisk device, get some info         $oThisVirtualDisk = $_        ## get the LayoutEx Disk item that corresponds to this VirtualDisk         $oLayoutExDisk = $viewVM.LayoutEx.Disk | ?{$_.Key -eq $oThisVirtualDisk.Key}
        ## get the FileKeys that correspond to the LayoutEx -> File items for this VirtualDisk         $arrLayoutExDiskFileKeys = $oLayoutExDisk.Chain | ?{$_ -is [VMware.Vim.VirtualMachineFileLayoutExDiskUnit]}
        New-Object -TypeName PSObject -Property @{
            ## add the VM name            VMName = $viewVM.Name
            ## the disk label, like "Hard disk 1"            DiskLabel = $_.DeviceInfo.Label
            ## the datastore path for the VirtualDisk file            DatastorePath = $_.Backing.FileName
            ## the provisioned size of the VirtualDisk            ProvisionedSizeGB = [Math]::Round($_.CapacityInKB / 1MB, 1)
            ## get the LayoutEx File items that correspond to the FileKeys for this LayoutEx Disk, and get the size for the items that are "diskExtents" (retrieved as bytes, so converting to GB)            SizeOnDatastoreGB = [Math]::Round(($arrLayoutExDiskFileKeys | %{$_.FileKey} | %{$intFileKey = $_; $viewVM.LayoutEx.File | ?{($_.Key -eq $intFileKey) -and ($_.Type -eq "diskExtent")}} | Measure-Object -Sum Size).Sum / 1GB, 1)
        } ## end new-object    } ## end foreach-object } ## end outer foreach-object

$result | Export-Csv "C:\report.csv" -NoTypeInformation -UseCulture

Exit in PowerCLI in a formatting file

I'm looking for a script to get a bunch of data on the virtual machine, and then write to a file and format in the file with the specific fields between delimiters - while in the file, it would look like this (if the comma is the delimiter):

& lt; & gt; NumberofvCPU, RAMinGB, HDSizeinGB, OperatingSystem, hostname, address IP, MacAddress & lt; & gt;

Hello

My apologies if if you are looking for just the output in CSV format in other control read you on.

$vcserver = "vc-servername"
$outputfile = "C:\VM-info.csv"

Connect-VIServer -Server $vcserver

$report = @()

Get-VM | foreach {
    $vmv = Get-View $_.ID

    $row = " " | Select VMname, NumberofvCPU, RAMinGB, HDSizeGB, OperatingSystem, Hostname, IPAddress, MacAddress

    $row.VMname = $_.Name
    $row.NumberofvCPU = $_.NumCpu

    # Gets the guest memory size and then converts to GB
    $row.RAMinGB = ($_.MemoryMB)/1Kb

    # Gets the total size of all the harddisks connected to the guest and then converts this to GB
    $row.HDSizeGB = (($_.HardDisks | Measure-object -property CapacityKB -sum).Sum)/1Mb

    $row.OperatingSystem = $vmv.Guest.GuestFullName
    $row.Hostname = $_.Host

    # We are assuming here that there is a maximum of 1 network adapter in the guest.
    $row.IPAddress = $vmv.Guest.Net[0].IpAddress
    $row.MacAddress = $vmv.Guest.Net[0].MacAddress

    $report += $row
}

# Outputing the report in a CSV format, removing TypeInformation from the top
$report | sort -property VMname | Export-Csv $outputfile -NoTypeInformation

Disconnect-VIServer -confirm:$false

Change the variables vcserver and outputfile for your environment, and this should do the trick, or at least help you get started.

Kind regards.

Correct syntax for powercli reports (csv format)

Similar Questions

Maybe you are looking for