corrupted file

I have a corrupted file. How to re - name wbemcore.log file? C:\WINDOWS\system32\wbem\logs\wbemcore.log. Thank you

Rename you it like any other file.

You're not going to tell us why you think that the file is corrupted?

If you think that the file is corrupted (it is part of Windows Management Instrumentation), you can rebuild your WMI database and files easily and create a new set of files for you.

To solve your problem, stop the Windows Management Instrumentation service, rename the folder WMI suspicious or distressed, then restart your system.  When the system restarts, the WMI service will start automatically and rebuild the WMI folder and it's content automatically.

Here's the process:

Click Start, run and enter in the box:

services.msc

Click OK to launch the Services applet.

Locate the Windows Management Instrumentation Service.  If the status column indicates that the WMI Service is started (ongoing), right-click on the WMI Service and choose to stop the WMI Service.

Answered in the affirmative, if requested to stop Security Center and Windows Firewall Services (with stopped services, your system is vulnerable to attacks from the Internet, so do not receive is not on the Internet again until you reboot your system).

Now would be a good time to check also the properties of the WMI Service to make sure the startup type is set to automatic for the Service WMI will start automatically the next time the system is restarted.

The Explorer, navigate to the following folder (assuming that your boot drive is C):

C:\Windows\System32\Wbem\
 
Locate and then rename the folder "Repository" to something, as you remember, such as:

Repository.Old

If you care, go ahead and rename or delete the file suspicious wbemcore.log to the logs folder.

Restart the computer, and then check Services again to make sure that the WMI service is restarted automatically and that a new repository folder has been created to replace the one that was renamed.  It may take a while to completely rebuild the file storage (several seconds or minutes) so expect it ends.
 
After the reboot, you will notice the wmiprvse.exe Service running in the Task Manager and it will continue to run until it completes the reconstruction of the repository (this may take a little time).

The rebuilding process could take several minutes depending on your system, but eventually the wmiprvse.exe Service ends and disappear from the Manager tasks.

If you then look at the Event Viewer Application log, there may be some error messages like this:

Event type: error
Event source: WinMgmt
Event category: no
Event ID: 4
Description:
Failed to load C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V4.0.30319\MOF\SERVICEMODEL MOF. MOF by retrieving the file from the repository.

This is normal because when the system restarts, the wmiprvse.exe process has to rebuild parts of the repository as well. It is a mistake to sequence as shown below. You should not see these mistakes again after the system has been rebooted and catches up and finishes rebuilding the WMI repository.

Explanations for errors encountered in the case of the Application of visualization of the newspaper the WMI repository is rebuilt:

Explanation
Windows Management Instrumentation could have tried to compile the file (mofcomp) a .mof marked for ASR, but compilation failed. This is probably due to a sequencing problem.
  
User action
To correct the problem, try to compile the .mof again. If this does not resolve the problem, contact the provider of technical support for the program in question.

You shouldn't need to do something about these error messages and do not see again them after that XP has finished rebuilding the WMI repository.

I can't say how long this will take to rebuild, maybe 10 to 15 minutes until it settles completely.

Tags: Windows

Similar Questions

  • Firefox hangs out because of norton toolbar - get corrupted files

    Hello

    Recently, Firefox crashes * much * to exit. Sometimes I quickly leave Firefox when I switch to another application, and then a few seconds after the release, the crash reporter will appear.

    I've read elsewhere that it could be caused by the Norton Toolbar. I have the latest version of Firefox 38.0.5 and the Norton Toolbar 2014.7.12.14, and I think they are compatible, but I don't think.

    In addition, I make violations of integrity on my PC Windows 8.1. SFC is display of corrupted files. I was able to set this number, only to return the next day. I understand that a program ending abruptly can cause these corruptions, so I wonder if Firefox is the cause?

    In a world of perfect Mozilla and Norton would work out their differences. For now I have disabled the Norton toolbar, which is not a solution because I need to stay safe as I Browse. I'd rather not spend in IE or Chrome or the other. This isn't a solution.

    Everyone knows about this problem? Does anyone have a solution for my particular case crashing on the release of Firefox?

    Thank you

    MRINTRBL7
    Michael

    Hello. It has been another week. Still no hangs out. I think that uncheck use hardware acceleration has worked.

    MrIntrbl7
    Michael

  • Extraction of the installer of Firefox 4.0. EXE failed - corrupt file - what to do now?

    I downloaded this configuration file, and when I tried to run my window of downloads, the extraction failed because it is a corrupted file. Is there another source of this file as well as the other file in the folder Firefox 4.0 English of the United States?

    You try to run Firefox on Windows 98 (not windows 2000 as your user agent claims)? then 3.6 is the highest, you can run on such ancient operating system

  • Full Mac, trying to move the library to SET of photos, but there are corrupted files, cannot locate these files and am stuck!

    Mac Tips Please! I bought an EHR to move my entire photo library like 7yr old MacBook is full to the brim and I need to backup my phone as his shattered and needs sending out of fixing!

    Now, it won't save my picture library on DHM (to remove Mac) as some pic (s?) (among the 35000) are corrupt (but I have no idea of who or how many). I tried to restore the library several times, but then it freezes and says it cannot open the library, it can in fact - but not when restoring it.

    I have now to turn my new SMT in another time machine and saved everything on there. Should I try and remove my library on Mac and then restore from time machine? What this will do to my corrupted files? And it is likely to be able to register then EHD?

    Photo, not iPhoto uses...

    Adevice greatly appreciated!

    What size is the drive?  For Photos, it may be only Mac OS extended (journaled)

    and you can't have photo library on the same amount of time Machine backup

    You can probably clone the library for the EHD with SuperDuper or CarbonCopyCloner or other clone software

    LN

  • Unable to downloand and install firefox, corrupted file error

    with or without virus protection, firewall or any security turned on I have download corrupted file. If I leave settings in my regedit I get unauthorized certificate. I had firefox working and silly then me things locked up and stopped so I uninstalled and cant get it back, tried system restore and still bad, checked for viruses and malware and firefox software is what does not work

    I thank you for your help, come and find the problem was with my ISP and my cable modem.

  • Download Aurora corrupted file

    I am trying to download the Aurora of Firefox version on my computer and it says corrupted file everytime I try. Please can you fix this

    Thank you

    Hello

    Please try this: https://www.mozilla.org/en-US/firefox/channel/

    I think that generally the file is digitally signed. So, you will need to make sure that the integrity of the file is maintained during the download and after downloading.

  • Firefox installs not and showing error 'corrupt file' worm 3.6.3

    When I try to install fiefox 3.6.3 show me Extraction impossible corrupted file

    This has happened

    Each time Firefox opened

    Once downloaded and launched to install

    User Agent

    Mozilla/5.0 (Windows; U; Windows NT 5.1; Chrome/5.0.307.1 en-US) AppleWebKit/532.9 (KHTML, like Gecko) Safari/532.9

    Here is a direct link to 3.6.3: https://ftp.mozilla.org/pub/mozilla.o.../Firefox%20Setup%203.6.3.exe

    Try to download again the link above, to ensure that you have a clean copy.

  • Product recovery does not work on Equim L40 - corrupted files

    I was wondering if someone can help me.

    I've had this laptop for a few months and wanted to do a clean install of the system today and after that on several occasions now she crosses the CD and gets Strawberry where he deals with the new facility and after all away three-quarters through her comes to us in fact say "error: complete failure due to corrupt files.»

    I don't understand how this can be if she tries to re - install the system from the recovery CD.

    Does anyone know how to fix this?

    Hello

    Maybe is the default of restore CD. I think that your neotebook is still under warranty. Go to a Toshiba ASP allow to check the recovery media and if it is fault they replace.

    CU

  • Satellite L350: Vista doesn't work anymore - LogonUI.exe - corrupted file

    Security Suite updates on my daughters Toshiba Satellite L350 windows vista the operating system no longer works.
    An error was detected on the system that contains the following message.

    Open a session about UI.exe - corrupted file
    File or directory C/Program ~ 1 / Toshiba/Smart face V is corrupt & unreadable.

    I tried to run a system restore to the last configuration on both computers, but always the same problem exists. I also tried to restore the two laptops to the factory settings, but the system still does not work. I don't have a restore disk as disk Toshiba HARD drive recovery is on the laptop.

    Can someone help me or suggest any way I can fix it both of these laptops. It seems very strange that both of these computers have stopped working at the same time according to windows automatic updates in October 09.

    Thank you Gary

    Hello

    AFAIK the LogonUI.exe is responsible for connecting to the Windows operating system.
    If the exe file is corrupt then you won't be able to connect to the operating system.

    You don t the recovery disk but you have the HARD drive on the second partition recovery this may be your last resort.

    Switch on and press F8. Choose fix my computer.
    Then new window appears offering the option called: HARD drive recovery.

    Choose this option and see if you can start the HDD recovery procedure.

  • driver hp laserjet p1006 Downloads Download but corrupt file message when trying to launch installation

    The 64-bit window 7-bit driver downloads download successfully.  Double click on download to start the installation results pilot in the corrupted file error message.  What is the problem?  the file security settings, other?

    Or no download from another browser, or the download link have failed.  The latter generated the message file is corrupt. Extraction failed.  Former computer warns the file is not not a common download and could cause problems (a security message to ignore maybe, but I had such drawn on computer problems this week I can't afford to take the chance) I'll leave this question for now and will be instead of tomorrow's computer service.  Thanks for your help.

  • How to find corrupted files and remove them on mac i

    How to find corrupted files and remove them on i mac?  AM currently using OS x EL capitan 10.11.12 Mac said to run slowly and the recent upload did not work until the 3rd attempt.

    Thank you

    You do not have.

    You can run this program and post the results so that we can see what you have installed that could cause your problems.

    http://www.etresoft.com/etrecheck

  • Frequently corruption file characterset OCR and real-time CVS1454 exe file

    HI I am facing strenge same problem in the application of vision. I'm using equipment NI CVS 1454. Is there an OCR on CVS application that inspect the product on the conveyor. I made different characters to choose file of different labels on the product. Now main problem is sometimes not exactly when my chracterset file, Pattern matching templete and corrupts my exe in real-time. I joined a few ok and corrupted file characterset here and also an exe in real-time.

    When I open my file (.abc) characterset in Notepad, that I found damaged files after entering text.

    ####
    #Date: Wed, Aug 1, 2008 11:28
    #OSName: PharLap
    #OSVers: 13.0
    #AppName: PH_EXEC
    #Version: 8.5
    #AppKind: AppLib

    LVRT. DLL loads the address: 0x002F6000

    I don't understand how this error massage journal if written in .abc or rtexe files, which make it currupt... I have also attached my structuring code image file.

    Dear prashantpatel21,

    I do not know how to disable the log of LabVIEW RT errors, at least, is not that you or I could have access.

    It's the idea that deactivation of LabVIEW RT logging of errors will decrease even more the impact of corruption?

    Have you made progress with your service request?

    ~ Nate

  • How can I check and delete the corrupted files?

    I was told that my laptop performance could be carried out by missing or corrupt files. I can't find the system check in the Panel, and it is not found when I try to kick it and run. I don't have the original recovery or installation disk disk.

    According to the page I've linked in the other post: Hard Drive16 GB (Solid State Drive Flash Module).  Solid State Drive SSD =

    You can always do another:

    Check and repair corrupt files is to open cmd in the start menu, then right click "Run as Administrator".  Then type chkdsk c: / r

    • If you get an error "Chkdsk cannot run", type in, ChkDsk runs on your next Windows startup

    Who will eventually fix any corrupt system files, but not others.  You suspect corruption in the other or all of the files, then probably the SSD is having problems.  That can be fixed with conventional methods, as far as I KNOW.  Maybe time to replace it with a new SSD or hard drive classic, if possible.  Don't know how HP implimented the SSD in the mini.

    Since there is no DVD/CD drive integrated into the unit, get an external hard drive or USB key and backs up all data that you consider important before things get worse.  You can buy 16 GB flash drives or bigger, so that would be my suggestion.  Just copy everything on a flashdrive before anything else is done.

    BTW: I found a recovery here media: http://www.computersurgeons.com/SearchProducts.aspx?sbt=hp%20mini%201030nr%20&bkm=Results#Results

  • Problem of corrupted files

    I have a question. I have an error message that comes up constantly as corrupted file VProtector:vprot.exe.  It lists the name of the corrupted file and suggests that the utility Chkdsk trun. I don't know how to do it. I rebooted and the chkdsk countdown begins, but when it gets to zero, no option of chkdsk wouldn't come. It starts just as usual, and the error message keeps coming up.  Can someone help me please? UGH! Thank you

    Hello

    You use software AVG?  Perform a repair of the software

    1. Go to Start -> (settings)-> Control Panel.
    2. Open (programs)-> programs and features, or Add or remove programs.
    3. In the list of programs, select AVG 2013 .
    4. Click the change or Change/Remove button.
    5. Select repair.
    6. Follow the instructions on the screen to complete the installation.
    7. Restart your computer.

    To run chkdsk

    Click Start > type CMD

    Right click on CMD and select run as administrator (Windows Vista, 7 & 8)

    Type chkdsk/r

    Press enter

    You will receive a message about the volume must be locked.  Press y and press enter

    Type Exit to close the CMD window

    Restart your computer to chkdsk starting

    The analysis will take some time and when finished will restart Windows.  You can find the results in Event Viewer > application log

    Search Winninit

  • Windows help called me to say that I had corrupted files

    I received a call from someone who said they were from Windows.  They said that I had corrupted files and harmful spies accumulating daily.  They asked me to type in the address bar, an address that gave me the site he Ammy Admin and asked me to download it for free.  It was a kind of remote access site.  I refused.  He was trying to convince me that it was legitimate, but I was not buying it.  Do you have a service like this?  Was - this legitimate?  Thank you.

    Microsoft does not provide a service like this.  You were right not to follow their instructions.  Unfortunately, this is a very common scam now.

  • Tried to install downloaded like mozilla and google chat .exe files but recover corrupted file error!

    I just new laptop ASUS K42F with Windows 7 Home. Tried to install the basic downloaded such as Mozilla and Google Chat programs, but continue to get the "corrupted file error (more information go to nsis.sf.net/NSIS_error). How to remedy this situation so that I can download updates etc in the future.

    Hello

    There are many different factors can be attributed to your question.  It could be your network card, a problem with your ISP, Modem, or any other number of things.  Something happens during the download process that causes your files get corrupted.  We would like a little more info to help solve your problem.

    Are you connected via a wired or wireless?
    If you are connected wireless; you could try to connect with a wire and then try the downloads.

    Who is your Internet service provider, and what kind of equipment do you use to connect to their service? 

    You may have a faulty modem.  You can call most of the suppliers and ask them to test your equipment/connection to see if it is the problem.

    You have other computers on your network?

    If the answer is "Yes"; do you have the same results as the download of files on them?

    All type of internet security applications or third-party firewall you use?

    If the answer is "Yes";  try temporarily disabling them and download your files.

    You are connected to a router?

    If you are, try to connect directly to the modem and see what kind of results you get.

    If none of this helps, please post your hardware specs so that we can give you more troubleshooting steps

Maybe you are looking for