Could not establish a connection to the source for AV_PRUEBA:OSAUD_Collector

Similar Questions

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• VPN could not establish a connection to the security gateway

  My VPN connection worked, but now after several hours I can not connect.

  My LAN works. (Windows Server 2003)

  The app:

  Cisco Systems VPN Client

  The error message:

  Opening TCP to 209.189.224.138, port 10000...

  Communicating with the gateway to 209.189.224.138...

  Cannot establish a connection to the security gateway.

  What could be the problem?

  Thank you

  Greg

  Hi greg,.

  on the properties of tunnel-> transport mode, click ipsec over UDP and try to connect... I think that, from now on, you connect via TCP 10000.

  Concerning

  REDA

• could not process info.plist in the API for app...

  Hello

  I have download some apps in "Mobileiron" but with one, I get this message:

  «could not treat info.plist in the API for app...» »

  could be a problem for apple servers?

  Certificate?

  movilprovision?

  Any idea?

  Hello

  Did you ever find out what went wrong? Same problem here.

  Thank you

• Essbase Studio Error (1021001): could not establish a connection with SQL data

  Hello.
  
  I try to deploy a cube Essbase Studio but I get the error: "* Error (1021001): could not establish connection to the SQL database server."
  
  My environment is Linux 5, Oracle 11 g and EMP 11.1.1.2. Database Oracle and Essbase has been installed with different users. The .bash_profile to hypadmin user (i.e. install Essbase) I put the following variables
  
  ORACLE_BASE=/U01/app/OracleDB/product/11.1.0
  ORACLE_HOME = $ORACLE_BASE/db_1
  LD_LIBRARY_PATH = / usr/X11R6/lib: $ORACLE_HOME/lib: $LD_LIBRARY_PATH
  ORACLE_HOSTNAME = DevBi.sigfe2
  PATH = $ORACLE_HOME/bin: $ORACLE_HOME/jdk/bin: $ORACLE_HOME/bin: / sbin: $ORACLE_HOME/opmn/bin: $PATH
  ORACLE_SID = orcl
  JAVA_HOME=/U01/app/InstallFiles/JDK1.5.0_19
  
  
  In my pc (windows xp), I can open the Essbase Studio console, the connection to the Oracle server, get the tables and create a minischema of measures and hierarchies (I can see the preview of hierarchies). I also can create cubes with EAS and can connect with MAXSHELL to essbase.
  
  When I try to deploy the cube of Essbaes Studio there get the error ' Error (1021001): failed to establish connection to SQL Database Server.
  
  The Essbase Studio log file says:
  
  + 12: 40:16 24/07/09 (admin-1) NEWS beginning hierarchical creation in the database "5.4.0.41:1423.POC_ESS. POC_ESS1 '... +»
  + 12: 40:16 24/07/09 (admin-1) FINA signed on Essbase by CSS token "5.4.0.41:1423" successfully... +.
  + 12: 40:16 24/07/09 (admin-1) building INFO Start dimension 'DM_CIUDADES'... +.
  + 12: 40:16 24/07/09 (admin-1) MAS FINA start creating rule file... +.
  + 12: 40:16 24/07/09 (admin-1) INFO SQL statement was created and implemented rule /home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ file «»
  + 12: 40:16 24/07/09 INFO (admin-1) the query is "SELECT (CONCAT ("reg_", CAST (cp_105." ((ID_REGIONPADRE' AS VARCHAR2 (1000))) as 'REGION_PADRE', (CONCAT ("reg_", CAST (cp_105. (("' Be ' AS VARCHAR2 (1000))) as 'REGION_HIJO', cp_105. "' DE_REGION ' as 'REGION_HIJO. Defaults to"GO"POC ". "" Cp_105 ORDER BY DM_REGIONES_ESS3 cp_105. "" CSA DE_NIVEL ', cp_105. "" CSA ID_REGIONPADRE ', cp_105. "' BE ' ASC ' + '.
  + 12: INFO file 40:16 24/07/09 (admin-1) rule has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ ".
  + 12: 40:16 24/07/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA (1021001): error al set conexion con el servidor SQL databases. Check out el registro for more information. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException +.
  + 12: unexpected exception SERIOUS cubes from 24/07/09 (admin-1) 40:16 + EssbaseExport to be deployed
  -Exception-
  com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: could not deploy Essbase cube
  ....
  
  
  Thank you for everyone who has an idea to help me solve this problem.
  
  A.S.

  Hello

  If you type database SID lowercase, try entering ITO uppercase. Strange, but my colleagues and I encounter this behavior several times.

• Informatica Workflow not able to connect to the source database.

  Hello
  
  I completed the installation of OBI Apps.All test connections are working properly and I have also configured the relational connection in Informatica Workflow.The passwords, user name and connect string are correct. Tasks that need to connect to the source database fail always when I run an ETL. I checked the logs of these workflow session and he gave me following error:
  
  READER_1_1_1 > DBG_21438 Reader: Source is [UPG11i], [obiee] users
  READER_1_1_1 > CMN_1761 Timestamp event: [Fri Sep 05 18:01:37 2008]
  READER_1_1_1 > RR_4036 error connection to the database]
  Database driver error...
  Function name: logon
  ORA-12154: TNS: could not resolve the connect identifier specified
  
  Database driver error...
  Function name: connect
  [Database error: unable to connect to the database using the user [obiee] and the connection string [UPG11i].]
  
  DAC, I am able to connect to the databases. There seems to be a problem in relational connections. What are the drivers involved and where they should be installed.
  
  Help, please.
  
  Thank you and best regards,
  Soumya.

  It seems that the TNS Informatica file is pointing to is not the appropriate for your database entry. The the more safe thing to do is to verify that all the settings Oracle containing information in the source database.

• Firefox and safari... can not establish a connection with the server of http sites

  Hi I have a mcbook pro loaded with OSX X Yosemite 10.10.3. For some time on safari and firefox I can access https sites only and get an error message "Unable to connect", then then specifically line "Firefox can't establish a connection to the server www.seek.co.nz.

  On the same network, I have an iMac OSX X Yosemite 10.10.5 running and can access http sites that my laptop will not. I compared the network settings and they are identical, I disabled the extension and erased the caches, but always without success. Any siggestions?

  Hello. Take a look at this article, maybe this will help you. OS X Yosemite: If you can't connect to the Internet

• Could not establish a connection to wireless canon mx 340 printer

  Original title: I have a canon mx 340 printer which is wifi. I have a Wi - Fi connection at home and on my computer. I can not connect WiFi to my printer? How can I solve this. Attached to the printer and drivers installed aldready. ?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Your printer is network ready printer.

  This means it should connect directly to the wireless router and then to serve as a network printer.

  The best network printer installation is to install it via the utility that is provided by the seller.

  If it does not automatically establish a connection with the wireless router, read the printer manual need instructions how to manually configure settings wireless on the printer itself.

  As an alternative, the printer can be connected to the router via a cable. Wireless audio can be configured from any computer with the software, when it works, it can be unplugged and go wireless.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Could not establish a connection to display the server

  Hello

  I install a display manager and complete configuration, but when I connect to clinet server, I get an error information "a connection to the server to display . https://xxx:443 could not be

  implemented. ", I checked the log, I found a MSsigne broker service messages.

  "(SESSION: 5DB85731608DCE0AAE5DBF271C348E0D;). "2928472983EAD943A1BF593D8B51A058) JMS: sent Server = All, Type = CapStatus, _MS_SIGNATURE = MSSign"

  who can give me any suggestions?

  Best regards

  Sunny

  Are you sure you can fix the display by name server? If the server does not have a static IP, you must add the name/IP of the windows dir\system32\drivers\etc\hosts file.

  I hope this helps.

  Martin Marinov

  Software engineer, VMware

• Portege R500 could not establish a connection using Novatel Mobilink

  I am unable to make a connection using the software of Novatel Mobilink on my new R500.

  I installed * XP * and installed the relevant downloads on the Toshiba site, i.e.
  Power RF 3 G v 1.0.1.8 control utility
  MobiLink 2.0.2.1.8 v
  Wireless Broadband Mobile v 3.0.0.3

  My SIM is detected OK. I created my profile and checked that my APN, username and password are correct. When I try to connect I get the Mobilink network connection manager * error 619 * saying that perhaps my profile settings are not correct.

  However, if I create a connection by modem with exactly the same settings that the connection works fine.
  The only difference is that I use windows dial up to start the connection rather than Mobilink.

  Put Vista on the laptop the Mobilink connection works fine as well, it seems that if you want to do with XP, so I think that there could be another driver or patch required.

  Anyone had similar problems using Mobilink to initiate the connection?

  Any ideas would be welcome?

  Hello

  I m not an expert in Mobilink network connection, but I goggled a bit and discovered that if this error 619 message you should do this:

  S ' ensure that the data card is inserted into the laptop.
  -Go to compose (i.e. start-> Control Panel-> network connections) network connections and delete the profile called 3 G connection.
  -Try and launch a data call via Mobilink software. It should work now and the 3G connection profile visible once more.

  The following are the possible causes of an error 619 _Other: _
  -Name (APN) access point is not correct (i.e. incorrect characters for example)
  - or not entered at all.
  -Wrong username and/or password used.
  -The used SIM card is not associated with the required AFN

  Good luck

• Could not establish a connection WLAN on my Satellite P100 - 10 p

  A few days ago, I bought Satellite P100 - 10 p:
  -Model No. PSPAGE-01CO1LG3
  -Serial number: 47069869W that came with Vista Home Premium OS.

  I removed Vista because of some problems of incompatibility with some software. Everything works fine except my wireless. Intel 3945ABG wireless card is and I downloaded the latest drivers as the latest version of the software for that, but I'm still not able to connect to any wireless. I get just message "unable to connect".

  Tried to work only on B, G or B/G, strings changed, he recorded on MAC filters in DHCP server, tried to use the automatic configuration of Windows, but still not get any results. Please help me with this problem. I would be very grateful.

  Wireless routers on which I tried to open a session were: SIEMENS SE555 and DLINK DSL G684T.

  Help, please.

  If WLAN is visible for P100 I recommend you reboot the router and try to establish a WLAN connection again. It helped for me several times with Vista preinstalled A200.

  If your WIFI is safe make sure you only use the right password for wireless LAN.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• not able to connect to the device for the application deployment native bb10

  
  

  What operating system do you use?  Have you installed the latest version of BlackBerry link?  You have a firewall or a VPN running that could block the connection?  You are able to connect via WiFi?

• BES system to establish a connection to the command queue

  In the diary: FNDCPGSCPPPP.log
  
  [June 21, 2012 17:01:10 GMT]:1340298070736:Thread[main,5,main]:0:-1:phdb1202.ve.lar.pi.pvt:11.180.243.193:-1:-1:EXCEPTION:[SVC-GSM-WFALSNRSVC-1198568: oracle.apps.fnd.cp.gsc.SvcComponentContainer.startBusinessEventListener ()]: waiting for 178 seconds for BES system to establish a connection to the line of control. The other waits 2 seconds
  [June 21, 2012 17:01:12 GMT]:1340298072747:Thread[main,5,main]:0:-1:phdb1202.ve.lar.pi.pvt:11.180.243.193:-1:-1:ERROR:[SVC-GSM-WFALSNRSVC-1198568: oracle.apps.fnd.cp.gsc.SvcComponentContainer.startBusinessEventListener ()]: BES system could not establish a connection to the line of control after 180 seconds
  
  Kind regards
  
  Guido

  did you complete the manual process of updating configurations of the Workflow in the context of the rapid Clone? No, what part?

  Cloning Oracle Applications Release 11i with Clone fast [230672.1 ID] - Section 3: finishing tasks "update workflow configuration settings.
  Cloning Oracle Applications V12 with Clone fast [406982.1 ID] - Section 3: finishing tasks "update workflow configuration settings.

  Thank you
  Hussein