Could not establish a connection to display the server

Similar Questions

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Could not establish a connection to the source for AV_PRUEBA:OSAUD_Collector

  Hello.
  
  I try to start the OSAUD_Collector but fail. The other two collector's work without problems, but I do not understand why the OSAUD_Collector will not start.
  
  Newspapers:
  SC-labM0-1 > (avault): avault/orasoft / > avctl collname - REDO_Collector - SrcName AV_PRUEBA start_collector
  Starting manifold...
  Collector has successfully started.
  SC-labM0-1 > (avault): avault/orasoft / > avctl collname - DBAUD_Collector - SrcName AV_PRUEBA start_collector
  Starting manifold...
  Collector has successfully started.
  SC-labM0-1 > (avault): avault/orasoft / > avctl collname - OSAUD_Collector - SrcName AV_PRUEBA start_collector
  Starting manifold...
  Error running start_collector command
  Could not establish a connection to the source for AV_PRUEBA:OSAUD_Collector
  
  av_client - 0.log.1
  May 29, 2012 09:00:49 Thread - 10 GRAVE: could not establish a connection to the source for AV_PRUEBA:OSAUD_Collector
  Could not establish a connection to the source for AV_PRUEBA:OSAUD_Collector
  at oracle.av.common.AuditException.toAuditException(AuditException.java:253)
  at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:259)
  at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:291)
  at oracle.av.management.impl.HttpManagementAdaptor.startCollector(HttpManagementAdaptor.java:434)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:651)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:696)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:707)
  at oracle.av.avca.control.StartCollectorTask.executeTask(StartCollectorTask.java:82)
  at oracle.av.avca.backend.BaseTask.execute(BaseTask.java:104)
  at oracle.av.avca.Avctl.startCTL(Avctl.java:180)
  at oracle.av.avca.Avctl.main(Avctl.java:213)
  Nested exception:
  Failed to start the AV_PRUEBA:OSAUD_Collector collector
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
  at oracle.av.common.AuditException.toAuditException(AuditException.java:250)
  at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:259)
  at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:291)
  at oracle.av.management.impl.HttpManagementAdaptor.startCollector(HttpManagementAdaptor.java:434)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:651)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:696)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:707)
  at oracle.av.avca.control.StartCollectorTask.executeTask(StartCollectorTask.java:82)
  at oracle.av.avca.backend.BaseTask.execute(BaseTask.java:104)
  at oracle.av.avca.Avctl.startCTL(Avctl.java:180)
  at oracle.av.avca.Avctl.main(Avctl.java:213)
  
  AVCA.log
  29/05/12 08:57:37 start_collector command execution, - collname, REDO_Collector -, SrcName, AV_PRUEBA
  29/05/12 08:57:37 collector starting...
  29/05/12 08:57:47 collector started successfully.
  29/05/12 08:58:20 start_collector command, - collname, DBAUD_Collector -, SrcName, AV_PRUEBA
  29/05/12 08:58:20 collector starting...
  29/05/12 08:58:37 collector started successfully.
  29/05/12 08:59:05 start_collector of execution, - collname, OSAUD_Collector -, SrcName, AV_PRUEBA command
  29/05/12 08:59:06 collector starting...
  29/05/12 09:00:49 error running start_collector command
  Could not establish a connection to the source for AV_PRUEBA:OSAUD_Collector
  at oracle.av.common.AuditException.toAuditException(AuditException.java:253)
  at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:259)
  at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:291)
  at oracle.av.management.impl.HttpManagementAdaptor.startCollector(HttpManagementAdaptor.java:434)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:651)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:696)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:707)
  at oracle.av.avca.control.StartCollectorTask.executeTask(StartCollectorTask.java:82)
  at oracle.av.avca.backend.BaseTask.execute(BaseTask.java:104)
  at oracle.av.avca.Avctl.startCTL(Avctl.java:180)
  at oracle.av.avca.Avctl.main(Avctl.java:213)
  Nested exception:
  Failed to start the AV_PRUEBA:OSAUD_Collector collector
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
  at oracle.av.common.AuditException.toAuditException(AuditException.java:250)
  at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:259)
  at oracle.av.management.impl.HttpManagementAdaptor.getData(HttpManagementAdaptor.java:291)
  at oracle.av.management.impl.HttpManagementAdaptor.startCollector(HttpManagementAdaptor.java:434)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:651)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:696)
  at oracle.av.management.impl.ManagementServiceImpl.startCollector(ManagementServiceImpl.java:707)
  at oracle.av.avca.control.StartCollectorTask.executeTask(StartCollectorTask.java:82)
  at oracle.av.avca.backend.BaseTask.execute(BaseTask.java:104)
  at oracle.av.avca.Avctl.startCTL(Avctl.java:180)
  at oracle.av.avca.Avctl.main(Avctl.java:213)
  
  I hope you can helpme with that of.
  
  Kind regards
  Milton

  Milton:

  In the newspaper:

  ERROR @ JANUARY 6, 2012 14:39:14 - 4:30 ':
  On line 673; ORA-01875: timezone minute must be between-59 and 59

  Can you please provide the value of the TZ environment variable in the shell that you start the collector? In addition, what is the time zone for your database to the source database?

  Is there a particular reason that you try to start the collector manually, in addition to trying to diagnose this particular problem?

• Essbase Studio Error (1021001): could not establish a connection with SQL data

  Hello.
  
  I try to deploy a cube Essbase Studio but I get the error: "* Error (1021001): could not establish connection to the SQL database server."
  
  My environment is Linux 5, Oracle 11 g and EMP 11.1.1.2. Database Oracle and Essbase has been installed with different users. The .bash_profile to hypadmin user (i.e. install Essbase) I put the following variables
  
  ORACLE_BASE=/U01/app/OracleDB/product/11.1.0
  ORACLE_HOME = $ORACLE_BASE/db_1
  LD_LIBRARY_PATH = / usr/X11R6/lib: $ORACLE_HOME/lib: $LD_LIBRARY_PATH
  ORACLE_HOSTNAME = DevBi.sigfe2
  PATH = $ORACLE_HOME/bin: $ORACLE_HOME/jdk/bin: $ORACLE_HOME/bin: / sbin: $ORACLE_HOME/opmn/bin: $PATH
  ORACLE_SID = orcl
  JAVA_HOME=/U01/app/InstallFiles/JDK1.5.0_19
  
  
  In my pc (windows xp), I can open the Essbase Studio console, the connection to the Oracle server, get the tables and create a minischema of measures and hierarchies (I can see the preview of hierarchies). I also can create cubes with EAS and can connect with MAXSHELL to essbase.
  
  When I try to deploy the cube of Essbaes Studio there get the error ' Error (1021001): failed to establish connection to SQL Database Server.
  
  The Essbase Studio log file says:
  
  + 12: 40:16 24/07/09 (admin-1) NEWS beginning hierarchical creation in the database "5.4.0.41:1423.POC_ESS. POC_ESS1 '... +»
  + 12: 40:16 24/07/09 (admin-1) FINA signed on Essbase by CSS token "5.4.0.41:1423" successfully... +.
  + 12: 40:16 24/07/09 (admin-1) building INFO Start dimension 'DM_CIUDADES'... +.
  + 12: 40:16 24/07/09 (admin-1) MAS FINA start creating rule file... +.
  + 12: 40:16 24/07/09 (admin-1) INFO SQL statement was created and implemented rule /home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ file «»
  + 12: 40:16 24/07/09 INFO (admin-1) the query is "SELECT (CONCAT ("reg_", CAST (cp_105." ((ID_REGIONPADRE' AS VARCHAR2 (1000))) as 'REGION_PADRE', (CONCAT ("reg_", CAST (cp_105. (("' Be ' AS VARCHAR2 (1000))) as 'REGION_HIJO', cp_105. "' DE_REGION ' as 'REGION_HIJO. Defaults to"GO"POC ". "" Cp_105 ORDER BY DM_REGIONES_ESS3 cp_105. "" CSA DE_NIVEL ', cp_105. "" CSA ID_REGIONPADRE ', cp_105. "' BE ' ASC ' + '.
  + 12: INFO file 40:16 24/07/09 (admin-1) rule has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ ".
  + 12: 40:16 24/07/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA (1021001): error al set conexion con el servidor SQL databases. Check out el registro for more information. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException +.
  + 12: unexpected exception SERIOUS cubes from 24/07/09 (admin-1) 40:16 + EssbaseExport to be deployed
  -Exception-
  com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: could not deploy Essbase cube
  ....
  
  
  Thank you for everyone who has an idea to help me solve this problem.
  
  A.S.

  Hello

  If you type database SID lowercase, try entering ITO uppercase. Strange, but my colleagues and I encounter this behavior several times.

• VPN could not establish a connection to the security gateway

  My VPN connection worked, but now after several hours I can not connect.

  My LAN works. (Windows Server 2003)

  The app:

  Cisco Systems VPN Client

  The error message:

  Opening TCP to 209.189.224.138, port 10000...

  Communicating with the gateway to 209.189.224.138...

  Cannot establish a connection to the security gateway.

  What could be the problem?

  Thank you

  Greg

  Hi greg,.

  on the properties of tunnel-> transport mode, click ipsec over UDP and try to connect... I think that, from now on, you connect via TCP 10000.

  Concerning

  REDA

• Portege R500 could not establish a connection using Novatel Mobilink

  I am unable to make a connection using the software of Novatel Mobilink on my new R500.

  I installed * XP * and installed the relevant downloads on the Toshiba site, i.e.
  Power RF 3 G v 1.0.1.8 control utility
  MobiLink 2.0.2.1.8 v
  Wireless Broadband Mobile v 3.0.0.3

  My SIM is detected OK. I created my profile and checked that my APN, username and password are correct. When I try to connect I get the Mobilink network connection manager * error 619 * saying that perhaps my profile settings are not correct.

  However, if I create a connection by modem with exactly the same settings that the connection works fine.
  The only difference is that I use windows dial up to start the connection rather than Mobilink.

  Put Vista on the laptop the Mobilink connection works fine as well, it seems that if you want to do with XP, so I think that there could be another driver or patch required.

  Anyone had similar problems using Mobilink to initiate the connection?

  Any ideas would be welcome?

  Hello

  I m not an expert in Mobilink network connection, but I goggled a bit and discovered that if this error 619 message you should do this:

  S ' ensure that the data card is inserted into the laptop.
  -Go to compose (i.e. start-> Control Panel-> network connections) network connections and delete the profile called 3 G connection.
  -Try and launch a data call via Mobilink software. It should work now and the 3G connection profile visible once more.

  The following are the possible causes of an error 619 _Other: _
  -Name (APN) access point is not correct (i.e. incorrect characters for example)
  - or not entered at all.
  -Wrong username and/or password used.
  -The used SIM card is not associated with the required AFN

  Good luck

• Could not establish a connection WLAN on my Satellite P100 - 10 p

  A few days ago, I bought Satellite P100 - 10 p:
  -Model No. PSPAGE-01CO1LG3
  -Serial number: 47069869W that came with Vista Home Premium OS.

  I removed Vista because of some problems of incompatibility with some software. Everything works fine except my wireless. Intel 3945ABG wireless card is and I downloaded the latest drivers as the latest version of the software for that, but I'm still not able to connect to any wireless. I get just message "unable to connect".

  Tried to work only on B, G or B/G, strings changed, he recorded on MAC filters in DHCP server, tried to use the automatic configuration of Windows, but still not get any results. Please help me with this problem. I would be very grateful.

  Wireless routers on which I tried to open a session were: SIEMENS SE555 and DLINK DSL G684T.

  Help, please.

  If WLAN is visible for P100 I recommend you reboot the router and try to establish a WLAN connection again. It helped for me several times with Vista preinstalled A200.

  If your WIFI is safe make sure you only use the right password for wireless LAN.

• Could not establish a connection to wireless canon mx 340 printer

  Original title: I have a canon mx 340 printer which is wifi. I have a Wi - Fi connection at home and on my computer. I can not connect WiFi to my printer? How can I solve this. Attached to the printer and drivers installed aldready. ?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Your printer is network ready printer.

  This means it should connect directly to the wireless router and then to serve as a network printer.

  The best network printer installation is to install it via the utility that is provided by the seller.

  If it does not automatically establish a connection with the wireless router, read the printer manual need instructions how to manually configure settings wireless on the printer itself.

  As an alternative, the printer can be connected to the router via a cable. Wireless audio can be configured from any computer with the software, when it works, it can be unplugged and go wireless.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• The network adapter could not establish the connection using the external ip address

  Hi team,

  Please look in the attached files.

  I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

  But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

  Here is the following URL will display the error during the startup of tomcat.

  The network adapter could not establish the connection,

  In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

  even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

  any help would be greatly appreciated!

  Thank you.

  Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

  Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

  In addition, your tnsnames.ora points to localhost...

  Stop using localhost, unless you only want things to work on the same machine.

• BPOS error "could not establish a secure connection t server. Please check if you have installed the required certificates.

  Hello

  We use the Microsoft Online Service in our office.

  The user is confronted with the question by connecting to the Microsoft Online Service, it gives the error could not establish a secure connection t server.  Please check if you have installed the required certificates.

  The one you suggest to fix the problem

  Thank you

  Hello
   
  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices

• Connection to blog___An error error occurred when tries it to connect your underlying connectio of blog___The was closed. could not establish trust relationship for the secure channel.__you SSL/TLS must correct this error before proceeding

  I installed Microsoft Security Essentials 2 days back... I get some error messages since then.

  I use Windows live writer to load my post on the blogger. My computer is Windows XP with SP3.

  Since installing MSE, when I try to post on my blog using windows live writer, I would say an error message:

  "Connection to the blog error."

  An error occurred while trying to connect to your blog

  The underlying connectio was closed. could not establish trust relationship for the SSL/TLS secure channel.
  You must correct this error before proceeding. "

  Please help me solve this problem. Your valuable advice is apprecited. Thank you.

  Post in the MSE forums:

  http://answers.Microsoft.com/en-us/protect/default.aspx

• Cloud of Console 12.1.0.4 - IO error: the network adapter could not establish connection to access Instances of the ASM

  Hello

  Using the last version of the Console 12.1.0.4 cloud. I discovered a RAC cluster consisting of two nodes.

  And if I "try access the Cloud Console ASM instances will fail with this error:"

  IO error: the network adapter could not establish the connection

  The connection descriptor has been

  (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1-vip.localdomain)

  (PORT = 1522))) ((CONNECT_DATA = (SERVICE_NAME = + ASM1) (INSTANCE_NAME = + ASM1 (SERVER = DEDICATED))(UR=A)))

  My env is:

  Console of clouds on: release of Red Hat Enterprise Linux Server 6.6 (Santiago)

  Database Rac: Red Hat Enterprise Linux Server release 6.5 (Santiago)

  Someone knows how to solve this problem?

  Thank you very much!

  Arturo

  (1) what is the user id you are using OEM fior?

  The user id should have Sysdba and should not be in the role SYSASM.

  (2) in order to check your port

  In server, in the gate of the House, listener, lsnrctl status--> Verify asm instance listed on your listening port.

  Summary of endpoints listening...

  (Check that the PORT and IP information is correct)

  Instance '+ ASM1' READY State, has 1 operation for this service...

  (3) in addition, connect to asm and check the connection

  Show u local_listener and entered into OEM parameter details are correct.

  (4) OEM, I think you add Cluster_ASM.

  Oracle_home_path--> you're grid House

  username--> with sysdbarole

  --> Sysdba role

  Cluster_name--> $GRID_HOME/bin/cemutlo - n

  Service name--> + ASM

  ADD

  NAME: INSTANCENAME

  -Home: HOST1

  listener_HOST-->< show="" parameter="" local_listener=""> exit

  PORT-->

  SID- + ASM1

  Concerning

  Krishnan

• I/o error: the network adapter could not establish the connection: connection to oracle database

  Hello

  I am not able to connect to the Oracle SQL developer database. I said / 0 error: the network adapter could not establish the connection.

  I started the listener, but what I see is, it points to a different IP address instead of the IP address of the host. How to change the name of host or IP address.

  I see that it points to the host name in listener.ora.

  Attached the screenshot

  

  Can someone help me solve this problem?

  Thanks in advance

  What he says is the listener.ora file is not necessary to start the listener.  If you rename, then start the receiver, then start the db, after a minute or two, the db should automatically register with the listener and then you can make a tnsping or otherwise connect to the database through the listener.

  I'm not entirely sure what's going on with your image, but I can't help but wonder if somehow something is not what you expect with the investigation period, whenever it starts.

  So use lsnrctl status lsnrctl services to see what the listener is the situation and tnsping and ping from the client to see what he thinks.

• IO error: the network adapter could not establish the connection

  I'm configuration 11.1.2.3 on Windows 2008 using the Oracle database and when I try to configure connection services database and shared registry associated with the House I get the error "IO error +: the network adapter could not establish the connection +" all by filling in the details of the database. Windows Firewall is disabled, database is able to connect through SQL Plus am running, listening for the database service is running and the name of SID and the server have been provided properly. I even used localhost, apart from the name of the server providing the servename and ORCL is the SID. Any suggestions please?

  Usually, if I install on a Virtuelle/portable Windows machine that does not have a fixed IP or a dns entry I install a card closure before installing Oracle and have never had problems, it is established in http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#BABFHCJG

  See you soon

  John
  http://John-Goodwin.blogspot.com/