Could not load file or assembly %27NationalInstruments.Vision%2C Version%3D10.0.35.101%2C Culture 3Dneutral %2C PublicKeyToken % 3D18cbae0f9955702a % 27 or one of its dependencies. The system cannot find the specified file.
I'm writing a .net application that references the dll of NOR. I can make a reference to the dll of and access to objects that are, but when I run my app and try to run the code in the dll I get an error "file not found". I tried to run Visual Studio as an administrator but that has no effect. I can run applications example provided with the software NOR very well.
Visual Studio 2008, .net 3.5; Windows 7 operating system
Thank you.
Changed the build to x 86 and let's roll.
Tags: NI Software
Similar Questions
-
"CLI. implementation ' or one of its dependencies." system cannot find the file. to remove
This show up on my desk. How can I remove this and should I delete that?
Hello
1 how long have you been faced with this problem?
2 have you made changes on the computer before this problem?
3. What is the exact error message?
4. when exactly you get this error message?Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer. -
Original title: uninstalled paintnet3.5 now impossible to reinstall download
"downloaded the file and open it to install gives this error :-systemi/o file not found exceptions could not load file or Assembly of base of the version3.0.0.0 culture = neutral public key token = 31bf3856ad364e35' or one of its dependencies, the system cannot find specified file base name of the 3.0.0.0 - batch version of gibberish between - then" AVT Assembly binding logging is disabled to allow to link failure check the registry value (hklm\software\microsoft\fusion\enablelog (c word) 1 IAM onwindows vista service pack2 version6 and ihavent a clue unless something has been lost in my recent wave of attacks of malware bullguard - computer reports now clean-i do not know how to access the files of basic trends are not listed as installed programs
Hi Bernie, 78,.I suggest that you follow these steps and check if it helps.Step 1:Right-click on the setup.exe file and run as administrator and check.Step 2:I suggest that make you the SFC scan on your machine like a system file is damaged or missing. Scan SFC repairs and tries to retrieve system files.Step 3:I am not quite sure if the malware is flushed out of your system. I wish that you run a scan complete of your security again software or run a line scan using the link below.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Could not load file or assembly ' NationalInstruments.VisaNS, Version = 8.9.20.108
I have an app VS c# that references the assembly OR world. It worked fine in 32-bit Windows XP environment. However, when I installed and ran the application in the Windows 7 64-bit environment. The app was the following text:
System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541' or one of its dependencies. The system cannot find the specified file.
"File name: ' NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541"Where can I find this assembly file version and why did not he ask you when I ran into the Windows XP 32-bit platform? It's the same application binary.
Thanks for your help!
Another reason, you can get this error if you have your target, the value 'Any CPU' platform in the project properties. "Any CPU" setting causes the application runs in 32-bit on a 32-bit system and 64-bit on a 64 bit system mode. It would be a problem or a 64-bit system because you don't have the 64-bit installed assemblies and a 64-bit application cannot load a 32-bit assembly. You must change this setting to 'x 86' which will force to run in 32-bit mode on 32-bit and 64-bit systems.
-
I'm fighting this problem for days (euphemism)...
I used to work, but now isn't an installation package. I tried to install and run the program on a couple of computers and the program hangs when loading the Dll NI. I put everything ' x 86.
The list of dependencies in VS2010 is illustrated in the attatched screenshot.
The text of the mistake of trying to run the application on the target computer is lower in italics.
Of course, I could use some help on this! Thanks in advance.
See the end of this message for details on the call
just-in-time (JIT) debugging instead of this dialog box.The exception text *.
System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.DAQmx.dll' or one of its dependencies. The specified module could not be found.
File name: "NationalInstruments.DAQmx.dll."
at IPClientTest.MTF_Supervisor.mainSstart13)
at IPClientTest.MTF_Supervisor.mainStartByParts)
at IPClientTest.MTF_Supervisor.lblSelfTest_Click (Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick (EventArgs e)
at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
at System.Windows.Forms.Control.WndProc (Message & m)
at System.Windows.Forms.Label.WndProc (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)Loading assemblies *.
mscorlib
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.34011 built by: FX45W81RTMGDR
Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
MTF_Supervisor
Assembly version: 1.0.3.3
Win32 version: 1.0.3.03
Code: file:///C:/mtfDebug/MTF_Supervisor.exe
----------------------------------------
System.Windows.Forms
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.34003 built by: FX45W81RTMGDR
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
MTF_ClassLib
Assembly version: 1.0.1.0
Win32 version: 1.0.1.0
Code: file:///C:/mtfDebug/MTF_ClassLib.DLL
----------------------------------------
NationalInstruments.UI.WindowsForms
Assembly version: 13.0.40.242
Win32 version: 13.0.40.242
Code: file:///C:/mtfDebug/NationalInstruments.UI.WindowsForms.DLL
----------------------------------------
NationalInstruments.UI
Assembly version: 13.0.40.242
Win32 version: 13.0.40.242
Code: file:///C:/mtfDebug/NationalInstruments.UI.DLL
----------------------------------------
NationalInstruments.Common
Assembly version: 13.0.40.188
Win32 version: 13.0.40.188
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/NationalInstruments.Common/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.dll
----------------------------------------
System.Web
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.34009 built by: FX45W81RTMGDR
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------
System.Core
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
NationalInstruments.Common.Native
Assembly version: 13.0.40.188
Win32 version: 13.0.40.188
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/NationalInstruments.Common.Native/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.Native.dll
----------------------------------------
System.Xml
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Design
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Design/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Design.dll
----------------------------------------
Accessibility
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------Salvation Lorne.V.,.
Exactly how you install OR DAQmx on the target computers? Even if you include the DAQmx merge module in your version, you always need to install DAQmx on the target machine separately.
You can also confirm that the DAQmx.dll is installed in the same directory on the development and deployment of the machines? And you have the same version of DAQmx on both machines?
Kind regards
-
Could not load file or Assembly runtime being more recent than currently loaded run time
I've recently upgraded to TestStand 2010 and Visual Studio 2010 TestStand 4.2.1 and Visual Studio 2008. I now get the following error in the analysis of the sequence for all calls to my .net dll.
"Step"My_StepType"not loadable module. Could not load file or Assembly or one of its dependencies. This Assembly is built by a runtime newer than the runtime currently loaded and cannot be loaded. »
I don't know how LONG it is. All of this worked previously. I tried to go back to the dll, but that makes no difference.
Any ideas?
Thank you.
I found where this topic is discussed in detail a bit more. It is in the TestStand reference manual that is installed with TS. TS 2010 it's on page 5-12 and the section labeled using .NET Framework under section adapter .NET of Chapter 5 (Module adapters).
-
Could not load file or assembly NationalInstruments.DAQmx
I get an error 'Could not load file or assembly NationalInstruments.DAQmx' when I put my application on another computer. The only difference between the two computers that I can say is that one that doesn't use the 64-bit Windows version and one who does has the 32-bit version.
DAQmx exists on the computer and I can control the acquisition of data through the Explorer measurement & cutting automation.
Any suggestions?
Thank you
Garth
I solved the error by downloading the latest version of DAQmx on computers and recompiling code using the most recent version.
-
Hey all,.
I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?
Hi tripleb316,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-
Original title: could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies
Hello I am looking for a way to solve:
Could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies.
This message appears whenever I try to open a graphics program HD writer AE 3.0
I'm running xpsp3 and all updates are underway according to Microsoft
Hello
1. were you able to use the program without any problem before?
2. don't you make changes on the computer before this problem?
Step 1: Repair of .net framework and check.
Reference: http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
Step 2: Uninstall and reinstall this program.
-
U - SQL error: could not load file or assembly 'ScopeEngineManaged.dll '.
Hello
I downloaded 'Azure Data Lake Tools for Visual Studio' for Visual Studio 2013 and installed.
I created a sql - u script and try to run on the local computer. I am getting error below.
"1 E_CSC_SYSTEM_INTERNAL error: internal error! Could not load file or assembly 'ScopeEngineManaged.dll' or one of its dependencies. The specified module could not be found. 1 1 USQLApplication1 Samples\USQLApplication1\USQLApplication1\M12PostCodes.usql D:\Nagaraju\Hitachi\Datalake.
Please help me solve this problem.
Note: If this isn't the correct category, please route to the appropriate queue.
Concerning
NK
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
New-WebserviceProxy could not load file or Assembly
Hi, I'm calling a WebService from powershell, but I get the error ' could not load file or assembly "file:///C:Windows\TEMP\xbnahjh.dll '"
I am however able to call the weather sample webservice as shown in "http://blogs.technet.com/b/heyscriptingguy/archive/2009/11/17/hey-scripting-guy-november-17-2009.aspx", but not that which is placed on a different server. I have no knowledge about the services of Powershell or webservice. Any suggestions on where I should look would be useful.
I'm running the powershell in administrator mode and also used the unrestricted set-execution policy.
Hello Silvia,.
Thanks for posting your concern on the forum.
According to the description of the problem you want to call a webservice from powershell and get the error could not load file or assembly 'file:///C:Windows\TEMP\xbnahjh.dll '.
As the problem is related to a dll file, this means that some dll files are missing or damaged. In order to repair, I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.
Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
- Go to Start, click all programs and open the Accessories.
- Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
- In the command prompt, type the following command and press ENTER:
sfc/scannow
For more information, refer to this link:
http://support.Microsoft.com/kb/929833/en-us
You can see the article mentioned below to call a WebService from powershell.
Calling a web service from script Powershell
Hope that the information provided is useful. Keep us updated on the issue and we will be happy to help you further.
Kind regards
-
Could not load file or Assembly sorttbls.nlp or one of its dependencies
I always get this error message... is the cause of my computer and not to connect or to load a web page like www.msn.ca on the browser? Could not load file or assembly sorttbls.nlp or one of its dependencies - it is displayed every time that I have restore to an earlier point to my web page. What is the cause? Help, please.
Hi Jaime,
1. what version of web browser is installed on the computer?
2. the specific problem of www.msn.ca? is
3. the problem occurs on other web browsers?
I want to tell you that this problem can be caused by a corrupt Microsoft .NET Framework.
Follow these steps and check if that helps:
Go to add/remove programs and select the "Edit" button for Microsoft .NET Framework 2.0 Service Pack 1 (and Microsoft .NET Framework 3.0 Service Pack 1).
If the framework could not be repaired or uninstalled and then follow the link and follow the steps in the article:
http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
-
ODAC 12.1.0.2.1 x 64 install on Win2012 "could not load file or assembly '.
I downloaded and installed ODA 12.1.0.2.1 (64-bit) on a 2012 R2 Windows Server, including using the OraProvCfg utility to save the 4 Oracle.DataAccess.dll odp.net and 4 Oracle.Web.dll asp.net in Windows GAC. The application depends on this facility is v6.5 ConnectShip warehouse that uses IIS web pages for the management of the administration. Loading the web interface I get the ODAC following error:
Could not load file or assembly 'Oracle.DataAccess, Version = 4.112.1.2, Culture = neutral, PublicKeyToken = 89b483f429c47342' or one of its dependencies. The system cannot find the file specified.)
I can confirm that the DataAccess assemblies both Web are present in c:\Windows\Microsoft.NET\assembly\GAC_64.
Anyone would be able to direct me towards a resolution of this error?
Concerning
Hi Alex,
Once again, thank you for your comments. Finally I could muscle my way through installation. For anyone else who might happen to run in this case, it's the right thing:
OS: Windows 2012 R2 (64-bit)
App: ConnectShip warehouse 6.5
Requirement for Oracle DB: ODAC 11.2.0.2.1 (32 bit)<---This was="" necessary,="" not="">
As well as the installation of the 32-bit files ODAC, I also ran the utility OraProvCfg to register for the Oracle.Web.dll of ASP.Net and odp.net Oracle.DataAccess.dlls
Once that ODAC 32-bit install was in place the rest of the ConnectShip facility fell in place without the following errors.
See you soon
-
Could not load file or assembly ' Oracle.DataAccess, Version = 4.112.4.0?
Hi guys,.
As the title says "could not load file or assembly ' Oracle.DataAccess, Version = 4.112.4.0. The program crashes when I try to run the following code.
OracleConnection Con = new OracleConnection (ConfigurationManager.ConnectionStrings ["ConnectionString1"]. (ToString());
SqlCmd OracleCommand = new OracleCommand();
OracleDataReader dr;
sqlCmd.Connection = Con;
Con.Open ();
sqlCmd.CommandText = "INSERT INTO ADFG values (0, 0, 0, ' ', sysdate);
sqlCmd.ExecuteNonQuery ();
sqlCmd.Clone ();
MessageBox.Show ("inserted record!");
Any help would be appreciated.
Hello
This occurs generally when there is an inconsistency in the application of ILO version and the version of ODP.NET bits.
If you compiled/built the application with Any CPU option, please modify X 86 or X 64 and build and run the code.
Thanks and greetings
Vincent
Support of Oracle
-
Could not load file or assembly Oracle.DataAccess
I have a VB.Net application that worked fine on a Windows 2003 32-bit secure server for many months. Exe has already been compiled on a 32-bit Vista machine and then the exe has been copied to the server. Today, I was delivered a new 64-bit Windows 7 computer. I installed the 32 bit ODAC 11.2.0 and added a reference to Oracle.DataAccess.dll in Visual Studio 2010. The program compiles and runs normally on my 64 bit Windows 7 computer. In Visual Studio 2010, I 'CPU target' defined on x 86.
When I copy the exe on the 32-bit server, the following error message is returned: "could not load file or assembly Oracle.DataAccess.
The server has two facilities of ODAC 32bits, 11.2.0.2 and 10.2.0. Why does this work?
Published by: Francis November 1, 2012 13:02It's been awhile that I'm on version issues, so I'm a little fuzzy, but I think the problem here is that you develop against a newer version (even if only a little) of the Assembly, that which exists on the deployment target computer. There are policy files to redirect the old versions of the assembly to the latest version installed on the computer, but it does not work to redirect a newer version (i.e. 2.112.2.0) downwards (i.e. 2.112.1.0).
Maybe you are looking for
-
I use numbers to make files, but other people could not open, why?
I use numbers to make files, but other people could not open, why?
-
Permutation of the Sims in the iPhone 6
I broke my iPhone I used for a 2nd number. I intend to buy the new iPhone in September, so need an interim solution - given I have two phones at the same time (I can use one during the week and the other at the end of week) it would be viable to just
-
Once my system has rebooted and I opened my emails in outlook, when I clicked on a hypertext link, there me no where. I don't have an error message. I went back in and make Firefox my default program with all the extensions and protocols for Firefox.
-
Help, all my favorites have disappeared. Cannot access
After being on holiday, I can't access my bookmarks bar. Even if I try B cltrl shft prompt.Why can't I just click on the bookmarks bar and see all my boookmarks important?
-
How can I add my own patches to WSUS?
I want to add my own service packs on the wsus server, something which cannot not available on microsoft updates or takes too long to download from the .exe file, I I want to add manually to the wsus. Is there anyone who can help me? Thanks in advanc