Count down to a specific time (not midnight)

Similar Questions

• My computer shuts down unexpectedly, all the time. It is not the disk space. I don't know what it is.

  Original title: MY COMPUTER IS down unexpectedly, ALL THE TIME, IT is NOT DISK SPACE... I DON'T KNOW WHAT IT IS

  CAN YOU PLEASE ME SAY WHAT DO TO SLOVE THIS PROBLEM, MY COMPUTER STOPS UNEXPECTEDLY, ALL THE TIME.

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Keep in mind
  This associated heat does not always mean too much heat as it is often a part or a component
  who is too sensitive to normal levels even heat.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Setting PC to turn off automatically - count down

  Does anyone know if it is possible to adjust the computer turns off automatically during a certain period, such as two hours. For example if I download something on the internet or watch a movie form the bed, it would be useful if there was a possibility that my computer can turn off for a while, I put. If the TV can do that, why the computer can not?

  Thanks for the help

  Here's how to configure your PC to turn off automatically:
  1) click Start
  (2) select "Control Panel".
  (3) select "system and maintenance".
  4) click on "Administrative Tools".
  5) click on "Task Scheduler."
  (6) click on "create task" (right in the list pane under) "Actions") "
  "(7) opened in the general tab it will choose if it only works when the account that is used to implement is connected, or ' if that user is logged in or not" (leave the box ' do not store the... "empty password)
  (8) always in the general tab, check the box 'run with highest privileges '. (This will ensure that no program can block)
  (9) type a name for the task (in the general tab)
  (10) If you want the PC off at a set time (eg. midnight) follow step 10). If you want to close after a period of time (eg. time of 20 minutes of inactivity) skip step 10).
  (a) click on the tab "triggers."
  (b) click on 'new '.
  (c) under 'settings', select 'everyday', then enter the duration you want in the space provided. Make sure the box ' reproduce each:... days said 1.
  (d) click OK.
  (11) do this step to turn off the PC after staying idle for some time.
  (a) click on the 'conditions' tab in the window "create a task".
  (b) check the ' start the task only if the computer is idle for: "and chose the desired time
  (c) less ' wait timeout:' chosen "don't wait."
  (d) click OK
  (12) in this stage, communicate us to the PC to shut down.
  (a) click on the tab "actions".
  (b) click on 'new '.
  (c) in the line of program/script, type "C:\Windows\System32\shutdown.exe.
  (d) click OK.
  13) click OK in the window "create a task".
  (14) you are now finished.

  Here's how to configure your PC to automatically through windows: http://www.astahost.com/Turn-Computer-Automatically-t7075.html

  Your PC will already in mode 'sleep' (unless you have changed which) which is a State of "close arrest", after 20 min. or more, but it still uses power. The advantage of the 'sleep' is that it starts in a few seconds of him compared to 1 min normally. Mode sleep in Vista: http://www.howtogeek.com/howto/windows-vista/re-enable-sleep-mode-in-windows-vista/

  I hope this helps.

• How to clear the text drafted the Bitmap by graphics.drawtext (...) (try to do a count down on top of the Bitmap)

  Hello, I'm doing a count down on top a Bitmap image. I use graphics.draw (),
  However, this ended up writing the text on text, no matter what I do.
  Example: when the second = 3, the image will be 3 shot
  When the second = 2, the image will be 2 on top 3 drawn on it (in this case 3 does not appear)
  When the second = 1, the image will be 1 of 2 on top 3 drawn on it (in which case 2.3 does not appear)

  Can anyone help please, thanks in advance... Here is the code:

  Timer each who calls every second {...
  {Synchronized (UiApplication.getEventLock ())}
  Bitmap temp = BitmapOriginal;
  Graphics g = Graphics.create (temp);

  Font myFont = Font.getDefault ().derive(Font.BOLD,13);

  StartcountDown.setFont (StartcountDown.getFont () .derive (Font.BOLD, 15, Ui.UNITS_pt));

  int xOffset = (int) ((BitmapOriginal.getWidth () / 2)-(Font.getDefault().getAdvance(Integer.toString(startCountDown))/2)); (temp.getWidth () - Font.getDefault () .getAdvance (Integer.toString (startCountDown)));
  int decalage_y = (int) ((BitmapOriginal.getHeight () / 2)-(Font.getDefault().getHeight()/2)); (temp.getHeight () - Font.getDefault () .getHeight ());

  g.setColor (Color.WHITE);
  g.setFont (myFont);

  g.Clear ();

  g.drawBitmap (0, 0, BitmapOriginal.getWidth (), BitmapOriginal.getHeight (), BitmapOriginal, 0, 0);
  g.drawText (Integer.toString (startCountDown), x_offset, decalage_y);

  PicAndText.setBitmap (temp);
  }
  ... }

  You can't disable text written on Bitmap. However, you don't have to write the text on the original. This:

  Bitmap temp = BitmapOriginal;

  won't. You copy not the original - you get a reference to it.

  Something like that

  Bitmap temp = new Bitmap(BitmapOriginal.getWidth(), BitmapOriginal.getHeight());
  Graphics g = Graphics.create(temp);
  g.drawBitmap(0, 0, temp.getWidth(), temp.getHeight(), BitmapOriginal, 0, 0);
  

  copies BitmapOriginal in temp, leaving intact and ready for the next use. The trick is to create a new bitmap every time to handle.

• How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  It does not work like that. It cannot be scheduled for a specific time.

• How if the stop message loop when I put looped at a specific time.

  I don't know how while loop stop at a specific time. Generally. While the loop stops when we enter into stop button or mistakes have been made. now I want to while loop stop at a specific time, 40ms, 20ms and so on. How can I achieve that. Thank you!

  Use the number of cycles. Get the current number of cycles when you run this loop.  Add your time (20 ms) to the starting value, creating a 'downtime '. At each iteration number of cycles review and compare the current value of the value 'stop time '.  If it is higher, then stop, otherwise continue.

  Note that on an operating system, you will see some jitter in trying to use loop as small as 20 ms times.  You may need to go to a real-time, or something hardware system timed for any accuracy or stability to these time scales.

  Lynn

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• How to program Windows Live Sync to run at a specific time?

  I am trying to program Windos Live Sync to start and stop at certain specific times. I tried with the Task Scheduler"of Windows Vista, but it not start when I expected. Any suggestions?

  Thanks in advance!

  It will cost you a few logging you can check for errors, as well as the credentials of the user that the task will run under.

  Scheduler tasks and Robocopy batch
  http://www.howtofixcomputers.com/forums/Windows-Vista/Task-Scheduler-Robocopy-batch-job-69002.html

• HP DV7-4050ea: Date &amp; only time not updated DV7-4050ea

  I have a HP Pavillion DV7-4050ea. Whenever I restart the computer, the date time not not to date. I changed the battery (CR2032) without result. Is this what can I do to make sure of the correct date and time of updates every time I restart the computer.

  Hello

  Try to manually set the date/time of the bios again.

  You should see that the first field highlighted is the time value - set this to the correct time by using f5 and f6 (f5 will reduce the number & f6 it will increase).  When it is correct, press ENTER to highlight the Minute field and again, use f5 & f6 to set the correct minutes.

  When finished, press the arrow down to select the first Date field.  This should be for the month, so using f5 & f6 to enter the correct value.

  Press Enter to highlight the field day and this, and then press ENTER to highlight the year field and then set this.

  If you are happy with the settings of Date and time, press f10 and press ENTER to save the settings and exit the bios.

  Let windows load completely.  If the Date and time correct does not appear, go to the control panel and set the Date and time correct here.

  Restart computer and check if this has fixed the problem.

  Kind regards

  DP - K

• How can I configure my computer stops at a specific time?

  I know that I can set up Parental controls for other users, but I would like to be able to set a time limit so that the computer turns off. Is this possible?

  Thank you for your helpful suggestions.

  Loretta

  You can create a scheduled task that runs at a specific time every day. Its command line would be like this:

  stop, s, f, t 300
  The command will generate a group of pop up at the specified time, and then shut the computer down to 300 seconds (= 5 minutes) later. For information about how to create a scheduled task, click Start, click Help, then look for help on the scheduled task. When you create the task, make sure that it is running under the account 'System '. Initially, you must specify a time of 15 minutes now so that you can test the task shortly after it is created.
  If you find it intimidating to create a scheduled task then here is a simpler method:
  1 log in under an administrator account.

  2. click on the start planet.

  3. type the three letters cmd in the search box.

  4. press on Ctrl + Shift + Enter

  5. click on "run as Administrator".

  6. type the following commands and press ENTER after each:
  -22:00 / every: m, t, w, e, f, s, su shutdown.exe/s/f/t 300
  (to create the task described above. It will take place at 22:00).
  to
  (to see a list of all jobs created with this method)
  1/led
  (To remove the job #1).

• Choose that an audio specific time cannot define a specific "fade effect".

  Choose that an audio specific time cannot define a specific "fade effect". for example, I want to put a specific moment of the audio selected is set to-20dB fade effect (audio will not disappear), but I can't find this setting.

  Well, if you don't answer ryclark question, I'll tell you how you do in the waveform. If it's wrong, it's because you haven't we given the necessary information...

  Select the part of the wave that you want to fade out and open Effects > Ampliltude and Compression > envelope bland (process). Now select the preset "smooth fade out" and on the yellow line that is displayed, drag the end point + 10%. This will leave the audio 20dB above silence. Then apply this. You can save it as a preset if you want, and you can also change or add extra points to the wave of fade, change the way it fades.

• CS6 installed but always try count down?

  I got a new mac laptop and transferred everything on the form of the former. When I opened the CS6 on the new computer, it gave me a message of trial encouraging me to buy. I called Adobe, gave them the serial number, they sent me the download link I need, I downloaded and installed successfully. Went open CS6 and count down the trial itself opened in Acrobat reader, informing me that my trial ends in 29 days. What happens here? I bought eyelash. installed software. Why he always thinks that I am in the trial?

  Uninstall your cs6 and clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  then install properly using the installation files.  do not migrate/transfer/copy etc.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Stop processes replicat at specific time. GoldenGate

  Hi all

  I have a requirement I need to stop all replicates to 01:00 in the morning every day.

  I have read on the stop of eventactions option but, I do not get a specific solution that how to use STOP to stop replicates at specific time.

  Any type of assistance or advice will really help towards a solution.

  Thank you

  Delaure.

  Hi Matthew,

  Sorry for the late reply on that.

  stop_all_replicats.script stops the replicates on target at 01:00. But their may be some scenarios where the replicate itself is overdue in this case the data will be not accurate as of 01:00.

  So we created a table in the source and scheduled a cronjob to update this table at 01:00. When this folder is replicated the replicat stops with the stop eventactions.

  Thank you

• find data between specific times in a date range

  HII all,.
  I'm pretty new in PL/SQL so any help will be greatly appreciated. I'm trying to retrieve data from a set of tables. one of these tables has a field that is a timestamp in the format «dd/mm/yyyy hh24:mi:ss» field asked me to produce data for records that were created between 16:00 and 20:00 between 01/01/2010 and 31/08/2010. I can eat the date of issue, but the question of time is that I'm stuck.
  
  your help would be appreciated

  SELECT *
  FROM my_table
  WHERE col_date BETWEEN DATE '2010-01-01' AND DATE '2010-09-01'
  AND TO_NUMBER ( TO_CHAR ( col_date, 'HH24MI' )) BETWEEN 1600 AND 2000;
  

  Now something difficult:
  A DATE data type represents a specific time. It's something abstract. There's no format. It is in some cases stored internally, but we know not how (in fact, we know a little). Cannot directly display a DATE value - it is not a text, it is a point in time, it can be established on a calendar and a clock, but not on the screen. DATE FORMAT allows us to tell Oracle how we want it to be converted into a string and displayed. Do we want to day/month/year or year/day/month? Do we want a 24 hour clock 12-hour am/pm or? The same value, the same point in time can be displayed using different channels, produced using different DATE FORMATS. "Friday, September 17, 2010 13:15" is exactly the same point in time as "2010-09-17 13:15" - the only difference is the FORMAT. This allows us to perform several clever tricks with DATE data. Ok?
  (If you do not specify a DATE format, and then there are the values by default for your session and for the database. But the principle remains the same: a point-in-time value is converted to a string using the DATE FORMAT).

• specification does not match any newspaper archive in the recovery catalog

  RMAN > delete archivelog until time = ' sysdate-15';
  
  output channel: ORA_DISK_1
  output channel: ORA_DISK_2
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 151 devtype = DISK
  allocated channel: ORA_DISK_2
  channel ORA_DISK_2: sid = 143 devtype = DISK
  specification does not match any newspaper archive in the recovery catalog
  
  
  Database 10.2.0.3.0 on win2008 (VMWARE)
  Thank you

  Honey says:
  RMAN > delete archivelog until time = ' sysdate-15';

  output channel: ORA_DISK_1
  output channel: ORA_DISK_2
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 151 devtype = DISK
  allocated channel: ORA_DISK_2
  channel ORA_DISK_2: sid = 143 devtype = DISK
  specification does not match any newspaper archive in the recovery catalog

  Database 10.2.0.3.0 on win2008 (VMWARE)
  Thank you

  There is no archived redo log file corressponding your query. There is no archived for 15 days ago redo log file