Cover/Stand for ThinkPad Helix when it is used in the form of tablets - all Solutions?

Similar Questions

• PC/tablet-is there a laboratory touchscreen top that works on windows 7 / 8, where the screen can detach the keyboard to use in the form of tablets, or screen can be reached for keyboard vertically or horizontally?

  Labtop / Tablet question -I'm shopping for a new Labtop.    Is there a laboratory touchscreen top that works on windows 7 / 8, where the screen can detach the keyboard used in the form of tablets and then transformed (with long vertical side) and attached to the keyboard to type a length full page (8.5 x 11 page) and then returned (long horizontal side) one attached to the keyboard (to be used as a stand) for a movie with all the features of present characteristics of a top laboratory such as 4 to 8 GB memory and a 500 GB hard drive (perhaps as part of the screen or connected to / through the keyboard, if it is used as a docking station)?

  It seems with all the technology of the tablet on the market that Microsoft or somebody would do something like that now.  Can someone help me? Thank you

  -Scott M

  PS: My wife has an ASUS transformer where the screen detaches from the keyboard, so it can be used in the form of tablets.  When it is attached to the keyboard, the keyboard acts as a stand to sit on the counter for watching movies.  And then the keyboard and the screen can fold them together, so when it is closed there is a stand-alone case. This, however, runs the Android operating system.  Basically, I want this same design (for the potability in a Briefcase), but with it running Microsoft Windows so it can be used as any other labtop.  It the keyboard could have a number pad are associated with, that would be a bonus.

  Hi pr-e-s,.

  You can check with asus.

  http://us.Acer.com/AC/en/us/content/home

  http://us.Acer.com/AC/en/us/content/group/notebooks

  http://us.Acer.com/AC/en/us/content/group/notebooks

• I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  Hey paulc6148125,

  Please try the mode settings different button in Adobe Acrobat Reader DC-> leModifiermenu-> preferences-> general categories.

  Kind regards

  Nicos

• Illustrator appears blur and pixelated when it is used on the addition of a big Apple screen.

  Illustrator appears fuzzy and pixelated when used on added Apple Retina oke.

  It is clean when it is used on the MacBook Pro screen. What to do to get clean too on the big screen?

  I don't know if anything it either in this area changed between 2014 and last updated, but may turn performance GPU and off and notice the difference?

• I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  Hi Eileen97933052,

  The PDF form must be extended drive in order to have this feature to save & print the form data.

  Please confirm by the PDF Creator is the PDF reader or not extended.

  Otherwise, if you have Acrobat installed on your system, you can reader extend PDF form yourself.

  Kind regards

  Nicos

• 57F error code I have Vista and I am running MS Office 2002 for students. When I try to install the updates, I get this error code. Until a few months ago I had no problem with the installation of updates for MS Office 2002

  Ideas:

  • Programs that you have problems with MS OFFICE 2002
  • 57 E error messages
  • Recent changes made to your computer NO
  • What you have already tried to fix the problem error code search

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi halecky6,

  Welcome to the Microsoft answers site!

  (a) update you are trying to install? (It would be better, if you can provide the number of KB)

  (b) are the other updates related to Windows from installing on your computer?

  I suggest you try the following steps:

  Step 1: Disable the software security and then try to install the update

  Note: Activate security software once the test is completed.

  Step 2: Download and install the update in the clean boot state

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  After starting the computer, download the update manually and try to install it.

  http://www.Microsoft.com/downloads/en/default.aspx

   

  Note: Return the computer to normal - reset the computer to start as usual (follow step 7 in the link) once everything is done.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  You can also post your question on the office community, please visit the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Asian locale?  Installed Acrobat XI for Windows, but when I try to run the program, it happens in some Asian locales - can not read anything!

  Hello

  I am setting up a new laptop and downloaded Acrobat Pro XI for Windows computer.  Download and install seemed to go fine, but when I try to run the program, it is coming in a few other locales (not French_FR).  What should I do to configure the program for the locale in the United States?

  (running Setup 3 times (to fix, modify, uninstall/reinstall), but so far nothing has worked.)  Even after uninstalling/reinstalling (where I deselected the local Korean), the program still continues to flow upwards in an alternate reality!

  Help, please!

  Thank you

  -fastkeysx

  Hi Vicki,

  Have you tried toggling this setting under Edit > Preferences:

  

  Kind regards

  Rave

• How to make the Subvi when I make use of the structure of the event

  Hello everyone

  I don't really understand how to make use of Subvi when I use the event structures in vi?

  When just make buttons on the controls Subvi connectors and assign them the vi stops working as I expected.

  I've added an example vi I do not operate as a Subvi.

  Thanks for advantage.

  I think raise you an event to change value via the input connector, that you hope to do. One ugly semi solution is to get the button references and make a Value property (Signal).

  A better solution if you want Hasina events in a subvi is to record user events and send the registry-event thread for the sub - vi, where you can use these events to the event structure. Check that the user created events and examples of dynamic event.

  /Y

• Why raw of Sony DSC-RX100M3 air files strange in PE9 when flash was used in the shot?

  I just bought a camera Sony DSC-RX100M3 and use in RAW + jpeg.  I want to use in my Photoshop Elements 9 raw files, having the Camera Raw plugin version 6.5.0.216 installed. I downloaded the Adobe's DNG Converter 8.7.1.311 version so I can import my Sony raw files into EP 9 because they cannot be used directly. Most of the time these files raw look OK, but when I use the flash on my camera and then look at the raw files in PE9 they seem much more pink than jpeg files. Jpeg files are more or less similar that I remember the scene when I took the picture.

  When I look at the same raw and jpeg in Sony files have (version 4.2.04.17270) software Image Data Converter the raw and jpeg files are similar to one another and there is no colour pink cast in the raw file.

  What I am doing wrong in Photoshop Elements? I have the DNG Converter retains all the information from the original raw file and makes no changes, so why not the raw file look so different when flash was used?

  Thanks for any help you can give!

  AVM

  I interpret the differences that you see the difference between the Adobe Standard camera profile and that Sony made with the colors.

  I can get things to look more like what you see in-camera jpg by simply changing the Adobe Standard camera to camera neutral profile on the camera Calibration tab.  I don't remember if PSE9/ACR6 has these available camera simulation profiles or if you has that Adobe Standard.  If you have the other, then switch to the use of one of them.

  Here's what the image looks like in the last Camera Raw plugin 8.7.1 to PSE13 after having chosen the camera neutral profile that looks less magenta and more green as the JPG:

  

  I think that part of your question is that you have mixed lighting where the light blue flash is mixing with some slightly more hot (incandescent) or (fluorescent) green color to the right side is hotter than the left side.  Apart from the differences in color, there is also a shadow in the foreground, perhaps caused by your sun visor that should be eliminated or your goal is too long to use a flash that relatives or something.

• StructCount bug when deleting a key of the FORM field

  Help, please.  I can't understand what I'm doing wrong.

  When I try to remove a key from the FORM field, the StructCount to the extent of the FORM remains unchanged, even if the key doesn't seem to be within the scope of the FORM any longer.  This is not the case when I create a struct in the scope of VARIABLES.  I enclose the code I used to test this.

  Is this a bug with ColdFusion?  Is there a fix / patch for this?  I use Coldfusion Enterprise version 8,0,0,176276.

  Unfortunately, I don't think you can avoid it as it seems to be a problem with the underlying FormScope class.  You could wrap your alternative 'counting' code in a cffunction.  Which would keep at least the logic in one place:

• When you import contacts from the sim data are all put under the wrong labels. Is there a way to avoid / repeat this

  The data on my phone is an example: it took my familyname as my name as a phonenr. And my phone number as an email address. So far I've found the manual update as a solution. It would be less painful to set on a desk somehow...

  In my case, it did not recognize same contacts on my SIM card.

  If you have contacts in vcard format, with export/backup to memory card on an old phone, or under sync your desktop and exported from there, you can use vcardin on the market to import vcards from a memory card.

  The phone still has tons of problems/bugs related to contacts; You cannot batch delete, for example. Many of these issues are already fixed in newer versions of Firefox OS, and others are included in the road map.

  For now, this solution took my 800 + contacts more or less correctly loaded.

• What license purchase is required for Adobe Stock images to be used in the video?  Is that the price of the standard for Adobe Stock images license enough?

  Hi, I'm producing a film.  To purchase Adobe Stock images, what license is required to purchase images for use in video?  Is that the price of the standard for Adobe Stock images license enough?  Thank you

  How images are used in the video and the purpose and the circulation of the video?

• iPad Pro cover/Stand for movies in bed

  Hello

  I got my mom a Pro iPad mainly so that she can watch movies and tv shows on netflix. And usually, she likes to watch in bed. It allows to use his Macbook, which she lay on the mattress or uneven rugs and just look.

  Now, with the iPad pro, it's more complicated because the Smart Cover requires a flat-ish surface so that it can act as a stable support. The bed and covers with one person changing the position sometimes makes the iPad tilt to the wire and in the fall with the Smart Cover.

  There really are tons of products out there. If anyone has experience with specific coverage or support or the lid/base that works well in bed with iPad pro, let me know!

  Thank you

  Nick

  Targus make a case that might be appropriate, but I think it's heavy in daily use. Depends on if you only watch movies.

  TArgus VersaVu premium 360deg revolving pro Ipad case. I am in the United Kingdom and was bought from John Lewis.

• I downloaded FF 8.0 for Mac. When I drag it to the applications folder, I get an error that says that I don't have permissions to install it. What should I do now?

  How to change the permissions? I had the option I have to get the permissions window, but I don't see that I can change anything

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• BlackBerry Smartphones for business enable when you try to add the email account

  Hello

  I recently got a BlackBerry Torch 9860 running OS 7.1 and I try to add my personal GMail account. However, whenever I try to add an email in the menu setup, he invites me 'enable Enterprise. "

  Is there a way to disable this? My phone is personal and it is not related to any company.

  Thank you

  gajariam

  Without a blackberry data plan, that you cannot set up an email.  You must get this plan first.