Crash & iPad2 restarts

If crush when I add a 2nd pic for my project it crashes hard & restarts my iPad 2. I tried twice and it crashed and rebooted each time.

Hello. I'm sorry to hear that PS touch crashed on your iPad 2. It seems that the memory gets low on your device.

Apps how do you have running?

Have you tried that after a reboot of the device with only to have PSTouch running?

-

Guido

Tags: Photoshop Touch

Similar Questions

  • iPad Air keeps crashing and restarting

    Why my iPad Air keep crashing and restarting in Safari? I also think other applications. iOS 9.3.2 must be the culprit because it never happened so often. Any solution?

    Go to settings - Safari - clear the history and data from the Web site.

    If that doesn't work, reset your device. This will not erase your data stored on the phone.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • Satellite A500 - crashes and restarts when I play games

    Help, please

    For these last months, I had a problem with my laptop crashing and restarting in 10-20 minutes from a game.

    Please help, give me ideas or tell me how to find out what the problem is, I have read a few other discussions to talk about questions of heat but no real answer on how to solve the problem.

    Help, please
    Thank you
    D

    Hi Dale.Johnston,

    Overheating would be a typical pattern of this behavior. I mean, that's if the laptop has a higher internal temperature and it will immediately fit to protect the equipment. Then it the normal behavior of s from overheating.

    Overheating may have different reasons. In most cases it's dust that blocks the fan. This would mean that you have to clean the cooling system of your laptop using the jet of compressed air to blow the dust from the cooling fans.

    Generally, it should help. If this isn't the case, I would check the display driver. What display driver and operating system you are using?
    If you install the display driver Toshiba not they can also cause overheating if it recommendable s using Toshiba pretested drivers only. ;)

  • My computer crashes and restarts with windows xp but it does not occur with any other OS

    When I use windows XP, 2000, ME, 98 in my computer (Dell latitude D600) it crashes and restarts all of a sudden. But when I installed winodws vista, 7 or ubuntu it will never happen. I thought that the problem could be drivers, so I ran my computer only with windows XP, without installing any driver, but it happens again. I already send my computer to dell and they changed everything in the computer, but I still get the error. What can I do to identify and solve the problem?

    Hello cocodrilo,.

    Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP, 2000, ME, 98 multiboot and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/categories/

    Thank you

    Jack

    Jack
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Explorer Windows 7 keeps crashing and restarting and it doesn't recognize me as an administrator

    Hello!

    I share the same problems as many users posted, then some a few years ago.

    1 Windows 7 explore keeps crashing and restarting

    a. I've done your first suggestion witch was copy Explorer. exe in system32. Does this rebooted and the problem continued.
    b. began to gain in SafeMode (same problem) and then all the stages of boot minimum troubleshooting to find the root cause of the problem.

    None of those who have worked, and I still have the same problem. So I tried commandprompt and running "sfc/scannow". Then came the following problem:

    2. I need an administrative authorization.  (I'm the owner of the computer and work through an administrative account).  How can I get Windows to recognize me as an administrator?

    Thanks in advance for your help

    Best regards

    Liliana

    None of those who have worked, and I still have the same problem. So I tried commandprompt and running "sfc/scannow". Then came the following problem:

    2. I need an administrative authorization.  (I'm the owner of the computer and work through an administrative account).  How can I get Windows to recognize me as an administrator?

    Hello

    You must run the shell in high mode (Administrator).

    Click on start / all programs / accessories.

    Right-click on the command prompt, and then select the run as Administrator option.

    Run SFC/scannow in the command window.

    Concerning

  • Guard Windows Explorer to crash and restart on Windows 7

    I use a Dell Vostro V13 laptop. Last night suddenly kept windows Explorer crashing and restarting over and over to the point where I can't do anything. I tried the system restore, but the problem is still there. I can't do anything except the exit ramp of the computer with Ctrl + alt + delete. As soon as the restart my laptop the message back and he stops and restarts over and over again.

    I am only able to send this message in SafeMode where the problem occurs.
    I'm not very computer literate, so would be grateful for a detailed step by step help.
    (One of the reasons could be that I tried to update media player VLC, this accident occurred just after that.) I uninstalled VLC but with no avail, explore it crash)

    It is clear the details of the second error problem is the DivXMFSource.dll:

    Fault Module name: DivXMFSource.dll

    Fault Module Version: 1.0.0.72

    Timestamp of Module error: 4cffcf66

    The DivXMFSource.dll is a component of DivX software.

    Uninstall of DivX software should fix the error.

    You are able to do safe mode?

    If not go to the DivX program folder and right-click the DivXMFSource.dll and rename the extension .dll to .old, IE rename DivXMFSource.dll in DivXMFSource.old.

    Restart the computer in Normal Mode and uninstall DivX.

    Here is the location of the DivXMFSource.dll to rename:

    If 64-bit Windows 7:

    C:\Program Files (x 86) \DivX\DivX DivX Media Foundation Components\DivXMFSource.dll

    If 32-bit Windows:

    C:\Program DivX DivX and Media Foundation Components\DivXMFSource.dll

  • Windows 7: Windows Explorer keeps crashing and restarting

    Hi all

    I've had the problem for a few weeks now and it's really annoying. As the title says windows guard Explorer crashing, then restarting itself. In general seems to happen when I am clicking on my files. When I try to rename a file or folder, then it happens a lot. Less when the opening everything.

    I'm using a relatively old Samsung laptop. Probably had around ish 2009. Don't know what other info can be useful. Let me know and I'll do my best to find out.

    I did not do anything to try to remedy the situation that I didn't know what to do. Any ideas?

    Thanks for the help

    To solve most computer problems, it allows to watch the evidence available in the system information file and Event Viewer logs. An experienced eye can choose needles in a haystack and see more clearly the precise nature of the problem or problems.

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

    Please download and share with everybody fresh copies of your System and your event viewer on your Player Application logs One (formerly Sky Drive) and post a link here. You can delete the earlier copy of your OneDrive records.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:
    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

    General remarks on event viewer
    http://www.gerryscomputertips.co.UK/syserrors5.htm

  • Windows 7 Windows Explorer keeps crashing and restarting every 10 seconds.

    I have a problem with the Windows Explorer. It keeps crashing and restarting every 10 seconds as soon as windows loads. I got in safe mode, and this error does so. My computer is free from virus/spyware etc...

    Thank you for your support in advance. I need to solve this problem quickly, I would appreciate your help.

    I have Windows Home Premium 64 bit

    4 GB OF RAM

    2.4 GHz

    NVidia GeForce GT 320M

    Thank you for your help, but I tried something else. What you suggested, it was too complicated for me :) I restored Windows 7 to the point before the problem started (which was a recent Java Update December 26) and even if he says that restoration could not be complete, it seems to be invalid the latest version of Sun Java and Windows Explorer now works as it is supposed to.

    I have a new question now, if update SunJava caused my windows Explorer keep crashing how can I keep the java software to install this update again? Thanks a lot for your help.

  • iMac 2015 randomly crashes and restarts

    I have a 2015 27 "iMac 4 GHz with 32GB of RAM from OWC and necessary devices connected via USB and Thunderbolt running El Capitan (updated) and are experiencing random crashes every day.

    Most of the time I'm just browsing through Safari. All of a sudden, the machine crashes, including the mouse pointer and after about 10 seconds the machine will restart and everything is back to normal, as if you start the machine manually. So, no messages saying: it was an unexpected stop, no accident recover/journalist, nothing.

    Checking the logs is without kernel panics. The only thing I can find in the system.log is a recurring cause:-128

    Encounter the same problem or does anyone know what this error code is talking about?

    (Devices: Sonnett Express SE II with Blackmagic Decklink and ATTO HBA H680, mini monitor that connects to a tape drive HP Ultrium 3000 SAS, a TVS - 871T, a Wacom Intuos 5 QNAP NAS and some card readers.)

    Thank you for posting a report EtreCheck of your system, and we can look for obvious problems. Please click on the link, download and install the software and run the report. Then copy and paste the report to your response to this message.

    If you want to know more about what is EtreCheck, just click on the link.

  • iMac crashing and restarting on its own

    Hi all

    My iMac has been crashing lately and restart on its own. After trying to solve what was going on, I noticed that, just before these accidents occur, the following 2 warnings repeatedly appear on the Console:

    kernel [0]: could not open the file 2

    kernel [0]: vm_swap_create_file @ 1554 dry failure

    During the inspection, I realized that the var, there is no /vm folder and, therefore, no swap file, that made me suspect that the problem is related to virtual memory.

    I tried to launch an intensive application of memory while monitoring the use of memory through Activity Monitor and, of course, when all memory is used, the system crashes. Used swap shows 0 bytes at all times. In comparison, my MacBook Air has always a certain amount of used Swap data, even if some memory is used.

    I tried to verify if the virtual memory was somehow disabled, by using 'sudo launchctl load-w /System/Library/LaunchDaemons/com.apple.dynamic_pager.plist' but it seems that the service is already loaded.

    I'm at a loss and need help. Someone at - it clues about what is happening?

    Read this previous post of the Apple community...

    Boot the system using all the memory of my app and have to restart every few minutes. Chrome and firefox only apps that seem to cause the problem. Someone at - it suggestions? memory Mac early 2009 16 GB pro

  • Satellite A60 crashes and restart the cycle - missing or damaged system32\DRIVERS\Ntfs

    I have a Toshiba Satellite A60, who has recently developed a serious problem and is currently blocked in a crash restart cycle. He started with the message "missing or damaged system32\DRIVERS\Ntfs", I've read about this problem on discussion forums, but am still unable to find a solution.

    Currently on start error messages appear indicating a driver is missing or damaged, the Toshiba start page has vertical lines of missing data and on a few occasions it will fully start after a short period of time vertical lines appear on the screen and it crashes.

    I tried a number of bugs:
    * Re installed windows XP pro (formatting the hard drive and renew the partitions)
    * Update the bios on the site of toshiba in version 1.90 (I think that the update also flashes the bios, but would need this confirmation?)
    Swapping the hard drive with a portable, yet no longer starts and HD works fine in another laptop, dismissing the possibility of missing or corrupt files.

    I realize that this could be a problem with the RAM and think that the laptop has 512 fixed to the motherboard, accessable without stripping down, but do not know how to determine if the RAM is the problem. While trying these fixes, I get problems with the start of the player and can only get the disk to launch and recognize the CD about 1 to 10 times.

    Could someone suggest a remedy or a fix I can try? or suggest how they fixed a similar problem. Thank you very much

    You ssounds not very good ;(description
    The hardware malfunction appears to be responsible for the vertical lines on the screen
    If vertical lines appear also an external display, the jury may be wrong.

    You re right, I Googled, and it seems that Sat A60 supports an internal memory.
    As far as I know, this memory cannot be removed and only an electronics could solve this internal memory.
    But are you sure that the internal memory is impaired. The device supports only 256 MB internal memory and other modules are removable
    If you can try to replace

  • My computer will crash and restart randomly

    OK, I have problems of crash/restart. It seems to crash/restart only when left alone for more than 5 minutes I got the BlueScreenView and here's what he says.

    DRIVER_IRQL_NOT_LESS_OR_EQUAL
    BCC 0X000000D1
    BCP1 0X00000000
    BCP2 0X00000002
    BCP3 0X00000008
    BCP4 0X00000000
    TDX.sys tdx.sys + 111e0 TDI translation Driver Microsoft® Windows® operating system Microsoft Corporation 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) 32-bit C:\Windows\minidump\Mini110709-01.dmp

    Where can I go from here and how to fix it?

    Hello

    Your name is messed up, does not appear.

    Windows 7 and Broadcom but also others? Update on your network (NIC) and the WiFi drivers.

    Perhaps this fix applies:

    Error message when you use applications that rely on former Transport Driver Interface (TDI) filter drivers
    on a computer that is running Windows 7 Beta or Windows Server 2008 R2: "STOP 0x000000D1".
    http://support.Microsoft.com/kb/967891

    AVG, Kaspersky and other anti-virus products have been know to cause this problem.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Guard Windows Explorer crashing and restarting

    Hi all

    I use Windows 7 Home Premium 32 bit on a Toshiba laptop. Yesterday afternoon, this "Explorer stopped responds" / "reboot...". "begun loop that I couldn't solve. I was not doing something special when he started to occur, no new installs, no new program, just browse the Internet with Chrome, Firefox and Internet Explorer Beta (all 3 for various reasons not related to the problem). Here are the things I've tried so far:

    1 system restore - unable to do because apparently, even if it was lit, "0" space has been assigned to the and there is no restore point
    2 safe Mode - does the same thing
    3. clean the Boot - did the same thing
    4 sfc/scannow - no integrity problem found
    5 chkdsk - no problems found
    6. Norton Internet Security 2011 Full System Scan - no problems found

    I spent over 6 hours trying to solve this problem, including 2 Norton analysts, trying to help through the support of the remote control. Only thing, they found a malware 'hack' through a combination of a-squared one of them installed, removal of which had absolutely no effect on the problem.

    I was able to disable (complete the process stops the loop but it means that I have no bar of tasks/desktop/folders)

    Any help would be greatly appreciated and thank you.

    (If possible, I prefer not to reinstall windows, format my hard drive or install a third-party program to "fix" for this problem)

    Just to make the clear solution for future reference:

    Go to Event Viewer (open Manager jobs by Ctrl + Alt + Delete, click on 'file'-> 'break-in' type "eventvwr.msc" for Event Viewer) to see what type of program is made a mistake in addition to Windows Explorer (2 errors showed on every restart Windows Explorer). Look at the path of the file for the second error. E.g.

    Activation context generation failed for "c:\program files\real\realplayer\plugins\rmxrend.dll." Load Assembly Microsoft.VC90.DebugCRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8" was not found. Please use sxstrace.exe for detailed diagnosis.

    Note the main program (in this case realplayer). Then follow these steps, in order, until Windows stops crashing:

    1. ensure that the problems causing program is up-to-date, otherwise, update.

    2 Uninstall (go to the Manager of task-> type 'file'-> 'run' in "appwiz.cpl" for Add/Remove Programs)

    3. If #2 working, reinstall it and see if the problem is still present. If this is the case, uninstall and keep it uninstalled.

    My problem was caused by RealPlayer and went away once I uninstalled it. My realplayer has been updated and reinstall the back problem, so bye bye realplayer.

  • Windows 7 keeps Windows Explorer to crash and restart when I try to access my videos folder? Windows 7 32 bit

    When I try to access my videos folder via windows Explorer, it crashes and trys to restart but never did... so boring

    Hello

    I suggest you to follow this thread which has helped to solve a similar problem.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-Explorer-restarts-when-opening-certain/506c9f1f-4B03-464f-AD67-298729166aad

    I hope this helps.

  • CS6 InDesign crashed, cannot restart (lack of fonts, cmap files). Reinstalled - does not work. Help?

    Hello

    my indesign CS6 worked perfectly until yesterday afternoon, when it crashed and wont open again all of a sudden. all it says is "there are fonts missing required system or cmap files. "Reinstall indesign." Done, with the cc cleaner, but it does not work!

    works on windows 7, sp1 - never had any problems.

    everything I can find in other forums on the cs2, which is quite outdated. Why this happens to you? all my other programs of the master collection work very well!

    Okay, after a frustrating weekend, the problem seems to have resolved itself. what I did (for future applications):

    -Downloaded cs6 master collection (since I had my CD not with me)

    -install old desinstallion

    -wipe the system with the cleaning of cc adobe tool everything down

    -Restart

    -install cs6

    -same error. no chance to do anything.

    I then installed a trial version on another computer to render at least my pdf. Then I tried something new: I put the WCPA & fonts (in C:/programs/Common Files/Adobe/PDFL) from the pc to work on a USB key. When I "supported" my PDFL folder on my pc main in a zip (just in case), I gave indesign another try. Then he started upward - since it was the first time a little slower than usual, but it's on track.

Maybe you are looking for