Create a form of line segments - is it good?

Similar Questions

• Now shift isn't snapping line when you use the line Segment tool

  I could be wrong and it has always been like that, but when I take a shift to rotate a line created by using the line Segment tool turns is more degrees as I thought that it used to. I checked and it works always with the Rectangle tool, but not when I traced a line. Guides and snap to Point are both on.

  Is much more annoying when I'm dragging an end point and it will remain at an ideal level of 90 or 45 angle... but nevertheless it remains valid this angle when I paint, just do not change.

  Matt,

  You are not alone.

  See this thread with a link to the other thread:

  https://forums.Adobe.com/message/8274663#8274663

• Creating a form of multiple lines

  Hey,.

  I am a student of geology and need to create a column for the stratigraphic record. Contacts between the units can be erosion and are drawn with line round zig - zag.

  I drew the outside box of the column and simple traces for contacts.

  Now, I need color units in various colors. (see photo)

  

  I tried to join paths, create a compound path, and a group of live paint, but whenever I do that, the zig zag effect is removed from the segment.

  Is it possible first to remove the feature of the direct effect of the zig zag path, so it is not changed when you create a compound path?
  Or is there a much simpler method to create these forms?

  Thanks for your time and your help and please excuse my English

  Cheers to the Germany

  Your English is very good. Select the two lines in zigzag and the menu object, choose Expand or break down the appearance (if available). Then take the Brush tool and click on each area you want to be a filling. Then fill with the color/pattern that you need.

• Created the form based on the table - created new line - how to retrieve line editing?

  Hello

  Sorry for such a stupid question, but being new in APEX, I don't know much about how the end user on a form.

  I have created a new form (not in a table), based on a table.

  I ran the form and created a new line.

  After the line was created, the form comes back ready to create another line (all the values in the fields).

  How can I go on the recovery of the line, I added just to make a few changes?

  Again, please forgive my ignorance.

  Mason

  Masong says:

  Sorry for such a stupid question, but being new in APEX, I don't know much about how the end user on a form.

  Or about how best to use this forum. Always include all the details of your environment and your application when you post a question so that we can provide a solution version - and context, case-specific: How to get the answers from the forum

  I have created a new form (not in a table), based on a table.

  I ran the form and created a new line.

  After the line was created, the form comes back ready to create another line (all the values in the fields).

  How can I go on the recovery of the line, I added just to make a few changes?

  Ensure that the attribute key back to point in the line process of... The ARP process is defined to return the value of PK of records inserted in the element of key primary page and delete any Reset Page clearly session state process created by the wizard page.

• By creating a form that has several text boxes to a single character on the same line, how can I get the cursor to go in the next text box automatically after inserting a character?

  By creating a form that has several text boxes to a single character on the same line, how can I get the cursor to go in the next text box automatically after inserting a character?

  Create a text field and use the option 'comb n characters.

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• Why the form I created automatically t complete line down?

  I created a form with columns. People filling out the form in one of the columns, enter an x to indicate the status of the project (to come, on the target, behind, not known.) All fields are working well except one. In this special column "not known", it automatically fills all columns with a 'x '. No idea why and how can I fix it?

  In this case, make sure that your fields have a unique name. The fields with the same name will automatically have the same value.

• Cannot be joined lines when using the line Segment tool

  So unfortunately, I've updated to the latest version of Illustrator Cc (V19.2.1). And to my horror, I can no longer draw a line (with the line segment tool) then draw another line, coming from the previous those anchor point. When I try to shoot immediately. He's trying to turn the line rather than create a line joining... anyway to change that or am I stuck with it?

  (Also, I use windows currently..)

  http://Tinypic.com/player.php?v=iqc0mc & s = 9 #. Vr5gifJ95hE

  I don't know if you can say/see/see in the video, but here's the process that I'm following departure using the line-drawing the line-> > segment trying to draw a line from that anchor point (and that is the question, when I'm doing it automatically, it assumes I want to transform the line)-> changes to the tool selection and clicks on the line to deselect-> goes back and finishes object, repeating the process.

  Help me please... I'm desperate...

  It is these new life forms, a few disadvantages too with the rectangle tool, ellipse etc. tool.

  to go back to the old behavior

  Object > shape > expand the form, do a deed for him, or do what I did a hotkey (Windows 7).

  Edit > keyboard shortcuts > Menu commands > object > shape > expand the form , then in the first box to the right click in it, select and press a key on the keyboard, I choose F9, OK and name.

  It's an extra step, having to have a finger on the mouse and the other on the keyboard for each line. but I can't think otherwise.

• Convert a line segment to a line of pen

  I have a problem with several illustrator files that I get from my students. We use Illustrator to cute objects and some students using the line segment tool to create lines. These lines look like simple lines in illustrator, but after importation in our cute (lasermate v5) software, they become rectangular forms. My quenstion is, if there is a tool or a way to convert these forms in individual lines/box lines.

  I hope that makes sense, English is not my native language

  

  I have a solution. When I save my file and check the box "keep transparency" all lines remain simple lines.

• Intersection of the line segments vs hitTest

  I am trying to improve the hitTest() function.

  I have a game in development that involves robots square, rectangular wall and blows of line segment turning forms and move. Without rotation, hitTest works fine, but with the rotation, problems arise.

  Rotation 0 and square walls robots work very well. There is a small amount of funkyness with a robot rotated by a corner of the wall, but it is not very sensitive.

  The big problem is the collision of two rotated square robots.

  Can I create a function to get the segments of line that make up each robot and verification to see if all intersect. This means finding the location of eight points (using height and width and some trig to deal with rotation), find the slope of eight lines and then by testing lines up to 16 times. It would be necessary to find the intersection of each pair of robots. These are the worst numbers, some colisions can be detected or removed before that time the algorithm, but this review will be performed each image on all the robots and the walls and shots (shots might be a single line segment, however)

  Right now I'm talking about 8 robots max, maybe the walls of perhaps 5-80, 6-20 shots on screen @ 30 fps.

  It is fairly easy to create, but before I spend a day code all this, I wonder if computing requirements will make it prohibitive.

  (If so, I'll probably have to move to the circular robots)

  I feel that there should be a simple formula to find if two rectangles on a Cartesian plane intersect, but I can't find one.

  You can use a base shape hittest.  gskinner has one that it is made public, or, you can create your own using the class' of bitmapdata hittest.

• How to create the form empty in adf

  Hi I am using jdeveloper 12 c to create a web application using ejb3 and jsf

  When I drag and drop to data controls, I must add the button 'create' to create a new empty line.

  I want to get an empty form instead of display the first line in the database directly and by clicking on the button 'create'... is it possible? If it is - can anyone help me please?...

  I use jsf and jpa, ejb3 and jdeveloper 12.1.3.0.0 for presentation...

  You build a workflow bounded to it. The stubborn workflow has an activity that is always called when you enter the workflow. in your case, it the createInsert operation. That you access the page view for the form, which is now empty, as the framework comes to create a new line that you enter data.

  This sample https://tompeez.wordpress.com/2012/12/01/jdeveloper-11-1-1-5-0-use-router-to-create-new-row-or-edit-existing/ usues adfbc but you see the stubborn workflow and how it is used to create a new line or to display existing data using a router.

  Timo

• Keep not selected (\) line Segment tool

  Hello, I use the latest version of Adobe Illustrator CC and can not start a new line with the line of a previous line segment tool.

  If I start again from one edge of the line point, move from my line from the line is still selected.

  In the previous version of Illustrator od the line was comic and disabled instantly what was allowing me to continue to draw the line on the edges of the first.

  Line Segment tool does not include the option 'Keep selected' as the pen or the brush so I can't enable or disable.

  someone has an answer how I could get this line automatically disabled after drawing it?

  Thank you

  If you choose: display > bounding box (Cmd Shift B (Mac) or Ctrl Shift B (Win)), you can continue shooting without moving the line just created.

• Create a form in Indesign: text endangered field borders

  I hope someone can help! I create many forms in Indesign. I have a problem with the field borders when it is exported to PDF format.

  I set up the form fields in the Indesign Document as a graphic frames with a keyline in black 0.5pt, these are integrated in the main text of the page. These are then converted to text fields through the palette of "buttons and forms. Export pdf as an interactive pdf file.

  When first I look at the pdf file in Acrobat (or drive), it's fine.

  

  However, after typing in some examples of data some of the border disappears. I tried the form of compensation, but they are not always visible.

  

  Zoom in and out does not work. I tried to align the rule with the inside/outside/Center of the frame, it makes no difference. I tried setting the fields as floating on the page, does not work. The only solution I found is to set the border to 1pt - but it makes the very heavy form. Is there a way around this, or is 1 pt line width minimum that will work in this type of document?

  If anyone has any bright ideas that would be wonderful! Thank you.

  Unfortunately, there's really nothing you can do to control the display of the border of the form fields with borders .5pt, I see the same results as you.

• Are the new handles on the part forms live line tool? Can I turn off?

  I been wireframing in Illustrator for many years and part of my approach widely used the line Segment tool. I've just updated Illustrator for the first time in a while.

  My workflow is: select the line tool and then drag, click and drag the end point of the segment just drew and drag the end point of the last segment drawn, perhaps add and pointing arrow or some other setting appropriate at the end of the line.

  From today I can no longer do that because the segment of the line "just comic" has what I believe are handfuls of live form on which makes it impossible to start a new segment of line directly on top of the end of the line "just" segment

  I now have the tools, clear line, switch back to the line Segment tool and continue.

  I spent the afternoon frustrated and try to find a work around. Unfortunately, after so 12 plus years in Illustrator, I feel I might have to find another solution to work in...

  Is there a way to disable these new handles?

  Thank you

  I configured in F1.

• create a form

  create a form

  Create 4 lines.

  Apply the effect > Distort & Transform > zig - zag with the smooth option. Adapt to your needs

  Object > indicator appearance

  Drag the rectangle shape

  Select all

  Take the shapebuilder tool and click inside.

  Delete what is not necessary.