Create a privilege level which only allows access to view orders

Similar Questions

• If I put a restriction of password which only allow customers who purchase print it (no copy or modification of the document) have an impact on the quality of the file when people open and read the file on mobile devices like phones and tablets?

  If I put a restriction of password that only allow users who buy to print it (no copies or the modification of the document allowed)-it will have no effect on the quality of the file when people open and read the file on mobile devices like phones and tablets?

  Some mobile devices won't be able to open it at all, but if it is open, the quality is not affected.  Please note and understand the warning you get when you set security: indeed, it is largely ignored by many apps.

• Restoration to a corrupt user or copy corrupted to a newly created user. I am not allowed access to corrupt the user of another administrative user.

  When I try to copy the files from the user to a new user, the corrupt user is inaccesable when I click it.  I'm another user of the admin access.  I restarted the computer.  Does anyone have any suggestions?

  I encountered this problem immediately after removing an accessory program Apple ITunes that I have not used.  I did it to clear up disk space.  This has happened also when I got a low disk space to open the user.  I could open another admin user account and free up enough disk space to open the user.  When I try to connect to the corrupt user, it connects me to another user called (name.value of initial user followed a string of alpha-numberic characters)

  Thank you

  Hello Cscoler,

  Corruption of the profiles can be caused by malware, by repeated interruptions due to file system corruption and bad hardware issues. Did you run any malware removal software?

  When you created a new user account, have you configured it as an administrator? Do you receive error messages when you try to open a session in the corrupted profile, such as "the system has recovered from a serious error or user profile is corrupted"? When you log in the corrupted profile, are you able to view your data?

  Thank you

  James

• How to get a refund for gifts which only allow you to download?

  I gave music itunes as a gift, and they can't download music. He went to a dead link.  I had to give her money to get the music she wanted.

  Click the report a problem of receipt of electronic mail.

• Grant only read access to view Manager

  My client wants access to the Manager of the view through a browser " " https://view-Server/Admin/

  They have no access to the servers and I want to just give them read-only rights to see who is online at any time.

  I can't find anything outside by adding them to the administrators. They have rights in the region.

  Thank you

  Johan

  Currently, I do not think it is possible, once you have access you have full access.  Although 4.5, I heard that the administration is moving to permission based which should fix this.

• ASA 8.2 (3): can't 'turn on' GANYMEDE ACS4.2 user with the privilege level 10

  I can't activate in ASA with a user privilege level of non - 15 set to 4.2 ACS (Ganymede).

  When I activate in IOS device, it allows and "show the privilege" shows the level 10 as planned. ACS must be configured properly, as it works very well with IOS. The user is not defined with explicit parameters. Group is set to 'max activate level' 15 and 'shell level priv exec' 15. The enable password is set to the internal password ACS PAP. Works fine in the IOS.

  When I activate in ASA, it fails to activate, and ACS journal indicates "Ganymede + activate the insufficient privileges. I suspect that ASA is trying to turn in level 15 explicitly. If I try the command "Activate 10" in ASA, it is said:

  Allowing privilege levels is not allowed when it is configured for

  Authentication of the AAA. Use 'activate' only.

  My config (only with relevant orders):

  AAA authentication telnet console LOCAL mmsacs01

  enable authentication AAA console LOCAL mmsacs01

  AAA authorization command LOCAL mmsacs01

  AAA authorization exec-authentication server

  Thank you!

  Set the Options activate on the grp in

  Max Priv for any customer of AAA

  TO

  Level 15

  This will activate and also limit your options of Shell to 10 and the command set that you created

• VPN for PIX 515 allowing access to a single host

  I have already setup on my PIX 515 a VPN connection, which allows the user to connect to our network via a cisco VPN client to access network resources.

  I want to configure now is an another VPN connection that external users can use but would only allow access to a host.

  E.g. I would like to VPN in my site but would be allowed to access the 10.1.1.1 on my network.

  How can I do this? What I have to install VPNGROUP another and somehow an access list to allow only traffic to a host of configuration. Can anyone help with the correct syntax for the PIX.

  Thank you

  Scott

  You will now have a bunch of commands "vpngroup" in your PIX, simply go into config mode and add more commands 'vpngroup' but with a different groupname. The VPN client then uses this group name to connect to the PIX.

  Another way to allow only access to a host for this PIX is to split tunnelling on this group, as well as in the tunnel of split ACL set only as a host.

• Access privilege to show command run in privilege level 3 user

  I have a Dell 6248 switch. I created some users with privilege level 3. Now, I want to give users permission to the "show run" command.

  Can anyone help me how can we provide access to "'show run ' order to these users?"

  Kind regards
  Mukesh Kumar
  Network engineer
  Spooster COMPUTER services

  The PowerConnect OS doesn't have the function to specify a privilege level and assign what allows to have access to this level. The privilege levels are pre set on 0 1 read access and full access 15 block.

• Configure the read-access via user-defined privilege level

  Hello everyone,

  I m looking for the best configuration to restrict a user read-only. The restriction must be configured through CLI not GANYMEDE.

  Material: 3750 (probably not interesting for that matter)

  More old IOS: 12.2 (53) SE1

  The user should be allowed to:

  • See the running configuration
  • trigger all sorts of orders-show
  • Ping and traceroute of the device

  The user should not be allowed to:

  • Download/delete/rename files on the flash memory
  • Enter the level 15 (not sure if I can avoid it)
  • all orders despite those level 1 and those specified above

  Can someone help me with this?

  Thanks in advance!

  I have won´t forgotten messages useful rates

  Hi Tobias,.

  You can

  set up multiple levels of privilege on a switch as explained below.

  By default, the Cisco IOS Software has two modes of password security: user EXEC and

  Privileged EXEC. You can configure up to 16 levels of commands for each mode.

  By configuring multiple passwords, you can allow different sets of users to have access to

  specified commands.

  For example, if you want many users to have access to the clear line command, you can

  He attributed a level 2 security and distribute the level 2 password fairly widely. But if you

  want more restricted access to the command configure, you can assign security to level 3

  and distribute the password to a more restricted group of users.

  Definition of the level of privilege for a command

  Beginning in privileged EXEC mode, follow these steps to set the privilege level for a

  control mode:

  Purpose of command

  Step 1

  Configure the terminal

  Enter global configuration mode.

  Step 2

  level privilege mode level control

  Set the level of privilege for a command.

  For mode, enter set for the global configuration mode, exec to EXEC mode, interface

  for the interface configuration mode, or the line for line configuration mode.

  For level, the range is from 0 to 15. Level 1 is normal user EXEC mode privileges.

  Level 15 is the level of access allowed by the enable password.

  For command, enter the command that you want to restrict access.

  Step 3

  activate the password level

  Specify the password to enable for the privilege level.

  . For level, the range is from 0 to 15. Level 1 is normal user EXEC mode privileges.

  Password, specify a string from 1 to 25 alphanumeric characters. The string cannot

  start with a number, is case sensitive and allows spaces but ignores leading spaces. By

  by default, no password is defined.

  Step 4

  end

  Return to privileged mode.

  Step 5

  Show running-config

  or

  Show privilege

  Check your entries.

  The first command shows the level of the password configuration and access. The second command

  Displays the privilege level configuration.

  Step 6

  copy running-config startup-config

  (Optional) Save your entries in the configuration file.

  When you set a command to a privilege level, all commands whose syntax is a subset of this

  control can also be programmed at this level. For example, if you set the show ip traffic command

  level 15 show commands and show ip commands are automatically set to privilege level

  15 unless you set them individually at different levels.

  To return to the privilege by default for a given command, use the no privilege mode level

  control of level global configuration command.

  This example shows how to set the command configures to focus on level 14 and set

  SecretPswd14 as the password users must enter to use 14 level controls:

  Switch (config) # level 14 exec privileges set up

  Switch (config) # enable password 14 SecretPswd14 level

  You can also change the default privilege for every user level.

  Change the level of privilege by default for lines beginning in privileged EXEC mode follow these steps to change the default privilege for a line level: complete order

  Step 1 Configure terminal enter global configuration mode.

  Step 2 line vty select the virtual terminal line to restrict access.

  Step 3 privilege level change the default privilege for the line level.

  For level, the range is from 0 to 15. Level 1 is normal user EXEC mode

  privileges. Level 15 is the level of access allowed by the enable password.

  End of step 4 back in privileged mode.

  Step 5 show running-config or show privilege

  Check your entries. The first command shows the level of the password configuration and access.

  The second command shows the privilege level configuration.

  Step 6 copy running-config startup-config (optional) save your entries in the configuration file.

  Users can replace the privilege level that you set by using the privilege level line configuration command

  you connect to the line and enabling a different privilege level.

  They can lower the privilege level by using the disable command.

  If users know the password to a higher privilege level, they can use this password to enable the higher privilege level. You can specify a privilege for your console line level to restrict the use of the line or high-level.

  To restore the default line privilege level, use the no privilege level line configuration command. Also I send you a document for your reference.

  http://www.Cisco.com/univercd/CC/TD/doc/product/LAN/cat3750/12225see/SCG/swauthen.htm #wp1154063

  HTH

  Concerning

  Reem

• How will I know that a privilege level is allowed to do

  We had an engineer that installing a privilege level personalized some time. As far as I know, it's still there. How can I make sure that this specific level is allowed to make? How to add or remove things from it?

  The configuration currently has a set of names of local users and devices is configured to use these user names the and their configured privilege level (currently "15" = full administrator privileges) for authentication and authorization by the following lines:

  username disaster privilege 15 secret 5 username svc-kiwi privilege 15 secret 5 username admjkude privilege 15 secret 5 username admprime privilege 15 secret 5 username svc-prime privilege 15 secret 5 username admpsing privilege 15 secret 5 username admkgen privilege 15 secret 5 username admtmcco privilege 15 secret 5 aaa new-model!!aaa authentication login default local line enableaaa authorization consoleaaa authorization exec default local 

  If new users have been defined with a lower privilege level (say '3' or '4'), they would be limited to the commands that appear in the next section of the config file:

  privilege interface level 3 duplexprivilege interface level 3 speedprivilege interface level 4 power inline neverprivilege interface level 4 power inline staticprivilege interface level 4 power inline autoprivilege interface level 4 power inline consumptionprivilege interface level 4 power inlineprivilege interface level 4 powerprivilege interface level 3 shutdownprivilege interface level 4 ip addressprivilege interface level 4 ipprivilege interface level 3 switchportprivilege interface level 3 descriptionprivilege configure level 3 interfaceprivilege configure level 4 ip domain-nameprivilege configure level 4 ipprivilege configure level 4 clock summer-timeprivilege configure level 4 clock timezoneprivilege configure level 4 clockprivilege configure level 4 hostnameprivilege exec level 4 copy running-config startup-configprivilege exec level 4 copy running-configprivilege exec level 4 copyprivilege exec level 4 cryptoprivilege exec level 4 tclquitprivilege exec level 4 connectprivilege exec level 4 telnetprivilege exec level 4 mtraceprivilege exec level 4 mstatprivilege exec level 4 mrinfoprivilege exec level 4 tunnelprivilege exec level 4 access-enableprivilege exec level 4 powerprivilege exec level 4 enableprivilege exec level 15 disableprivilege exec level 3 configure terminalprivilege exec level 3 configureprivilege exec level 4 resumeprivilege exec level 4 name-connectionprivilege exec level 4 disconnectprivilege exec level 4 reloadprivilege exec level 4 terminalprivilege exec level 3 show startup-configprivilege exec level 3 show running-configprivilege exec level 4 show interfacesprivilege exec level 4 showprivilege exec level 4 setprivilege exec level 4 lockprivilege exec level 4 logoutprivilege exec level 3 clear countersprivilege exec level 4 clear

• I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO installation b

  I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO button install. How to do it?

  Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

  - and if you have Cloud application manager 2015 https://forums.adobe.com/thread/1906752 of difference

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number

  -a of notes on different versions of cloud and step by step on these differences

  -contains information about the separate library download which is necessary

• I lost create new folder capability, windows in Windows 7 Explorer now only allows to create "new briefcases" folder instead. How to return to the good old file folder create capabilities?

  I lost create new folder capability, windows Explorer.  Windows 7 now only allows to create "new briefcases" folder instead.  I'm not sure any upgrade of MS that caused this change. I would like the pros and cons of the 'Briefcase' records and also

  How to restore or use for good old file folder create capabilities?

  See if this thread will help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/unable-to-create-a-new-folder-in-Windows-7/3c5951c8-e3b0-4E5B-99A5-744f842fe558

• I buy 6 Lightroom from Amazon, received the album, but could not find a SN which will allow me to start the installation.  This sleeve is not, the FN is too short, the other number on the box is only 18 digits.  Help

  I buy 6 Lightroom from Amazon, received the album, but could not find a SN which will allow me to start the installation.  This sleeve is not, the FN is too short, the other number on the box is only 18 digits.  Help

  You posted in the wrong forum, this is the forum of Captivate. Can I move this question to the Lightroom forum?

• The user can see all the resources, not only allowed for access to its organization

  Hello
  
  I put three self-serviceable resources resources authorized for a specific organization. So if I click on resources authorized for this organization, I can see only these three...
  
  When a user of this organization click on request for new resources, all self-serviceable resources are listed to the user, not only allowed resources. I thought that the user can only see authorized resources...
  
  If I connect as sys admin and request resources for a user of that organization, I can see that the three resources allowed.
  
  I saw the sql statement that run of IOM to inventory resources:
  
  Select
  obj.obj_key, obj_name, obj.sdk_key, sdk_name, obj_order_for, obj_auto_prepop, obj_type,
  obj_allow_multiple, obj_self_request_allowed, obj_autosave, obj_allowall,
  obj_rowver, obj_note, obj_autolaunch
  to obj obj
  outer join Software Development Kit sdk left obj.sdk_key = sdk.sdk_key
  where obj.obj_key in
  (
  Select distinct obj.obj_key from obj obj
  outer join Software Development Kit sdk left obj.sdk_key = sdk.sdk_key
  Left outer join acp acp on obj.obj_key = acp.obj_key
  OBA oba on obj.obj_key = oba.obj_key left outer join
  where
  (
  obj.obj_self_request_allowed = '1' or obj.obj_key in
  (
  Select obj_key in acp where act_key in
  (
  Select act_key
  of the usr
  where usr_key = 5 and acp_self_servicable = '1'
  )
  )
  ) and
  obj.obj_order_for = 'U' and
  (obj.obj_type ='Application ' or obj.obj_type ='Generic ') and
  obj.obj_key not in
  (
  Select pop.obj_key
  pop pop, pol pol, pog pog, PMU PMU, usg usg
  where
  pop.pol_key = pol.pol_key and
  pol.pol_key = POG.pol_key and
  POG.ugp_key = UGP.ugp_key and
  UGP.ugp_key = USG.ugp_key and
  USG.usr_key (5) and
  pop.pop_denial = '1'
  ) and
  obj.obj_key not in)
  Select distinct obj.obj_key
  to obj obj, obi obi, ost ost ouedraogo ouedraogo
  Join external orc orc left on oiu.orc_key = orc.orc_key
  where
  OIU.obi_key = Obi.obi_key and
  OIU.ost_key = OST.ost_key and
  Upper (OST.ost_status) "REVOKED" <>and
  OBI.obj_key = obj.obj_key and
  OIU.usr_key (5) and
  obj.obj_allow_multiple = '0'
  ) and
  obj.obj_key in
  (
  Select distinct obj_key
  pkg
  where pkg_type = 'Configuration '.
  )
  )
  
  As you can see in the query above, if I change the excerpt below the result is what I expect.
  
  ...
  obj.obj_self_request_allowed = '1' AND obj.obj_key in
  ...
  
  I missed to set something or something wrong?
  
  Thank you
  
  Renato.

  Sorry, but I do not understand your last answer. You mentioned the following:

  for option B, even if option A is not checked, you can set automatic ask for organization when assign authorized resources.

  -isn't that what you wanted? You define the resource resources as authorized in all organizations whose users can request this resource. I implemented this and it works fine. This works for both types of applications. (a) my resources-> request for new resources and b) applications-> resources-> Grant resources.

  In the case of b, according to the Organization to which the user is selected, the resource is displayed. all resources are not displayed.

  So the solution is to uncheck in RO and bring the resource authorized specific organizations as resources in self down. It should work fine. Let me know your exact problem if it works that way.

• Only read access to UGM

  Hello
  By looking at the documentation, it is not possible to create read-only access in the UGM. The use case would be to have a member of the team support desk to be able to check the status of a user account and also check the role and group membership. The permissions described in the documentation seems to suggest that with the level of permissions that allow access to the MFU, users woud still be able to create requests for change, which is not necessarily desirable.
  
  Thank you
  Drew

  If you don't add all the roles, but give the user access UGM (user-> access-> site-> MFU access), then they will be able to view, but not edit or export users/groups.

  also, if you use an environmental strategy of export/import, import environment should not allow editing, regardless of the permissions granted.

  M