Create a rule to choose the percentage-based WMS

Similar Questions

• Need help to create a rule to monitor the "DSDeviceTotalLatency" under "VMWDatastore".

  Hello all, I am very new to vFoglight and tasked to create a rule to control the property 'DSDeviceTotalLatency' of type 'VMWDatastore' topology.  Looking at existing rules, I see that I need to write a mini script on the tab 'Conditions and Actions '.  The problem is that I do not know how to reference this property and the command to use to recover.  Thank you in advance.

  At, it is simple, can be as simple as:

  scope of the rule to the VMWDatastore type on the tab 1

  condition on tab 2:

  If (#totalLatency # 10 >) {return true;}

  return false

• Can we create a rule to capture the URL string in the Hits in the APM cartridge.

  Hi team,

  We have an obligation to create a rule/alarm alert when there is string "File not found" are there in the 'LINK' when we capture the Hits. Please let me know is possible to create this kind of rule in Foglight.

  Thank you

  Shashank Soni.

  To follow on what David said, you can find this useful guide:

  Configuration of the analyzers of success

  Hope this helps,

  Shay

• Choose the value based on the parameter range

  Hi all
  
  Thanks in advance
  
  I have a table tableaa
  
  what I need to do
  
  (1) if the parameter according to table below is 1 then I need to choose
  only every 3 ranks
  
  AN AVERAGE OF END TEACHER BEG
  ---------- ---------- ---------- ---------- ----------
  3 0.2 0.3 159 159
  6 0.3 0.4 250 250
  9 0.4 0.5 388 388
  
  
  (2) if the parameter according to table below is 2 so I need to choose
  only every 6 row table
  
  AN AVERAGE OF END TEACHER BEG
  ---------- ---------- ---------- ---------- ----------
  6 0.3 0.4 250 250
  
  
  create table tableaa (a number, beg, number, end, teacher number, average number);
  
  insert into TABLEAA (A, START, END, TEACHER, AVERAGE)
  values (1, 0,.1, 159, 159);
  insert into TABLEAA (A, START, END, TEACHER, AVERAGE)
  values (2,.1,.2,, 159, 159);
  insert into TABLEAA (A, START, END, TEACHER, AVERAGE)
  values (3,.2,.3,, 159, 159);
  insert into TABLEAA (A, START, END, TEACHER, AVERAGE)
  values (4,.1,.2, 250, 250);
  insert into TABLEAA (A, START, END, TEACHER, AVERAGE)
  values (5,.2,.3, 250, 250);
  insert into TABLEAA (A, START, END, TEACHER, AVERAGE)
  values (6,.3,.4, 250, 250);
  insert into TABLEAA (A, START, END, TEACHER, AVERAGE)
  values (7,.2,.3, 388, 388);
  insert into TABLEAA (A, START, END, TEACHER, AVERAGE)
  values (8,.3,.4, 388, 388);
  insert into TABLEAA (A, START, END, TEACHER, AVERAGE)
  values (9,.4,.5, 388, 388);
  commit;

  This query, you can get what you need:

  SELECT  *
  FROM    TABLEAA
  WHERE   DECODE
          (
                  :parameter
          ,       1
          ,       MOD(A,3)
          ,       MOD(A,6)
          ) = 0
  

  The sample output:

  SQL > exec :parameter := 1;
  
  PL/SQL procedure successfully completed.
  
  SQL > SELECT  *
    2  FROM    TABLEAA
    3  WHERE   DECODE
    4          (
    5                  :parameter
    6          ,       1
    7          ,       MOD(A,3)
    8          ,       MOD(A,6)
    9          ) = 0
   10  /
  
           A        BEG        END       PROF    AVERAGE
  ---------- ---------- ---------- ---------- ----------
           3         .2         .3        159        159
           6         .3         .4        250        250
           9         .4         .5        388        388
  
  SQL > exec :parameter := 2;
  
  PL/SQL procedure successfully completed.
  
  SQL > SELECT  *
    2  FROM    TABLEAA
    3  WHERE   DECODE
    4          (
    5                  :parameter
    6          ,       1
    7          ,       MOD(A,3)
    8          ,       MOD(A,6)
    9          ) = 0
   10  /
  
           A        BEG        END       PROF    AVERAGE
  ---------- ---------- ---------- ---------- ----------
           6         .3         .4        250        250
  

• ViewStack container. Choose the view based on the variable command.

  Hi I am trying to implement in my application role-based access control.  I opted for a login screen which will compare users and passwords to a MySQL database.  on a match, I need to read the 'role' associated with each user.  I want to have different views for each Admin role with the role, that role will see views admin and users, a user discovers and so on.

  I managed with a button to change the view.selectedChild.  How can I use view.selectedChild = $var.

  As a test I used a dataGrid to give me choices.  But when I use the selectionChange like this event handler

  protected function dataGrid_selectionChangeHandler(event:GridSelectionEvent):void
                                {
                                          view.selectedChild = dataGrid.selectedItem.role;
                                }
  

  It does not change the view.

  Is it possible to use ViewStack for control of access in this way?

  SelectedChild is a point of view.  What is the role?  What is an int or a string?  I would like to map it to selectedIndex instead.

  But really, I wouldn't use ViewStack and use view States that match name role.

• Calculate the percentage based on the other 2 columns column

  I did 2 columns. These two columns are column_a = separate count of all documents and
  column_b = separate count of the subset of records based on the specific condition.
  I try to get column_3 = (column_b/column_a) * 100
  These 2 columns comes from the same physical tables but two different logical tables (I have the condition where the different for each)
  Result is correct (100) where column_a = column_b, but I get 0 when they are different
  col_a, col_b %
  8 7 0 why not 87.5
  1 1 100
  27 23 0 why not 85.2

  NP, any chance of some reputation points if this has been helpful?
  Thank you

• Apex, language of login page set after the connection based on the user pref browser lang and application-based

  Hello

  Request Express 4.2.3.00.08

  I created an application of multi languaguage in which the language is defined by setting: FSP_LANGUAGE_PREFERENCE

  But the login page, I would like to than the login page to be displayed in the browsers language.

  The url of the application connection looks like as shown below but the & BROWSER_LANGUAGE. product always (English).

  f? p = & APP_ID.:LOGIN_DESKTOP: & SESSION. : FSP_LANGUAGE_PREFERENCE: & BROWSER_LANGUAGE.

  
  

  LOGIN_DESKTOP is an intermediate page that has one before branch header for the page of real connection if the FSP_LANGUAGE_PREFERENCE is set prior to the loading of the page.
  

  If I set the language set in this URL, it works as expected:

  f? p = & APP_ID.:LOGIN_DESKTOP: & SESSION. : FSP_LANGUAGE_PREFERENCE:nl - page Login Show in NL

  f? p = & APP_ID.:LOGIN_DESKTOP: & SESSION. : FSP_LANGUAGE_PREFERENCE:-see the login page in EN

  When I put the application to choose the language based on the browser language that it works, but then I am not able to have users to save their preferences for the next time they are connected.

  Any ideas on why & BROWSER_LANGUAGE. translates by "in" even though the language in the browser is different?

  See you soon

  Bottom

  OK, he stares at me

  For all those interested, this is how.

  Create a page additional empy (with alias page LOGIN_FORWARD_PAGE) and set the url to connect to the application of this new page and set the value of the application on BRANCH_TO_PAGE_ACCEPT:

  f? p = & APP_ID.: LOGIN_FORWARD_PAGE: & SESSION. : BRANCH_TO_PAGE_ACCEPT:

  On the page to create a pl/sql process submit before calculations similar to one below which affect the en language, if the browser is not NL (in Dutch):

  If upper (substr (owa_util.get_cgi_env ('HTTP_ACCEPT_LANGUAGE'), 1, 2)) = "NL" then

  : FSP_LANGUAGE_PREFERENCE: = "nl";

  on the other

  : FSP_LANGUAGE_PREFERENCE: = 'en ';

  end if;

  And create a branch to submit before the treatment which redirects to the current login page (the value of FSP_LANGUAGE_PREFERENCE is then already set and the application is configured to use this setting).

  After that loging in you can extract the FSP_LANGUAGE_PREFERENCE based on the user.

  BTW, I had to switch to 4.2.5 there in 4.2.3 is a bug preventing to set session state when you use BRANCH_TO_PAGE_ACCEPT!

• How can I create CSS for the editable regions in the documents based on templates?

  I created a template in Dreamweaver CS4 by using their set of 3 columns, header and Footer option available. The model works fine in the browser. I inserted an editable region in the empty middle of the model column. I created a new page based on this template and want to be able to format the text that I entered in the editable using CSS. Any time, I try to create a new CSS rule I get the following dialog:

  "This change should change the code which is locked by a model or a translator. The changes will be rejected. »

  Is it possible to create new CSS, which will apply to the information entered in the regions be modified of a document based on a template? Simple step by step instructions would be appreciated.

  Thanks for reading

  Do not know what is the 'id' of the middle column, but you must target the text inside that

  .

  Example:

  {#whatever}

  color: #639;

  do-size: 12px;

  }

  It is better if the text in the middle column is paragraphs and target you them as as follows:

  #whatever p {}

  color: #639;

  do-size: 12px;

  padding: 0 15px 15px 0 / * top, bottom, right, left * /.

  }

  You must make sure that you include the above in the editable page css region and HE MUST come after any link to the style sheet css main.

  If in doubt post the code for the page here and say what you want to be purple and I'll have a look.

  The tip is stop created with the css dialog box in DW, it's a load of bollocks and started writing some simple css directly in the page itself. It is easier and gives you more control than any interface automated half cooked in the oven.

  Start learning some simple css. There is absolutey zillions of resources on the net. A couple of hours well spent and your miles further. If you keep pressing DW to do everything for you, then I'm afraid you'll just be going around in circles.

  Enter the code and don't be afraid of him, take it apart and see how it works. Slowly step by step and little by little you will realize how simple structures are and how simple css really is.

• How to create a rule of action to subtract from the Ips event log manager console express?

  How to create a rule of action to subtract from the Ips event log manager express console?, some unknown has a guide?

  Thank you.

  Sent by Cisco Support technique iPad App

  Hello

  http://www.Cisco.com/en/us/products/sw/secursw/ps2113/products_tech_note09186a0080bc7910.shtml

  HTH

  Luis Silva

  "If you need IDP (planning, design, implementation) assistance do not hesitate to contact us.

  http://www.Cisco.com/Web/partners/tools/pdihd.html

• Forms - calculation of percentages are based on the percentages of parent in a tree structure

  Hello

  We have a scenario where we build a tree using a standard package available in oracle forms when new block and fill a tree structure of multi Instance.

  The block is based on a single table.

  The tree is is filled. The problem is with the percentage calculations. As the percentage of the child dependent parent

  PERCENTAGE of PARENT- CHILD LEVEL

  1                101                       0                                 45

  1                102                      0                                  35

  1                103                      0                                   30

  2 201 101 PERCENTAGE OF PARENTS 101

  2 202 101 PERCENTAGE OF PARENTS 101

  2 203 102 PERCENTAGE OF PARENTS 102

  2 204 102 PERCENTAGE OF PARENTS 102

  3 301 201 PERCENTAGE OF PARENTS 201

  You can get the percentages to level 2, level 3.

  I was wondering how this can be done in oracle forms... for example... .to child 201, is the percentage of the 101 level... but level 101 is also filled in the buffer of the block as well as all Level1s...

  All entries are appreciated.

  Thanks and greetings

  S

  The solution me. Idea is to use the 'Post' at the time be called in a loop. Then POST will write in the validation of the database but strict.

  The idea is that at the time of execution, we would be able to select "Not ENGAGED" current session data in the database and use it more for treatment.

  Concerning

  S

• I exported my Premium Pro movie to a .m2v file.  When I try to open a new project so that I can create a DVD file and I can choose the .m2v file, it is grayed out.  Also, if I double click on the .m2v file, it will open s toward the top, but w

  I exported my Premium Pro movie to a .m2v file. When I try to open a new project so that I can create a DVD file and I can choose the .m2v file, it is grayed out. Also, if I double click on the .m2v file, it opens, but will not play and seems to be locked or frozen. What can I do?

  Again, you use "import as" assets or timeline?

• How to choose the item value list based on another value of list item

  Hello friends,
  I have two list items named xxx and yyy... OK, my problem is I want to choose a value of yyy list item based on the value of article xxx...
  
  Example: I select 'Computer' in xxx... Based on this I want to choose the item values in yyy as a monitor, keyboard, mouse, etc... This must be done at run time. How can I do this... Give me a few examples of code [pls tell me trigger appropriate to place this encodings]
  Thanks in advance,
  Battistelli

  Very simple to use the LOV and query of the lov which is attached to the YYY field, use the query as below...

  SELECT columns
  FROM table
  WHERE column_name = :XXX_FIELD
  

  Use the ENTER OF LIST Yes property for the YYY field.

  -Clément

• Creating a rule entry time custom to read the start time and the stop as entry time

  Hello world
  
  I hope this is the right forum to post this question.
  We are putting in place the time and work package, and we need to write a few rules of the time for this entry.
  
  The first of them is to have a rule that validates the start time and the stop time has entered the entry-level feature Self Service scorecard.
  So, I created a formula to achieve this objective. This formula eventually calls a PL/SQL function that checks for card points, the Start and Stop time values stored in the database.
  
  However, this is not what I intend to achieve. What I have to do is to get the value of time as she walked and apply the Validation
  
  This expansion in a scenario:
  
  1. the employee connects via the Self Service and access the timesheet feature to make a time entry
  2. on August 20, he entered 13:00 as the start time and stop time 20:00
  3. click on the button
  
  When he clicks on the button Save, (assume 20:00 is an incorrect time), an error message should be displayed to the user informing him of this
  
  ----------------
  Now, I have to spend the early hour 13:00 and the 20:00 in the formula stop time so that I can post it.
  This is where I run on issues that I don't know how to get these start and stop within the formula time
  
  Grateful if someone could help with this.
  It's quite urgent given the lead times for completion on that.
  
  Thks in advance folks
  Ravi

  l_timecard_info: = hxc_self_service_time_deposit.get_building_blocks;
  l_building_block_attr_info: = hxc_self_service_time_deposit.get_block_attributes;

  However, I do not understand this:
  If there are no parameters that are passed to these calls, then how the correct score card to be recognizable? I'm assuming that there is something like a Timecard_Id or setting Timecard_Ovn that allows to identify the correct sheet when reading this info.

  Pls advise me on this point, because I'm just not understand this bit.

  You do not need to pass all parameters. The overall picture of pl/sql is filled for the session before the rule of time entry. If you want to restrict, the formula will be an id_ressource of entry which is an employee self-service Person_Id. and compare this value against id_ressource in l_timecard_info.resource_id

  If this isn't an inconvenience for you, I want to understand how these function calls to keep the start time and stop time, and to access these variables, I would need to loop as a table through?

  The l_time_card_info of pl/sql table is filled exactly the same as how is stored in HXC_TIME_BUILDING_BLOCKS when save is saved / submitted. It's just that the pl/sql is here filled.

• Spotting: way always create and choose the sample to 1 step area?

  Hi all

  I was wondering if there is some kind of shortcut for this...

  I LOVE the fact that we now have the ability to create a non circular shape with the removal of Spot (Q) tool.  But one of my favorite things to this subject (LR4 & previous) was previously you can click-and - drag to create a spot & drag on the picking area you wanted in a SINGLE step.  Now, of course, if you click-and - drag you get a non circular shape.  So if you want just a circular spot, you need to click... wait to select an area of picking on his own... and then either (a) slide that enjoy the area where you want to that it, or (b) hit "/" change of the conjectures of area sample until he grabs one you like.

  .... I wonder if there is not, as a keyboard shortcut or a chosen key, which allows you to click - drag a task from circle to get the sample you want in one step, as we could before...?

  Thank you!!

  Command (control) - click allows you to do now. Cmd-click on place and drag it on the picking area.

• [SOLVED] Create ViewObject as placeholder for the parameters of the form

  Hello
  
  I posted the following question (JDeveloper 11.1.2.3):
  
  http://StackOverflow.com/questions/14592202/create-ViewObject-as-placeholder-for-form-parameters
  
  Basically, how do you create a ViewObject that can perform validation and harness LOVs, but don't don't don't need to be supported by any source of data?
  
  Is it still the right approach?
  
  Thank you!

  Hey, Timo.

  This can be accomplished without an OA. As far as I can tell, it's the right answer, but this forum does not allow me to choose my own answer as correct, but somehow allows me to report my own post as an abuse. Strange.

  Find the property formatted (and selected as correct) answer on StackOverflow: http://stackoverflow.com/a/14611815/59087

  # Solution

  You have:

  -Create a view object to be programmatic, with the desired attributes.
  -Configure the view with validation rules object.
  -Configure the Module of the Application.
  -Create the form on the web page.
  -Update the page link to create a new line.

  # Create object View

  Create the view as follows:

  1. type Control+n to open the * New Gallery *.
  1. search and select * view object *.
  1. click on * OK *.
  1 set * Package *, * name *, and * display name * properly.
  1 set * data * to * programme *.
  1. click on * following *.
  1. click on * new * and provide a significant attribute name.
  1. click on * OK *.
  1. Add the remaining attributes.
  1. click on * following *.
  1 set * Updatable * to * always * all attributes.
  1 set * Type * for the appropriate data type.
  1. click on * finish *.

  # Configure Validation rules

  Configure the following validation rules:

  1. click on the * attributes * tab.
  1. Select the desired attribute.
  1. click on the * tab Validation rules *.
  1. click on the * + * icon in the * section Validation rules *.
  1 set it * rule definition * as required.
  1. set * error * as required.
  1 Repeat to add validation as necessary rules.

  At this point a view object has been configured and the * list tab of values * can be used to reference LOVs based on a query.

  # Configuration Application Module

  Configure the module of the application as follows:

  1 double-click on the module of the app.
  1. Select * model data * tab.
  1 Shuttle the object view of * available see items * to * model data *.
  1. remove the * 1 * suffix.
  1. save the application.

  Note: If the view object is not visible, restart JDeveloper.

  # Create Web Form Page

  Create a web page to the form as follows:

  1. create a new JSF of the object view page.
  1 update the * data controls * see the instance of the view object.
  1. drag and drop the view on the page object.
  "1. Select * form" ADF form *.
  1 check * include submit button *.
  1. click on * OK *.

  The web page is created.

  # Update the Page link

  Cannot change the attributes of the view object unless there is a 'line' created for the instance of the view object. Creation of this line in memory must occur before the display of the content on the page. Accomplish this as follows:

  1 extend the data controls to reveal the view object * operations *.
  1 drag * Create * in the facet of footer.
  1. Select * ADF button *.
  1. right-click on the page.
  1. Select * go to Page definition *.
  1. click on * + * next * executable *.
  1. Select * invokeAction *.
  1. click on * OK *.
  1. set * id * to: create
  1. set * lie * for: create
  1. click on OK.
  1. the refresh value: * prepareModel *.
  1. save all.

  You can now remove the create"" button.

  The validation is applied, and data-driven LOVs can be used.

  Published by: Dave.Jarvis on January 30, 2013 11:15