Create a Simple VM without the list of resources

Similar Questions

• How long does it take for the custom field created in SFDC appears in the list of field mapping?

  How long does it take for the custom field created in SFDC appears in the list of field mapping? I hit the refresh field button, but it does not appear after 5 min. I just need to have patience?

  I had the same problem yesterday, I think it took about 10-15 minutes to appear.

• Creating simple shapes without the wizard

  Hi all.

  I've been hitting my head against the proverbial wall for days trying to find a way to do something that is probably very simple.

  First of all, my features. I work in Acrobat X on a Windows 7 PC. My forms were created in InDesign CS5.5.

  I'm working on the creation of a couple of forms for our sales team to deliver to our customers. We would like to see the forms digitally to fill, recordable and printable for users with reader. I know it's all doable with extended rights. No biggie.

  My problem is I want to use the submission tools automatically integrated in the Acrobat forms Wizard. I'm not at all a "submit" button. Our workflow desired is that our customers complete the form and then either print sign and deliver via mail or by fax (a form requires a signature, and our customers aren't saavy enough to use digital signatures) or for forms that do not require signatures, fill, save, and email back to us manually. All is well with the form design process, except that as soon as I use the forms tools in Acrobat to fine-tune my form, it adds functionality to submit the form to my PDF (the dreaded purple bar). I don't even have to distribute the form for this purpose. It seems to be applied as soon as I use all forms of editing tools.

  So my question is how can I change my form so that it is functional without the button submit the form applied? I did several searches on these forums and related issues found, but have not found a solution that will help me here. I have LC and am ready to dive in there, if that's what is required, but it would take a bit of research on my part because I've never used.

  Any thoughts would be appreciated.

  Michelle

  I see what you're saying. Note the Send button in the document message bar purple forms should appear for a form not distributed when you image previewed in form editing mode. It will appear not for users who fill out your form, or when you exit the form editing mode.

• Impossible to deploy Org VDC. Can not find the list of resources

  
  I am trying to deploy a new network of vdc org but get the error "Failed to find a list of resources for the implementation of edge gateway"

  I can see the dvswitch is created in VC Client but then he removes immediately set and gives the error.

  I deleted once today the vcd and started from scratch but still making the same mistakes?

  Someone had this or know where to look?

  See you soon

  Solution has been found.

  I found the problem in the log for debugging on the servers of the cell. You can see try storage and do not.

  For those of you who also see this question, then please check the following recommended by vmware supports known issues.

  Make sure that your storage space has been configured correctly and that you have profiles of storage associated with it.

  You will also need to show your thresholds for storage as it is also a question to know the cause.

  For me, I had to create a new storage cluster and move this cluster of each data store.

  Then refresh the profiles of storage within the VC of VCD element and also to update the connection of VC in VCD.

  Then restart the Service of VC on the VC Server

  Restart the vShield Manager and then wait 5 minutes for the vShield Manager to resynchronize itself and return to normal.

  Now, try again and I hope that you will be successful

• Manage the list of resources by commands?

  The VMware ESX 4.1.0 and vCLI are cool. But can I create and manage the Pool of resources by commands?

  Thank you.

  Depends on your needs, if you are wanting to use the vCLI (remote CLI) commands, VMware has not all scripts in canned food that takes care of the management or the creation of Resource Pools, you must write your own. Here is an example on creating a Pool of resources in a specific Cluster VMware - http://communities.vmware.com/docs/DOC-11448

  If you plan to run the commands on the host ESX (i) himself, then you can take a look at vimsh - you can look in usingn vim - cmd hostsvc/rsrc but, once again, this one deals with RP local within the host ESX (i), if you talk about RPs vCenter, you will need to look at the first option.

  If you are looking to manage/create the RPs, you can also take a look at PowerCLI, there are a bunch of canned cmdlets that offer this feature and should be pretty simple to start, the requirement is Windows + PowerCLI

  So just all depends on what/where you try to do

• How can I create a simple VM using the EFI firmware?

  I created a VM with OS 'Another 64 - bit' and edited the .vmx file, change only the "bios" = firmware firmware = "efi".

  Whenever I start the virtual machine, it uses the BIOS instead of the EFI. I can see when to start directly to the firmware, or by starting with a 8.1 Windows Installer disk and installing Windows checking connects immediately after that it started ("" detected boot environment: legacy ' ").

  How create/configure a virtual machine to use systematically the EFI, without her 'crush' or 'back' to my configuration?

  I use VMware Fusion 7.1.0 (2314774).

  Hi michielvoo

  Welcome to the VMware communities forum.

  I wrote an article on the use of EFI in a machine virtual here: Boot via the EFI firmware | PlanetVM

  Basically, what you're doing are correct. The part, I wonder about is if the double quote characters you use double quotes a normal and not the "fantasies" (as you can see in the above article, these are those fancy)

  It takes standard double quotes on your keyboard.

  Another possible reason to make it work is not is if you edit the vmx while your merger still works as he could return your changes to protect the virtual machine.

  If you don't know everything that's wrong with your vmx file, then send the vmware.log file is also in this folder to an answer here and I or someone else will take a look and see if everything's okay what is wrong.

  --

  Wil

• How to create a simple so that the else statement

  I tried for hours to find out how a simple calculation to display text in a field that is based on what is selected in another drop-down list.  My first time doing so, I'm not sure what I'm doing wrong.  Here's what I have so far:

  get the value of the field doctor

  var doctor = this.getField("Physician").value;

  Display according to chosen doctor number

  if(Physician=1) event.value = 100;

  ElseIf (physician = "2") event.value = 200;

  ElseIf (physician = '3') event.value = 300;

  else event.value = 0;

  You have made the classic mistake of using the wrong operator in if statements. The operator if in JS is 'is' (or ' = '). '=' is the assignment operator.

  In addition, in the first statement, you compare the values of a number and later on a string. You must be more coherent.

  Then use this code:

  // get the value of the Physician field
  var Physician = this.getField("Physician").valueAsString;
  
  // Display Number depending on Physician selected
  if (Physician=="1") event.value = 100;
  else if (Physician == "2") event.value = 200;
  else if (Physician == "3") event.value = 300;
  else event.value = 0;
  

  See your code, however, I don't think that you need an if at all... This code should do the same thing:

  event.value = Number(this.getField("Physician").valueAsString) * 100;
  

• simple script for the list of all data warehouses properties

  I searched a lot of scripts to get information about my data stores. I can quickly export most the properies of that I need right to a csv file vCenter. A flagrant lack room is the 'space Proviosoned' display of list of data store. I look at the properties of each data store to see this information. Y at - it a script that can get this information?  For this script, I don't reallt care about the news at the virtual machine level.

  Until they solve this problem, you can use something like this

  Get-Datastore | where {$_.Type -eq "VMFS"} | Select Name,
         @{N="Status";E={$_.Extensiondata.OverallStatus}},
         @{N="Device";E={$_.Extensiondata.Info.Vmfs.Extent[0].DiskName}},
         @{N="Capacity";E={"{0:f2} GB"-f ($_.CapacityMB /1KB)}},
         @{N="Free";E={"{0:f2} GB"-f ($_.FreeSpaceMB /1KB)}},
         @{N="Provisioned";E={"{0:f2} GB"-f (($_.ExtensionData.Summary.Capacity - $_.ExtensionData.Summary.FreeSpace + $_.ExtensionData.Summary.Uncommitted) /1GB)}},
         @{N="Type";E={$_.Extensiondata.Info.Vmfs.Type.ToLower() + $_.Extensiondata.Info.Vmfs.MajorVersion}},
         @{N="Last Update";E={$_.Extensiondata.Info.Timestamp}}
  

• Error while setting the list of resources

  I get the following error message when attempting to join a resource.
  

  Index (based zero) must be greater than or equal to zero and less than the size of the argument list.

  

  Director of the laboratory of 4.0.1 is not compatible with vCenter 4.1.

  See the matrix for interoperability here:

  http://www.VMware.com/resources/compatibility/SIM/interop_matrix.php

  You should spend at least 4.0.2 to be compatible & supported with vCenter 4.1, or go to 4.0.3 to get the latest version.

  Once you upgrade, let me know if the problem persists.

  Best regards

  Jon Hemming

• Cpu for vm resource stocks are much lower than the virtual machine in the list of resources

  I move a virtual machine from a PR, but I got this warning

  

  I checked and there was no reserve on the virtual machine and the destination THAT RP is set to Unlimited and expandable reservation

  any idea?

  See: VMware KB: the movement of virtual machines between resource pools triggered the warning: percentage of Incorrect CPU

• The list of resources in service of the user having the status of associates

  Hi all
  
  I would need to have a way to get all of the resources, with the related status for a given to IOM by programming user (SQL query or via java MobiLink IOM).
  
  Could you please help me? Is it possible to have this information?
  
  Thank you
  Giuseppe.

  The following query works with 10g. Try to twist the same for 11g. I also check and confirm if it works for 11 GR 2.

  Select distinct oiu.oiu_key, oiu.req_key, oiu.oiu_offlined_date, oiu.oiu_offlined_action,
  OBI.obi_key, obi.obi_status, obj.obj_key, obj.obj_name, orc.orc_key, orc.orc_create, orc.orc_update,
  ORC.orc_status, orc.orc_tos_instance_key, ORC_TASKS_ARCHIVED, ost_status, obj.sdk_key as OBJECTFORMKEY,
  '0' such as OBJECTFORMCOUNT, objsdk.sdk_name as OBJECTFORMNAME, tos.sdk_key as PROCESSFORMKEY, '0' as PROCESSFORMCOUNT,
  procsdk.sdk_name as PROCESSFORMNAME, oiu.oiu_serviceaccount xladm.obj obj outer join left sdk objsdk on obj.sdk_key = objsdk.sdk_key,
  Ouedraogo ouedraogo left outer join orc orc oiu.orc_key = orc.orc_key left outer join tos tos on orc.tos_key = tos.tos_key
  outer join sdk procsdk let tos.sdk_key = procsdk.sdk_key, obi obi, ost ost
  where oiu.obi_key = obi.obi_key and oiu.ost_key = ost.ost_key and obi.obj_key = obj.obj_key and oiu.usr_key =
  (select usr_key from usr where usr_login = ")

• Microsoft Surface Pro does not open in mode full screen without the toolbar on the right projection

  I created an interactive pdf designed for the Microsoft Surface Pro 3, set to open full screen mode. Recently, I think I did something for the preferences settings and now whenever I open the file: (a) I get a warning that it will open in mode full screen (I just want it to open it without the warning); and (b) the toolbar is always right if the presentation is not really in the entire screen. Help, please.

  It's kind of like a dashboard on the right side. The tools that are available are 'tools to fill & sign' (exoanded to: add text, add Checkmark, initial Place, place of Signature). Showing also but not expanded not is 'Send or collect Signatures' and 'Working with certificates.'

  I have been a little more troubleshooting on mine, and now I'm fairly certain that the toolbar appears because the document contains few fields to fill. I removed these items and now the file is opened in mode full screen without the list toolbar.

• On the list of the icons of users

  Hi, can I change the icon of the user host, the icon of the user public... the list? Something like change the png sourcepath.or I have to write a customRoster to change the icon.

  I have read the code of

  Roster.As:

  public static var MENU_HOST_USER_ICON: Class;
  
  [Embed(source="rosterAssets/audienceMenuIcon.png")]

  For the source of icons compiled into the swc and I can not change.

  ideas ~

  Thank you!

  You can change the icons without having to recompile.  The lines below can be added whenever you implement the class list.  Here, I changed the icon that is displayed for the switching of a role of users to the public in the submenu when you role on a user in the list.  Make sure the file is in your current directory

  [Embed(source="/assets/hostRosterIcon.png")]

  var icon: Class;

  Roster.MENU_AUDIENCE_USER_ICON = icon;

  If you want to change the menu icons that are displayed next to the name of users you want to watch by creating your own itemRenderer for the list class.

  -chris

• Passing the list of files to the compiler CAP *.java

  I need to move the list of project files to the EUCPN compiler via the build.files file. It's because I wrote some batch scripts to automate construction projects for different platforms of BB OS. I tried the following script

  "C:\Program Files\Research In Motion\Blackberry JDE 4.6.0\bin\rapc.exe"  -quiet -define=TARGET_BOLD;PREPROCESSOR import="C:\Program Files\Research In Motion\Blackberry JDE 4.6.0\lib\net_rim_api.jar" codename=MyApp MyApp.rapc @MyApp_build.files
  

  but it does not work. Compiler says

  D:\Projects\Current\MyApp\sources\Blackberry>"C:\Program Files\Research In Motion\Blackberry JDE 4.6.0\bin\rapc.exe"  -quiet -define=TARGET_BOLD;PREPROCESSOR import="C:\Program Files\Research In Motion\Blackberry JDE 4.6.0\lib\net_rim_api.jar" codename=MyApp MyApp.rapc @MyApp_build.files
  Warning!: No entry points found
  Warning!: No definition found for exported static routine: .main(String[])
  

  As I understand it, there is a problem with the main application file. But I create MyApp_build.files files using the recursive directory listing and it contains the file .java with public Shared Sub Main definition.

  Compiler generates no file build.files when there are a few files in the project. It creates a long line, where all the file names are listed. I tried to create inMyApp_build.files file in the list by copying-pasting compiler inside line and then split it into lines. After the compiler found the public Shared Sub main, but it loses other files. I can compile the project of the JDE, but I can't compile it from the command line.

  Therefore, it is - how can I generate file build.files make it work? Who controls I need for files of project?

  Thank you, finally I understand your words. The problem is that if you specify destdir attribute of tag, it moves all the resources in the folder root of the .jar file. If you specify destdir as the root of your project JDE (folder, where the file .jdw ) - in other words, when you do not specify this attribute at all - everything is OK, and compiler moves the resources in your project folder structure. So, if you have no problem with the project resources, you should NOT specify the destdir attribute and manually copy the .cod files after compilation.

  Thus, instead of

  You must use

• The list of all workflows pending approval

  Hello

  I use Outlook as a front-end web and I would like to use a workflow to list all workflows pending approval.

  I don't want to use the Web web-operator for this mode because it gives too much access in vCO and ideally would like a list of workflows as well as hostnames for approval (even if this bit is not necessary).

  Can someone point me in the right direction for me start?

  Thank you

  Dave

  HM, that seems to also not be there in Outlook.

  If you want to stay with webviews, you could create additional actions which return the list you need, maybe even full html table.

  But then you need to develop your own webview, which calls the action.

  Another alternative: I think that all of the desired commands are accessible via the SOAP API, so you could create an "external" based on the desired technology web interface (which hopefully is Wavemaker course :-)).) But then you lose the easy submission of entrance for the Webviews :-( So this could only be valuable if you have a certain list of possible workflows and inputs limited in the interactions of the user...

  as a combination, you might try to understand mora on the interactionURL of a workflow token and use that URL in a web interface 'external '. Unfortunately, there are not a lot of docs on this AFAIK.

  Some references:

  The link in my first answer (and the links there) :-)

  http://www.vcoportal.de/category/WebViews/ (all posts here)

  Kind regards

  Joerg