'create an analogue' control by programming of the cyclical report parameter

Similar Questions

• Conc program with the direct report parameter

  I have a report of simultaneous program which takes a person_id as a parameter. Currently, he is executed for the user logged in with a declaration of default SQL query:

  SELECT papf.person_id
    FROM fnd_user fu, 
         hr.per_all_people_f papf,
         hr.per_all_assignments_f paaf
   WHERE fu.user_id = fnd_profile.VALUE ('user_id')
     AND fu.employee_id = paaf.supervisor_id
     AND SYSDATE BETWEEN papf.effective_start_date
                     AND papf.effective_end_date;
  

  Now I have to do is set up a copy of the same program so that a manager can run it. The person_id parameter must be chosen from a list of direct reports to the Manager only, using fnd_user user_id of the prime contractor for the list.

  Need of a query for a supervisors direct reports. Thanks in advance.

  OK, basically what you have to do is reference tables as a list, with aliases for tables - then where clause is put in the ' where / order by ' window. So many fields:

  Table name: fnd_user fu, ADP, women's wear per_all_people_f per_all_assignments_f

  Value: papf.employee_number VARCHAR2 20

  Meaning: papf.full_name VARCHAR2 100

  ID: papf.person_id NUMBER 15

  Where / order by:

  Fu.user_id = fnd_profile. VALUE ('user_id')

  AND fu.employee_id = paaf.supervisor_id

  AND papf.person_id = paaf.person_id

  AND paaf.assignment_type = 'E' - assignment of the employee

  AND trunc (sysdate) BETWEEN paaf.effective_start_date

  AND paaf.effective_end_date

  AND trunc (sysdate) BETWEEN papf.effective_start_date

  AND papf.effective_end_date

  Note that the second query I posted earlier would have failed because I do not understand the per_all_people_f of the table in the table list. This problem has been corrected here.

  In the first screen, the Type of Format it number, because you have specified a column ID that is digital. The concurrent program will pass the ID column, if it is made reference, otherwise, it will send the value column.

  Once again, please keep in mind that I can't try myself to check the absolute rightness of what I posted here, but it should be close enough.

  Hope this helps

  Clive

• How do you create a folder under all programs on the start menu?

  I am on 7 and want to create a folder under all programs on the start menu to contain all my design programs. How can I do this? There is no empty space to click in the menu that appears on right-click and choose new.

  Hello

  @ sharon you can remove your message if you have understood the thread Q

  @cbr_fox

  If you want to create the new folder in the start menu

  Right click on all programs< on="" newly="" opened="">< double="" click="" on="" programs="">< create="" new="">< rename="">< add="" the="" shortcuts="" of="" your="" programs="" to="" created="" folder.="">

  Now you can access the folder in the list of programs.

  Hope it solves your problem.

  Best regards

  Nikhil

  Blog:WindowsWorld

   

• How can I change example full pwm to make dynamic frequency as well as the cyclical report?

  Successfully, I downloaded and compiled 'daqmx_pwm_examples.zip '.

  of http://www.ni.com/white-paper/2991/en

  and he has run in LabView.  I know it works because the oscilloscope properly displays a waveform of pulse with the desired program in the frequency and duty.

  I noticed while the program is running, if I decide to change the operating factor that it updates dynamically the waveform of pulse on the oscilloscope.  However, if I change the frequency while the program is running it does not refresh in the oscilloscope.

  I think it's because the duty cycle is hung in a "shift register" while the frequency is not.

  I tried to plug the frequency in an as well shift register, and I was wondering if I could get some advice regarding the simplying or correction of my circuit diagram of the back panel shown here:

  http://i.stack.imgur.com/j6tdP.jpg

  I would be very happy / any Advisor.

  Thank you.

  Still a few ugly son (particularly wire error that buckle under the structure of the case), but seems to be well. I'm not really sure what you're asking - you still have a problem with it, or it does not work as expected? Have you tested it?

• If I click on anything whatsoever on my desk, a window appears: this file does not have a program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  Original title: all my programs have become more associated with their shortcuts in my windows start.

  All my programs became most associated with their shortcuts. If I click on anything whatsoever on my desk, a window appears: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. " I must do this for each shortcut? Microsoft Word, all my accessories, none of the links are attached to nothing. Y at - it a quick fix to my problem, or I am looking at a restore of the entire system?  Help, please!

  Look at the tutorial on changing to default file associations.
  http://www.mydigitallife.info/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-Windows-Vista/

  It should help to solve your problem.

  Thank you

  Marilyn

• Help! All programs will not work. I get the error message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!

  Should I re - publish so that else soeone looks like?

  If you wish.
  Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.

  Alternatively, you wait for the next person coming.

  The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Attachments: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I click on some attachments a box that says: "this file has no program associated with it for performing this action.  Create an association in the control panel to define the Associations. "  I don't know how to do this (if I'm unable to view these attachments).

  How to do would be to install the appropriate program to open attachments if it is not installed, if it is installed the easiest to set the association would be to save a copy of the file on the desktop, right-click and select "open with...". "in the context menu, and then select the appropriate program if it is shown in the dialog box or use search to find it if it is not.

  "endoftheroadgal" wrote in the new message: * e-mail address is removed from the privacy... *

  When I click on some attachments a box that says: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "  I don't know how to do this (if I'm unable to view these attachments).

• Try to run programs .exe produces the error message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  Hi all

  Help needed please.

  HP dx2250 microtower, running Windows Vista Home Basic Edition, recently attacked by Vista Antispyware 2010. Norton 360 V3 dealt with rather late the virus, but the fall of the remains.

  I am unable to open any .exe file (program) on the desktop, start menu, or through the browser. I can access the programs in opening a data file, for example, double-click a .doc file opens MS Word, etc.

  The error message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I tried an automated solution that is available via the forums (exefix_cu.reg) and also a manual suggestion to change the registry, also available through the forum.

  I also splashed by and purchased Regcure, who seems to have done no difference despite who claims to have removed 1500 odd errors. So I'll be request the refund on that one.

  I scanned the forums and found a large number of similar problems, but not one that is as complete as this.

  Any help much appreciated

  Hi all

  Thanks to anyone who has seen this link and made suggestions.

  I was looking at a similar, and is other problems came up with this very useful link, I am grateful to say has solved the problem.

  Sorry MapDrummer, but I'm not sure if it works for XP

  Follow this link to SpiritX who has the answer

  Hi Justalilkink,

  See also the post made by SpiritX on January 24, 2010 17:32 in the link http://social.answers.microsoft.com/Forums/en/vistafiles/thread/086ab3bb-d764-4fb1-a6f3-205bff708e63

  Thank you very much

• This file does not have a program associated with it for performing this action. Create an association in the control panel to set the Associtions.

  I get this message every time I get an email with a link and then can not click on the link. This happens on any email I receive. Just got the message. I am running Vista. I don't understand any of this message. If anyone can help me in simple terms... Please if you know of a simple way, then I would be so grateful. Thank you

  Hello

  1. you are using an email client or Webmail?

  2. If webmail, you use Internet Explorer browser? If so, which version?

  A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page. For example, if you have more than one web browser installed on your computer, you can choose one of them to be the default browser.

  Define Internet Explorer by default and see if that helps.

  Reference:

  Change the web browser by default:

  Reference:

  Change the programs that Windows uses by default:

• Deleting the definition of Type casuses control a lot of misreferences and program in the block diagram errors

  In LabVIEW 2010, I have a Def Type control i.e. a Cluster with several other controls within the Cluster. Apparently, the references to the controls in the block diagram are based on the order that the controls have been added to the Type definition command. The side effect of this is that if a control is removed from the command of Type definition, many of the done Variable reference in the block diagram or now either broken, or worse still, refer to wrong control in the Type definition. These problems are quite difficult to find and fix.

  Comment: If you create a control of Type definition and make a Cluster. Now add any controls to the Cluster in an order, let's say A, B, C, D. Their types does not matter. Now use the Type definition in one or more controls on the front panel. In the block mark references to controls inside the Type Def would control on FP. Now return to the Type definition and remove the command B of the definition of Type. Now, lots of errors appear. Broken links. But worse still, you see old references to B that now refer to C and old references to C are now referring to the old references to D and D are removed altogether, etc..  This side effect is much more errors, broken links and misreferences than expected otherwise.

  How add and remove controls anywhere in a Cluster in a Type definition, at will, without creating a whole bunch of errors in program, broken links and misreferences for controls in the Type definition that have not changed?

  
  

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

  Original title: can you help me?

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  You in fact 2 questions.
  I will answer the one who is the most important, for you it is.

  RE: Change startup programs

  You can access this way startup programs...

  Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
  To disable, uncheck the box in front

  To activate... check the box opposite.

  RE: Windows Defender cannot be found.

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Programming of the remote control

  I am able to program the buttons on the remote without problem but I have more than 60 deployed MD and would like to be able to program them all at once.  Is there a way to the DMM to write an application of advanced task that will program the remote button?

  Thank you

  Al

  Alan,

  
  

  Here's a technical tip I wrote on the programming of the remote control through the

  a HTTP mib.  Just create a task advanced under the task system

  for each color button.  Test & check if it works on a single DMP first and

  then send task for each color button to all of the DMP.  Once it is

  finished make sure you that you SAVE the configuration.

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

  
  

  ******************************

  
  

  You can use DMP MIBs to reconfigure the DMP Remote Buttons. VARIABLES =========   admin           = DMP Web Account Username   default         = DMP Web Account Password   a.b.c.d         = IP Address of DMP   dmm.company.com = FQDN of the Digital Media Manager(DMM) Appliance MIBS ==== ** Use the Following MIB to see the CURRENT Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Configure Buttons RED https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dwww.cisco.com%22 GREEN https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */MD%3Dhttp://www.google.com%22 YELLOW https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */_CMD%3Dhttp://www.yahoo.com%22 BLUE https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */%3Dhttp://www.apple.com%22 ASSIGN A BUTTON TO CAST https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dhttp://dmm.company.com:8080/etv-flash-webapp/app/etv_24_.htm%22 ** Use the Following MIB to see the NEW CONFIGURED Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Save NEW CONFIGURED Remote Mappings on DMP    -> Use the ADVANCED TASK to SAVE the DMP Settings.    -> or Directly on the DMP using the DMP-DM Web Admin    -> or HTTP MIB          ie.          https://admin:[email protected]/* */:7777/set_param?mib.save=1          https://admin:[email protected]/* */:7777/set_param?mib.save=1&mng.reboot=1 

• I have two Apple TV. The remote control that interferes with the other. For example, if I press stop on the distance she also those other programs. How to do this?

  I have two Apple TV. The action on each distance affects the other tv. For example if I press stop on the remote control will stop the program on the other tv to. How can I stop this from happening?

  Easy.  You must associate each ATV with one of the remotes.  Each ATV is not paired and will 'listen' to any distance.

  The trick is to cover before the other ATV when matching so the two do not listen.

  Silver or white remote control: pair or cancel the twinning of the Apple Remote with Apple TV (3rd generation or earlier)-Apple Support

  Siri remote control: http://help.apple.com/appletv/#/atvbc9953e63

  Don't know what models you have the ATV, but the whole process is the same:

  1. choose a remote control and an ATV.  Cover the front of the another ATV.

  2. hold the remote control in 3 inch they recommend, pair it with appropriate above process.

  3. choose the other remote, unlock the first ATV and block that you just paired.

  4. hold the second remote control 3 inches from the second ATV and pair it with appropriate above process.

  5. release the first ATV and enjoy.

• How to create a digital control (of any type) which can be increased or decreased by a 'unit' at the same time?

  As in the title.  I want to create a digital control (no current limitation on its type) with a range of 1 to 10 (and a step of 1).  The only difficulty that I have, is that the user should only be able to increase or decrease 1 at any time.  Code initiated by this change of value must have completed at least once before that the value can be changed again.  This is because code of VI is mainly contained in a while loop and control are read once at each iteration and its last value should not differ more than 1.

  Is this possible with LabVIEW 6.1 and if so, how?

  One of the solutions that I came up with so far is to disable the control immediately after its reading, and to turn it on again immediately seized is read the next time (I have to assume that the user is unable to click twice before the control is disabled).  It is an acceptable method, or is there a better way?

  I also had an idea of partially disable a normal digital control, such that it could not be typed in - only arrows remained operational.  However, I'm not sure how.

  James

  Hi James,

  You can use the two buttons (by releasing latch) and a digital display that shows the current value. Button increased the value and the other decreases. Store the value in a shiftregister to work with her.

  I don't know if your solution would work because use may directly enter the new value.

  It will be useful.

  Mike