Create self registered certificate for WebVPN

Similar Questions

• ASA 8.4.3 install the certificate for webvpn without CSR

  Hi guys,.

  I have spent a lot of time trying to install our wildcard certificate in the ASA for use with anyconnect, but was not permanently misserably. I red a lot of messages, but don't really know what I'm doing.

  Our Web server, I got DigiCertCA.crt, star.mycompany.com_cert.pem and star.mycompany.com_key.pem. The certificate is a certificate wildcard for mycompany.com.

  The DigiCertCA.crt file is the certificate called "DigiCert High Assurance CA-3" on the Web site: https://www.digicert.com/digicert-root-certificates.htm
  with the series "0A5F114D035B179117D2EFD4038C3F3B".

  On the SAA, I checked that I have no present trustpoint. Orders: "sh ca crypto certificates" and "sh crypto ca trustpoints" give no output.

  OK, so lets get started to set up and are having problems:

  ASA (config) # crypto ca trustpoint star.mycompany.com

  Domain name full webvpn.mycompany.com ASA(config-ca-Trustpoint) #.

  ASA(config-ca-Trustpoint) # Terminal registration

  ASA(config-ca-Trustpoint) #-revocation checking no

  Output ASA(config-ca-Trustpoint) #.

  Authenticate the crypto ca ASA (config) # star.mycompany.com

  Enter the base-64 encoded certificate authority.

  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-

  # CONTENT DigiCertCA.crt #.

  -CERTIFICATE OF END-

  quit smoking

  INFO: Certificate has the following attributes:

  Fingerprint: c68b9930 c8578d41 6f8c094e 6adb0c90

  Do you accept this certificate? [Yes/No]: Yes

  Trustpoint "star.mycompany.com" is a subordinate certification authority and is a non self-signed certificate.

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully

  ASA (config) # crypto ca certificate star.mycompany.com import

  ATTENTION: Registration certificate is configured with a complete domain name

  that differs from the fqdn of the system. If this certificate will be

  used for VPN authentication, this can cause connection problems.

  You want to continue with this registration? [Yes/No]: Yes

  % The FQDN in the certificate name will be: webvpn.mycompany.com

  Enter the base 64 encoded certificate.

  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-

  # CONTENT star.mycompany.com_cert.pem #.

  -CERTIFICATE OF END-

  quit smoking

  Could not import the certificate-

  Certificate contains a general practitioner of the device public key

  for point star.mycompany.com trust

  ERROR: Cannot analyse or check the imported certificate

  ASA (config) #.

  Please help me! I'm not a guru with certificates.

  Kind regards

  Tom van Leeuwen

  Tom,

  you create a container PKCS12 which includes certificates, and CA key.

  I don't know how to do with linux, no idea with Windows

  Michael

  Please note all useful posts

• How to create self bit code for dreamweaver even extracted from sublime?

  How do I create the code extract itself as easily as in the sublime because I think that it a good thing applied dakam dreamweaver thanks

  www.kursuskomputer.Web.ID
  

  Custom code snippets folder.

  Reuse code with Code snippets | Adobe Dreamweaver CC tutorials

  Nancy O.

• Two SMIME certificates for a contact. Only working

  I have contact (call her Kim). She has two email addresses:

  Kim (at) gmail.com

  Kim (at) yahoo.com

  I created two SMIME certificates for it - and got her to send me the cert appropriate using each email address. I used these emails to load the certificates on my Mac and iPad. However, Mac Mail, I can only send using SMIME when I use kim (at) gmail.com. If I choose another e-mail address - kim (at) yahoo.com, turns it off lock icon and the e-mail is sent "in the clear".

  If I look at the details in the Contacts, I can see his two addresses, and each has a star/checkmark beside it to indicate that the cert SMIME is available. I click on the star, and I see that each certificate is self-signed and "marked as approved for the < email address >." Looking in Keychain Access, I can see the two certificates, and do a get info on the two I can see that they are absolutely identical, with the exception of the email (and, of course, the key data).

  I know SMIME working - I use it a lot for work and it works if I send an e-mail to kim (at) gmail.com.

  Notes:

  1. I don't think this is a limitation of the capable SMIME email by contact address. I tried to make a double contact with an e-mail address by contact. It still does not work.
  2. I checked the email addresses - they both correspond exactly to what is in the cert.
  3. On my iPad, it works perfectly. I can send e-mail to kim (at) gmail.com and kim (at) yahoo.com and they get properly encrypted. It seems that there is a problem with the Mac only. I loaded the CERT of the enamel, exactly as I did for the Mac.

  BTW - I'm on the latest version of everything - OS, applications etc. I'm a compulsive updater :-).

  Ping! No one sees it?

  It is true that its probably rare - SMIME and two email addresses.

  I'm crossing my fingers :-)

• make a certificate for webutil.

  Hi all.
  
  I want to make the certificate for webutil I've done it before, but I don't remember that the way to do it now?
  I remember that I made certified using back order but I'm confused what is the command?
  any suggestion?
  
  
  Sarah

  @echo off
  REM ******************************************************************
  REM * This script generates a Self Signing certificate for
  REM * JAR files using the parameters defined in the signer.properties
  REM * file
  REM * This script only needs to be run once to create the certificate
  REM * The certificate will be valid for 360 days
  REM ******************************************************************
  REM * 18-JUN-2003 DRMILLS - Creation
  REM ******************************************************************
  
  for /F "eol=# tokens=1,2* delims==" %%i in (signer.properties) do set %%i=%%j
  
  "c:\DevSuiteHome\jdk\bin\keytool" -genkey -dname "cn=Sarah, ou=Development, o=Oracle, c=FR"  -alias yourname -keypass yourpassword -keystore "C:\Program Files\Java\jre1.6.0_03\lib\security\keystore"  -storepass jinitiator -validity 360
  @echo Certificate created...
  

  François

• Create safer self-signed certificates on IOS router?

  I use a router in 1921 and use partially as an AnyConnect (WebVPN) server for remote access in the location.  The certificate I used was a self-signed certificate & trustpoint generated on the router.  I am running as the last IOS available track to ensure that it has all the latest features.

  Do a quick check of SSL against her of Qualys, he seems to have a lot of weaknesses and known vulnerabilities.

  * Poodle TLS

  * TLS 1.0 only

  * SHA1

  * Diffie-Hellman 1024 bits

  * Some algorithms of older encryption which seem to be available (but I've never specified), as TLS RC4_128_MD5

  The encryption mechanism and controls to create the cert don't give me much choice in the matter.

  Is there a new or better way to create a more secure certificate chain on an IOS router?  I couldn't find the instructions anywhere.

  Robert

  Take a look at my guide to private networks virtual Suite-B.  It creates more secure certificates.  Note my comment about the minimum software version to use.

  https://www.IFM.NET.nz/cookbooks/Cisco-IOS-router-IKEv2-AnyConnect-Suite-B-crypto.html

• Can I generate self-signed certificates free for Nexus 9 K?

  Hi, I have 22 9Ks Nexus that I just upgraded to 3,0000 I4 so I can use the REST API.

  I use vRealize Orchestrator for automation, and I can't access the REST API on the Orchestrator help link, as certificates are at expiration.

  I can't find much information on this subject for the 9 K, unless the 9Ks are mode of the AIT, in this case I think that TACS are the only people who can generate a certificate.

  Does anyone know otherwise work around this? Otherwise, I'll have to approach a TAC case for 22 certificates generated :-/

  Cheers, Dom

  I'm not familiar with the technology with what you're trying to integrate, but here's a guide on how generate a custom SSC (self-signed Cert) on a device:
  #conf t
  #hostname DEVICE01-NOTE: must not be changed
  #ip - domain test.local

  generate a General key label SSC_KEY module 2048 rsa key #crypto

  #crypto pki trustpoint SSC_LOCAL
  #subject - name, CN = DEVICE, DC = test, DC = local
  #enrollment selfsigned
  # crl revocation checking
  #rsakeypair SSC_KEY 2048

  #crypto ca enroll COMMAND SSC_LOCAL HIDDEN: initiate the creation of SSC

  % Include the serial number of the router in the name of the topic? [Yes/No]: no
  % Include an IP address in the name of the topic? [None]:
  % Generate self signed certificate router? [Yes/No]: Yes

  Router self-signed certificate created successfully

  After this make sure that you do NOT change the host name of the device :)

• Create a self-signed certificate

  When I use ADM to access my router I always get a message that I have established a connection with "ip address", but the certificate belongs to IOS-self-signed-cert... etc. I generated RSA keys with the address. How to generate a new self-signed certificate that includes the ip address of the router? Thank you.

  self-signed certificate

  You can use the "crypto pki trustpoint name" command on the router to create a self-signed certificate.

  Check this link for configurtion:

  http://www.Cisco.com/en/us/products/SW/iosswrel/ps5207/products_feature_guide09186a008040adf0.html#wp1069686

• Creating a self signed certificate - how do you define the "storepass.

  Hi, I am trying to use ADT to create an AIR 2.7 file, but this is the first time I used the command line tool to build an and have problems to understand the process of signing.

  I can generate a keystore cert.p12 from the flash IDE, and it requires a password to the file (-storepass)

  I can also use ADT to create a certificate self-signed from the command line, you can specify here the - keystore (location cert) and - keypass (password for the key in the store)

  I can't find a way to generate a certificate self-signed, where you can specify the two passwords, one for the store (-storepass) and one for the key (-keypass).

  It is a problem because when I go to my file using ADT AIR package, it takes two passwords - storepass and - keypass seized may publish.

  Is anyone know how generate a .p12 self-signed certificate and have a control on the two keys...?

  I spent hours playing and research now so maybe the wrong end of the stick, could do with some help get beyond this issue.

  Thank you

  Sean

  There is that a single password is mandatory in package for ipa that until now I know

  Example of order:

  C:\AdobeAIRSDK\bin\adt.bat-Paquet - target the ipa-test - stores pkcs12 - keystore [KEYFILE] .p12 - storepassKEY PASSWORD] - set service-profile [FILE of AVAILABLE MOBILE] .mobileprovision [NAME of the IPA] .ipa [NAME of THE XML FILE] .xml [NAME of FILE SWF] .swf Icon_29.png Icon_48.png Icon_57.png Icon_72.png default Icon_512.png - Landscape.png default - default Portrait.png - PortraitUpsideDown.png default - default PortraitLandscapeLeft.png - PortraitLandscapeRight.png

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• HPDM: HPDM replace self signed SSL certificates for server HDPM and master repository

  I am trying to replace the automatically generated self-signed certificates (issued to DM) issued by DM server HDPM and master repository.  I'm NOT arbitration FTPS, HTTPS embedded HPDM or CERT Thin Client Agent server.

  I already have CERT for the installation of our own internal domain CA for FTPS in IIS and the built-in Apache HTTPS server.  These work properly and pass tests of repository for both protocols.  I also have questions for Thin Clients of our internal CA very well.

  I am interested in the HPDM real server cert and cert master repository. These are generated automatically when the two services start.  They use a very weak MD5 hash and key RSA 1024.  I can't find any documentation around that, with the exception of troubleshooting, in which you can remove these certificates restart services and they will be regenerated.

  Here are the paths certs\key
  HPDM % install Path%\MasterRepositoryController\Controller.crt (Cert repository)

  HPDM % install Path%\MasterRepositoryController\Controller.key (repository key)

  HPDM % install Path%\MasterRepositoryController\Client.crt (HPDM Server Cert)

  HPDM % install Path%\Server\Bin\hpdmskey.keystore (Both HPDM server and repository Certs and keys) (not sure what format it is in.  It is not PEM and P12 ok I can say)

  There are also some HPDM % install Path%\Server\bin\hpdmcert.key.  Don't know what it is.  It's the key to the server HPDM but deleting it does nothing and it is never re auto generated in one of my tests.

  I am able to replace the Controller.crt and keys with my own files CA internal those emitted very well.  The service started and no errors occur.  However if I replace the Client.cert (HPDM Server Cert) with my own service will start but there are Socket SSL errors in repository logs and the HPDM server could not connect to the master repository. I have no idea where the key file is supposed to be for HPDM Server Cert.

  Can anyone help with this?  I can't find the configuration files for the service to generate their own certificates.  If I did I would try at least to change the config to do not use MD5.

  Hello

  These certiricates between HPDM server and MRC are not designed for customizable. Please submite one scenario if you have concerns of security on it.

  Just for info:

  hpdmcert. Key is for communication between the server HPDM and gateway HPDM

  hpdmskey.keystore is for communication between the server HPDM and MRC

  server_keystore is for the commhucation between HPDM server and the Console HPDM

• Configure SSL for OUD 4444 port Admin port-&gt; replace the self signed certificates used

  Hi Experts,

  When installing OUD choose Certification self-signed for ports 1636 and 4444.

  Later I change the certificates used by the port of 1636 to a new key file containing the CA certificates. (Track the steps of: https://docs.oracle.com/cd/E52734_01/oud/OUDAG/security_clients_severs.htm#OUDAG00050)

  But same procedure does not have to replace the self signed certificates used by ports 4444!  Everyone is configured SSL (with Cert CA) on the Administration port?

  I couldn't even start the servers, you see an error:

  """

  category = gravity CORE = NOTICE msgID = 458891 msg = the directory server sent a notification to alert generated by the class org.opends.server.core.DirectoryServer (org.opends.server.DirectoryServerShutdown alert type, alert ID 458893): the directory server started the shutdown process.  Stop was launched by an instance of the org.opends.server.core.DirectoryServer class and the reason for the closure was an error occurred trying to start the directory server: NullPointerException (File.java:277 AdministrationConnector.java:843 AdministrationConnector.java:675 AdministrationConnector.java:182 ConnectionHandlerConfigManager.java:356 DirectoryServer.java:2932 DirectoryServer.java:1584 DirectoryServer.java:10108)

  «[27/sep / 2015:06:22:53-0400] category = gravity = NOTICE msgID = 458955 msg = the directory server CORE is now stopped "«»

  Post edited by: 1976902

  Sorry, I cannot help here - here are a few possibilities.

  Change connector Administration certificate

  https://docs.Oracle.com/CD/E52668_01/E54669/HTML/ol7-genssc-auth.html

  The failure of the handshake could occur for various reasons:

  • Incompatible encryption suites in use by the client and the server. This would require the customer to use (or allow) a suite of encryption supported by the server.
  • Incompatible versions of SSL in use (the server can only accept TLS v1, while the client is capable of using SSL v3 only).
  • Incomplete trust for the certificate of the server path
  • The certificate is issued to another area.
  • incomplete certificate trust path between the certificate for the server, and a certification authority root.
  • In most cases, this is because the certificate is not present in the trust store

• TLS fails on linux self-signed certificates

  on firefox 38.1.0 under centOS 6.6 I have some problem with TLS.

  When it first happened I re fact cert using keys of 2048 bytes. It seemed if address the issue when you navigate to similar addresses to https://localhost/somesite, however, I have try https://localhost:10000 with the fact that it still fails:

  An error occurred during a connection to localhost.localdomain:10000. The certificate server included a public key which was too low. (Error code: ssl_error_weak_server_cert_key)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  The signing certificate is algorithim-> PKCS #1 SHA-1 with RSA encryption

  The algorithim public key is-> PKCS #1 RSA encryption

  The key has been creating 07/06/15 for a period of 10 years is a Version 1 cert issued by myself with the info
  E = [email protected]
  CN = localhost
  UO = hq
  O = permite
  L = Stone Mountain
  ST = ga
  C = us

  It was a problem of webmin.

  To fix this /etc/webmin/miniserv.pem edition replace the cert and private key sections.

  Use a new generated key and self-signed certificate. If you follow the instructions of centOS, the location of the files are /etc/pki/tls/private/ca.key and /etc/pki/tls/certs/ca.crt

• How to create the file .bar for production mode?

  Hello

  How to create a file .bar for production mode?

  When Flash Builder, I configure my project for the mode of Production, he asks me a RIM certificate that must be registered (and then need a CSI file?). Where can I find this file?

  Thank you

  Signature of application information has not yet been published.  You can submit your application unsigned.  In addition, in FB4, in the Properties window of the project, under the Flex compiler, you can add

  -debug = false

  to compile without debugging information.

  Otherwise, .bar file creation is done in a regular compilation with BB CLI package.

• Self-signed certificates Z10 blackBerry

  I try to lateral load of the self-signed certificates on the device for testing of the reasons (see various other misfortunes listed elsewhere).  Settings > Security > certificates he seems to have the ability to do.  I can't find any documentation as to where certificates must be located to be detected.

  Some research on Google mentioned something about the process in which concerns the PlayBook, but that requires that they be placed in the Cert folder on the device.  The Z10 is not this standard file and it is not possible (AFAIK) to create this folder at the root of the device.

  Thank you

  The Z10 has the same Cert folder in the same location as the PlayBook, and the installation of a certificate process is the same, so documentation on who should serve you well.

  The folder is visible through network sharing, when you turn on sharing in the settings and display from a PC on your network... in case it wasn't clear.