Creating a form

Similar Questions

• This program is best used to create custom, forms to say double surveys and networks, etc.

  This program is best used to create custom, forms to say double surveys and networks, etc.

  http://answers.Microsoft.com/en-us/Office

• Created the form based on the table - created new line - how to retrieve line editing?

  Hello

  Sorry for such a stupid question, but being new in APEX, I don't know much about how the end user on a form.

  I have created a new form (not in a table), based on a table.

  I ran the form and created a new line.

  After the line was created, the form comes back ready to create another line (all the values in the fields).

  How can I go on the recovery of the line, I added just to make a few changes?

  Again, please forgive my ignorance.

  Mason

  Masong says:

  Sorry for such a stupid question, but being new in APEX, I don't know much about how the end user on a form.

  Or about how best to use this forum. Always include all the details of your environment and your application when you post a question so that we can provide a solution version - and context, case-specific: How to get the answers from the forum

  I have created a new form (not in a table), based on a table.

  I ran the form and created a new line.

  After the line was created, the form comes back ready to create another line (all the values in the fields).

  How can I go on the recovery of the line, I added just to make a few changes?

  Ensure that the attribute key back to point in the line process of... The ARP process is defined to return the value of PK of records inserted in the element of key primary page and delete any Reset Page clearly session state process created by the wizard page.

• How to create a form with 4 "column" in Eloqua?

  Hi and I thank you in advance for the answer finally. I need to create a form in eloqua with column 4. Is this possible? If it is possible how do you realize this?

  Thanks Pietro

  Pietro - if you view the present in our section Do It - you're more likely to get a faster response! Good luck. This is taken by the operations marketing on Linkedin group!

• Can I create a form using the object styles in InDesign

  Hello

  Is it possible to create a form in the object Styles I can create in InDesign? I know that I can attribute some qualities, but I would like to create a capsule form that will be repeated throughout a page of lists in our sites.

  So far, I have to copy, paste, and anchor the object in the text which is quite time that we have thousands of ads, and life is too short for mundane tasks.

  If I can create a form of object Styles, by entering its dimensions, it will allow me to create the style for import into InDesign, 4 d, our CMS.

  If not, can we have it in a new construction, please Adobe?

  I look forward to your reply.

  Thank you

  Roy

  That can be done with tabs and styles nested using underscore with a custom stroke style. I hope that these screenshots should explain it...

  

  

  

  

• I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  Mr President.

  I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  

  the page source is

  <?xml version='1.0' encoding='UTF-8'?>
  <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                  xmlns:f="http://java.sun.com/jsf/core">
    <af:panelFormLayout id="pfl1">
      <af:group id="Group">
        <af:inputText value="#{bindings.VoucherId.inputValue}" label="#{bindings.VoucherId.hints.label}"
                      required="#{bindings.VoucherId.hints.mandatory}" columns="#{bindings.VoucherId.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId.hints.precision}"
                      shortDesc="#{bindings.VoucherId.hints.tooltip}" id="it1">
          <f:validator binding="#{bindings.VoucherId.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId.format}"/>
        </af:inputText>
        <af:inputDate value="#{bindings.VoucherDate.inputValue}" label="#{bindings.VoucherDate.hints.label}"
                      required="#{bindings.VoucherDate.hints.mandatory}"
                      columns="#{bindings.VoucherDate.hints.displayWidth}"
                      shortDesc="#{bindings.VoucherDate.hints.tooltip}" id="id1">
          <f:validator binding="#{bindings.VoucherDate.validator}"/>
          <af:convertDateTime pattern="#{bindings.VoucherDate.format}"/>
        </af:inputDate>
        <af:inputText value="#{bindings.Credit.inputValue}" label="#{bindings.Credit.hints.label}"
                      required="#{bindings.Credit.hints.mandatory}" columns="#{bindings.Credit.hints.displayWidth}"
                      maximumLength="#{bindings.Credit.hints.precision}" shortDesc="#{bindings.Credit.hints.tooltip}"
                      id="it2">
          <f:validator binding="#{bindings.Credit.validator}"/>
        </af:inputText>
      </af:group>
      <af:group id="g1">
        <af:inputText value="#{bindings.Lineitem.inputValue}" label="#{bindings.Lineitem.hints.label}"
                      required="#{bindings.Lineitem.hints.mandatory}" columns="#{bindings.Lineitem.hints.displayWidth}"
                      maximumLength="#{bindings.Lineitem.hints.precision}" shortDesc="#{bindings.Lineitem.hints.tooltip}"
                      id="it3">
          <f:validator binding="#{bindings.Lineitem.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Lineitem.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.VoucherId1.inputValue}" label="#{bindings.VoucherId1.hints.label}"
                      required="#{bindings.VoucherId1.hints.mandatory}"
                      columns="#{bindings.VoucherId1.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId1.hints.precision}"
                      shortDesc="#{bindings.VoucherId1.hints.tooltip}" id="it4">
          <f:validator binding="#{bindings.VoucherId1.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId1.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Debit.inputValue}" label="#{bindings.Debit.hints.label}"
                      required="#{bindings.Debit.hints.mandatory}" columns="#{bindings.Debit.hints.displayWidth}"
                      maximumLength="#{bindings.Debit.hints.precision}" shortDesc="#{bindings.Debit.hints.tooltip}"
                      id="it5">
          <f:validator binding="#{bindings.Debit.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Credit1.inputValue}" label="#{bindings.Credit1.hints.label}"
                      required="#{bindings.Credit1.hints.mandatory}" columns="#{bindings.Credit1.hints.displayWidth}"
                      maximumLength="#{bindings.Credit1.hints.precision}" shortDesc="#{bindings.Credit1.hints.tooltip}"
                      id="it6">
          <f:validator binding="#{bindings.Credit1.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Particulars.inputValue}" label="#{bindings.Particulars.hints.label}"
                      required="#{bindings.Particulars.hints.mandatory}"
                      columns="#{bindings.Particulars.hints.displayWidth}"
                      maximumLength="#{bindings.Particulars.hints.precision}"
                      shortDesc="#{bindings.Particulars.hints.tooltip}" id="it7">
          <f:validator binding="#{bindings.Particulars.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Amount.inputValue}" label="#{bindings.Amount.hints.label}"
                      required="#{bindings.Amount.hints.mandatory}" columns="#{bindings.Amount.hints.displayWidth}"
                      maximumLength="#{bindings.Amount.hints.precision}" shortDesc="#{bindings.Amount.hints.tooltip}"
                      id="it8">
          <f:validator binding="#{bindings.Amount.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Amount.format}"/>
        </af:inputText>
      </af:group>
      <f:facet name="footer">
        <af:button text="Submit" id="b1"/>
        <af:button actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"
                   disabled="#{!bindings.CreateInsert.enabled}" id="b2"/>     
        <af:button actionListener="#{bindings.Commit.execute}" text="Commit" disabled="#{!bindings.Commit.enabled}"
                   id="b3"/>
        <af:button actionListener="#{bindings.Rollback.execute}" text="Rollback" disabled="#{!bindings.Rollback.enabled}"
                   immediate="true" id="b4">
          <af:resetActionListener/>
        </af:button>
      </f:facet>
    </af:panelFormLayout>
  </ui:composition>
  
  
  
  

  Concerning

  Go to your VO Wizard, select the tab of the entity and to check if both the EO is editable or not.

  See you soon

  AJ

• Create a form master detail.

  Hello

  I am creating a form master detail following this tutorial: Blog of Zeeshan Baig: master form design / detail in Oracle ADF

  However, I'm stuck at this stage where I need to create a link to the view. I'm not able to add the departmentview departmentid. The Add button is not turning on.

  Please refer to the screenshot below. Thank you.

  

  You have chosen DepartmentsView in both places.

  You must choose the DepartmentsView to the source and the EmployeesView in the destination.

  See you soon

  AJ

• Create a form without signature and signature message when it is opened?

  I am creating a form to the user to enter and record the information of user name and password with the way - to of. I don't want a signature on it and I would not have the message about the signature when the user opens the form. I can do and if so, how?

  Just don't add a Digital Signature field...

• How to create a form with a submit in CC button animate using Actionscript 3

  How to create a form with a submit in CC button animate using Actionscript 3. The file will first be a SWF but will also have the flexibility to export as HTML5

  I've searched high and low for an example of code for this entry.

  Can someone help me please?

  Thank you

  You can use the same graphic assets of basis for two projects, but the coding will be different for everyone.  You must work on the project of a code at a time.

• I created a form with checkboxes.  A question has two boxes for a 'yes' another being a 'no '.  I just want to be able to select a single box, but currently, I choose both

  I created a form with checkboxes, I have currently two checkboxes in a question that I wish I could only check a box and make it mandatory that should be checked only one box.  Currently, I am able to select the two check boxes.

  Give them the same field name, but export values.

• How to create a form that fills a page of review before being submitted?

  Anyone used Eloqua to create a form that fills a review page that the bidder has to address in order for the form to fill out?

  The sequence would be:

  1. landing page/form
  2. landing page with the data in the form of review
     • The second page with the form data will have to be approved before the presentation or the person could go back and change the data

  Thank you

  Jennifer Rash

  Hi Jennifer,.

  The way to do is to create a form with a field, mapping on a contact field you can set a value from us Let's say 1. and then on the second form, if the user access, he or she cannot present until whoever the approver is changes the value 0 (zero). Once the approval is made (assuming that anyone who needs to do this) the flag should be set to zero.

  Your form 2 form processing step can guide them in appropriate redirection, or javascript on the form page 2 can promot the user to wait for approval.

  Hope this helps... I would like to know if that's what you're looking for.

  Thank you

  Amit

• I have Acrobat Pro 10, when I installed the CD player, it has affected the way I was able to move text boxes when I create a form of gall, he has also affected my ability to release and change the properties of the fields /, I'm I suspect m

  I have Acrobat Pro 10, when I installed the CD player, it has affected the way I was able to move text boxes when I create a form of gall, he has also affected my ability to release and change the properties of the fields /, I'm I suspect my off lucky cat Adobe support will not help , nor a cure to.  Is there a place to find updates to Acrobat 10, if I uninstall my current program?  I still have my original CD and paperwork.  Adobe acknowledge that they have created this problem.   I worked very intensively with Acrobat Pro 10 on the form for a non-profit, I do part, and it happened immediately after that I was testing a form I created in Acrobat 10 to test with CD player. Windows 7 operating system

  This is usually due to the function 'Snap to Grid' is enabled. It can be accidentally activated via the keyboard, so this may have been what happened.

• Is there something I can put in a source microsoft document that will allow Acrobat search automatically fields when you create a form?

  Stresses, stresses with a leading colon, etc. works only about 25% of the time.  In other words I create PDFs from Microsoft Word, Excel, Power Point and generic scans.  I then use the automatic form field creation

  to convert the PDF to a form to fill out.  Automatic detection of fields on average maybe locates 25% of what I would be form fields to fill out.  I have spend hours to manually create the form fields.  Acrobat uses logic to

  Locate the fields. If I knew what it was I'd build source documents differently.  For many years in Live Cycle Designer worked very well

  .

  Dear player,

  Thanks for the reply.  I thought about it!  I was using an older impression to the driver (part of an access macro I use) pdf...  When I use the print to the pdf driver that is installed with Acrobat DC fields are found as in the online tutorial.  I was very pleasantly surprised.  Yahoo.

• Server behaviors > insert a record said before using this server behavior, please create a form.

  Wow,

  I feel frustrated now and way over my head, below I have attached the registration page created with the form created next to the image.  Then, I went 'Bindings' and select 'Recordset' for this page and name the Recordset 'register '.  Please, everything works fine it has access to my database and the table and creates the Recordset file named 'register' now I'm going to "server behavior" as it says in the tutorial and select "Insert record" I get a prompt indicating before using this server behavior, create a form.  But my form is sitting there in the middle of the page!  My head is about to explode here!

  

  Thank you

  Carl

  Dallas4664 wrote:

  David powers,

  You said that "the opening form tag is not a name or an id to the form.

  So in my source code it should be something like:

  Then all my above entry codes

  You could try that, although when I tested it I have been authorized to access the behavior "Insert record" without any id or the name of the form.

  DW has created for me:

  Therefore, this

  became:

  As already said I would not advise using DW server behaviors.

• I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why.

  I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why / tell us step by step what we should do?

  OK, I re-read your question. It's actually expected behavior. The user must manually send the email.

  If you want it to be a silent process, then you must either install a script on the local computer of the user who will do this, or use any email but something as a service web to which you directly submit the form data.

• I have created a form in Indesign. Is there a way to create the default text in a text field that displays the interactive pdf "insert text here" in the text field?

  I have created a form for the company, so that I work. It is a form that will be used in several offices and has buttons, drop downs and text fields. One of the text fields has a requirement that when the PDF file is opened, the text field has something written in there already, as an example (and one only) INSERT the TEXT HERE. I created the text field in Indesign and used the text tool to type in the area of the body-copy required. After that I have to export it as an interactive PDF, text in the text field disappeared.

  Drop-down lists give an option for a default choice, but I don't see a way to create default text in the Panel of buttons and forms for text fields. Is there a workaround or a hidden feature?

  Thank you!

  Set it in Acrobat.