Creating a homepage for Apex using horizontal Images with label list?

Similar Questions

• Centering a horizontal image with label list...

  Hello
  
  Image list is aligned to the left by default. I would like to know if it is possible to it aligned in the center of the page? If so, please inform me. Thank you in advance...
  
  Chris :)
  
  Published by: Chris K.W. on December 11, 2009 08:54

  You have caused a dispute very little. Microsoft on the other hand...

  To do this using CSS, you consider bugs in Internet Explorer, which means that it takes 4 times more than necessary. We will not go into the chain of unfortunate who is ensuivie of events involving virtual machines, but it meant that I could not test this on IE8.

  1. define the model for the region containing the "model No.".

  2. to deal with broken Microsoft browsers, enter

  in the header of the region, and

  in the foot of the region.

  3. Add this internal style sheet in the header HTML page

  If that doesn't work in IE8 not then try to remove 'lt' and '8' in step 2.

  This will bring all the horizontal Images whose label says on a page: we can change this option if necessary, but skip redundant code if it is not necessary.

• Create a vSwitch for iSCSI using 10 GB HBA

  Hi all.

  Its been a while that I have installed a new system. I have a basic configuration for the tests, single server with a 10 GB HBA (HP 4000 G2 SFP +) connected directly to a SAN using a cable CAR.

  My question is should I see the HBA listed as material and I would be able to add this to the iscsi switch, that I created? I don't see my NIC 1 GB cards at the moment. So either I'm away or my card is not compatible.

  If it's iSCSI it will appear as a network adapter. If it does not appear as a NETWORK card you should see if HP has a driver for the exact model of card network.

• Best method of referencing for the use of images in the form of text?

  Im trying to take account of accessibility and SEO, but I really want to use images for my header items and menu.

  This is the best method for this? It lists some other methods below but im wondering if there is a solution to recommend.

  http://StopDesign.com/Archive/2003/03/07/replace-text.html

  A simple example of the method is here;

  http://StopDesign.com/IMG/articles/replace-text/ex_hello.html

  A span is put around the menu item and set display to none. A div is placed around the space, with a value of height and background image.

  Ive also heard of this method, which allows you to use custom fonts and id to use pretty images.

  www.mikeindustries.com/blog/sIFR/

  Thank you

  Webmaster guidelines from Google

  Special attention to the "quality guidelines".

  http://www.Google.com/support/webmasters/bin/answer.py?answer=35769#3

  Without knowing what you are hidden in the pages of Joomla, I can't offer much advice except to err on the side of caution.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• Save before exit Skillbuilders (version 3.0.1 for APEX 4.0): problem with some element of list in the form Manager

  Hello

  I have a problem with the plugin save before exit that I downloaded from Skillbuilders. As I use Oracle APEX version 4.0.2 and Oracle 10 g r2 database; so I downloaded one that says "Save before release (version 3.0.1 for APEX 4.0)" skillbuilders and follow-up of their documentation to import the plugin and use it.

  My problem is that even if I do not make any changes to data in the form and go to another tab. the alert message always appears, and by the way, I have an element of list manager on my form and it gets highlighted. So, even if I make the changes or do not change; still, the alert message is displayed and highlights the element of list manager. I think maybe the problem is to have a crèche in the form list item. I have reproduced the same problem in my personal workspace. Here are the details.

  http://Apex.Oracle.com/pls/Apex/f?p=55129

  Details of the workspace

  Name of the workspace: raghu_workspace

  username: orton607

  password: orton123

  App # 55129

  Page: 2 - has the element of list manager.

  Page 3 - works fine without the element of list manager

  Please help with possible suggestions.

  Thank you

  Orton

  Orton,

  I have connected to the workspace you and added a replacement JS file that corrects this error.

  If please, give it a whirl and let me know if you find other problems with it.

  It is to the 3.0.2 version of the plugin and I do not know if this even fix will work for your local Apex version earlier.

  When you are ready to go to the APEX 4.0.2 Please contact me directly for assistance. In the meantime, I'll work on the creation of a patch for this kind of new downloads of the plugin will contain this change.

  Greg

  [email protected]

• NVIDIA GTX 970 will work for the use of CUDA with Adobe Premiere CC 2015?

  So it's my graphics card: https://www.amazon.com/gp/product/B00R3NK2LE/ref=oh_aui_detailpage_o05_s00?ie=UTF8 & psc = 1

  I don't think that I am currently using Nvidia CUDA with Adobe first CC 2015. My card is compatible with this feature?

  Also, if the answer is "Yes", when I install drivers Nvidia CUDA, I uncheck the display driver? Since I also use my rig for games, I want to make sure I'm not downgrading my display driver. Or is the necessary display CUDA driver?

  Thank you.

  It will work very well.

  You only need the CUDA for Mac pilot.  The normal display driver has everything you need for Windows.

• Individual unique watermark printing a document for many users in accordance with the list in text file

  Mr President.

  I have a unique requirement. I have proposed something and I put a single PDF file in this folder. I also have a text file with the name and number of the user. I want to make a script that will read the name in the list and print a copy of the PDF document with the name and the number one watermark diagonally on each page. Then the second name is included in the list and printed. All the names on the list should be printed with the unique name & number a watermark on each page.

  Can help me please, in the script.

  First of all, you have posted in the forum of reader. You have the drive or the complete Acrobat? You can not do with precedent, only the last (and then even in special circumstances).

  What you're asking for is possible to achieve (in Acrobat), but it requires a script to measure. You cannot expect the people here to write this script for you. We will be happy to help you with any specific questions you may have, but if you want someone to create the whole thing for you, you will probably need to hire to do it. I have developed several similar tools in the past (for example: Scripts Adobe custom: Acrobat - file PDF Batch Watermark A ), so I'm happy to create this script for you, for a fee.

  You can contact me to discuss it further, if you wish.

• Help create a VLAN for domestic use.

  I use Cisco SG300 and SG200 series switch. I put my home network as attach photo.

  I want to configure VLANS with these condition

  1. all ports can connect to the internet via ADSL router.

  2.VLAN10 (home alarm and IP camera) can access residential, access point and PC file server to connect

  3. each port can connect to PC file server

  I am new to network and do not try to install myself and understand not static route.

  Thank you.

  Diego

  [email protected] / * /.

  Hi paylo,.

  Are you sure you want to do this on the switch instead of the router? Will you use static IP addresses for VLANs, or do you want your router to deliver DHCP?

  To continue using the switch for routing inter - vlan, make sure the SG300 is mode layer 3.

  1. If you are currently in mode layer 2, open a CLI connection and issue command:

  router adjustment system mode

  Take note that this will delete your current config and the switch will reboot.

  2. create the VLANS on your switch under management VLAN-> create a vlan

  3. go to IP Configuration-> interface ipv4 and assign each vlan a static IP address for the switch in the subnet for the new LAN virtual

  4. vlan management-> the Interface settings. I leave all ports as trunk ports, or change the Trunk ports, if you have already changed their.

  5. vlan Management-> Port VLAN membership. Assign your VLAN ports appropriate.

  6. when everything is all connected, you should be able to see the switch of the static routes for you already created under static Configuration of the IP-> IPV4 routes. Make sure all your subnets are there and demonstrate local range type

  7. you may need to add a route for example 0.0.0.0 with the next hop is your router

  At this point, you should be up and running, with all them VLAN connected to each other and to the internet.

  If you want to restrict access between them VLAN, you will need to create access control lists.

  You must first create an ACL (Access control-> ACL based IPV4) and give it a name. then move on IPV4 based ACE where you put real access control rules.

  This is a sample set of rules that I did, it will block all access between two subnets (each vlan that you created above should be its own subnet) and allow certain traffic like 3389 - remote desktop, etc. You will need to customize according to your needs and IP subnet. So for ex, to enable the Xbox access the file server, rather than all - everything, you put the xbox or IPs specific subnet as the source, the file server as destination, and the ports as source ports. Don't forget to do the reverse of the rule as well.

  

  Then go to-> links ACL access control and bind the list control access to ports there.

  Hope that helps, good luck with your game to the top.

  Best,

  David

  Don't forget to note useful messages and identify the right answers.

• problem when creating a plugin for ps using Qt on Mac

  Hello friends,

  I am writing a plugin of photoshop on Mac and to create the UI with Qt. But when I show just a simple dialog, photoshop menu was gone and that he was not responsible even after closing the dialog box.

  = CODES OF =.

  voidPhotoshopPlugin::ShowDialog( )

  {

        intargc = 0;

        QApplicationa(argc, 0);

         HelloDialog w(NULL, 0);

         w.show();

         a.exec();

  }

  I know that the QmfcApp for windows, which will be responsible for the migration of Qt & MFC , and it works for me. But I can't find a Mac version of the qmfcApp.

  Any suggestions will be greatly appreciated.

  Thank you
  Daniel

  http://doc.Qt.Nokia.com/latest/ExportedFunctions.html#void-Qt-Mac-set-dock-menu-qmenu-menu

  Sub qt_mac_set_native_menubar (bool enable)

  Indicates whether the application should use the bar menus native on Mac OS X or be part of the main window. This feature is enabled by default.

  In Qt 4.6, this amounts to QApplication setAttribute (Qt::AA_DontUseNativeMenuBar)::instance()->;.

• How can I create extensible components for re-use?

  How can I create a button that stretches (such as the scale-9) with the text label? I create all of my graphics in illustrator rather than photoshop to get real FXG markup instead of embed all images?

  This has been addressed in the FAQ.

  Please see if the discussion he answer your question.

  -Bear

• I already have InDesign and Bridge scripts start and you want to create a plugin for them using Extension Builder?

  Startup files are Javascript in the InDesign file, but file Bridge is converted to JavaScript binary file.

  I have installed Eclipse and Extension Builder. Then what?

  And this requires rewriting the code or just a short process of conversion?

  Thanks in advance.

  "The supported applications

  The following office applications Adobe supports the CEP and IPC e-mail monitor-based extensions. Versions of Creative Suite of products are supported only Flash-based extensions. Creative cloud releases are supported by HTML5/JavaScript extensions; the model Flash/ActionScript is

  disapproved, and support is removed:

  Host name for InDesign: IDSN

  Host of InCopy name: Clement POUPARD

  Hostname Illustrator: ILST

  Host name of Photoshop: PHXS

  Host name of prelude: LTIP

  Hostname first: Agency

  Host name of Dreamweaver: DRWV (for Flash extensions only)

  Name of the host Pro Flash: FLPR (HTML extensions only)

  "Hostname afterEffects: AEFT.

  Info:

  http://wwwimages.Adobe.com/content/dam/Adobe/en/DevNet/creativesuite/PDFs/CC14_Extension_S DK.pdf

• Contact information for return pixel Imaq image with the mouse click event

  Hello

  I'm trying to get the coordinates in pixels of an image Imaq based on a mouse click event, similar to this post and this post. The problem is that with the first post, I get the coordinates in the image control and hesitate to trust them, they seem to have the Center origin, may return negative coordinates and do not represent the actual size of the detector that I use (512 x 512). It also returns the coordinates outside the actual data when it is clicked on the image control framework. The second method returns simply null coordinates. What I want are the coordinates of the pixel displayed when hovering the mouse imaq image control framework.

  What baffles me, is that I tried the second method with a png stock file and it works fine, it is only when I create an image from the data of my camera than the coordinates are returned null. Note data views of camera under control of image very well.

  Any ideas would be useful. Enclosed is a picture of the offending code and the Panel before displaying the camera data is coming (I know it needs some cleaning).

  Thank you

  Tyler

  for help, please send your vi

  but I think that this example vi is your solution

  check this vi

• Using sprite image with statusGreen class

  Hello
  
  I'm trying to replicate something that I found in the Bug tracker sample application - using the sprite images to display red/green/yellow orbs.
  
  Home page of the bug tracker uses the following to display in Orbe

  <img src="/i/f_spacer.gif" alt="" class="statusGreen">

  If I repeat that in my 25 theme Apex 4.2 request, it does not display the image of the orb.
  
  Inspect element generated through chrome, as I can see the class has been recognized and the sprite image has been found - but no image displayed on the page?
  
  Ideas?
  
  Scott
  
  Published by: scott - remember to change the subject

  If you have added only the img tab, then this is not enough.

  CSS is dependent on a class of detailedStatusList for the AMT, and then being inside a LI and the, it appears inside an A.
  Like this:

  
  
   Message
  
  
   This one is yellow
  
  
  

  If you replicate this structure, you will get the orbs.
  I was able to copy paste the HTML here in a brand new application with theme 25 and get enough green and yellow orbs.

  If you only want the orbs, then inspect the tags and copy the CSS so that you can apply it to your own structure of the element.
  I hope this helps.
  -Jorge

  Published by: jrimblas on April 4, 2013 23:01

• [Bug of LabVIEW report] 'Create all the constants' does not create a constant for the controls when mixed with flags

  The shortcut of the comics 'Create all the constants' cannot create a constant to a control when it is mixed with flags:

  

  Colors of the palette is a table control, the other two are indicators.

  

  results in:

  

  With the help of the 'constant to create' (which is something else altogether) works very well with the table control (of course, the constant is not connected to the Terminal in this case).

  Tested in LV 2016 64 bit on Windows 7

  You can change the functionality of the right click plugin by opening the Terminals_core.vi all the wires in the .llb following and by removing the structure of matter on the image below (keep remove it just method the structure around him). He did what you wanted in the original post, but is not very useful when you start to use it on items with multiple terminals (especially multiple output terminals). The code makes it seem quite expected, he travels all terminals it concludes and checks whether it is an input or output terminal. If it's an entry, it creates a constant, if it is an output, it does nothing. The change that I did just creates a constant whether it is an input or output.

  time Board \resource\plugins\PopupMenus\edit and diagram\Wire all Terminals.llb Unwired

  

• Using an image with transparency in the book module and keep the transparency?

  Hello.

  Let's see if I can explain my question, I'm not an experienced LR or PS user (and not in the English language)

  I changed an image in PS and cut out a part of it and pasted into a new layer and then adjust the opacity of the background at 0%.

  Then I saved the picture in PSD format and imported to LR to be used in ledger. When I then use the peak and attached to the photo book have a white background.

  What I want is that only the cutting part appears in the book and the rest of the area of the image is in the same color as the color of the pages (in my case clear yellow).

  Is it possible to do what I want to do and if it is, how?

  Shovelc wrote:

  What I want is that only the cutting part appears in the book and the rest of the area of the image is in the same color as the color of the pages (in my case clear yellow).

  Is it possible to do what I want to do and if it is, how?

  You should be able to do this by building the PSD file layer of the same color as background color LR ledger. The key to making this work correctly is by matching the two background colors. In the book LR module background panels 'Background color' color picker icon, right-click in the color selector box, click on select HSB. In the PS use fill and set the background color using the STL values inside the book LR module. Color space ProPhoto RGB native of LR in PS helps prevent the background color to move within LR.

  Example for 59, 16, 93 HSB