Similar Questions

• page apex_admin not display for the runtime environment and application deployment using command-line

  Hello

  I installed APEX 4.2.6 EPG on Windows 7 Professional (32 bit) with Intel Core i3 processor.  Oracle XE 11.2 Win-32 DB.

  All the installation steps followed according to the Installation guide for the Apex.  It is a fresh and new installation.

  

  Install the log shows below -.

  Thank you for the installation of Oracle Application Express.

  Oracle Application Express is installed in the APEX_040200 schema.

  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;

  GETHTTPPORT

  -----------

         8082

  I did only the installation of runtime using apxrtins.

  ' Step ' grant of privileges of connection "according to the document was smooth without any problems.

  SQL > ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 20 scope = both;

  Modified system.

  SQL > ALTER SYSTEM SET SHARED_SERVERS = 5 SCOPE = BOTH;

  Modified system.

     

  I played "Creating a workspace manually" and met above question.  For installation of runtime, is this unnecessary step?  Or any other step I'm missing?  Help, please.

  Thank you and best regards,

  -Anand

  Hi Anand,

  anand_gp wrote:

  All the steps I did in my development environment and no problem following the steps.  And there is no question of the problem of the EPG or a bad image of loading because the other workspaces and applications out there are working well.  My question was, when I tried to copy an application via command line in an another 'new space and work with some new application ID', wheather my steps were correct?  If so, then why does not using the URL of the application.  And since it is in full flight development environment, where other workspace / applications work fine, how to connect to the new workspace I created using the command line?  If you look at my steps, I did provide any user name and password associated with this workspace all in creation.  When all this is going very well, so I will try in my new machine that has only run-time environment.

  Thank you

  -Anand

  I think you missed the validation part. You're going to make after the installation of the application as well as the addition of workspace

  commit;

  Hope that solves your problem.

  Kind regards

  Jitendra

• How can I stop Photoshop CS4 create a new layer each time I use the online tool?

  How can I stop Photoshop CS4 create a new layer each time I use the online tool?

  Whenever I use the online tool, a new layer is created. How can I stop this? No settings have been changed.
  
  Thanks in advance.

  Look at the three options in the top bar.

  

• The file of the bar - descriptor.xml (and make the application of command line)

  I made a game with air and it is online for sale on Android and iOS. It is somewhat popular and I thought to put up on Blackberry for quite awhile now and with the Port of soon-to-start-A-Thon, this seems to be a great time to finally make it.

  BlackBerry is not very common that here where I live in Sweden, however it still looks like an interesting with a potential platform if I want to get the trip. Unfortunately I don't own a camera myself so I'll use the Simulator. With some graphic problems with the simulator when running in mode BB10DevAlpha (icons does not appear right) and the Simulator is very slow when running in mode BB10DevAlphaSafe (chart appears on the right, but it seems that updating them requires more CPU my computer are available).

  The game is built using nothing other than Adobe Flash Professional CS6 and a bunch of command line tools to build the package and sign. I've only got an old computer with Windows XP now since the death of my main PC, all at the time and since the Port-A-Thon is just a few days I do with what I got.

  Firstly I understand that only AIR 3.1 is supported by Blackberry 10, so I use the old AIR SDK 3.1 to create a SWF (flash) file.

  What I really need to do should be used in the exported SWF file of the game, then use the command line tools provided by RIM to build the package, right?

  Except that I did not count on bar - descriptor.xml to be so difficult to understand.

  I was brought to the documentation here: https://developer.blackberry.com/air/documentation/bb10/bar-descriptor_config_file.html

  It says Adobe AIR at the top, the platform selected is Blackberry 10 and the title says "bar-descriptor configuration file", so it must be in the right place!

  I start by trying the 'bar-descriptor configuration example file"on this page:

  ===========================================================

  
  
    
        None
        fake
    
   
    
     Name of the author
   
    
     gXXXxXXx ##XxXxXxxxXxXX #xxx
   
    
     Core.Games
   
    
     Icon.PNG
   
    
     HelloWorld - splash.png
   
    
     read_geolocation
     use_camera
   
    
     1
  

  ===========================================================

  Of course during the test I replaced a few things in the example above with the correct filenames for images etc, I just copied the example of right - off this time to you guys show what I mean.

  Firstly, I extract "blackberry-tablets-sdk - 3.0.0" in a folder on the disc, then I make sure as a full path to the "bin" in the SDK folder inside the path on the OS environment variable.

  Then I read on "Applications of Test using the command line": https://developer.blackberry.com/air/documentation/bb10/testing_your_application_cmd_ms_2010851_11.h...

  Now I run:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf myappnameicon86.png bg splashscreen1024.png - device 192.168.8.128

  Note that "bg" is a folder with 500 images that must be accessible from the app. I hope that I can just add the folder like this and not type a path to each image file...

  What I get (in lib\adt.jar via the bat file):

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Okay, so the example did not straight on the box.

  Now, I've read all paragraphs in the first URL I linked above ("the bar-descriptor configuration file"). I start my own XML file and make sure to include everything that is marked as "necessary". That's what I'm left with:

  ===========================================================

  
  
      MyCompany
      
          
          com.mydomain.myappname
          My App name
          3.0.0
          
              splashscreen1024.PNG
          
          1.5.0
      
      run_native
      
          application
          
              bb.action.VIEW
              application/octet-stream
          
      
  

  ===========================================================

  I have no idea of what concerns the block whole call target, but it took, so he must be there.

  Now I launch (notice that myappnameicon86.png is gone since no icon is mentioned in the above XML code, it is not mandatory):

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf bg splashscreen1024.png - device 192.168.8.128

  Yet once, I get:

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Frustrated I get autour on the forums for answers, because the official documentation is nowhere getting me.

  I'm left with this:

  ===========================================================

  
  http://ns.Adobe.com/air/application/3.1">
      com.mydomain.myappname
      1.5.0
      
      My App name
      
      My App name
      
      
          myappname.swf
          standard
          fake
          true
          true
          landscape
          GPU
          fake
      
      
          myappnameicon36.PNG
          myappnameicon48.PNG
          myappnameicon72.PNG
      
      fake
      fake
      
          qnx.fuse.ui.skins.QNXDevice
          qnx.fuse.ui.skins.QNXNetwork
          qnx.fuse.ui.skins.QNXSensors
          qnx.fuse.ui.skins.QNXSkins
      
  

  ===========================================================

  Looks like the XML code that I use when I build for Android.

  First of all it doesn't have the tag root of qnx, but also nothing of the icons are of the required size (86 x 86). The tag required splashscreens and invoke target is also absent, to name a few. No idea of what the entire block of 'extensions' really do.

  Surely, this does not work:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf QNXDevice.ane QNXNetwork.ane QNXSensors.ane QNXSkins.ane myappnameicon36.png myappnameicon48.png myappnameicon72.png bg-device 192.168.8.128

  Success in building the package BAR to my infinite surprise!

  He even managed to install on the Simulator. An icon for the game. However when it auto-couru the app went into landscape, thought for a second and then crashed (or you leave?) without a message.

  Perhaps because the required qnx tag was missing in the XML?
  Perhaps because images in the bg file could not be loaded?
  Perhaps because he had no permission to keep screen from dimming?

  I have no idea. I tried to add XML to qnx at the address previous to the bar - descriptor.xml, I thought that maybe he needed both the qnx block for when you run the application and the application block for when packaging. But now, he has complained of something like XML is not not clean ("' fatal error: markup in the document following the root element must be well-formed." ").

  So he came to it, I have to ask for help if I ever make the deadline of the Port-A-Thon.

  (1) how am I supposed to write the bar - descriptor.xml?
  (2) what command line starting by "blackberry - airpackager.bat" is OK to use?
  (3) all I have to do is build the SWF using Adobe Flash Professional CS6 and then pack it using the Blackberry SDK, right?

  First of all, there are two xml files that you need.

  One is called the manifesto, is to AIR and is called yourappname- app.xml. It is identical to the ones you use for Android and IOS, though some elements will be ignored. It's one you need to switch on the command line, and is probably causing the 'Namespace' missing error message. A file manifest a minimum is:

  
  http://ns.adobe.com/air/application/3.1">
  
      com.example.appname
      My Fabulous Game
      1.0.0
  
      FileNameOfYourSwfWithoutExtension
      YourCompanyName
      
          [This value will be overwritten by Flash Builder in the output app.xml]
          true
          false
          none
          cpu
          false
      
  
  

  Replace the text in red with your own stuff.

  The second xml file is called to the bar of descriptor. It is for App World and the installation process and is called bar - descriptor.xml. It contains information about signing code, icon, permissions etc. A simple bar - descriptor.xml is:

  
  
     
        none
        true
        landscape
        false
        cpu
     
  
     
     your-name-on-certificate
     your-id-on-certificate
  
     core.games
  
     
     1
  
     
     
        icon86x86.png
     
     splash-landscape.png
  
     
     2.1.0.1314
  
     
     access_shared
     access_internet
     play_audio
     set_audio_volume
  
  

  Make sure that you at least change the red dots.

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.

• Read in the name of the file + path using command line arguments

  Hi guys,.
  I'm trying to use command line arguments to read two file names. The code below works as long as the files are on the class path.
  

  public class cmdLineArguments {
       
       public static void main(String[] args) {
            String xmlFile1 = args[0];
                  String xmlFile2 = args[1];
                 
            System.out.println ("\nXmlFile1: " + args[0] + "\nXmlFile2: " + args[1]);
       }
  }

  I would like to be able to read files that are not on the classpath as well by entering the full path as well as their names.
  In other words, it works if I type:

  C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs file1.xml file2.xml

  but not if I type:

  C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xml

  What would someone please explain how I can modify the code to make it work? I guess I could take both a string, change them manually (add a------it etc.), but y at - it an easier way to do it? Even a reference to a tutorial, article etc. on this matter would be much appreciated.
  
  In addition, no idea why compile, execute code fine in Eclipse but would create an error in command line?
  
  Thank you very much.

  You must learn more about cmd.exe that is used to process the command line. The arguments passed to any program is the command line separated at whitespace so your command line arguments of

  c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xml
  

  turns into a table of

  "c:\Documents", "and", "Settings\user\desktop\file1.xml", "c:\Documents", "and", "Settings\user\desktop\file2.xml"
  

  In other words, instead of 2 arguments you actually have 6.

  To bypass this file names must be enclosed in quotes

  java cmdLineArgs "c:\Documents and Settings\user\desktop\file1.xml" "c:\Documents and Settings\user\desktop\file2.xml"
  

• Everytime I turn on my Mac Java says he needs to install the message says "to use the line tool java command, you must install a JDK.  Click on "more information visit the java developer kit download site."  I followed all these steps and downloSoftware.

  The message says "to use the line tool java command, you must install a JDK.  Click on "more information visit the java developer kit download site."  I followed all these steps and downloaded the correct software update, but still getting the message.

  A

  If you have installed the plugin of Facebook video appeal and you no longer want to use it, you can remove it as follows.

  1 back up all data.

  2. open the library folder in your home folder by holding down the option key and selecting

  Go ▹ library

  in the Finder menu bar.

  3. place these items in the library folder to the Trash:

  LaunchAgents/com.facebook.videochat.name.plist

  Support/Facebook app

  Here the name represents the name of your Facebook.

  4 log off or restart the computer, and then empty the trash.

  B

  If you do not use this plugin, or any other software (for example, some Adobe products), which depends on Java, install the Java runtime distributed by Apple.

  C

  If you do not have the Facebook plugin and you don't want to install Java, please ask for further instructions.

• Open the CD compartment by using command line on Windows7?

  Hello world

  Today, I try to open a cd tray in different methods.  I open more than 4 ways successfully. But I don't know how to open a drawer of CD using command-line in windows 7? Can anyone help to success on the fifth plea.

  Any help will be greatly appreciated.

  Hello world

  Today, I try to open a cd tray in different methods.  I open more than 4 ways successfully. But I don't know how to open a drawer of CD using command-line in windows 7? Can anyone help to success on the fifth plea.

  Any help will be greatly appreciated.

  Hello

  There is no command to operate the drawer in the Windows command prompt.

  You can add a small command-line utility called Nircmd.exe that will allow you to do this, and more to use many cool commands more.

  Go to the following site.

  NirCmd v2.75:

  http://www.NirSoft.NET/utils/NirCmd.html

  Download the utility. Unzip the file and copy the Nircmd.exe file in the C:\Windows\System32 folder.

  (If you use the 64-bit Windows version, also copy the file in the SysWOW64 folder so that it also works with the 32-bit command prompt)

  After that, open the command prompt and type the following command.

  Nircmd.exe cdrom open D:

  (Where D: is the CD-ROM drive)

  See the NirCmd.chm help file for all orders in option.

  Concerning

• Stop the virtual machine of comments using command line on esx 3.5

  does anyone know to stop the virtual computer prompt using command-line on ESX 3.5

  Take a look at this thread for instructions in detail: http://communities.vmware.com//message/1219151#1219151

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• Adding users to a group of construction using the command line tool

  Hello
  Please forgive me if this is in the wrong category/forum, I can't seem to find one for Oracle Portal. I wonder if someone could help me with this issue please?
  
  I am trying to automate the adding users to a group of portal, entries already exist for users in the OID.
  With the help of the following ldapmodify command:
  
  ldapmodify h myhost.company.com Pei 389 - D cn = sleep w f /home/modify.ldif password
  
  where /home/modify.ldif has the following entries:-
  
  DN: cn = User1, cn = Users, dc is company, dc = com
  ChangeType: modify
  Add: orcldefaultprofilegroup
  orcldefaultprofilegroup: cn = groupname, cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  
  DN: cn = User2, cn = Users, dc is company, dc = com
  ChangeType: modify
  Add: orcldefaultprofilegroup
  orcldefaultprofilegroup: cn = groupname, cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  
  The ldapmodify script puts the specified group in the field "Default group" of the 'Edit portal user profile' page in the portal, which is fine. However it is not in fact add the user to the group. When I check the list of the members of the users group are not listed. Also the group is not listed under the existing users group membership "in the"Edit user"page. Also, when I try to connect to the portal as users, I get the error message "you are not authorized to perform this operation. (WWC-44131) "
  
  How can I add users to a group membership by using the command line tool?
  
  Thank you.
  
  M

  Your LDIF file must change the group entry and no input from the user.

  something like

  DN: cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  ChangeType: modify
  Add: uniqueMember
  uniqueMember: cn = User1, cn = Users, dc is company, dc = com

• Develop an application from command line using LabVIEW

  Hello

  Is it possible to generate an executable command line (CLI) uses LabVIEW? This CLI exe is called with some arguments in command line by another application (written in Visual Basic). The LabVIEW run-time engine can be installed separately on the host PC.

  Thanks for your help

  Siddharth

  The only way I found is to create command-line 'wrapper', where the DLL based on LabVIEW is called. So you can not only pass parameters to the command line application, but also the return values of CLI app.

  Check this thread: tool command line that returns a value

  Andrey.

• The application's command line arguments get the path to the file in windows Explorer

  Hello

  I am trying to open a file with my labview application .exe, so I thought that windows was sending the file path double clicked in Explorer solutions in the form of argument, but all I get is the name of my exe file.

  

  Does anyone know how to set up windows or the application to get the double click path from the Explorer, which has the file extension has already been associated with my exe?

  Thank you!

  I'm not sure I understand, but I think you want your Labview program to open another file, as a file of perimeter?

  Have three basic choices.

  Hardcode the path with file name in your program http://zone.ni.com/reference/en-XX/help/371361K-01/glang/path_constant/

  Use the file open vi and for the user to select the file to open http://zone.ni.com/reference/en-XX/help/371361J-01/glang/file_dialog/

  Write your program to accept a http://digital.ni.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364 command line argument

• portablize an application from command line

  I want to use vmware to portablize this application
  This application includes:
  1. an exe file
  2.a batch file
  the batch file uses the command line to run the exe file
  How can I portablize this project?
  I made a simple pre and post scan but the vmware does not capture anything on the execution of the batch file, but just the exe file
  My problem is mainly to set up the file "Package.ini.
  Help, please...

  for example, the batch file contains:

  
  the echo of my text

  the entered value 1 =
  Set /P INPUT1 = % = %

  If INPUT1% equ 215%

  a.exe

  the batch file captures the entry and if 215 is entered, it starts a.exe

  Please change the first lines of package.ini as below (do not add to the bottom of the package.ini)

  [a.exe]
  Source=%SystemSystem%\COMMAND.com
  CommandLine=%SystemSystem%\COMMAND.COM/c h.bat
  ReadOnlyData = Package.ro.tvr
  Project WorkingDirectory=%drive_C%\My

  Make sure that the h.bat file is available under %drive_C%\My project folder.

  If this isn't the case, copy the file manually and rebuild the package.

• I need to increase the memory available to an application from command line (DOS window)

  At the cmd prompt, I perform the mem command and get the following. I have 3gig of ram but the mem says I have 0 contiguous extended memory available? Is there a way to access this memeory?

  memory 655360 bytes total conventional
  655360 bytes available in MS-DOS mode
  578240 largest executable program size

  1048576 bytes total contiguous extended memory
  0 bytes available contiguous extended memory
  941056 bytes available XMS memory
  MS-DOS resident in high memory area

  This solution does not work, thanks for the reply but. I found that Vista locks going to the Command.pif running cmd from Windows users, so even if you terminate the process cmd it active again. I also found a mistake in one of the sons were he mentions emm396.exe as a way to check the emm on Vista memory. My Home Premium installation isn't emm386.exe.

  Anyway once again don't thanks for the help no wonder that many stores do not use Vista. There are a number of development tools that run from command line.