Creating a message box on an action dependant

Similar Questions

• Problem to display information in a message box

  Hi - I create a deployment script that creates a PSobject to display a summary of configuration changes I'm about to do to a host, as well as a YES / NO box to choose whether to continue with the configuration. The question I have is to get the PSObject information to correctly display correctly in the message box.  I can display ok in the console, but not in the message box.  I attach a doc with the release of the console box and message, I would like to the messagebox, output look the same as the way in which its displayed in the console.

  Code to create the PSObject...

  $hostname = $_.esxihost

  $dvswitch = $_.dvswitchname

  $pg_vmotion_1 = $_ .vmotion_pg_1

  $pg_vmotion_2 = $_ .vmotion_pg_2

  $pg_nfs_a = $_ .nfs_pg_A

  $pg_nfs_b = $_ .nfs_pg_B

  $vmk_vmotion_IP1 = $_. IP1_vmk_vmotion

  $vmk_vmotion_IP2 = $_. IP2_vmk_vmotion

  $vmk_vmotion_SM = $_. SM_vmk_vmotion

  $vmk_ipstorage_IP_VLAN128 = $_. VLAN128_vmk_ipstorage_IP

  $vmk_ipstorage_IP_VLAN129 = $_. VLAN129_vmk_ipstorage_IP

  $vmk_ipstorage_SM = $_. SM_vmk_ipstorage_IP

  $object = new-Object - Typename PSObject

  $object | Add-Member-MemberType NoteProperty - name ESXHostname - value $Hostname

  $object | Add-Member-MemberType NoteProperty - name DV_SwitchName - value $dvswitch

  $object | Add-Member-MemberType NoteProperty - name PG_1_VMotion - value $pg_vmotion_1

  $object | Add-Member-MemberType NoteProperty - name PG_2_VMotion - value $pg_vmotion_2

  $object | Add-Member-MemberType NoteProperty - name PG_NFS_A - value $pg_nfs_a

  $object | Add-Member-MemberType NoteProperty - name PG_NFS_B - value $pg_nfs_b

  $object | Add-Member-MemberType NoteProperty - name VMot_1_IP - value $vmk_vmotion_IP1

  $object | Add-Member-MemberType NoteProperty - name VMot_2_IP - value $vmk_vmotion_IP2

  $object | Add-Member-MemberType NoteProperty - name VMot_SM_IP - value $vmk_vmotion_SM

  $object | Add-Member-MemberType NoteProperty - name NFS_VLAN128_IP - value $vmk_ipstorage_IP_VLAN128

  $object | Add-Member-MemberType NoteProperty - name NFS_VLAN129_IP - value $vmk_ipstorage_IP_VLAN129

  $object | Add-Member-MemberType NoteProperty - name NFS_SM - value $vmk_ipstorage_SM

  write-output $object

  Code to create the message box...

  $title = "Please verify information."

  $message = ' is the correct information for $hostname?  Do you want to continue? « ;

  $yes = New-Object System.Management.Automation.Host.ChoiceDescription "& Yes", "the information above is correct.

  $no = New-Object System.Management.Automation.Host.ChoiceDescription 'and not', 'Information above is NOT correct.

  $options = [System.Management.Automation.Host.ChoiceDescription []] ($yes, $no)

  $result = $host.ui.PromptForChoice ($title, $message, $options, 0)

  Please see the attached document for the 2 different types of output - 1 correct, incorrect 1...

  Thanks in advance

  The two results are created by different parties.

  When you view $object on the console, it is the release of PowerShell trainer, who knows the objects, product display.

  The 2nd exit, which is missing from the code you gave, but I guess that the $object added you to the $message variable, is produced by the same PowerShell component that manages the output of Write-Host.

  In this case the object is not interpreted, but as it is dumped.

  

  You can force this 1st output by converting this specific output in [channel].

  Something like that

  .

  $obj = new-Object-property PSObject @ {}

  Field1 = 'abc '.

  Field2 = "xyz".

  Field3 = 'xyz '.

  Field4 = 'xyz '.

  Sphere5 = "xyz".

  Case Field6 = "xyz".

  }

  $title = 'Please check the information '.

  $message = "is correct for information?  Do you want to continue? ' r $($obj |) (Out-String) ".

  $yes = New-Object System.Management.Automation.Host.ChoiceDescription "& Yes", "the information above is correct.

  $no = New-Object System.Management.Automation.Host.ChoiceDescription '& no.","Information above is NOT correct.

  $options = [System.Management.Automation.Host.ChoiceDescription []] ($yes, $no)

  $result = $host.ui.PromptForChoice ($title, $message, $options, 0)

  This will give

  

• When I try to create a new e-mail in Windows Mail for Vista, the message box is delayed and slow to open.

  Hello, I have a laptop with Vista MS operating system and Windows Mail.  Since I got the computer, I noticed that when I go to create a new email, the new message box is delayed and slow to open.  And, often, once that I enter a contact in the line 'To', it also seems to be slow in filling.  No idea why this is happening.  The old OE always worked smoothly.  Thank you.

  original title: Windows Vista and Windows Mail

  Contacts are managed differently in Winmail in Vista and many can be what slows down things.  You can try to reduce them, and see if that has an effect any.

  See here for background information (www.oehelp.com/backup.aspx#wm), although it seems that the link to contacts has been removed.  See here for information on contacts: http://windows.microsoft.com/en-US/windows-vista/Managing-your-contacts

  Steve

• Message box in function that returns a list deletes the created list... (Dialog box)

  Hello

  I work with a complex dialogue, its purpose is to manage a section in the PDF file.

  I use a "mclv" object in the dialog box to represent data entries in the PDF file in order to manage the result in another section.

  I created a function that creates the list based on a previous section in the PDF object, the function works perfectly well.

  But I have a small question, the function used to create the list of the dialog box object performs a check with the former front list created, as appropriate,

  and if in any case it is different from the old list, I need to warn the user that the list has changed and if there were any changes applied to the result it will be returned to zero and must be recreated.

  But when the poping that message box, all lists are deleted and nothing is displayed in the objects 'mclv.

  If I remove the message box, the lists are all very well...

  Is there anyone who have come across something like this before? If so, any solution to this problem?

  I asked my question a bit too quickly, I already found a work around

  But I still don't understand why he behaves like that tho...

  I just thought how to work around this problem.

  If anyone has encountered this problem can use this solution:

  Instead of having the message inside the function to return box, I declared a global Boolean variable to the Script object

  If the message box must be displayed, the Boolean value is set to True

  Once in the initialize event of the dialog box, if the value Boolean true I call the message box and reset the value Boolean false

• Message Box scripts

  Hello

  I am new to scripting and am hitting a wall. Hoping someone can point me in the right direction. I have created a form that has a button "+" button, and less. If the user clicks on the button "+", they will add a line to their table. If they click the button "-", they remove a line. I want to have a POP up appear when trying to remove a line that asks them if they are sure they want to delete it. I am able to bring up the message box, but I don't know how to control the actions of the answer they select. If he clicks 'Yes' (they are sure they want to delete the line), I want the line to be deleted. If he clicks on 'No' (they do not want to delete the line), I want the user just returned the form without modification. I have included my script for the button "-" below. Can someone help me with the rest? Thank you very much!

  Form1. GettingSettled.GettingSettled.Table1.Row1.Subform1.Remove::click - (JavaScript, client)

  JavaScript to add a line in a table

  var

  rowNum = this.parent.index + 1;

  this.parent.parent.instanceManager.removeInstance (rowNum);

  ("are xfa.host.messageBox you sure you want to delete this line Are?"

  , "Deleting a line" , 1 , 2);

  Try the following if block on the "click event" of "form1. GettingSettled.GettingSettled.Table1.Row1.Subform1.Remove button.

  If (xfa.host.messageBox ("' are you sure want to remove this line?", "deleting a line", 2, 2) == '4') {}

  In the above line: 4 = Yes and 3 = No

  Insert here the Code to delete line

  }

  For more details, please consult the help of Adobe: http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm?content=001368.html

• I created a message to multiple recipients, but now I want to delete * all * of them - how?

  This seems to be a common problem, but I can't find a quick way to do (38.4 TBird on 10 to win).

  I create a message and add many recipients. After a few changes, I realize I want to only one recipient. How can I remove all the recipients of the message, rather than delete them one after another after another?

  Here's a slightly different version of the question - I create a new message to multiple recipients, but later I realize I need to do the BCC recipients, then addresses do not appear in each message. I can't find a way to change them all at once, I can change only one at a time. I would be happy to all delete them and add names such as BCC, but see my first question! Thank you, I wonder if I am missing a simple technique.

  question 1: the address close button add-on offers a close or delete X in each box of the address. Not quite all-at-once, but easier than the selection and removal of addresses.

  2nd question: the use of the Bcc instead Add on is adjustable and you harass, or page on Bcc automatically, and it offers in bulk to Cc/BCC/switching.

• Message box

  Hello

  I hope someone can give me a hand with this...

  I created an array of offset, where each position of the table corresponds to the offset for a channel. I have another array containing the names of channels.

  Now I want a pop window mentioning the name of the channel on the left and his shift on the right (there are 36 shifts) so the user can check them.

  So far, that I've created a loop For which opens a message box (using the 'msgboxdisp' function) with a single value in time, 36 times, which to be honest is an extremely poor solution.

  If anyone can suggest something

  Thank you

  Hi Leillo,

  Here is the approach of ambivalent MsgBox.

  For iCount = 1 to 23
  
    StatSel (iCount) = 'no '.
  
  Next
  
  StatSel (6) = 'yes '.
  
  Dim offset (100)' define an array of 100 for the channel offset
  
  Dim a, i, Msg
  
  a = ChnNoMax'Calculates the number of channels
  
  ICount = 1 to a ' loop to calculate the table of offsets
  
    Call StatBlockCalc ("Channel", "1-", iCount)' compute channelwise, 1st row on the last, all channels (iCount represents "all channels.
  
    offset (iCount) = statarithmean ' table of offsets
  
  Next
  
  for i = 1 to a
  
    MSG = Msg & I & vbTAB & offset (i) & + "\n"
  
  Next
  
  Call msgboxdisp (Msg, "MB_OK", "MsgTypeWarning", 3)

  MsgBox items won't be able to show all the 100, but you could filter only issue items / interesting and hide the others uninteresting.  Or you can go the road from SUDialog to pop up to a custom dialog box, you set for a table with 2 columns.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How do you create a message rule in outlook express when the subject line contains symbols

  I get emails when the subject line contains square boxes.  I tried to create a message for when rule the subject contains these square boxes, but cannot do so.

  Any suggestions?

  Thank you.

  Then, it will not work. Unless the messages are always of the same address, or a domain, so the only option I see is of filter in your mail.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Tools | Message rules | Mail | New.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want messages not in the address book to go to deleted items, or you can create a spam folder and direct them here.

  You can choose to delete the server, but be careful because you never have messages downloaded to any folder, if you choose this option.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox. You won't see other emails.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

  Be sure to see these links for more options.

  A few tips:
  http://insideoe.tomsterdam.com/tips/rules.htm

  Control junk e-mail in Outlook Express:
  http://www.Microsoft.com/Windows/IE/community/columns/junkmail.mspx

  Message rules does not? :
  http://www.insideoe.com/FAQs/why.htm#rules

• message box at the same time

  Hello

  I did a demonstration program which is my problem. I want to show these two separate at the same time message boxes, but do not know how...

  I need to make the decision after the two message boxes are displayed. Any idea?

  Thank you

  Jernej

  The Express VI you are using uses the functions of the modal dialog box. Thus, the other cannot be displayed until one is recognized. You will need to create your own dialog boxes that are not modal. There are a few examples with LabVIEW on creating dialog boxes. Also do a search, as questions about the custom dialog box Create boxes has developed several times.

• Whenever I send an email error message box comes up (with no message displayed)

  Whenever I send an email error message box comes up (with no message) and the email is sent to the Outbox, even if the email is actually sent and received by the addressee. Enamel and then continually gets sent unless I have delete the email from the Outbox file. Anyone know why this is happening and what can be done to remedy this? It's frustrating because I don't get a copy of the email in my file sent as back up.

  CrystalBall told you use Outlook Express. Fix? You have corruption of dbx files.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• «Login process failed create the dialog box options security.»

  On a Vista desktop, startup takes up to 2 hours to display the desktop icons. After that the icons appear Finally, none will run. The error message before full boot, I get up, it's "" logon process failed create the dialog box options security. " I tried a clean boot, boot without failure, even booting with a boot disk and try to do a restore. All I get is "no restoration is available on this computer." Once he finally starts, I can run regedit, but not the Task Manager or any other executable. Finally had to reformat and reload, but would like an answer for this strange behavior.

  Hello

  You could deal with the issue because of some third-party security patches on the computer. Most of the time, it will be a virus on the connection process attack. She would not allow the user profile of all loading as well as the security settings of the created user profile.

  Reference:

  10 ways to fix your PC

  http://Windows.Microsoft.com/en-us/Windows/explore/10-ways-to-tune-up-your-PC

• Listener e-mail about all message boxes

  Hi all

  I tried to implement (what I thought was) a receiver of simple messages. I have the code in its own class that implements FolderListener, according to which everything he needs to do is to recover messages sent to any of the message boxes that the device has. After that, it will check certain properties of the message, but I'm stuck at the real listener/detection part.

  Using the BB code has tried to extract "INBOX" of type "Folder" and by adding the listener to this, but since entered an approach more high level that performs this action throughout the store:

  class MailListener extends MainManager implements FolderListener {
    Message _newMessage;
    String _cipherText;
  
    MailListener() {
      Session.getDefaultInstance().getStore().addFolderListener(this);
    }
  
    public void messagesAdded(FolderEvent event) {
      _newMessage = event.getMessage();
  
      UiApplication.getUiApplication().invokeLater(new Runnable() {
          public void run() {
            Dialog.alert("Got an email");
          }
      });
    }
  }
  

  However, on receipt of an email, the message "to receive an email' fails to display - makes me think of the earpiece does not work properly, as the call of Dialog.alert works well if it is placed in the constructor.

  Can you see where I am going wrong?

  Thank you!

  Will be

  Here's a slightly more updated version of the article you found:

  http://supportforums.BlackBerry.com/T5/Java-development/global-events-and-global-event-listeners/TA-...

  The approach to the use of a Global event and FolderListener is the recommended approach for this kind of requirement.  Recommended, because it is safe, made the appropriate context for you and isolates the treatment of electronic mail (which exists in the earpiece of your file) from your code.

  There are other means, less fresh generals and/or coding of requirement, but there is no safer way.

  As an example of another way, you might have shared in RuntimeStore storage space.  You could have a treatment of your Application that expects data to be included in the RuntimeStore collection.  Then the listener needs to do is pop the data in the RuntimeStore - your Application running in its own context, will pick up these data and can treat it as he likes.

  By the way the reference will not work, because you always have the problem of running your code in another context.

  I tried to explain the basics of Applications and their context (or address spaces, or whatever you want to call them), in this post.

  http://supportforums.BlackBerry.com/T5/Java-development/ControlledAccess-exception-for-persistent-St...

• Install BlackBerry preprocessing support message box, guard reboot

  Hello

  Whenever I started a new project of BlackBerry, and created the first file, I got a message box with a title in the title of the subject and the message: "BlackBerry preprocessor is configured. Eclipse will restart to take effect and re - build the workspace. «,

  Eclipse then reboot and after reboot message box show again and restart, keeping the foreaver reboot!

  I got this package full of BlackBerry's official website as: BlackBerry_JDE_PluginFull_1.1.2.201003212304 - 12.exe

  versions:

  Eclipse: Build id: 20090619-0625

  net.rim.EclipseJDE_1.1.2.201003212304 - 12

  NET.RIM.ejde.Feature.componentpack5.0.0_5.0.0.25

  Thank you all,

  I found a solution, in the eclipse.ini replace this:

  -Dosgi.framework.extensions = org.eclipse.mtj.core.hooks

  TO:

  -Dosgi.framework.extensions = org.eclipse.mtj.core.hooks, net.rim.ejde

• How can I create a text box

  How can I create a text box? Canany body help me create a text box? I need examples of code for the creation of the text box.

  Thanks and regads: -.

  Jitendra.Balla

  Take a look at this example.

  http://NA.BlackBerry.com/eng/devjournals/resources/journals/jul_2005/creating_textbox_field.jsp

  Also check this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=41759&query.ID=23...

  Concerning

  Bika

• Need to form pre filled out of Muse Message box

  I have a form on a site and its supposed to be a letter, I need the message to pre box then fill just put in their info and press send. Thus, when mail is received the pre wrote message is there?

  Currently in Adobe Muse, contact forms are for the customer to send you a message with. Contact forms in Muse is not tell pre-written a friend of the e-mail forms that allow the user to send a message to other people.

  However, if you want your users to send a pre-written message, which is easy to do!

  1. create a form in Adobe Muse and make it look as you wish. Make sure you have a message box for the message that is pre-populated.

  

  2. turn off the message of any text box. Let's add the pre-written message in manually.

  

  3. export the site in HTML and open the generated "index.html". Find the section of the code for the form. You can find the form easily by using the find command by typing "shape". Search for it

  Tags

  

  4 locate the section of code that contains the message box you want with the pre-written message. If you have a header for the box, which makes it easier to find!

  

  5. finding the and type your message pre-written between the tags.<p class="reply"> <p class="reply"><a href="https://forums.adobe.com/servlet/JiveServlet/showImage/2-8893042-985955/Untitled20160721174119.png" rel="external nofollow noreferrer"><img src="https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-8893042-985955/900-80/Untitled20160721174119.png"></a></p> <p class="reply">6. Save "index.html" and upload it to your server. The form will now have a pre-written message when it is sent.</p> <p class="reply"><a href="https://forums.adobe.com/servlet/JiveServlet/showImage/2-8893042-985956/Untitled20160721174305.png" rel="external nofollow noreferrer"><img src="https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-8893042-985956/256-267/Untitled20160721174305.png"></a><a href="https://forums.adobe.com/servlet/JiveServlet/showImage/2-8893042-985957/Untitled20160721174443.png" rel="external nofollow noreferrer"><img src="https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-8893042-985957/626-152/Untitled20160721174443.png"></a></p> <p class="reply">The only reason to do this or why it would make sense is if you want to prepopulate a message/error message model to make it easier for users to submit useful information. What is great about this hack is that it allows the user to change the message that is preecrites. For this reason, this hack has made a lot of sense!</p> <p class="reply">I hope this has helped!</p>