creating a type of custom search UDF

Similar Questions

• Creating a type of stage of the "Launcher" which would insert the appropriate step type predefined or custom time edition

  Hello world

  I'm looking for tips, pointers, directions... to be able to perform this operation in TS 4.0 sequence Editor, if it is still possible...

  I am managing a test system with an abstraction of virtual instruments 'home-made' additional layer to IVI classes for instruments that have no defined classes, customization of the sequence editor accordingly for the developers of my Department.

  So basically, when the instrument is IVI, the developer uses the built-in type of stage IIA type and when it is not the case, it uses the types of custom step I developed for this particular category of instruments.

  However there are classes where I both IVI and available specific drivers and I have to use both in the test sequence.

  For example, let's say there are two DC power sources available in the test bench, including a programmable IVI compatible DC power and the other composed of 'blocks' fixed to DC power relay-driven external and you will need to use both in the test sequence.

  I want to be able to do in the sequence editor is the insertion of appropriate during the editing just level type by selecting the power source (by a ring or an enum for example) and if the first resource is selected, it inserts the type of stage IIA, and if the second resource is selected, it inserts the appropriate custom step type.

  Any ideas on how to achieve this?

  Kind regards

  Cyril

  I don't know exactly when you plan this next prompt, but one option is to create a personalized with a custom step step type named OnNewStep. It will be called when your approach is inserted in the sequence. You can then display the command prompt and replace program step custom in the sequence step type based on the selection of the appropriate user.

• How to create a type for an enumeration definition

  Sorry for this question of newbe, but I'm working on cleaning up my Act by using types of producer/consumer for event driven state machines.  To do this, it is convenient to create a type definition for the control of the enumeration that defines the possible States of the loop of the consumer.  I don't understand all of the discussion in the books I read.  I just placed an enumeration of control on the front and edited the State names, using them to define the queue for the loop of the consumer.  However, when I use the other functions of the queue and create a constant for the State to put it on the queue, a constant gets shot at the time of its creation.  If the list of States is modified, the item queue using the defined constant previously shows a symbol of constraint (red dot) and the constant does contain not the new State potential... is what the type definition is to propagate this definition to the constants so that they keep up with additions to the list of enumeration...?

  I've been playing with a short example to see how it works.  If someone could help me with something of definition, I would appretiate it.

  Thank you

  Hummer1

  Hi Hummer1,

  Follow these steps:

  1. under the 'file' menu, select 'new '.... »

  2. a dialog box will appear.  Select "custom control" and click "ok".

  3. a new façade will pop up, called "control1.ctl".  Put your constant listed on this new façade.  Add all your statements for your state machine, the way that you did.

  4. under the menu on your new custom control, you will see a field called 'control '.  Click on it and choose 'type definition' (or 'type strict definition').

  5. save your new control custom as "states.ctl" or "enum.ctl" or any name strikes your fancy.

  Now, go back to your main VI.  In the palette "orders", click on "select control".   Choose the typedef, that you just created.  Put it on the front panel.  Right-click on it and select "search terminal.  Your block diagram will jump upward and terminal control will be highlights.  Right-click on it and select "change constant.  Now, you can wire this constant in your queue.  Do the same for any other subVIs that use the same queue, so that they you are referencing the typedef.

  When you want to make changes to your control, open it in the same way you would open a VI and make the changes.  Then, under the "file" menu, select "apply changes".  Changes will propagate through all your screws

  I have attached a small example of a typedef for you.

  Diane

• types of custom form entries

  I created a button link "back" as follows:

  «< form > < input type = "button" value = "& lt;-RETURN «onclick ="history.go(-1)»; return false; "/ > < / make >

  But I'd like to use a graph custom instead of the default one. Types of custom form entries Googling didn't reveal anything, how can I do this?

  http://www.Google.com/search?q=input+type=%22button%22+image

  OR

  

• Custom searches not synchronized: is there a way to do it?

  Here's my problem.
  I go to a website that offers a search engine: a site of translation (http://www.garzantilinguistica.it)
  I right-click on the text box to perform a search, then choose "add a keyword for this search...". ': Firefox asks me to save a bookmark and select a keyword to search using this "search engine".
  I then save this bookmark with the keyword "gli.
  Now, if I type 'gli myword' in the address bar, this site opens with the results searching for «myword» Large.

  However, now I have another instance of Firefox on another PC. The two instances are synchronized. After syncing, I find the bookmark to search garzantilinguistica.it on the second PC URL, too, and this bookmark has the keyword defined gli.
  However, if I try to enter 'gli myword' in the address bar of the second PC, Firefox doesn't make a search with garzantilinguistica.it for 'myword', but looking rather "gli myword" on Google.
  If I try to repeat the steps that I did on the first PC, Firefox asks me to add the garzantilinguistica.it search URL as a bookmark for the second time (which is not desirable, because it is already there, coming from the synchronization).

  So, is there a way to also synchronize the information in customized searches in all instances of Firefox synched?

  Hello

  Unfortunately this feature is not included in Firefox at this point, but you can suggest it by following the instructions below.

  The people who answer questions here are for the most part, other users Firefox dedicating volunteer their time (like me), not employees of Mozilla or Firefox developers.

  If you want to leave a comment for the developers of Firefox, you can go to the Firefox help menu and select submit comments... or use this link. (You will need to be on the latest version of Firefox to submit comments). Your comments gets collected at http://input.mozilla.org/, where a team of people read it and collect data on the most common questions.

  I hope this helps!

  Curtis

• How can I delete google custom search bar of about: newtab page

  When I open Firefox or a new tab I updated: newtab which is great and all. Recently, I noticed a Google search bar on the new tab page, however, it immediately affect my cursor. I type in the address normal upstairs bar. If I do not do that tedious extra step click on the address bar before typing, it opens on Google Custom Search Engine. Has no images, maps, etc. the tabs along the top. Make a simple task to find something or other but just that much more boring to do, because I have to type in the address in bar.

  So I was hoping there is a way to remove this search bar Google annoying custom of my remarks: newtab?
  Or at least get my cursor in the address bar, not the bar Google Custom Search.

  This is a screen-cap of the search bar. http://gyazo.com/d75ccdea9b9d0bb4a3d347664be73771

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • ADWCleaner
  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Type of custom log MultiNumericLimit step

  Hi, I have developed a library using certain types of custom step. I created the type of step from the numerical limit Test Multiple standarda. In run mode the step sequence context GET and using the API of Teststand crash parameters such as:

  Step.Result.Measurement []. Data
  Step.Result.Measurement []. Limits.High
  Step.Result.Measurement []. Limits.Low

  .....

  What I can not change at run time is the name of the measure, because it depends on the line that I selected in the step type. I would change the Step.Result.Measurement [XXX]. State with Step.Result.Measurement [YYY]. Status at run time.

  I havo also another question, but it's a little more complicated to explain. The step type also has an editor that the user may open in the teststand sequence editor. In this editor, the user can select what action to take. When the user finishes the configuration press 'save' on the step step type editor should fill the pameters of the MultiNumeric limit test. Exactly the same thing when the user sets up the test from the tab in the teststand sequence editor (attached). But I can't do it.

  Thank you very much.

  Hi Logatto

  You wrote:... In this case I'm not the SequenceContext because TestStand is not running.

  You will have a SequnceContext. This is the current context of your sequence, you are editing.

  So just enter "ThisContext" Edit-in-step of your step-Type in vi.

  Now you should be able to access the Step property and make your orders.

  Please visit and note this idea for perfomance TS-User: http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/Ability-to-create-user-built-in-StepTypes/idi-p/1...

  Concerning

  Jürgen

• Add search criteria to the customer Search Page

  Hi all

  I have a requirement to add additioinal search criteria to the customer search page. Order Management Super User-> client-> Standard

  / Oracle/Apps/AR/cusstd/srch/WebUI/ArPrtySrchPG

  
  

  I want to add number of Site Search additiional. I tried to add a lookup field using customization, but the addition of the field does not appear on the screen. I tried to find out how the where clause is implemented through the related CO I found that the search fields are implemented using a matching HZ_ORG_SIMPLE_SEARCH_RULE rule.

  
  

  Is it possible to add the additional field matching this rule? Otherwise how can I advance to this requirement? Please suggest

  
  

  
  

  Thank you

  Pravin
  

  Found the solution...  Adding that it might be useful for others...

  Steps to follow:

  1. create the custom match rule by copying standard.

  2. add additional fields to the matching rule and specify a transform.

  3 compile the custom matching rule

  Finally, update the profile option to point to the custom matching rule. In my case it was HZ: associate the rule for the Simple and HZ research organization: associate the rule of advanced search for organisation

  Thank you

  Pravin

• Reviews of custom search based on the trigger of profile value!

  Hello

  I have the following requirement on the custom in UCM10g view...

  -> I'd like to create a view of the personalized search for the user. In this view, I want to the result fields should be displayed based on the profile trigger value.

  For example,.

  If the profile trigger value is instrument so I want A, B, C of fields to display.

  If the profile trigger value is triggerB then I want to E, F fields to be displayed on the custom view of search results.

  In the custom view creation page, I could see more advanced option of adding script IDOC but do not know how to set this up.

  Please advise me to go further.

  Thank you

  Hi Prabhu,

  Please find the solution for the above scenario.

  1. create two rules (rule & rule B) with metadata appropriate to display in the search user interface. Provide the custom label for metadata that must appear in the search engine and the search results page.

  2 create two profiles (profile A & B) with each of the rules to create a smooth side of activation condition carte 'listTemplateId' on behalf of name of the customized results page template

  Example:

  listTemplateId = ViewA

  listTemplateId = ViewB

  3. create two custom results page view using the view of the title as a parent (see A & B). Set the fields to display for each with custom label if necessary.

  4 pne_portal.hda of file for the profile of the user needs an addition of two entries of list template customized.

  5. a "customlisttemplates" in the same folder location should be copied to other users which has two files holding the results of research of field definition.

  Now the custom search results page will be called automatically without changing the display.

  Kind regards

  -Anand

• CRMOD custom search

  Hello
  I want to create a customized search to fill a custom field.
  
  I created the custom text field, the custom data report and select link. I also have the web link to call the custom report.
  Now when I click on the web link, the custom report is open in a separate window. but when I click the link select column from the report, that nothing is happening.
  
  Could someone guide me on what to do on click the link select. I want the data to be transmitted to the new custom field and close the second window.
  
  Thanks for your help.

  Hello

  probably you forgot to put the colon ': ' and the space at the beginning of "custom text Format".

  Please try this formula exactly in your report: CONCAT (CONCAT (CONCAT (employee. "" Name ","(§'), employee. (("" Last name ")," § ")

  Concerning

• Creating a field of custom for a new text stamp Dymanic

  I was not able to solve this problem yet, so I'll transfer...

  I create a new dynamic custom stamp, but instead of the time, when inserted, I then have to manually enter the text in the dynamic text field.

  How can I change the script in the dynamic field of the stamp to do this? Here is a sample of what I need: (is the user input section in the boxed area)

  

  I created the image in Word, then creates the pdf file.   Then, in Acrobat, I created a custom stamp, retrieved from the image of pdf has been created from Word, and registered as a custom stamp.  I then opened this file (C:\ < FOLDER USER > \application data\adobe\acrobat\8.0\Stamps...) and also opened a dynamic stamp as well.  I then copied the Date/time dynamic and inserted in my stamp (sending) field and tested on a pdf doc.  My Submittal w stamp / Date field / hour worked.

  So then I reopened my mailing stamp and edited text field properties and changed the custom calculation Script:

  [quote]

  var cResponse = app.response({)
  cQuestion: 'Enter the section number to appear in the stamp.',
  CTitre: 'Section number '.
  cLabel: "item number:"
  });
  If (cResponse is nothing)
  App.Alert ("thanks for trying anyway.");
  on the other
  App.Alert ("you answered, \""+cResponse+"\", for the section number")
  + "question.", 3);

  [/ quote]

  That, once I've stamped a page brought to the top of the dialog box:

  

  but after I entered the data in the dialog box and 'OK' stamp, page has been stamped, but the dynamic text box was empty.

  

  Issues related to the:

  1-      Why was the empty dynamic text box, what don't get me?

  2-      The dialog box that appeared was titled "WARNING JavaScript window - Section number"how get rid of the 'Java Script WARNING' window?  or did I miss type something...

  3-      When you select OK, do we have an another dialog (him ' said it... ("pop up), or can we just have the inserted stamp and then after this dialog Section number?

  Yet once again, I'm not very good at all at this level of the code, so any help is appreciated...

  Thanks in advance

  And the extra character lies on a line.

  Corrected code:

  var cResponse = app.response({)
  cQuestion: 'Enter the section number to appear in the stamp.',
  CTitre: 'Section number '.
  cLabel: "item number:"
  });
  If (cResponse == null) {}
  Event.Value = "* INCORRECT *;

  }

  on the other
  Event.Value = cResponse;

• date in the form of custom search

  Hi all.
  using jdev 11.1.1.3.0.
  Im trying to create the customized search form the table of results.
  
  help pls with implementing "between search" for comparable areas, such as date, whole, etc.
  
  Edited by: user10259409 the 02.09.2010 05:34

  Hello

  use of bind variables in the query and drag and drop the ExecuteWithParams operation as a parameter since the display object node in the data controls panel. Then allows you to set the search within the query

  Frank

• When and how to use - type parameter to 'search' parameter as other types.

  We have recently improved BI Publisher to 10.1.3.4. I saw the new type of parameter "search" in the setting section, when the report was created. What is the use of it? How to use it? like other type parameter text, Menu, Hidden, Date.
  I couldn't find any help or release notes on this!
  
  Thank you
  Ayaps

  Ayaps,

  It's like choosing MENU. For the two you need a LOV. But for the SEARCH, you will get a PopUp LOV with the choice of the search in the list (comparing to the SELECTION LIST, you get to the MENU Type). So SEARCH is more LOVs and MENU for short.

  Concerning
  Rainer

• How to add the custom search engine?

  Hello
  Firefox is a great browser especially for those who care about freedom and privacy. I would like to know why it is not possible to specify the custom search engine that you were able to do in the latest version of Firefox. I want to use the search engine google with https://search.disconnect.me/ which offers the possibility of anonymous research. I know that there is a plugin https://disconnect.me/search, but is not very comfortable with respect to the standard search bar. Thank you

  I read the solution proposed here https://support.mozilla.org/en-US/kb/use-search-bar-firefox-and-manage-search-engines#w_add-a-search-engine but in 36 of Firefox does not work

  TypeError message probably explains why you could not add the page of Mycroft search engine initially.

  When I search this exact error in Google, only that rolled up from July 2013:

  As long as the 'Integration of office of Unity 2.4.6' plugin is enabled I couldn't add to Firefox search engines.
  https://bugs.Launchpad.NET/Ubuntu/+source/unity-Firefox-extension/+bug/1202383

  Note: this option is not a Plugin, this is an Extension and available on the page Add-ons with other extensions.

• Get rid of Google Custom Search

  Address bar and search do "google custom search". It's pretty useless. I can't get rid of it. I want GOOGLE NORMAL. Topic: configuration settings do NOT change this.

  Or just install https://addons.mozilla.org/en-US/firefox/addon/searchreset/ to google your search preferences.