creating groups of VLAN - traffic disruption

Similar Questions

• Groups of VLAN

  I have a disjoint network of L2 and I use VIRTUAL LAN Manager to shape my L2 traffic to the correct evacuation. It works well, but I need to create about 100 VLANS. If you are familiar with the process, you know that this will result in a large number of manual configuration in UCSM.

  I read about groups VLAN, and I think that their use could be a great time saver in my case.

  Can anyone confirm if groups of vlan is a good case use my configuration? If so, what is the best method for the transition of the Manager of vlan to the use of groups.

  Thank you

  Yes of course!

  Groups of VLANS allow you to group VLAN on ports uplink Ethernet, by function or by VLANS that belong to a specific network. You can define the belonging to a VLAN and apply belonging to several Ethernet uplink ports on the interconnection of the fabric.

  You can use the shell to configure the VLAN 100 +.

• How can I create group email addresses, for example a category with this group addresses.

  Just installed Thunderbird and it copied to my places, but lost my group list. I need this facility to the need to send emails from my role as a volunteer group in the Chiltern U3A. I need to create groups of 3 120 names in each group.
  Hope you can help.

  Opens the address book and press the button on the new list. Then follow these instructions.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Create_Mailing_List

• I want to create a sequence of traffic lights in labview

  Hello

  I am very new to Labview (first post here) and am learning by trying simple things.

  I am trying to create a system of traffic lights in continuous operation, RED, THEN RED AND AMBER, and THEN JUST GREEN, THEN JUST AMBER, THEN JUST RED and repeat the sequence.

  I have 3 of the 3 colors LED and at the present time they run, RED, THEN RED AND YELLOW, THEN RED AND ORANGE AND GREEN, THEN ALL OFF, and then repeats the sequence.

  I used a structure of matter within a while loop.  Set a status for each of the colors and the reset (-all).  I think that straight forward.

  Does anyone have advice on how I could add to what I learned to create the aforementioned fire sequence?

  Thank you very much for your time.

  PJ.

  You have passed the exam, so I'll join the VI this time (LV9, let me know if you need an earlier version).  You'd be surprised how many people complain of not be provided code, glad to see that you're a good sport.

  The constant matrix in cluster was created by right-clicking the control and selecting create Constant.  He just let me show a screenshot of the content of the sequence table.

  I added the delay as a small tip to always think a go ahead.  Finally you will be much more forward thinking, but start by looking at the next thing you want to do and try to keep your code flexible enough to cope.

• How can I create groups"in my list of Contacts Windows Live Mail?

  I could easily create "Groups" for e-mailing to multiple receipents in Outlook Express.  Now with Windows Live Mail, it seems impossible.  Is there a way to create "groups" in WLM?  And, if so, why their No. easily accessible way to accomplish?

  Windows Live Mail does not groups, but you can get much the same effect by using the categories. Here are a few comments that should help you: what happened to contact groups? Although they are part of Windows Live Mail 2011, you should be able to adapt to the 2009 version.

• Group AP VLAN

  The installation is in a lab with an East and West campus environment to simulate the two buildings, and everything was working fine until we wanted to use AP group VLAN. Once we have configured the AP group VLAN, updated models AP and pushed out - it broke.

  All of a sudden, all the three wireless LANs (of SSID broadcasting) could not be seen, but all the wireless AP have increased. We rebooted the AP, but nothing has changed. We RESET an AP and once there she controller (via DHCP Option 43), wireless LANs came comes back online for the campus of the EAST... WEST Campus can still be seen. We have rebuilt all aspects of installation from scratch and it still happens.

  Here's my question - if a WLAN is related to the Interface of wide WLAN management but is then bound to another interface in VLAN of the AP group, does the AP group VLAN definition trump the level setting of WLAN (Controller-> WLAN-> WLAN ID-> Interface) OR do the duties of WLAN/Interface must match between the WLAN controller and the settings of the AP group VLAN?

  My thought is that the AP group VLAN - WLAN to configuration Interface replaces the original WLAN controller configuration Interface.

  Here is the configuration:

  WCS 4.2.62.11

  East Campus:

  Cat6506 - 12.2.18 SXF5

  2 x WISN - 12.2.18 SXF5

  Interfaces - East_EAP, East_WEP

  WLAN/SSID-LLeap/lableap, LPeap/labpeap, LWep/labwep

  West Campus:

  Cat6506 - 12.2.18 SXF5

  1 x WISN - 12.2.18 SXF5

  Interfaces - West_EAP

  WLAN/SSID-LLeap/lableap, LPeap/labpeap

  Each campus is on a separate subnet to simulate two different buildings.

  Of all the WISN / controllers have the same virtual Interface and are part of the same group of mobility - we want to wander between the buildings.

  I attach the Leap and Peap WLAN to the same Interface (Eap_East or Eap_West) in each respective campuses and WEP on its own Interface.

  (This is done in the AP group config VLAN - under Comptroller-> WLAN-> WLAN ID all the WLAN by default for the Management Interface)

  I have Setup AP group VLAN for each Campus:

  Lab_East_Group--> LLeap/LPeap related to the East_Eap Interface. LWep related to East_Wep Interface

  Lab_West_Group--> LLeap/LPeap related to West_Eap_Interface (no wep in the West Campus).

  Models of the AP are configured for each Campus specifying primary, secondary, and tertiary controllers, the name of the Group Vlan and WLAN override enabled:

  Model Lab_East AP--> group VLAN - Lab_East_Group, WLAN substitute allows Leap/Peap/Wep WLAN

  AP Lab West model--> group VLAN - Lab_West_Group, WLAN substitute allows Leap/Peap WLAN

  You are right, and what you need to do is to have only these three controllers in a groups of mobility. Unless you all wlc on a single group of mobility. The more stable code I think is 4.1.185. If you decide to go to 4.2 then go with 4.2.112. I have this code running in a couple of my clients.

  I would also upgrade the boot image.

• BlackBerry 10 how to create groups of contacts

  Hello

  I have a blackberry Z10 and I want to creat groups of contacts to send messages to several people at the same time.

  Could you help me please.

  I would like to know also if it is possible to call a person when we are in the application of text messages and whether it is possible to send messages to a contact from the contacts of the application.

  Thank you very much for your help.

  Marie-Annick

  Marie-Annick says:

  I have a blackberry Z10 and I want to creat groups of contacts to send messages to several people at the same time.

  Hello Marie-Annick, characteristic group addresses is currently not available ON the device itself.

  Marie-Annick says:

  I would like to know also if it is possible to call a person when we are in the application of text messages and whether it is possible to send messages to a contact from the contacts of the application.

  In text messages, press the name of the person at the top blue > you're the contact address book entry > tap the number to call.

  The Contacts application with an open contact, touch and hold the number you want to call. You will see entries call XXX or XXX of text.

• What is the preferred means of creating group policies?

  What is the preferred means of creating group policies?

  For example policy of GP1 for wallpaper and GP2 political mapping of drive and printer.

  or to combine politics both GP1 and GP2 in unique group as GPDOMAIN policy.

  Application of associated Win2K8 R2 group policies

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• VRA unable to create groups of companies with the same name in different tenants with vRO

  vRA 6.2.2 Build - 2754020

  vRO 6.0.1

  Through the vRA GUI I can create groups of companies with the same names in different tenants as follows:

  Tenant1: BusGroup1, BusGroup2, BusGroup3

  Tenant2: BusGroup1, BusGroup2, BusGroup3

  
  

  However, to create business groups with the same names in different tenants via the vRO, specifically the workflow plugin Library / vCloud Automation Center / Administration / Business groups / create a group of companies, fails in the second tenant with the below error:
  

  
  

  [42106] the specified condition is not respected for 'name '. (Name of the dynamic Script Module: createBusinessGroup #12)

  If I change the naming convention to be different by tenant, then I have no problem. I thought it might be a restriction in the product, but as said I was able to create with the names of same origin through the user interface.

  Anyone experience the same thing?

  This is a known problem within IaaS API the plugin vRO uses to manage groups of companies through business groups workflows. You don't have the same problem of the vRA UI because the user interface (according to the 6.x) does not use the same API IaaS to manage groups of companies.

  The only alternative to 6.x for now is to directly use the helper generic entity Manager plug-in itself. You can take a look at the first example in example CRUD Infrastructure tasks management Scripts.

  I hope it helps.

  Sergio

• Refresh the list of VIAccounts with PowerCli to select a newly created group

  Hi all

  I use a script that creates groups in Active Directory and connects to my server vCenter by using New-VIPermission. The trick is that it does not find the groups unless I restart the script (and so, I suppose, the connection).

  $My_Group = New-QADGroup -Name $My_AD_GroupName -SamAccountName $My_AD_GroupName -ParentContainer $My_OU -Connection $My_adConnection 
  New-VIPermission -Entity $param_objects -Principal "Domain\$My_AD_GroupName" -Role ($My_Role.Name) -Propagate:($My_Role.Value) | Out-Null 
  

  This script is going to create the group in my ad, but if you link to a new authorization in my vCenter, he'll be backNew-VIPermission Could not find VIAccount with name 'Domain\MY_GROUP_NAME'.

  When you restart the script, he will pass on the creation of group directly to the new VIPermission and properly bind to the vCenter object.

  I tried to add a waiting order, and a sleep of 5 seconds, but used to change one thing...

  How can I manage to reload and refresh the list of available groups without having to restart the vCenter connection?

  Thanks in advance!

  Well, I added the following:

  "while (!). "(() Get-VIAccount-groupe-nommer"REDOUTE_FRANCE\$ My_AD_Task_GroupName")) {Start-sleep - s 1}.

  And it works. Slow but it works

  Thanks, LucD!

• Created a new VLAN for VMs, now users can not connect, what did I miss?

  We have created a new VLAN to place related clones to, but we cannot connect through the client discovers via RDP and PCOIP

  Our measures are:

  1. added the vlan in the switch virtual distrubted Vsphere.

  2 past the basic VM to the new vlan. (The machine is Windows 7, and this seemed to re - enable IPV6, so I disabled it again with the common register edit).

  3. has taken a new snapshop for commissioning.

  4. added exceptions in our firewall between our server security and the new local VIRTUAL network for TCP/UDP (for PCOIP) 4172, 9427 TCP 3389 for TCP (for ROR) redirection and 32111 TCP (to redirect the USB).

  
  New clones of linke machines acquire new IPs with success. We can their ping by IP or FQDN.  We can even manually RDP in them.  But the customer view insists: "this office is currently unavailable. Please try to connect to this desktop computer later or contact your system administrator. »

  The only notable difference between the VLAN old and the new is the mask of 255.255.252.0 subnet 255.255.254.0 changed

  What did I miss?

  I saw the below error

  "'R = Office launch failed: com.vmware.vdi.sessionclientapi.TunnelManager$ TunnelManagerException: awareness port error: unable to connect to 137.216.48.33:3389, reason: Connection timed out: connect" "

  Can you connect to the Security Server and start a desktop session to the above IP address remotely?

• Create groups and send a notification email to specific groups

  Hi all

  I'm quite new to foglight. In our environment, we monitor DB ORACLE using foglight. My requirement is that I have to create 3 groups (Production stage & development). I need to issue alerts that are created for the Production environment for SCOM and for other groups, I need to send these as email notification. Can someone help me how to create groups and email notification separately.

  Thank you very much.

  NGO

  According to me, the simplest will be to do it in the DB administration dashboard.

  

  Golan

• BI Publisher create group problem

  Experts,
  I need your help to fix my microsoft model xml word add it to bi publisher.
  Recently, I had a problem loading xml data, after looking online, I found a sloution to delete or rename the xsd files. It worked well and I am able to load xml data now.
  Noe the problem is that I am not able to create a group. That's what I do.
  1. load the xml data.
  2. Insert the required fields.
  3. Select the fields and right-click to bi publisher
  And here, I see three options of 1 properties. 2. create a group of 3. Create a conditional region.
  When I click on one any of them does nothing, wait, a little box comes and goes very fast that says something xxxxxx runtime.
  
  But create group window does not open. I need you guys help to solve this problem.
  
  Thank you.

  Friends,
  Someone help me please...

• Creating groups in OBIEE 11 g

  Hi all
  
  I have a question. We use the AD to get the user. Now here's my question when I create a group and I wanted to assign the users between AD and the group which I created I don't have an option to assign users to the group.
  
  Exactly why it is like that.
  
  Is it love when I get the users of Active Directory (AD) then we can assign to groups (which we created manually) or we need create groups in the ad itself.
  
  
  
  Thank you
  Rondo.

  RPD groups are normally used for security and restrictions of the query at the data level (lines #, time max queries, direct requests to SQL) while catalog groups for access to the functional level (access to the answers, book, dashboards and the permissions on the folders and reports).

• Security at the level of the object by creating groups of catalog in OBIEE - 10 G

  Hi all
  
  I have a requirement to display the dashboard based on the user login. Ex. Mike belongs to HR, Smith to accounts
  When Mike connects, he should see only these three dashboards. View of CF, commune data1, data2 common. When Smith connects, he should see only these three dashboards. Display accounts, common data1, commondata2.
  Commondata1 and commondata2 dashboards has joint reports for all departments. Other dashboards is particular department with all the different reports. How can I implement this?
  
  One of my previous posts, I was told to do by using the object-level security by creating groups of catalog. Can you please provide me with instructions to end-to-end on creating object groups of catalog-based security level.
  
  Thanks for your time and your help.

  Hello

  Mike to HR
  Smit - account

  Yes, groups reach you by security at the object level by creating catalog

  (1) create a catalog group and users partially RPD (Ex: Account_grp, HR_grp)
  (2) assign user to this particular group (say Ex: Account_grp = Smith and HR_grp = Mike)

  (3) login (username Admin) dashboard and---> gale dashboard page layout--> add users to this particular
  Dashboard users and save it then
  try to connect to the user mike and smith, it will work

  you see link below

  http://www.rittmanmead.com/2010/01/OBIEE-10G-Web-catalog-best-practices/

  http://www.rittmanmead.com/2007/05/OBIEE-and-row-level-security/

  Thank you

  Deva