Creation of Blue Ray disc with still 5.0

Similar Questions

• Make blu - ray discs with the content of the standard dvd in Encore CS5

  Given that blu - ray 25 gb discs have become affordable, I would like to take advantage of the increased capacity of the content of the standard DVD on them.

  In a Word, I would put about 8 hours of flow 8000 720 X 480 video on a disc blu - ray 25 GB with no transcoding.  If I said that my project is a DVD I can tell it to "do not transcode" my property, but as soon as I change the option on Blu - ray, I have a wide range of Hi Def only options or automatic transcoding.  This is much more than 25 GB of the file size.  I can do this in TMP GENÇ TMPGEnc works, I can specify each track or not to transcode, and what bitrate etc. and then burn a blu - ray disc-compatible with the standard def content-but my menu options are more limited than in the still and the work process is slower.   I'd rather that in again if possible.  Is there a way to do that in Encore CS5?

  Stan Jones wrote:

  The problem for me is the reason why you do not get "do not transcode" for a DVD file apparently valid, just because you make a Bluray disc.  I wonder if you change the image size in the properties of transcoding bluray.  I just show him the "do not transcode" for a non-transcoded avi file and also a previously transcoded m2v.

  all my videos that I coded for this and the last project had a black frame around them. for some reason any capture has not quite completely filled the entire box. not a BIG deal, but in the video effect > motion > scale I changed them all to 103 to 105, and I think that this IS why with my workflow wanted to transcode. so I just jumped the man in the middle and in first, like mpeg to preserve all the stops of chapter and chapter names.

• First Adobe elements 12 - export ready the chronology of the project, the AVCHD files in a separate folder for burning on Blu Ray disc with other software?

  Hi, can anyone help please.  This is the first time I've used this forum.

  I use the first 12 items, a PC, 64-bit, Windows 7, to high power.

  Just started to hack AVCHD in this software.

  I would like to know if it is possible to export topped with AVCHD files in a folder somewhere else (which were imported in the project calendar), so that I can burn AVCHD trimmed (not in the form of a 'project') of Blu Ray disc files (using another software that I know that works to burn video files to Blu Ray disc).

  Kathy

  There is no export of Premiere Elements (any version) which will give you a file extensions .m2ts or. MTS. .M2ts and .mts are extensions of file that represents the container format that envelope the AVCHD video, and any audio compression file has.

  The .mp4 should serve your purpose... destiny using the file to burn it to Blu - ray disc format on say Blu - ray, copy the disc Blu - ray and edition BDMV folder video file in the file/STREAM BDMV folder (which is a .m2ts file).

  But what we could try (think it will work) to work around the problem

  1. export your Timeline with the publication + share/computer/AVCHD with presets = MP4 H.264 1920 x 1080 p 25.

  2. to the hard disk of the export of this mp4 saving location, then simply rename the mp4 to MTS or m2ts file extension.

  If you send this file to burn it to the disc Blu - ray to Blu - ray disc format, double check that this person software supports import of .m2ts and. MTS.

  Is the recipient of this emphasis on mts or m2ts file?

  Please read and review, maybe try it like a mini series of tests.  Feel free to ask if you have any questions about the foregoing.

  RTA

• How can I burn a Blu - Ray disc with menu?

  I have a project of 38 minutes composed mainly of footage HD (.m2ts. MP4 and some. MI/GAL). I try to make the project to Blu - Ray with Premiere elements 12, it takes about an hour to reach 98% with the message "Media encoding", then switches to "Compilation of media" and freezes there (I let it go for 6 hours with no end in sight). Manager tasks indicates that it uses not no matter what CPU cycles, while using up to 96% of the CPU before reaching this point. I was able to make this project on a DVD, folders on my HARD and AVCHD disc on a DVD successfully.

  For a test, I tried with the same results, a project of 1 minute. It wasn't until I removed the disc menu I could burn a Blu - Ray disc. I'm under the project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x 4 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM, processor 635. I found a number of references to the completion of 98%, but no real solution. Any help would be appreciated as I would like to produce a record high definition with menus...

  Success. Doubling of memory up to 8 GB has done the job. I was able to burn a Blu - Ray with the disc menu and beautiful results (the video is of good quality). I guess that the step "compilation media" requires a significant amount of memory for Blu - Ray.

  Surprisingly, it does not speed up the rendering process, but it must allow me to burn bigger projects in the future.

  Thanks to all those who have contributed with great suggestions...

• A Blue Ray disc with a digital copy of the film sends me to a page to update Media Player security, but the button updated it does not work

  I bought a 3-disc Blu - ray Star Trek film set.  The 3rd disc is a DVD-ROM with a digital copy of the film, for transfer to a PC.  When I try the transfer, there is a message saying update Windows Media Player to my system with the functions of security necessary to play protected content.  Then a link in the transfer of Star Trek dialog box sends me to http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp where there is a button to upgrade.  But it is faded, as when a disabled function is grayed out...  If clicked, the button will not activate.  What should do?

  I ran Windows Update and updates was not available in Media Player.  I have Windows 7 Starter on a netbook Gateway

  1/2 hour later, well, what do you know?  After many attempts and refresh in Internet Explorer, the upgrade button finally loaded and worked.  Problem solved.  Transferred film and plays very well.

• Disc Blu - ray plays with snowy at first photos

  I need help for a new show with my burning (Win 7 Pro, CS5.0 of original installation discs from Adobe, LG BD-burner; different BD - R, BD - RE discs: Sony, Philips, Kodak).

  While he played the breast still function "Preview From Here" shows no problems burning (either directly yet, or the file with ImgBurn) and plays for TV on Blu - ray (Panasonic DMP BDT330) Player, once from time to time, the beginning of elements menu plays Harfang noise intermittent with some black frames of anywhere between 3 to 6 seconds. Reading several times, this problem occurs at the beginning of the menu items different (and mainly during the playback of a playlist with the same elements).

  Playing commercial Blu - ray discs or my old Blu - ray disks, there is nothing wrong with reading.

  It seems to me that it is something that still or the LG OD made. Before you start to reinstall the suite CS5 (detached with first Revo), I'd be very happy any idea on the cause of this behavior.

  Also, it would help to eliminate some of the possible culprits if I could read the Blu - ray disc directly from my BD player. I would appreciate any suggestion for a good and tested software (free or paid for) that would not interfere with Adobe (or mess up my 'Virgin' OS ).

  Thank you very much

  LACI.

  P.S. My guess at this point is that the culprit is the BD burner. While DVD sales/BDs are "in a hurry", House burners use PCM (memory to change of phase - and also the memories of my years of Intel working on their reliability). If the laser in the burner gets more older/defective, then the merger / recrystallization of the PCM lmemory element could not be 'perfect', and when it is read, it sometimes gives the wrong answer (even with ECC, which I'm not sure that they employ in the DVD).

  I'm still waiting and much, appreciate some advice before I rush to buy a new burner or reinstall all CS5.

  Thank you

  LACI.

  P.P.S. sorry about all this information most of which is probably not relevant (especially the part of PCM memory ). I opened (should have done in the first place) the BD drive on my computer and checked the m2ts files in BDMV > STREAM > *. m2ts. They all (including animated menus) play perfectly on the computer with WMP. Thus, burning and playback of these files causes no problem. Most likely, the problem comes when still built the navigation. Since the menus animated on the disk also play without any hickups, I guess that's the recall itself that causes these problems. I'll reinstall CS5. (The question still open at this stage is, how it is possible that this snow a few seconds before some of these files m2ts doesn't always happen at the same file m2ts replaying the disc even comics on TV.)

  I would still like comments from expert users.

  BTW, is there any program out there whith what I could replace Adobe Encore? (It's the place only weakly in the range ).

  -Laci.

  at the beginning of some elements of the menu plays a snowy intermittent noise with some black frames for anywhere between 3 to 6 seconds. Reading several times, this problem occurs at the beginning of the menu items different (and mainly during the playback of a playlist with the same elements).

  What does the menu items? I guess that's the menus themselves, not chronology movies?

  What might this would create this? I don't know, but suppose it's more likely from disc problems and others. And Yes, where things are put physically on the disk can be a problem. But likely Burns/drive problems.

  Have you tried this on another drive?

• Preview works perfectly, Blu Ray disc is not - still Cs5.1

  Hi all

  I never had no problem creating blu ray front discs until one. I have a project created with no error reported when I check it. The chart seems good. The calendar is not crazy long names with spaces. The preview plays PERFECTLY! After burning a blu - ray disc project, I see that in a specific menu buttons do not work even if they are connected to the appropriate time. Also the FirstPlay which is a video short 20 sec will not play.

  Its driving me crazy cause ive never had trouble creating a blu - ray player before. Ive tried to play in three different actors and the same results.

  Am I missing something

  

  

  

  Import formats http://forums.adobe.com/thread/622722 can still help

• Blu - ray disc will not play with Windows 7 installed on the computer hp laptop pavilion g6

  Although the non - Blu Ray discs play fine on my HP Pavilion laptop with Windows 7, discs Blu Ray will not be. How a computer model does this work?

  Hi, John:

  It's the hard drive.

  You need to go to Device Manager, and then click to expand the category of DC/DVD player.

  If the name of the dvd player does not have a BD in the model, it is just a standard dvd player and cannot play blue ray discs.

• Dvd player MediaSmart not working - when a Blu - ray Disc I'm invited to be updated, but even with the update it will not play.

  I have laptop HP Pavilion dv7-1260.  When I put in a blu - ray disc I'm propmted to get an update.  Even with the update, it will not play a blu ray.

   

  Hello

  ·         What is the update message that you receive?

  ·         Do you have an error message when you try to read the Blu - ray Disc?

  ·         This problem occurs only with Blu ray discs or any of the others?

  To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/MPEG-and-DVD-video-frequently-asked-questions

• Still adjust the size to fit on blu - ray disc?

  I have a number of files this total:

  Size - 9 373 926 KB or 8,939 GB total

  Total-3 hours, 2 minutes and 41 seconds

  I burned a blu - ray disc before and he played very well, but after that I made a few changes and I tried to implement a new project to burn this image disk size is too big when he finished. Will still try to make the size on disk less then 23 GB? or should I adjust the settings?

  

  The only way to have an automatic adjustment is that if your belongings are UN-transcoded... to a DVD (I do not BluRay) I export P - Pro, DV AVI and yet and still have to do the automatic transcoding

• HDCP issues OTP-S590 vidoe by STR-DH830 playback blu - ray disc playback. OK with dvd

  When I play a blu - ray disc BDP-S590 blu ray player through a STR-DH830 video whites there an HDCP problem. Is it possible to disable DHCP. It only happens when I play a blu - ray disc. When I play a DVD disc, there is no video cutting.

  Hello Gary,.
  Welcome to the community of Sony.

  Disable the [HDMI Deep Color output] in the BD drive and check if it helps.

  See the following link for possible troubleshooting steps.

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C567099

  If my post answered your question, please mark it as an "accepted Solution".

• I use a blu - ray disc as my backup media by using the backup and restore, but windows will say still unable to perform this task

  I have a HP h9 - 1250t and can never use a blu ray disc tp save my work using the command from the windows Explorer which is strange since I use blu - ray disc in my dell xps 14, any help on this?

  Hello edilbertojun,

  Backup stores data in a compressed format on optical drives and blu - ray is an optical device device, I don't think you can use Windows built in backup and restore functionality.

  You must use a backup solution 3rd party backup on the Blu - ray disc.

  I may be wrong so that other members of the community can be better able to solve this problem.

  Marilyn

• Failure of a picture Blu - ray disc manufacturing met still CS4

  As a reminder, CS4, do you want to make a picture for the blu - ray disc.

  Failed: error Bluray / Fatal Error Code Note 6.

  Parameters: Size: 25 MB and Image: BD - R

  Construction of a disc to the DVD image was no problem.

  What can I do?

  Stephan

  YES!

  Thanks John, I followed your instructions and it worked!

• Build another Panel, Format Blu - ray disc information shows that 12.45 GB is used and 12.55 GB is free, even if I had not started construction. Why?

  Adobe CS 5.5 S & T Ed MC. Win7Pro64.

  Video clip Type: MPEG Movie (AVCHD Progressive)

  Image size: 1920 x 1080

  Frame rate: 59.94

  Source Audio Format: - compressed - 48000 Hz 6-channel

  Project Audio Format: comma floating 48000 Hz - 32 bit - 6 channels

  (A few clips audio is stereo)

  Average data rate: 3.0 MB/second

  Format of the pixels: 1.0

  Photos JPEG 16MP.

  The Build Panel still , Blu - ray format, the Disc info shows that 12.45 GB is used and 12.55 GB is free, even if I had not started construction. Why? I expect 0 used and 25 GB free. Audit project revealed no problem. I don't know what info to provide an informed answer, but here is some info:

  First Pro CS5.5.2 to CS5.1 again project: ()after making 1.5 h ) dialog box Adobe Dynamic Link - send to still - new project: settings: Mode of creation: Blu - ray.
  Default conversion settings... Automatic transcoding: Max A / V Bitrate 40.0 Mbps (I chose it arbitrarily) video transcoding: Codec H.264 (this will provide a higher than MPEG-2 definition?); Dimensions 1920 x 1080 (what I want); Frame rate 29.97 (selection 59.97 reduced dimensions 1440 x 1080); Audio transcoding system Dolby Digital (PCM would provide better fidelity?)
  

  On Panel project still, two files have appeared, Types: chronology and Premiere Pro sequence.

  I created no menus and no subtitle track.

  On the Timeline panel, the end prproj Action is Stop, length is 14; 58; 59, 00, remote Menu is back to the last Menu. Chapter 1 (the only chapter) link is not defined. Properties Panel, in and displays all zeros, end Action is not defined.

  I burned a BD-R disc writing speed 8 x (2 hours to transcode) and it is only half used. He played very well, but I had 12.5 GB, 2.5 X instead of 25 GB, 5 X that of the DD definition. What must be corrected to get the X 5 full definition?

  Note any other issues such as the length of time transcoding?
  Thank you, Don

  That's the prediction of yet which is used and free.

  The automatic can be applied to your PR sequence (i.e. the "asset" will get transcoded), but you must look at the setting of transcoding for the asset (ook in the project Panel to the right for the setting of transcode Blu - ray). I'm not sure you can max a Blu - ray player with only an hour of material. How is it?

• Qosmio-F750-11U: Blu - ray disc player no longer works

  My Blu - ray player stopped working a few months previously, even if it still plays DVD.

  TEMPro told me that there is a new driver, so I tried to install that:
  Support1. Toshiba-tro.de/Tedd-files2/0/bluraydp-20130117155646.zip

  I unzipped and ran the .exe. InstallShield says ' build Version of the source is not build target.
  that looks more like something the programmers must have correced instead of
  that we poor users could see.

  Has anyone else you have the same problem?
  Preferably with solution ;-)

  TIA & best wishes

  Hello

  The package to install is only an update / patch.
  This package requires the installed Blu - ray TOSHIBA disk drive software.
  TOSHIBA Blu - ray disc player software is installed on your system?

  The exe file is to be found in:
  TOSHIBA\TOSHIBA Blu - ray Disc Player\SMIPlayer.exe

  If its not available or if the version does not match, the installation of the patch fails.