Creation of object table references

Similar Questions

• Assistance in creation of objects Table nested in a column

  Hi all
  
  In our project requirement, we are supposed to create a table1 consisting of such object1 of the column and Object1 has a nested object (object2) as one of the column.
  
  We are able to create the table (table-name is op_sam) for object1
  
  create or replace type testobj1 as an object (number of c1, c2 number);
  create or replace type t_testobj in the testobj1 table;
  
  create table op_sam (obj_id varchar2 (100), workobj t_testobj)
  store workobj table nested as nested_tab back as a value;
  
  We strive to store op_sam as an object in an another table prepop
  
  We have created the object for the op_sam
  
  create or replace type op_sam_obj as an object (obj_id varchar2 (100), workobj t_testobj);
  create or replace type t_op_sam_obj in the op_sam_obj table;
  
  
  
  We gave the following script to create the table with the column as t_op_sam_obj
  
  create table prepop (ob_id varchar2 (20), t_op_sam_obj object2)
  nested table object2 store like nested_tab1 back as a value;
  
  
  ORA-22913: must specify the name of the table for the nested table column or attribute · nested tables ·
  
  could you please suggest me to fix this?

  Hello

  Each object of type table needs a nested table.
  Subject: object2 has a nested table object: workobj
  Then, who also has a nested table clause.

  CREATE
       TABLE prepop
       (
            ob_id VARCHAR2(20)
       , object2 t_op_sam_obj
       )
       nested TABLE object2 store AS nested_tab1
       (
            nested TABLE workobj store AS nested_tab2
       )
          return as value
  ;
  

  This will create 3 tables:
  nested_tab2 as an embedded table
  nested_tab1 as an embedded table
  prepop

  Kind regards

  Peter

• function not returning object table properly

  Rather than return a table, my function returns this:
  
  SCHEMA_OWNER. TBL_SUMS ([SCHEMA_OWNER. SUMS_OBJ])
  
  Did anyone see a syntax error in my function or the DOF of my table and object types?
  
  It is a stripped down, simplified version of my function:
  
  create or replace FUNCTION "F_TEST" (number of p_skey, p_start_date date, p_end_date date)
  RETURN tbl_sums
  
  IS
  
  tmp_A NUMBER;
  tmp_B NUMBER;
  
  l_tbl tbl_sums: = tbl_sums();
  
  BEGIN
  
  SELECT SUM (FieldA), SUM (FieldB)
  in tmpA, tmpB
  FROM MaTable where SKEY = p_skey
  and DATE_VALUE > = p_start_date
  and DATE_VALUE < p_end_date;.
  
  l_tbl.extend;
  l_tbl (l_tbl. (Count()): = sums_obj (p_start_date, p_end_date, p_skey, tmpA, tmpB);
  Return l_tbl;
  
  END;
  
  My models are:
  
  create or replace type sums_obj is object (DATE start_date, end_date DATE, skey NUMBER, SumA, SumB NUMBER);
  create or replace type tbl_sums is table of the sums_obj;
  
  
  Thank you!

  >
  RETURN tbl_kpi
  >
  What is 'tbl_kpi '? Which is not defined anywhere. Your original post said:
  >
  RETURN tbl_sums
  >
  We cannot help you if you don't publish what you actually use. Cut & paste is ok, but you have to paste the correct code.

  Your function returns a TABLE, but it is NOT in the PIPELINE. For example, if you query the DOUBLE function you will get a DATASET as a result.

  If you query the function AS A TABLE, you will get the "content" of the table.

  If you make your function a PIPELINED function then you use PIPE ROW to return each line but the function is always declared to return a TABLE. This is perhaps what is confusing you.

  Try the following code to see what the difference is.

  Here are two SQL types based on the EMP table in the scott schema.

  -- type to match emp record
  create or replace type emp_scalar_type as object
    (EMPNO NUMBER(4) ,
     ENAME VARCHAR2(10),
     JOB VARCHAR2(9),
     MGR NUMBER(4),
     HIREDATE DATE,
     SAL NUMBER(7, 2),
     COMM NUMBER(7, 2),
     DEPTNO NUMBER(2)
    )
    /
  
  -- table of emp records
  create or replace type emp_table_type as table of emp_scalar_type
  /
  

  Now - here's a function (similar to yours) that returns him EMP_TABLE_TYPE. NOTE: the function IS NOT PIPELINED

  CREATE OR REPLACE function SCOTT.get_emp1( p_deptno in number )
    return emp_table_type
    as
  tb emp_table_type;
  BEGIN
    select emp_scalar_type(empno, ename, job, mgr, hiredate, sal, comm, deptno)
      bulk collect into tb from emp where deptno = p_deptno;
    return tb;
  end;
  /
  

  If I simply select the function itself twice I get this:

  select get_emp1(20) from dual
  
  GET_EMP1(20)
  (DATASET)
  

  I can use TOAD or sql developer to examine this dataset and see the documents.

  But I can actually query the records by using the TABLE function:

  select * from table(get_emp1(20))
  
  EMPNO     ENAME     JOB     MGR     HIREDATE     SAL     COMM     DEPTNO
  7369     SMITH     CLERK     7902     12/17/1980     800          20
  7566     JONES     MANAGER     7839     4/2/1981     2975          20
  7788     SCOTT     ANALYST     7566     4/19/1987     3000          20
  7876     ADAMS     CLERK     7788     5/23/1987     1100          20
  7902     FORD     ANALYST     7566     12/3/1981     3000          20
  

  This is a similar function. It returns the same EMP_TABLE_TYPE, but it is a PIPELINED function.

  -- pipelined function
  create or replace function get_emp( p_deptno in number )
    return emp_table_type
    PIPELINED
    as
     TYPE EmpCurTyp IS REF CURSOR RETURN emp%ROWTYPE;
      emp_cv EmpCurTyp;
      l_rec  emp%rowtype;
    begin
      open emp_cv for select * from emp where deptno = p_deptno;
      loop
        fetch emp_cv into l_rec;
        exit when (emp_cv%notfound);
        pipe row( emp_scalar_type( l_rec.empno, LOWER(l_rec.ename),
            l_rec.job, l_rec.mgr, l_rec.hiredate, l_rec.sal, l_rec.comm, l_rec.deptno ) );
      end loop;
      return;
    end;
    /
  

  The ONLY way I can query this function is using the TABLE function:

  select * from table(get_emp(20))
  
  EMPNO     ENAME     JOB     MGR     HIREDATE     SAL     COMM     DEPTNO
  7369     smith     CLERK     7902     12/17/1980     800          20
  7566     jones     MANAGER     7839     4/2/1981     2975          20
  7788     scott     ANALYST     7566     4/19/1987     3000          20
  7876     adams     CLERK     7788     5/23/1987     1100          20
  7902     ford     ANALYST     7566     12/3/1981     3000          20
  

  The query of the PIPELINED function is the same and the result set is the same.

  The difference is that the PIPELINED function returns ONE LINE at a time and does NOT need to accumulate a large amount of data in a collection before returning. This collection uses the memory of expensive PGA and the more data you have the more memory it uses.

  Your function (and my only similar) return NO data until it has produced ALL of this. And he uses this expensive PGA memory. What is the point to create your collection at a time line and wait until you have everything before send it back you?

  You can easily modify your function and add PIPELINED to the declaration. Then, use the PIPE ROW clause to return each row that it is produced. Which will eliminate the need of collecting (and memory) within the service.

  You can also then follow up calls to function if you need to.

  See 'Use of functions Table in pipeline and parallel' in the data cartridge Developer Guide
  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28425/pipe_paral_tbl.htm

  There is little use for your function that is not in the pipeline, but returns a type of table, unless you used to store the array type in a column of an object table.

  There are many uses for PIPELINED functions.

• object on a simple object null reference

  Turn it on some of the projects currently working on.

  So I have this

  main.conductor.gotoAndStop (4);

  get the "#1009: cannot access a property or method of an object. null reference" error.

  Its scope, I think. the same framework and not at course time am damned a subject are right.

  frustrating it is like script101 of the action and can't make it work.

  Click the object on the stage that you think is key (to select).  take a screenshot showing the chronology, the object on stage and the properties panel.  Attach the screen shot here.

• How to upload an image or a file in flash as a blob in an object table.

  How to upload an image or a file in flash as a blob in an object table.
  
  What are all the possible ways, we can do it.

  A search on the forum (or google) would be my first choice, as this issue appears from time to time.

  Then, without the knowledge of your environment (jdev version and battery technology), it is difficult to give a profound response.
  All I can say is that it is possible.

  Timo

• SQL to list out all objects (tables) that refrence to a table addicted.

  Hi all -
  
  I want to write a SQL that lists all objects (tables) that refrence for a table given.
  
  For example
  
  Say B Table refrence to A.col1 and Ref table C in table A.col2 table
  
  Now I want a SQL which happens after output: -.
  
  TABLE referenced by column
  A B.col1 B
  A C.col4 C
  
  
  
  Thank you!!!

  This also includes the owner and the costraint_name

  select aco.owner, aco.table_name, ac.constraint_name, ac.table_name, acc.column_name
    from all_constraints ac,
         all_constraints aco,
         all_cons_columns acc
   where ac.owner=acc.owner
     and ac.constraint_name=acc.constraint_name
     and aco.owner=ac.r_owner
     and aco.constraint_name=ac.r_constraint_name
     and ac.constraint_type='R'
  

• How to get the line object table View

  Hello

  I use Jdev 11.1.1.7

  My requirement is, there are two ways I can get lines in my logic, you're based getFilteredRows (RowQualifier) and vo.executeQuery () - on a specific condition or I should consider first or later...

  getFilteredRows() returns the line [], I need to find a way to make [Row] of the View object properly after ececuteQuery() on the VO... When I use vo.getAllRowsInRange () which returns only a single line, but what iterate the VO even, I see that there is more than one line... How can he get all the range of the VO table?

  Thank you

  You can set the size of the field-1?

  ViewObjectImpl (Oracle ADF model and Business 10.1.2 API components reference)before calling getAllrowsinRange?

• FindGrep results in tables tables, depending on the object table of GOLD?

  Hello

  Currently, I get the text, I would like to consider using an index of PointInsertion from a previous search:

  ... . parent.insertionPoints.itemByRange (startPos, endPos)

  Original research, as I did, I got a simple table, but the search inside the insertionPoints, I had an array of arrays.

  Code example below. Just open a new blank document in InDesign and run the following. Adapted text is added in the code example, of research. (Tested in CS6 so far.)

  var activeDocument = app.activeDocument;
  var pg = activeDocument.pages[0];
  
  var fr = pg.textFrames.add();
  fr.geometricBounds = [20, 20, 100, 100];
  fr.contents = 'a00sdf 12-9999\n15-888'
  
  app.findGrepPreferences = app.changeGrepPreferences = null;
  // Search for digits on a certain pattern
  app.findGrepPreferences.findWhat = '\\d\\d-\\d\\d+';
  var findings =activeDocument.findGrep(); // Searching the whole document
  
  // The result is an array of Text objects
  $.writeln('1. ' + findings[0].constructor.name);
  // Result: Text
  
  
  // Now search using an insertionPoint object instead. Search from the start (0) up to the position where we found the first match in the grep above.
  var myTextObj = findings[0];
  var insObj = myTextObj.parent.insertionPoints.itemByRange(0, myTextObj.index)
  // Now just search for any two digits
  app.findGrepPreferences.findWhat = '\\d\\d';
  var innerFindings = insObj.findGrep(); // Searching inside the insertion points object
  
  // The result is an Array of Arrays
  $.writeln('2. ' + innerFindings[0].constructor.name);
  // Result: Array
  
  // ... inside which are the Text objects
  $.writeln('3. ' + innerFindings[0][0].constructor.name);
  // Result: Text
  
  // ... so why did I get an array of arrays when searching inside the insertionPoints object?
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Thank you

  Andreas

  Hi all

  In any case, a range of text is a special beast compared to the results of.itemByRange (...) the regular Collection.

  The fact is that myText. insertionPoints.itemByRange (0, myIndex) provides a collective PointInsertion (and it would be the same with the characters, wordsor any collection of text), but this text range instantly forced into an single text unit as soon as you access a property. Compare:

  .pointSize de.stories.itemByRange (0, -1) myDoc(1); => Size chart

  
  

  (2) myText. insertionPoints.everyItem () .pointSize; => Size chart

  
  

  (3) myText.pointSize de.insertionPoints.itemByRange (0, -1); / /-online single size (even in the heterogeneous context)
  

  
  

  Thus, text ranges are specially treated as text units, which leads to ask why myRange.findGrep () returns an array of arrays. IMO, the DOM is not in conformity on this point.

  As shown in Peter, the workaround is easy. We just need to explicitly convert the beach in unity of the text reference is made, using either () myRange.getElements [0] or myRange.texts [0].

  @+

  Marc

• Create ctxsys.ctxcat index in the object Table

  What I'm trying to do is to create an index of type ctxsys.ctxcat on 'col3 '. But this 'col3' is not a 'TABLE', but in an object, as follows:
  
  CREATE OR REPLACE TYPE TestObj AS OBJECT
  (
  col1 varchar2 (10),
  col2 varchar2 (10),
  COL3 varchar2 (10),
  COL4 varchar2 (10)
  );
  
  
  CREATE OR REPLACE TYPE AS THE TestObj TABLE TestTable;
  
  Now, how can I create an index of type ctxsys.ctxcat on 'col3 '?
  
  create index test_ind on TestTable (col3) indextype is ctxsys.ctxcat;?
  
  
  Thank you for helping.
  
  
  Scott

  You cannot index a user-defined data type. Indexes are used for persistent storage of persistent objects.

  What I suspect you really want is an associative array or an array indexed by integer binary. Demos here:

  http://www.morganslibrary.org/reference/arrays.html

• [Beginner] Creation of nested table base

  Hello.
  
  I have a diet of base here. First of all, I have a type called student with different attributes. I also have a type of degree, that contains a nested table of students. I try to apply it like this:
  
  CREATE OR REPLACE TYPE Student_type AS OBJECT)
  Name VARCHAR2 (20).
  REF Degree_type degree
  );
  /
  CREATE or REPLACE TYPE Students_NT as THE Student_type TABLE;
  /
  CREATE OR REPLACE TYPE Degree_type AS OBJECT)
  Name VARCHAR2 (20).
  Students Student_NT
  );
  /
  
  It seems that there is a circular dependency here, how can I solve it? I thought I tried to add the attributes of the relationship (the reference in Student_type) and the nested in the Degree_type subsequently changing table types, but it does not work.
  
  What can I do? Thanks in advance.

  Hello

  You must create all first, as explained in the documentation the DEGREE_TYPE as an incomplete type:
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14260/adobjmng.htm#ADOBJ00402

  So in your case:

  CREATE TYPE Degree_type;
  /
  
  CREATE OR REPLACE TYPE Student_type AS OBJECT(
   Name VARCHAR2(20),
   Degree REF Degree_type
  );
  /
  
  CREATE OR REPLACE TYPE Students_NT AS TABLE OF Student_type;
  /
  
  CREATE OR REPLACE TYPE Degree_type AS OBJECT(
   Name VARCHAR2(20),
   Students Students_NT
  );
  /
  

• Open the object vi reference - problem

  I have this vi:

  

  The refnum owner is the vi himself, "Path" is the path of a lvproj project file.

  However, when I try to run the vi I get an error "the specified object is not found.".

  This primitive returns a reference to an object within a VI (as a control). A project is not inside a VI, so it is not sensible to use this function to get a reference to a project.

  If you want to get a reference to a project, there is a class of Application called Project.Openmethod. You can also use the Application class [Project.Projects] property to iterate over all open projects.

• Copying objects table?

  Here, all managed a successful deep copy of an array of objects?

  Can't seem to find a way to stop him now on the reference objects rather than new items.

  Any help would be greatly appreciated.

  You need what C++ guys call a copy constructor.  Something like:

  class MyClass {
    public MyClass(MyClass old) {
      // initialize fields to be copies of fields of old
    }
  }
  
  MyClass[] copyArray(MyClass[] original) {
    MyClass[] copy = new MyClass[original.length];
    for (int i = 0; i < original.length; ++i) {
      copy[i] = new MyClass(original[i]);
    }
    return copy;}
  

  Edit: I forgot the back in the code example.

• Throw the list "cannot access a property or method of an object. null reference" during the scrolling of the white spaces

  Follow these steps:

     import flash.display.Sprite;
  
      import qnx.fuse.ui.listClasses.List;
      import qnx.ui.data.DataProvider;
  
      [SWF(height="1024", width="600", frameRate="30", BackgroundColor="#000000")]
      public class test3 extends Sprite
      {
          public function test3()
          {
              var l:List = new List();
              l.dataProvider = new DataProvider([{label:1},{label:2}]);
              l.setPosition(200,200);
              l.width = 200;
              l.height = 200;
              addChild(l);
          }
      }
  

  And run the application.

  Point the finger just below the last line of the list, and then drag upward or downward.

  You get this:

  TypeError: Error #1009: Cannot access a property or method of a null object reference.
      at qnx.fuse.ui.listClasses::List/resetCellState()[E:\hudson\workspace\GR2_0_0_AIR_SDK_API\src\qnxui\src\qnx\fuse\ui\listClasses\List.as:2532]
      at qnx.fuse.ui.listClasses::List/deselectCellDown()[E:\hudson\workspace\GR2_0_0_AIR_SDK_API\src\qnxui\src\qnx\fuse\ui\listClasses\List.as:2337]
      at qnx.fuse.ui.listClasses::List/scrollMouseMove()[E:\hudson\workspace\GR2_0_0_AIR_SDK_API\src\qnxui\src\qnx\fuse\ui\listClasses\List.as:2349]
  

  How I not imprison it? Is this a bug of the qnx.fuse.up.listClasses.List component?

  After typing this post, I went back to the SDK download page and noticed there is a new SDK available (as dated February 3, 2012) 2.0.0. I used the previous version dated SDK Date January 16, 2012.

  So I advanced and upgraded to the latest version of the SDK, and this error no longer occurs.

  It must have been a bug.

  So I solved (kind of) my problem... Kudos to me... ha!

• Nested in the object table

  Hi gurus,

  SQL > select * from v version $;

  BANNER

  ----------------------------------------------------------------

  Oracle Database 10g Release 10.2.0.4.0 - Production 64-bit

  PL/SQL Release 10.2.0.4.0 - Production

  CORE 10.2.0.4.0 Production

  AMT for Linux: release 10.2.0.4.0 - Production

  NLSRTL Version 10.2.0.4.0 - Production

  SQL >

  I want a table nested in the object. Here's my implementation

  CREATE or REPLACE TYPE test_language_obj AS OBJECT

  (returned VARCHAR2 (3),)

  Description varchar2 (50)

  )

  /

  CREATE or REPLACE TYPE test_language_tab AS TABLE OF THE test_language_obj;

  /

  CREATE or REPLACE TYPE test_Region_obj () AS OBJECT

  get rid of the VARCHAR2 (6).

  r_date DATE,

  lang_tab test_language_tab,

  CONSTRUCTOR FUNCTION test_Region_obj RETURNS RESULTS of AS SELF);

  /

  CREATE or REPLACE TYPE test_Region_tab AS TABLE OF THE test_Region_obj;

  /

  When I run the suite of applications, it works fine

  Select test_language_obj ('001', 'This is the English language code') of double

  But when I run the following question

  SELECT Test_Region_obj ('111 ', sysdate, (select test_language_obj ('001', 'This is the English language code') of double)) double

  It gives following error

  ORA-06553: PLS-306: wrong number or types of arguments in the call to 'TEST_REGION_OBJ '.

  My goal is to get all languages within the region.

  Anyone can point out what I'm missing here?

  Thanks in advance.

  The problem is that your test_Region_obj does not contain an object of test_language_obj but a collection of test_language_obj objects.

  If the constructor of test_Region_obj waiting for the 3rd Argument of type test_language_tab instead of test_language_obj.

  HTH

  Roger

• Conversion of ore.list in an object table Oracle DB

  Hello

  I would like to know if there is a way to convert an array object ore.list and store it in the database? After using ore.groupApply (), we get the output grouped by a column 'Region '. I need to store it as a table in the Oracle database. In addition, I get error when using rqGroupEval().

  I tried to use 2 methods below:

  Method1: Embedded Script R - Interface D - used the script below

  modlist <-ore.groupApply)

  X = OOS_AGGR_FACT,

  INDEX = OOS_AGGR_FACT$ PEP_REGION_ASM,.

  {function (DAT)}

  MOD <-lm (OOS_LOST_DOLLARS ~ DAY_OF_WEEK + STORE + PEP_BRAND + ITM_VELOCITY_CLUSTER + STR_VELOCITY_CLUSTER + OOS_REASON + DAYS_OF_SUPPLY, dat)

  PRD <-predict (mod, dat = newdata)

  PRD [As.Integer (rownames (PRD))] <-prd

  cbind (dat, PRED = prd)

  });

  Result: Back o/p in the form of ore.list. How to convert this table and stores it as a table in the database?

  Method2: Embedded Script R - SQL Interface

  (1) created a packages such as:

  create or replace package oos_pkg_1 as type rec is being rendered (VARCHAR2 'RECORD_DATE' (255), 'DAY_OF_WEEK' VARCHAR2 (255), 'STORE' VARCHAR2 (255), VARCHAR2 "PEP_REGION_ASM" (255), VARCHAR2 "PEP_BRAND" (255), VARCHAR2 "ITM_VELOCITY_CLUSTER" (255), VARCHAR2 "STR_VELOCITY_CLUSTER" (255), VARCHAR2 "OOS_REASON" (255), "DAYS_OF_SUPPLY", "OOS_LOST_DOLLARS" NUMBER); News from type is ref cursor return rec. end;

  (2) created a function like:

  create or replace function oosgroupeval_1

  (inp_cur, oos_pkg_1.cur,

  par_cur sys_refcursor,

  out_qry varchar2,

  grp_col varchar2,

  exp_txt varchar2)

  return the sys. AnyDataSet

  parallel_enable in pipeline (inp_cur hash partition ("PEP_REGION_ASM"))

  cluster inp_cur by ("PEP_REGION_ASM")

  using rqsys.rqGroupEvalImpl;

  (3) finally used the R script below:

  Start

  sys.rqScriptDrop ('OOS_LD_Prediction');

  sys.rqScriptCreate ('OOS_LD_Prediction',

  "{function (dat, datastore_name)}

  MOD <-lm (OOS_LOST_DOLLARS ~ DAY_OF_WEEK + STORE + PEP_REGION_ASM + PEP_BRAND + ITM_VELOCITY_CLUSTER + STR_VELOCITY_CLUSTER + OOS_REASON + DAYS_OF_SUPPLY, dat)

  PRD <-predict (mod, dat = newdata)

  PRD [As.Integer (rownames (PRD))] <-prd

  RES <-cbind (dat, PRED = prd)

  }');

  end;

  /

  Select *.

  table (OOSGROUPEVAL_1)

  cursor (select day_of_week, store, pep_region_asm, pep_brand, itm_velocity_cluster, str_velocity_cluster, oos_reason, days_of_supply, oos_lost_dollars

  of oos_aggr_fact).

  cursor (1 select as "ore.connect", "LP" as "datastore_name" of the double).

  ' select day_of_week, store, pep_region_asm, pep_brand, itm_velocity_cluster, str_velocity_cluster, oos_reason, days_of_supply, oos_lost_dollars, 1 PRED

  to oos_aggr_fact ',

  "PEP_REGION_ASM,"

  'OOS_LD_Prediction'));

  Result: Error like below

  Error in "contrasts <-' (' * tmp *', value = contr.funs [1 + isOF [nn]]):

  contrasts can be applied only to drivers with 2 or more levels

  Can you get it someone please let me know if I am missing something in the above 2 methods?

  Namrata

  Integrated R Script error: cannot allocate vector of size 838,6 MB

  In ore.groupApply, use the PLEASURE. VALUE as a model for the return value.  Example: similar to your ore.groupApply using the iris of build-in data frame

  # Send data frame iris to IRIS database table

  Ore.Create (iris, "IRIS")

  test<- ore.groupapply(iris,="">

  {function (DAT)}

  #library (ORE)

  # ore.connect ("rquser", "main", "localhost", "rquser", all = TRUE)

  species<->

  MOD<- lm(sepal.length="" ~="" sepal.width="" +="" petal.length="" +="" petal.width,="">

  PRD<- predict(mod,="" newdata="">

  PRD [As.Integer (rownames (PRD))]<->

  Data.Frame (species = species,

  PRED = prd,

  stringsAsFactors = FALSE)

  },

  fun. VALUE =

  Data.Frame (species = character(),

  PRED = numeric(),

  stringsAsFactors = FALSE),

  parallel = TRUE)

  # Save the results in the TEST database

  Ore.Create ("TEST" test)