Crush returning them SubVIs setting
Hello
I would like to run multiple instances of a reentrant VI. The twist is that this VI has many SubVIs and some of these SubVIs are "Functional Global Variable" (-on while loop shift register).
Thus, instances share the same memory allocation for this variable. I wish that these instances to share anything and independent...
Is there a way to make sure that all Subvi has its own memory allocation in its scope of application (reentrant root VI)?
Thank you very much!
Vincent
We did something like this a few years ago--we had 24 'stations', each consisting of a camera and extra I/O and released material to each of them to help start the asynchronous call. We went in every Station, a Station ID (a number between 0 23) allows us to create (if necessary) a unique name of entities (such as the names of queue) on a per-Clone basis. Within each Clone of higher level, these screws should be specific to the Clone were coded as Reentrant, those who could be "shared" were not. We don't use FGVs, but if we needed a specific Clone FGV, we would have made Reentrant.
Bob Schor
Tags: NI Software
Similar Questions
-
my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?
Hello
Recuva worked for posters that have been in your same situation here
a clean install wipes the hard drive clean of everything
You cannot undo what you've done
If you have lost data, you can try this
http://www.Piriform.com/Recuva
Read also:
Since we don't know exactly how you reinstalled it seek a windows.old folder
How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation
http://support.Microsoft.com/kb/932912
or even return to a previous operating system by using the information in file window.old at the link below
http://support.Microsoft.com/kb/933168
If the above does not work:
Try the data recovery experts
but they are very expensive
-
I have a document that keeps returning, "trust settings are not activated.» How can I activate them please?
Hello
Please check the following thread.
Let me know if it helps.
Thank you
Abhishek
-
The VI call does not show correct Boolean value returned from Subvi
I have a Subvi, which returns a Boolean to indicate whether the system is WoW64 or not. When I run this by herself or with a probe VI, I get a TRUE result (my OS is 64-bit Win8, and I am running 32-bit LV2015). When the VI is called as a Subvi, and the output is wired to a Boolean value on the front of the caller, the value is FALSE, even if it is TRUE inside the Subvi. The LV2014 code is attached below. It happens in 2014 but not 2013. Is there something to do with DLL calls made by the Subvi which is corrupting the Subvi call?
-
Theme Hospital, set of 16 bits works is not on Windows 7 64 bit
coupl'a day there, I tried inttalling one of my favorite games ever hospital theme but is a set of 16 bits and I have a 64 bit system could there be an update for win 7 64-bit to fix this quite annoying version of windows or not?
PS just wonderin
You cannot run 16-bit applications on a 64-bit system. Try dosbox (www.dosbox.com), a program of emulator BACK (32-bit = works on x 64), version 0.73 is compatible with Theme Hospital (1997).
There is nothing to blame "this quite annoying version of windows. Some older programs require direct access to material which is prohibited on modern systems, some require drivers that do not work on 64-bit. Backward compatibility to the stone age could be achieved with a lot of programming but no 64-bit OS do that (not just Windows), because the affected applications are too few and mostly out of use.
-
We won't display 1440 x 900 in Mozilla. Will return to the setting of the crt
Whenever I go to Mozilla, it allows to set the mode crt screen. I can't do reset. When not in Mozilla, the big screen is correct.
Check that you are not running Firefox in compatibility, or with a reduced screen resolution mode.
You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
Make sure that all items are disabled in the tab "Compatibility" in the Properties window. -
I ERASED MY DOWNLOADS BY MISTAKE-HOW RECOVER AND RETURN THEM?
I looked for answers on how to restore and as someone who doesn't understand computer-ESE - it's confusing. I only meant to clear the cache - and accidentally erased my downloads. I tried to look for them in the downloads from my computer, but they are not here.
I am so upset - FF should have a second PDP window or a prompt that warns remind or request the user - if downloads are to clear snow.
Downloads are treated as elements of the history in the library (they show in the history of downloads folder) and if you clear history items while they are lost and cannot be recovered because Firefox keeps not a backup of this type as it is for bookmarks by rotation of backups in the folder bookmarkbackups JSON.
-
U2415, return to the setting factory?
How good and accurate is it? It seems exceptionally well to me naked and untrained. I also Colormunki Display as well. So, I could go further if it would improve even more? I'm not going to lie. I ran Colormunki Display to try. Brightness was set at 29, to 120cd. Factory has been meteoric upstairs. The image seemed a bit improved? How can I explain. Richer looking colors, etc. Placebo effect?
Reference "says" Dell as its monitros U are calibrated to an average error below a value of factory, I think it's 3 deltaE (no claim on which version: 76, 94 or 00)
It is an average error, there are values above and below the average value. For example, white, you can get a white 'color' (255,255,255) far enough away from the D65 (internet & white video standard) to be noticieable, but means error keeps under spec.
A sRGB screen could be ouse out of the box, so white and gray ramp (under no color management environment) shows a neutral color, alias "without color". If you like it... it's an sRGB display, no calibration is required, but the only way to test is to measure.
With widegamut displays as WG CCFL (U241, U2711) or new GB - LED Dells (U2413.. etc), a correct measuring device IS REQUIRED, with all manufacturers (dell, nec) display. Meter better today for this type of photography poster is i1DisplayPro colorimeter. It is by far more accurate than the spectrophotometers Xrite low costs such as i1Pro2 (or lower spec'ed brothers).
A display of colormunki sharing material and accuracy with i1Displaypro, BUT:
-It is 5 x slower
-CANNOT use it to calibrate in-house ALL monitor (dells GB - LED, NEC, Eizos..) because blocked Xrite drivers to do, and these companies use the colorimeter manufacturer drivers.
Xrite - software for Munki Display * s * u * k * s *, but not as good as ArgyllCMS i1Profiler comes with i1Displaypro. My advice with calibratabe screens not hardwre like yours is to use ALWAYS ArgyllCMS and its DispcalGUI interface.
You have an sRGB IPS WLED display, then you MUST USE WLED spectral correction with calibration software. "Spectral correction '' is a way to make precise measurements with this high performance colorimeters and is independent of actual spectral sensitivities of YOUR unit. "Correction of matrix" do not have this feature, so if posible use 'spectral corrections' (BDUS o CCSS files in the Xrite or ArgyllCMS naming convention)
-
Procedure to take income data set and return the result set
Hi all
I have a situation where there will be a 'standard' set of data (source_data below), and I need to get information on outcomes for certain groups of customers (client_data for example). As SQL right it would be very easy (see below) - real world problem is a bit more complicated. However, what I would do is set up a procedure so that I can pass on my data of client variables and it will spit back on a set of data that is identical to the output of the given SQL.
A pointer in the right direction would be appreciated. If I could 'pass customer data' as a string that contains an SQL query, which would be even better, for example
GetResults ("select client_id, min (whatever_date) from some_client_data which...", MyOutputRefCursor?)
Thank youcreate table source_data (client_id integer, tdate date, amount number(6,2)); create table client_data (client_id integer, critical_date date); insert into source_data values(1,to_date('20090104','yyyymmdd'),1000); insert into source_data values(1,to_date('20100104','yyyymmdd'),2000); insert into source_data values(1,to_date('20110104','yyyymmdd'),3000); insert into source_data values(1,to_date('20120104','yyyymmdd'),4000); insert into source_data values(2,to_date('20090104','yyyymmdd'),5000); insert into source_data values(2,to_date('20090604','yyyymmdd'),1000); insert into source_data values(2,to_date('20100104','yyyymmdd'),2000); insert into source_data values(3,to_date('20091004','yyyymmdd'),3000); insert into source_data values(3,to_date('20091104','yyyymmdd'),4000); insert into source_data values(4,to_date('20090104','yyyymmdd'),5000); insert into source_data values(4,to_date('20090604','yyyymmdd'),2000); insert into client_data values(1,to_date('20110104','yyyymmdd')); insert into client_data values(2,to_date('20090604','yyyymmdd')); select c.client_id, sum(CASE WHEN tdate < critical_date then amount else null end) used_before, sum(CASE WHEN tdate >= critical_date then amount else null end) used_after from source_data s inner join client_data c on s.client_id = c.client_id GROUP BY c.client_id;
JonHello
You can do this with a view. Make settings of the view a global temporary table:
create GLOBAL TEMPORARY table client_data ( client_id integer , critical_date date ) ON COMMIT PRESERVE ROWS ;
Then, you can create a view based on your real of the table and the parameter array:
CREATE OR REPLACE VIEW special_clients AS select c.client_id, sum(CASE WHEN tdate < critical_date then amount else null end) used_before, sum(CASE WHEN tdate >= critical_date then amount else null end) used_after from source_data s inner join client_data c on s.client_id = c.client_id GROUP BY c.client_id;
Because the table of parameters is a global temporary table, each session will have its own private copy of the table of parameters and therefore his own private version of the view.
-
How to test a procedure returns the result set
Hello
I have a following code:
{color: #0000ff} create or replace the TYPES of PACKAGING
AS
type cursorType is ref cursor;
end;
create or replace PROCEDURE GetAllCategories (p_cursor in the Types.cursorType)
AS
Start
Open p_cursor for SELECT * CATEGORY;
end; {color}
I would like to test the procedure of * {color: #000000} visualization output resultset {color} *. How can I do with SQL Developer?
In fact, when select RUN in SQL Developer, I got the following code:
DECLARE
P_CURSOR types.cursorType;
BEGIN
GetAllCategories (P_CURSOR = & gt; P_CURSOR);
END;
When I run it, it is successful but there is no result set displayed. However if I execute SELECT * FROM category only in the SQL Editor, I see the result set in the grid. Then where the result set did when he went through the procedure?
Thanks in advance for any help.
Published by: CarbonFiber Sep 22, 2008 20:52Is a simple way with sqlplus
SQL> create or replace package types 2 as 3 type cursortype is ref cursor; 4 end; 5 / Package created. SQL> create or replace procedure getallemp(p_cursor in out types.cursortype ) 2 as 3 begin 4 open p_cursor for select * from emp; 5 end; 6 / Procedure created. SQL> var lcursor refcursor SQL> SQL> exec getallemp(:lcursor) PL/SQL procedure successfully completed. SQL> print lcursor EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO DIV ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- ---------- 7369 SMITH CLERK 7902 17-DEC-80 800 20 10 7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30 10 7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30 10 7566 JONES MANAGER 7839 02-APR-81 2975 20 10 7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30 10 7698 BLAKE MANAGER 7839 01-MAY-81 2850 30 10 7782 CLARK MANAGER 7839 09-JUN-81 2450 10 10 7788 SCOTT ANALYST 7566 19-APR-87 3000 20 10 7839 KING PRESIDENT 17-NOV-81 5000 10 10 7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30 10 7876 ADAMS CLERK 7788 23-MAY-87 1100 20 10 EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO DIV ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- ---------- 7900 JAMES CLERK 7698 03-DEC-81 950 30 10 7902 FORD ANALYST 7566 03-DEC-81 3000 20 10 7934 MILLER CLERK 7782 23-JAN-82 1300 10 10 14 rows selected.
Thank you
Knani. -
my daughter has removed all my desktop icons, how do I return them?
girl removed all my desktop icons some how and I have no idea how to make bak. No one can help?
girl removed all my desktop icons some how and I have no idea how to make bak. No one can help?
==========================================
Something to try...Right-click on your desktop and choose... Rearrange icons by...
and check... Show the desktop icons. -
Returns to original setting after clicking on ok
I adjusted my jpg color for my taste and when you are finished, I click ok and the image comes back to the old image any suggestions?
measures,
color adjustment overview seems goodClick ok
and picture back to what it was without adjustment?no idea how to solve this
Thank you Tj
My point exactly. It is precisely the kind of image where you need to display 100% adjustment to preview.
Any other report view will give you an overview of fake.
My guess is that saturation cannot be much increased here, since every single pixel is already close to full saturation.
-
I followed the instructions to change my settings of cookies, but whenever I click on OK and close out he returns to previous setting recall the story. How can I fix this so that the parameters iI choose will stay?
That's ok.
Firefox shows that the 'use the settings customized for history' if at least a history and cookie setting is not the default to make you aware that the changes have been made.
If all the history settings are the defaults, the custom settings are hidden and see you "conservation rules: (never) don't forget history."
"Never remember history" means that private browsing is active and "Always use private browsing mode" Gets a check mark.The default cookie settings mean that all cookies are enabled.
Have you checked exceptions to make sure you aren't blocking cookies? -
Theme setting changes after the game open.
Hi, im still new in the use of win 7. I wonder why my window keep changing setting of frost to the old version after that I opened some play online (for example country of wonders online) and even I try to customize the choice back windows as given in the old version. the only thing that I can return to my setting is to restart. How to solve this problem.
Hi Selfsial,
Before solve us the problem we need more information on the issue, that you face.
-Since when are you facing this problem?
-Don't you make changes to your computer before this problem started?
-You use Internet Explorer to play games online?
-This happens when you navigate to other weebsites?
I suggest you run the Aero Troubleshooter and check if that helps you solve the problem. Access the link below and follow the steps to troubleshoot Aero in Windows 7.
http://support.Microsoft.com/kb/976170
http://Windows.Microsoft.com/en-us/Windows7/open-the-Aero-Troubleshooter
You can also store of Internet post built in Windows 7 and check to see if it helps you to solve the problem.
To run the Internet Explorer troubleshooter, follow these steps:
1. close all programs.
2. click on start and then click Control Panel.
3. under system and security, click on find and fix problems.
4. in the left pane, click View all.
5. click on Internet Explorer Performance. This opens a new window.
6. click Next.
7. the resolution of the problems run and try to solve all the problems identified automatically. Click Close.
After the store has run successfully, check to see if the problem is resolved.
Also access the link below and follow the steps to solve the problem with Internet Explorer.
http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer
You can also check for any stove display updated driver on the website of the manufacturer of the computer and try to install it and check if it helps you to solve the problem.
Also, you can try to update the drivers to display the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Hope the above information helps.
Thank you and best regards,
Srinivas RMicrosoft technical support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
-
setting up time capsule and express wired after disconnection of the airport
I have a 2 TB Time Capsule and three 3 wired express airport throughout my house. I know that when I added first the cable express, that I had to call apple to change some settings. Now I can't service because they are more than a year and after a recent quick breakdown (two or three) power is the airport expresses link is more and a bunch of my settings seem to have changed on the Time Capsule. Any help would be greatly appreciated. Thank you
If you think there are setting changes, then it would be better to start over.
- First of all, you want to make a 'factory' reset on all of your base stations. This will return them to their "out-of-the-box" configuration Once finished, leave them turned off.
- Then, we put up the Time Capsule (TC). Since it has been reset, it will broadcast a Wi - Fi unsecured network with a network name of something like: Apple network NNNNNN.
- Use AirPort Utility on your iPhone, Mac or PC to configure the TC as a stand-alone wireless router. In other words, configure it to provide a secure WiFi network.
- Once the TC has been configured, verify that the clients on your network can access the Internet with it.
- If he succeeds, proceed to the next step. If this is not the case, stop and post back with your results.
- We will now configure all of your base stations for a roaming network.
- Power-up one of the three stations based AirPort Express.
- Once again, you will need to use AirPort Utility to continue. The utility must now find the Express, and if all goes well, it will offer to the Express allows to extend the TC using Ethernet. It's what you want and just go through the steps automated window 'Installation '. And then on actually.
- Do the same for the other two express base stations.
Maybe you are looking for
-
What happened to all the games?
I currently use Windows 7 Professional upgrade version. So that it can install work I ended up doing a cleaning. When you run windows 7, I found I have not all windows as hearts games, solitaire, spider solitaire. This version comes with these gam
-
T520 sound stops working when HP Monitor is connected
Hi all Any help would be great. I have a new T520 and a new external monitor (HP ZR2440w). As soon as I plug the DisplayPort connection, I lost the sound on my laptop. I also lose sound through the headphone jack. Please help thanks. BR, K
-
Why my computer always say that when I turn it on: "settings.ini is being used by another process. Another close program, click Retry, or click Cancel out side bar.
-
How to connect, based on the previous user name connection?
I have 2 usernames in Windows 7 family? User 1) NY User 2) Tokyo I connect using NY username and logout, then login using the username of Tokyo and reboot window 7 Home, it connections using NY instead of the previous Tokyo connection. Anyone have an
-
VMware Workstation 12 Pro Maximum number of standard error of virtual Macines
I get this error when I open many clones of virtual machine to WIn 2K12R2. now, I opened a new instance of workstation forrun a new VM clones. I don't have this problem in the Workstation 11.0.2