CS4 works only on mac since I've updated to Yosemite, suggestions?

Similar Questions

• Why is my 4K display works only with Mac OS on a mac pro?

  I have a Mac Pro (Darth Vader trash) 2013 edition.  I installed today to MacOS of OS 11.11 El Capitan.

  My monitor AOC 4K (U2879VF) no longer works.  Using a miniDisplay port to display port is to connect to the MacPro.  It worked very well with El Capitan.

  Any thoughts?

  My MP 2013 works very well with Sierra with my Dell UP2414Q via mini displayport > cable displayport

  Have yo reinstalled the cable ends?

  Next:

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

• iMessage works only with cellular data, only in wifi since the last update

  I did a few days ago was last updated (iOS 9.2) and since then I can only send and receive text messages to cellular data no iMessages, I have friends with iPhones that messages are only of text messages sent and received as, even if we have all two iPhones! I get this message when you try to activate iMessage "enable mobile data or use the wifi to configure iMessage.

  I turned on wifi and it accepts the iMessage parameter, but once I go back to the cell data, it shuts down my ability to send iMessages! I'm on a plane, so no credit, turned the phone on and off, have three bars of service (Telstra in Australia)... help anyone? !

  AAnd I tried all the steps on the page provided by Apple iMessage is not available when I try to turn it on?

• HP Officejet Pro L7580 - HP Scan program works only on Mac OS Mavericks 10.9.2

  Hello there Support HP,

  I can not open HP Scan on my Macbook Pro / Mac OS Mavericks 10.9.2.  I have a HP Officejet Pro L7580. Scanning HP program / app just will not open.  I just scan them with my printer, like I did with my other Mac computer that still works on Mountain Lion.

  I would like to reinstall my HP software (HP Scan / to see if that would solve the problem but I can't find the software online.) It's all in your site is the HP-Printer-Driver Update - Patch_v1.0.0, but who has not solved.

  Please let me know if HP has a "HP Scan" for the Mavericks working update for my HP Officejet Pro L7580.

  I would really appreciate it!

  See you soon,.

  TS

  Hi tsmadlucky,

  Thanks for the reply!

  You are the very welcome, I'm glad it's a viable solution for you

  If you don't mind, would you be able to score my post as an acceptable Solution? That way anyone with the same issue can find the thread more easily if it is resolved. If you don't that's fine, that it has never hurts to ask

  Wish you a great week!

• Panel works only on Mac

  I exported a panel with Adobe Extension Builder (Eclipse) and it works fine on my windows (Photoshop 2015.5) machine
  But when I try it on my OSX machine, something breaks down: the CSS is not loaded (background is white, text is returned to the default value), all logic is missing and nothing works. How do I even begin to debug this?

  All the problems have been caused by jQuery.
  For some reason v2.2.4 of it does not work in Photoshop CC 2015.1 on Mac. I went back to an old version: 2.0.2 and now everything works except some minor CSS issues that I have anywhere else.

• Photoshop elements 8 works only with Mac OS 10.9.5

  Hello.

  Photoshop elements 8, used to work before upgrading my operating system Mac OS X 10.9.5. Data 150:30 fault

  Please notify

  Please try error "Licensing has stopped working". Mac OS

• cc libraries works only on mac

  Why cc library does not work on mac?

  Please check: CC help | Creative cloud libraries

• The noise reduction works only on MAC Lightroom 5.4

  I knew that the noise reduction that I apply to my photos is visible in the area of software development. I'm going to the library he disappears and the same thing happen if I export the image in any format.

  I post a screenshot where you can see an example of image with the desired noise reduction applied (right) and the same pictures, as he shows in the field of the library (left). Switching between the two areas (library and develop) results as a toggle of noise reduction.

  Dropbox - example.tiff

  
  

  Is there a way to fix this bug?

  
  

  Thank you.
  

  View generally develop - Fit is more crisp than the library or export, when there was enough noise reduction added to an image to give the impression of sweetness, and people complain that sharpening is not applied; However, in this situation through extreme noise reduction settings, an artificial coarse replaced fine-grained noise that seems to manifest itself differently according to develop Fit, and the complaint is that the library has no NR applied.

  More in detail, there are two questions here, both to the user, LR:

  (1) a user-hope that the No 1:1 to the point zoom is specific about the detailed settings.  It is not the case.  Years, there has been a warning of exclamation point on the detail settings section that says see things only to 1:1.  If a user doesn't see or ignores this warning and then their expectation wrong, as in this situation.

  (2) the detail of Luminance Noise reduction slider has been increased from the default value of 50 up to 100.  This has the effect of converting the sound of grain in an angular course texture, which is easily visible in reduced size except in the view to develop was inaccurate.

  In the next-by-side to zoom 1:1, the left panel is according to the user settings with the Lum-NR-Detail slider to 100, while the right has the cursor Lum-NR-detail set at the default value of 50, with all other parameters of the user remains the same:

  

  I would summarize what happens not as a bug but a different response from the develop-adjustment incorrect attended a different coarseness of the noise which is caused by an extreme environment of the Lum-NR-detail slider.  Since there is no resizing and not sharpness in export settings, I don't think that 1/3 bug has nothing to do with anything.

  It would be nice for the original poster (OP) to describe exactly what is wrong, after knowing the view to develop it is accurate if not seen at the 1:1.

• Output Module (bridge CC) works only on Mac

  As suggested here

  http://helpx.Adobe.com/bridge/KB/install-output-module-bridge-cc.html

  I downloaded and tried to install the bridge CC output Module. I couldn't find the folder "Bridge CC Extensions" only "bridge CC.

  

  I can see the name of output inside the bridge when I try to install but nothing happens when I try to click on it, it's just grayed out

  

  I am using bridge 6.0.0.151

  On OS X 10.8.4

  You may have found the vital link.

  AOM for bridge CC replacement installed with no problems and works perfectly here on OSX 10.8.4 - but I also have CS6 installed on the same machine.

  Try reinstalling CS6 and see if the exit sign of bridge CC works then.

  My guess is that essential to the CC bridge is missing, and suggest that Adobe should release a new update on the Cloud for bridge CC (with a properly integrated AOM incorporated in construction).

  The current idea of offering the ADM as an add-on - it proved to be far too difficult and heavy for the average to manage user.

• Update of player works only on MAC 10.6.8 Flash

  New Adobe Flash loads correctly, says it worked, but I can't find the flash drive and I get the message that I need to load the udpated player in Safari.  I uninstalled the old flash player, restart the computer and downloaded several times, but it still does not recognize the new drive.  Where is it on my MAC?

  sandytul wrote:

  New Adobe Flash loads correctly, says it worked, but I can't find the flash drive and I get the message that I need to load the udpated player in Safari.  I uninstalled the old flash player, restart the computer and downloaded several times, but it still does not recognize the new drive.  Where is it on my MAC?

  Flash Player is just a plug in Safari.  You won't find it in the Applications folder.  Could check you that plug-ins are enabled in the Security tab of the dialog box Preferences of Safari?

• Flash CS4 works only with Windows 7 64-bit and Kaspersky Internet Security

  I have a new computer to core i5 Windows 7 64 bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 answers so that it is completely unusable. Uninstall KIS and it works quite well. I already read on another forum that someone of another encounter the same problem with the same combination of products. Does anyone else have this problem amd If Yes, how do you solve? I posted on the forum of Kaspersky without solution so far.

  Norton works OK with Windows 7 (64) and CS4?

  Your chance.  After a week of research I found someone who has thought about it.  Apparently his self-defense of Kaspersky which is causing the problem.  Under options disable control external sevice disable.  For me, that did the trick.  If it does not for you also try to disable self-defense under both options.  Once I did it was moving smooth again.

• Object with actionscript works only on Mac

  I am quite experienced with Dreamweaver and Fireworks, but a newbie to Flash. My first attempt at using the Flash is actually a modification of the tutorial that comes with Flash for the creation of a FMA. You can see mine at http://www.perfectfitweb.com/testing/lightimages/www/lightimages.html. I used the actionscript code in the tutorial and modified to meet my needs. It works perfectly on my machines Windows XP and Windows 98 using IE 6 and Firefox 1.5.0.1. Unfortunately, it does work on my (annoying) client machine. It is on a Mac and when I watched with him, the first image would show upward, but clicking on the next button would do nothing. I put in the Flash detection to provide replacements if it was an older version of Flash or scripts were turned off. After trying this, the client has sent to me, "I still could not make it work." I thought it might have something to do with the Flash Player, so I reinstalled the latest version, but it still does not work with either IE (v 5.2) or Safari (v 2.0.4). I also tried with Firefox (v 1.5.0.6), but the text appeared (no window at all). »
  
  Could someone out there try it on your Mac, tell me if it works, and give me ideas, why won't work for him?

  Problem solved! I found a friend who let me use his Mac for a few hours and I was able to isolate the problem. I had a few CSS relative positioning and z-index that did not just Mac. I took that and now it works fine. Thank you for your help. Sorry it turned out not to be a problem of Flash at all.

• DeskJet 2135:2135 works only on mac

  Hello, I just bought my first hp and the mac does not prinding nothing.

  Welcome to the community @vaggos HP

  I read about the problems you're having with printing of Sierra. I checked the drivers for your printer, and there is no full driver for Sierra, that is probably why there is a problem with the use of the printer.

  You can try to run an update from Apple to install the printer to print, and then try again.

  Here is a link where you can check to see when / if the drivers are available for your printer: drivers and downloads

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• AiO 4215 scanner works only on Mac 10.6.8

  I've looked at a dozen of foum different messages and downloaded three different drivers... yet, when I hit the scan button, it tells me that I don't have the necessary software.  Recent messages said to unintstall HP/Hewlett-Packard software, but there is no uninstall file or app anywhere on my mac pro book.

  technical support HP wanted to charge me $149 for 'repair my computer.'  For a printer $ 80, this seems to be a criminal offense...

  I'm totally frustrated...

  Hi abombeck,

  What you need to do is click on software updates. Follow the steps below to get the current Apple update driver.

  1. Click on the menu Apple ( ), and then click software update . Software update checks available updates and updates the database that your Mac uses to determine the available printing software.

• Creating cloud works only on mac

  I have a new plan of cloud creative and downloaded lightroom, but it's not the full program and it does not work. I have no explanation for this problem, if someone can give a help? Thank you very much

  (1) right click on the Finder on dock icon and select the option "Go - To Folder."
  (2) you will get a text box, type in below mentioned command and then press 'return '.

  / etc

  (3) it will open the etc folder, look for file named "hosts" and the same screenshot of office.

  (4) double click on the Hosts file, it will open it with TextEdit.

  Let me know if you see any Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?