CS5, text on a path in a circle, gets moved around by reducing the whole image in size.

Similar Questions

• Adobe CS5 yet - should reduce the timeline image to fit screen

  Hi and thanks in advance for your help.

  I have 6 hours of talking heads at a conference not 1920x1080P.  As I make DVDs of video I find much of the image is 'cut' or outside the frame when played on a TV.  I play on a 65-inch DLP wide screen that is 'enhanced' 1080 p, 32 inch widescreen LCD that is not "upscaled" and a DVD player portable and all have the same effects.

  Each speaker is on a separate timeline.  I have change the timing of output to 90% of the height and 80% of the width to retain the greater part of the image (and their thin a little) when the DVD is played.  I have pre-made of timelimes to 720 x 480. MP4 files and import those into still make the DVD.

  If I do not reduce the percent image in the timeline, I get a fat looking for speaker with a lot of the image outside of the visible area.  Am I to compensate for something I'm doing wrong or is - this typical?  I understand the output for TV a visible 'safe' areas, but I thought which did apply to the new TV technology during DVD playback.

  I appreciate any help or comments, you can offer.

  Thank you

  Mel

  When you export mpeg dvd actually get you TWO files, a video and an audio

  You load both in still

• text on a path between each letter in XML svg

  Whenever I have to make a bow and put the text on it via the type on a path tool, then Center it, it looks perfect. But when I save it as an svg, and then re - open it, it says: "text on path will be flattened," change the code svg and split the letters as well as the smoothing of text curve. It is a problem because I hang in the id to dynamically change the text on my site. It also seems that if I do the export option, the code is also as an example #2.

  Here's the code before I open it new.

  <? XML version = "1.0" encoding = "utf-8"? >

  <!-generator: Adobe Illustrator SVG Export plugin 19.2.1,. The SVG Version: 6.00 Build 0)->

  " < version svg = '1.1' id = 'Layer_1' xmlns =" http://www.w3.org/2000/SVG "xmlns:xlink =" " http://www.w3.org/1999/xlink "x ="0px"y ="0px" "

  "viewBox =" "0 0 307,5 106.9 ' enable-background =" new 0 0 307,5 106.9 "XML: Space ="preserve">

  < path id = filling "SVGID_x5F_1_x5F_" = "none" d="M21,70.6c0,0,53.5-17.2,132.7-17.2S295,70.6,295,70.6"/ >

  < text > < textPath XLink = "#SVGID_x5F_1_x5F_' startOffset="11.377% ">"

  < tspan font-family = the size of the font "" TimesNewRomanPS-BoldMT"" = "36px" >Lesson 1< / tspan > < / textPath >

  < / text >

  < / svg >

  Here it is after I open it again.

  <? XML version = "1.0" encoding = "utf-8"? >

  <!-generator: Adobe Illustrator SVG Export plugin 19.2.1,. The SVG Version: 6.00 Build 0)->

  " < version svg = '1.1' id = 'Layer_1' xmlns =" http://www.w3.org/2000/SVG "xmlns:xlink =" " http://www.w3.org/1999/xlink "x ="0px"y ="0px" "

  "viewBox =" "0 0 307,5 106.9 ' enable-background =" new 0 0 307,5 106.9 "XML: Space ="preserve">

  < path id = filling "SVGID_x5F_1_x5F_" = "none" STROKE = "#2100FF" stroke-miterlimit = "10" d = "M16.7, 79.2c0, 0, 53, 5 - 17.2, 132.7 - 17.2"

  S141.3,17.2,141.3,17.2"/ >

  < text transformation = "matrix (1 0 0 1 93,6936 64.8429) ' font family = the size of the font"' ArialMT' "="12px"> < / text >" "

  < text transformation = "matrix (1 0 0 1 97,0006 64.3823) ' font family = the size of the font""TimesNewRomanPS-BoldMT" "="36px"> L < / text >"

  < text transformation = "matrix (1 0 0 1 120,953 62.681) ' font family = the size of the font""TimesNewRomanPS-BoldMT" "="36px"> e < / text >"

  < text transformation = "matrix (1 0 0 1 136,9217 62.0974) ' font family = the size of the font""TimesNewRomanPS-BoldMT" "="36px"> s < / text >"

  < text transformation = "matrix (1 0 0 1 150,9316 61.9581) ' font family = the size of the font""TimesNewRomanPS-BoldMT" "="36px"> s < / text >"

  < text transformation = "matrix (1 0 0 1 164,9415 62.1477) ' font family = the size of the font""TimesNewRomanPS-BoldMT" "="36px"> o < / text >"

  < text transformation = "matrix (1 0 0 1 182,9271 62.914) ' font family = the size of the font""TimesNewRomanPS-BoldMT" "="36px"> n < / text >"

  < text transformation = "matrix (1 0 0 1 202,8869 64.4839) ' font family = the size of the font""TimesNewRomanPS-BoldMT" "="36px"> < / text >"

  < text transformation = "matrix (1 0 0 1 211,8488 65.3236) ' font family = the size of the font""TimesNewRomanPS-BoldMT" "="36px"> 1 < / text >"

  < text font family = the size of the font "' ArialMT'" = "12px" > < / text >

  < / svg >

  As I said back and forth SVG is a problem.

  Some problems occur when you save the file,

  others may occur when you treat more SVG code

  then Illustrator don't even fully understand the SVG code, he wrote.

  So save a file HAVE for editing

  and a SVG for download on the web.

• Trial has just started... There is no button text only a text on a path tool... How to make a text box?

  Trial has just started... There is no button text only a text on a path tool... How to make a text box?

  The text button is under the text on a path button. Click and hold and it should reveal the buttons.

• Reverse the flow of the text along a path?

  I have created a path to the oval text using a shape tool.  When I type along the top of the track, the lettering is flowing as it should.  When I type the lower part, it is upside down and backwards because the stream is the same as the top.  How to reverse the flow of the text at the bottom is the place and reads left to right?  Can't find info on how to reverse the direction of flow.  Thanks in advance for your suggestions.

  pjcaver

  OK, finally successful: Type around the top half above the lettering.  Reposition the tool text down and continue typing, even if upside down.  Select the path Selection tool, drag the text down to the INSIDE of the oval that will right the text correctly.  Select the text that you want to go then it appears highlighted, go to the window "Select the vertical offset" (not the slider to the left of it) and press down as many times until it is aligned with the bottom of the oval, in my case about - 5.  For larger slices of movement, hold the SHIFT key while pressing the down arrow key to count 10 movements.  The upper part of the lettering will line up correctly with the oval shape.

  Thank you, Trevor, for the right direction to follow.

  pjcaver

  

  

• Illustrator text on a path with a gradient from top to bottom?

  Try to get a gradient to text on a wavy path.

  I found problems / very similar answers, but not quite this one...

  I'm creating a poster. There the text of PROGRAM of COMPOSTING MUNICIPAL BACKYARD (2 lines, backyard CITED above, then of COMPOSTING PROGRAM below)

  The text has a light brown dark brown gradient running up and down on the whole text.

  The text is on a green background.

  They now want the green background to be a banner wave, and the text is inside the banner and follow the wavy shape of the banner.

  And of course that the gradient must follow the wavy form of the text, so the tops of letters are the same light brown and the bottom of all the letters are the same despite Brown, dark letters are flowing up and down along the wavy shape of the banner.

  I received my text as a result of the wave of the banner, and I have a version with the text now changed to the railways (and a composite path because it's two lines), but of course when I apply the gradient, the gradient runs directly through the letters instead of follow the wave.

  Is there a way to do this? I found a method of creating a mixture and stroke following forms apply it as an accident, but not what I have to do here.

  Thank you!

  Quoz,

  I think it is easier and better use a combination of follows, with the two curved lines of direct Type (especially if they have Anchor Points (numbers of) correspondent):

  (A) direct select both the path of nofill who wear both sets of Type, then Ctrl / Cmd + X + B to bring to the back, then give them a fill and lock the Type of path together.

  (B) attach the ends of the two lines so that they form a something like a distorted rectangle (you can select directly the end corresponding units);

  (1) object > path > offset path by the distance down to the top of the text up/down the low text, this should give you a closed path extra with straight segments end;

  ((2) directly select the straight end of the segments and remove them with the winding of B rectangle), this should give you a line of top and a bottom line.

  (3) give up and down the color that you want at the top of the letters above and below the letters down, the lines then object > mix > blend Options, with the smooth settings and align on the track, this should give you the transition of color behind the original lines;

  (4) to unlock, then select the two curved lines of the Type and the object > compound path > make if not already;

  (5) select the Type (Path) alive and the color transition and object > clipping mask > make.

• Issue of brush when going around a form of path... circle which distort

  Hello

  I have a round object of Photoshop (Pierre..) I need to go on a path in Illustrator.I to realize that I can not do this with a raster object, at least from what I read, so I used the trace image feature and then I can drag the circular in the Panel room shapes and create a blur brush or pattern to go my way through.

  Problem is that if the path is an oval, circles will change the shape and get distorted. How can I keep the circles to change shape? Is there a way to do this? Or, is there a way to just bring an element of Photoshop and do align on a path?

  Thank you

  Babs

  HI Jet,

  It seems to have worked with point clouds... I think I always avoid it, cause duplication problems... But I think I can realize this that my lack of customers to tempt me with their stuff with this method. I begin with an element of Photoshop, which looks like a stone, with a few gradations in there etc, and need to trace it image and then try to do the scatter and see if it works...

  Thank you guys so much....

  Will test the good true tomorrow!

  Babs

  

• Text along a path.

  I'm working on my computer at home who has Photoshop 7 on it. I'm doing the text to follow a path created with the pen tool.

  (1) select the pen be traced is selected.

  (2) attract three points on a path.

  (3) select the text tool

  (4) stationary flight path tool... does not pass to the inclined bar I (stay in horizontal text mode).

  This feature is not available in the PS7?

  Thank you.

  RG

  N ° text on a path is out in Photoshop CS.

• Is it possible to search for "text on a path?

  I need to be able to search for all occurrences of the text on a path. How do I do that?

  This should give you a report from where you have paths to text in your document as a whole:

  var doc = app.documents[0];
  var foundPages = [];
  var foundItems = 0;
  for(var idx=0;idx0){
        foundPages.push(doc.pages[idx].name);
        foundItems++;
      }
    }
  }
  if(foundItems>0){
    var newDoc = app.documents.add();
    var frame = newDoc.pages[0].textFrames.add();
    frame.geometricBounds = GetLiveBounds(newDoc.pages[0]);
    frame.contents = String(foundItems)+"  text paths found on pages:\r" + foundPages.join(", ");
  } else {
    alert("No Text Paths Found!");
  }
  
  function GetLiveBounds (page) {
    var bounds = page.bounds;
    return [
      page.marginPreferences.top,
      page.side == PageSideOptions.leftHand ? bounds[1] + page.marginPreferences.right : bounds[1] + page.marginPreferences.left,
      bounds[2] - page.marginPreferences.bottom,
      page.side == PageSideOptions.leftHand ? bounds[3] - page.marginPreferences.left : bounds[3] - page.marginPreferences.right
    ]
  }
  

• Text on a path not to export in PDF format

  This announcement, I'm just in case there is an easy solution, but I suspect that the architecture of a particular CS4 file is damaged in a weird way that only affects exporters text on a path in PDF format.

  Most of the examples of text on a path in this document will not export to PDF, and I have a suspicion that the problem may occur only after a certain number of page - but that is not confirmed. Tried anything that I don't gets me the text in an exported PDF, and that includes almost all the possible combinations of the export settings by changing the layers, masking layers, restoration OSX and reloading CS4.

  One thing can work: as a test, when I moved a page to a new document, text on a traced is exportable. I didn't have no more in that direction immediately, in the case where there is a difficulty that is easier than moving 813 pages at once, which crashes CS4 when I tried it.

  Any suggestions?

  Under the banner of 'better late than never', this bug is now fixed in the 6.0.4 update.

  Bob

• ID CS4 - text on a path does not print

  Hello experts,

  I'm nervous of preparation very big book for printing (Bible, 1300 + pages, very complicated layout). Everything was done in ID CS2 and several reprints have been OK - now I jumped to CS4 converted the book and that's problem is here. Text placed on the upper edge of the frame (through type on a path tool) disappears in PDF (snapshot included) resulting. However, the text in the frame itself is OK. Problem is that the path is a part of the textflow, so it cannot be easily replaced. It was absolutely impossible (for me) to force the ID to print the pages correctly (print or export worked). I reinstalled everything suite CS4 - and now about 75% of cases are OK the rest once again not. (before reinstalling nothing of the text was OK...)

  I can't change the layout or positioning of executives because ID will begin to recompose the text (works by this composer CS4 sometimes differently compared to CS2 ) is very risky because of the necessary additional proofreading. I can't yet go back to CS2 document - tried by INX double conversion - failed - text mentioned above is still invisible. And the original document from CS2 cannot be used because of the hundreds of corrections for new edition that all of them were made in CS4. So now what to do - I would really appreciate help from experts.

  Vlad Jurco

  Very well. I got the file and looked it over. Here are my findings:

  There seems to be an obscure bug in InDesign.

  Here's what happens:

  Vlad sent me a 178 page document. Most of the text flow between

  single and multiple blocks of text column, with under section headers

  text on the path of several blocks of text column beneath them. The

  first of all, 89 pages exported correctly. All pages from the 90th

  page exported without text on the path.

  (1) it does not appear that corruption of the text boxes. I created

  new images with text on path and text exported still hurt.

  (2) it doesn't have to do with the length of history. I have

  divide history in the Middle, and the same text was still missing on

  Export

  (3) export (text marked, etc.) Changing settings do not seem to

  have an effect.

  (4) the export of parts did not help.

  (4) after the split of the text, I removed all pages before the

  problematic page and the missing text was all there on the export.

  I conclude that this is a bug involving

  (a) text on a path

  (b) that belongs to the text Threading

  (c) on page 90 and on.

  If anyone is interested in building a new doc to confirm this; be my

  Comments!

  I see two ways to solve the problem.

  (1) divide the documents all less than 90 pages.

  (2) cut the text of the text on the path and paste it into the new text frames

  (while removing the paths of the Threading).

  Since there are a lot of Mid-page overlap heads; If you were building

  This from scratch, I would recommend using column flow here: http://www.in-tools.com/plugin.php?p=4

  Substances

  http://www.in-tools.com

• CS5 text wrapping moves centered headers

  Hi all

  I have a presentation of three columns with illustrations spots in gutters. They have a round text applied to PT wrapping. 6 centered at different positions in each column are headers or different widths. Headers are not the range of the text wrapping, but they are moved by the placed images. This makes misaligned headers and the page looks bad. Can't find a work around that. I've included a screenshot. Take a look at the word in italics 'Thursday' to see what the problem is.

  Thanks in advance!

  European Union.

  

  Center the text is going to happen with the scarf to stay centered in the 'available' space, just like the text aligned left or right will move if the scarf is on the edge of the frame. You could left align the text and add a tab centered before the words, maybe or customize the limit envelope, so this does not affect this line.

• Problem with a circle-shaped border around a button

  Hello
  
  what I want to achieve is a border circle of a button, or better said, a button-shaped circle. I want to do this using CSS as much as possible. That's what I have regarding:
  
  my css file:
  

  .button {
      -fx-text-fill: dimgrey;
      -fx-background-color: white;
      -fx-border-radius: 15;
      -fx-border-width: 2;
      -fx-border-color: dimgrey;
      -fx-padding: 0;
      -fx-font-family: "MyFont";
      -fx-font-size: 30;
  }

  In java code, I set the height of the button to 30 px:

  btn.setPrefHeight(30);

  He would work in HTML + CSS, but it does not work here. Here is the link to a picture of the result:
  
  https://DL.dropbox.com/u/1030857/x.PNG
  
  Any help will be appreciated! Thank you!
  
  Published by: Jack on August 17, 2012 13:30

  I have created an example of solution here: https://gist.github.com/3383311

  I think that my sample solution is too complicated, so someone can probably find a way easier to get what you want.
  If it were me, I'd be inclined to define a graph of a library icon on the button leave rather than using the text + css. Or maybe use a path to draw on the button image.

  In general, although the syntax and elements are similar to css html, do not expect javafx css behaves exactly like html css, but then you found out that already ;-)

• Help on resizing text boxes and the General image techniques

  Using CS2.

  I have two fundamental questions.  We have to do to get the best images to vector (with text) that I can for placement in InDesign documents.  The other relates to the specificity of work with text in FW boxes.

  The easiest way for me to produce vector images has been using PowerPoint.  I do all the graphic work, and then save it as a gif file.  I don't and then cropping in a graphic (Irfanview, PS) tool insert or place the image.  As long as there is no resizing, things work fine.  I do not know how things like IPR are controlled using this technique but I'm assuming that would be also with the graphical tool.  I know that Irfanview allows the CIO to clarify when resizing.

  The problem starts to appear when the gif object is resized.  Things are distorted and I lose the freshness of the image content.  I'm certainly not an expert on the graphics but I thought either, there is no resizing (just a cropping) or 2) to work in a tool such as FW where (I guess) so I need to make 1) actual size charts PP size of the final image placed there are better abilities to resize the vector images.  My feeling (again, not an expert) is that converts the process I use for vector graphics in PP to a bitmap image in the gif and resizing does not work as well for bitmap images with respect to vector objects.  Don't I have that right?

  Go to question 2:

  Can the text boxes be resized in FW without distorting the text?  Their size is visible when initially drasing them?  Maybe spoiled by PowerPoint, I like to define the width of the vector objects (e.g. rectangle) and the width of the text it will fill at the same size.  (I know that PP has the opportunity to put borders on text boxes, but when you work in FW I need to work with 2 objects, the rectangle and the text box).  I have a wide 81px rectangle.  Can I set a text box to 81px wide without distorting the text?

  I tend to want to control the dimensions of the real object so I can get good spacial alignment.  For example, I tend to set the width of a text to an odd number of px object so that any line that comes out of the text object coincide well with the text.  I must admit that it was perhaps time for me to use a different technique in FW (for example an alignment more than objects multiple vs knowing dimensions and locations seting).  My approach does need improvement?

  Thanks for the tips

  Tom

  As I wean out of PP I started watching FW and Illustrator (I have both).  I did a logo or two in FW and have used it to build simple web graphics (e.g. buttons, menus).  It can, I believe, be a little more complicated than what I need in this case.

  Given that the PP is not a graphics program, its drawing capabilities are very limited. As a result, all graphics applications will have many more features that you are used to see and more that you need for a project.

  I did a little experiment with Illustrator and my first impression is that it will work better for me for this job.  It seems a little more intuitive.

  Is a general rule to use FW for graphics for the web and Illustrator of what I was doing in PP?

  Your suggested orientation is good. Also note that if you make a logo or a vector graphic in Illustrator (saved as .ai format), you can import into Fireworks and work with it as a vector object it. FW can import and use, simply create no, files and .ai objects.

  FW has some vector tools, they are hidden under window > others > Path. Because the FW is intended to produce Web graphics, it is a hybrid, capable of vector and image/photo editing application. Given that she has some of both, it is not necessarily what is Illustrator, nor all that Photoshop has. It has most of the features of the two programs, as long as the feature is useful for a Web graphics designer. For pure photo retouching Photoshop has the edge; for pure illustration, Illustrator has the edge. Both Photoshop and Illustrator supports profiles of colors and other important features for printing which is not the fireworks. All are good programs, but there are reasons to prefer one over the other according to the type of graphics, you need to create or work with and what is your intended use of the work. (But none of them will be greater than PowerPoint!)

  I'm not sure I can unravel the mystery with the resizing of text box.  I suspect theres an option is selected.  Knowing that it's possible, it's enough for me to do some homework.

  Maybe... don't think that text boxes at all. You have text objects. The object has a bounding box which is determined by the underlying definition of the police, but he is not in an text box. (Sometimes swooshs goes beyond area of definition of a character in the police, but that's another question). The bounding box of the text object is similar to the of a circle or a star or an irregular shape bounding box. There is a reference to the dimensions box, but the text is not inside some other independent container.

  To resize it, select the text object and change the font size using the Properties palette or using the tool of the ladder hanging out on a corner of the hierarchy (different from the bounding box, and I don't know why, sorry).

  I think that with Illustrator, you can set text (or other) boxes and fill them with text. * Research * Oh... Like these: http://school.tatoland.com/illustrator/aitype.html

  Cheers!

  Lorraine

• CS5.5 will not - install "eject the disk image.

  I'm trying to reinstall InDesign.  But get a error message "Install can not be opened. You must eject disk image. »

  I saw this message on a few forums, but no solution has been given.

  iMac OSX 10.7.5

  I don't have a problem with other facilities, just this one.  For example, I ran the CS5.5 "patch", and worked well (but it had nothing to patch on, of course).

  History:

  I did a reinstall of CS5.5.  But he had a few more questions (slow), so I thought I would do a complete uninstall-reinstall.  And now I get the above error message.

  Immediately before this problem, I had already done a CS5.5 installation without any problem.  It was only after I did the uninstall, begun by installation problems.

  I also tried a 'own CC', as shown in the manual, but there is nothing to clean up.

  Another forum said trying to install OSX 10.7.5, but I'm already on OSX 10.7.5.

  I'll try to re - download the CS5.5 installation file again.  But as it takes 3 hours to download, I'll go to bed and let it download and try to install it in the morning.

  BTW:

  Already checked disk permissions and disk repair - no problem.

  Already verified security clearances and it is on 'download from anywhere '.

  R

  Hello.

  Solved my problem.  The previous suggestion of the fix was correct - and you're doing what he 'Terminal Mode' which is located in the user library.  Simply type:

  xattr - /Users/***/Downloads/InDesign_7_5_LS1.dmg c (make sure it is the correct path to the Setup file correct you have problems with).

  I did it twice, as once did nothing (spelling?).

  In any case, now Adobe InDesign is fortunately installation.

  Happy Days... ;-)