Current date dynamically entered the field of text that the user enters additional text in the same field.

Similar Questions

• Bind several web service data controls on the same page

  Hello
  JDev version: 11.1.1.6.0
  I using SOAP web services. I have the following usage:
  I have the data control for the web service, that records the values entered into the form. I created the entry form using the data control (DC1).
  There is an input field [T1], on the tab, I need to fill an another text field, for which the data is returned to an another web service (DC2) data control.
  For the same input text [T1] on the tab out, I need fill in the object list in the component selectonechoice, for which the data is returned to an another web service (DC3) data control.
  
  Is it possible to use bind several data controls on the same page to reach the use case?
  However, I want to avoid the use of managed bean. Is it possible to do this?
  
  Concerning
  Fabiola

  Hello

  I can make the case to use even without the use of the managed bean?

  Yes, although the managed bean solution seems reasonable to me.

  Difficulties are

  + 1) REQ1 and REQ2 are the parameters that is common to both 1 and 3 services. +

  Text fields that provide arguments to a method are related to an input variable (file PageDef has an iterator variable in the executable section). A variable can be referenced from method arguments

  + 2) REQ1 is the parameter that is common to both 2 and 3 services. +

  Identical to 1. Create a setting for service 2 and map variables in the arguments of the method of service 3

  + 3) Service3 needs all REQ1, REQ2, REQ3, and REQ4 parameters as parameters to save the data. +

  As said, fields can be referenced from variables, dependent, the linking of the attribute fields (as I guess it is a return value in the bound field)

  There are problems of links as the same setting is available between several departments.

  It's new to me

  Is it possible to solve these problems of binding addresses?

  Yes. Make sure however that WS DC iterators you see in PageDef have their property Refresh ifNeeded for the refreshment of the bound field work properly

  Frank

• install esxi 4.1 and the data store on the same server

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL says:

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL,

  Can you give us more details about your current environment?  What is the size and the data store space used? Do you have any storage of additional network attached to the host (for backup purposes)?

  My assumptions of your post do you have 1 stand-alone host with ESXi 4.1 aready installed and you also have a local data store on the same host, but you want to re - install ESXi 4.1 while keeping the contents fo the data store.  Is this correct?

• Migration of all the catalog items to a different data store in the same storage profiles

  Hello

  is any possibility to migrate everything in the catalog (time and iso files) to a different data store that has the same profile (Silver) storage group?  Because I have 2 groups of data store with the same profile of storage (Silver) and I want to delete one of this cluster.

  I found this kb: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2058094 but it speaks solely of media files of migration between different storage profiles.

  Have vCD 5.6.4

  You happen to use rapid Provisioning?  This is probably the only problem I can think of.

  Environments that have no linked Clones or shadows created from them, you can just Storage vMotion them between the same storage policy data warehouses.  Just make sure that the data store or a store of data clusters are visible in vCloud Director first of all in the framework of this storage policy.

  When you use linked clones, I don't remember the exact process... I think that I have in my office somewhere (I'm at home now).

• Recover/place current date-time in the text box

  Hello, I wonder if someone has experimented with dynamically retrieve the current computer date/time and place this information in a text box? Looks like a simple enough action, but I can't find any documentation related this topic. I suspect that this method of appeal and retrieval behavior could serve as unexpectedly in many situations for many people!

  -joel

  You don't need a script to do this.  In the Type menu, there is a submenu "text... Variables. ».  This will set text variables and store them in text boxes.  There is a predefined variable called "Release Date", which will display the date current (MM/DD/YY) when a PDF file is output.  If you want to display the time, under "text... Variables. ', go to 'Define'... ", and you can define your own.  Under 'Type', select the release date and add any desired variable data.  The format of date and time should look like this:

  HH: mm: MM/DD/YY

  I found that only update text Variables in the display very consistantly, but I just tested it, and whatever the value is, the PDF output has time and date.

  If you want to control the text with javaScript variables, see the classes of TextVariableInstance (s) and TextVariable (s).

  As a side note, the text variables work very well if you want the date and time, page, etc., but I really wish they would add a little more features, especially with things like name of separation, color profile, and PDF output profile.  It would be a huge timesaver that all of this type of metadata inserted easily.

• How to insert the current date in a hidden field?

  I have a form of update of personal information.  There is a field called 'dateupdated' that I would have on the form as a hiddent field that gets automatically the most recent date (now) in the table.

  No idea how I can configure the hiddden in the current date field?

  Thank you, Dennis

  Its good to know the TIMESTAMP data type.

  I do it in a different way.

  Add this code in the value of the hidden field date

• 2 blocks from the database data insert into the same base table?

  Hello
  I have the C_NEW canvas. On this canvas, elements of 3 blocks are usable by the user.
  
  1 block NEW_HEAD: 3 Articles say X 1, X 2, X 3
  2 block NEW: record multi say Y1 thru Y10 text fields. Also a scroll bar.
  3 block NEW_ACTION: 6 buttons say B1 to B6 (one of them is N_OK which matches the element in question)
  
  two NEW, NEW_HEAD blocks are blocks of db and have the same basic so-called BT table when users click on the N_OK (after filling the data in the NEW_HEAD and then NEW block in that order), I need the data between the two the NEW, NEW_HEAD to enter the BT. currently only the NEW data goes to BT. in the BT table fields that correspond to the fields X 1, X 2, X 3 in the NEW_HEAD remains null after clicking on the N_OK button. I put commit_form in the N_OK code, since the blocks are blocks of db (as suggested by the people, it is easier to issue a commit_form that a lot more work in writing my own SQL).
  
  How can I achieve this?
  
  Thank you
  Chiru

  There is therefore no N_LC_DMG_ALLOW column in the table, that the block is the result. You must set the property "Section of the database" not for all the elements that are not of the columns in your database table.

  And when an error occurs, then the full treatment stops, so its clear that there is no inserted record.

• NEITHER 9207 reading current and voltage at the same time channels

  I have a cDAQ-9178 chassis USB-three cards NI 9217 RTD, three cards 9263 0 - 10V and one the output OR 9207 16 channels analog card. What I m trying with this kind of things, is to read all the analog input channels (information of transducer, temperature, pressure, etc.) and adjust my controls to process with the analog output channels.

  My problem at the moment is the following:

  When I create tasks with DAQmx VI:s, how to create a task that reads current and voltage on the 9207 channels at the same time?

  When I created a task for RTD-channels (16), a task for the outputs analog 0 - 10V (12), a task for the analog input 4-20mA (8) and a single task analog 0 - 10V input (8) I get an error-50103. I think it s because the tasks of current entry and voltagge are trying to use the same CAD at the same time and LabVIEW informs that "The specified resource is reserved. Tasks are to leave so that the analog output task starts first, then I merged all clusters of the error and the rest of the task are started by an order to current input-> input-> RTD input voltage. I get this error after the current enter task started and enter voltage task begins.

  Because I m new on the LabVIEW and stuck in that time, I wanted to try the forum to find answers. I tried to find if someone else was having the same kind of problem, but with a quick search, there was none. I m in a bit of hurry, so I apologize if West a subject with a happy for that and I missed too much according to me.

  Really, the best way to do it is just adding 8 channels of voltage at a task, then 8-channel current, somewhat like this:

  

  Then spread over different channels when you read later:

  

  It should run without error.  It always is multiplexed to sampling, but it will be much faster to create two separate tasks.  There will be between 2ms (mode high speed) and 52ms (mode high resolution) between each playback channels, but it will still be much faster than the permutation of the tasks.

• The migration of the VM from ESX 3.5 data center to data center inside the same building Vsphere

  Hi experts,

  Currently, we have 5 servers ESX 3.5 and a San in a shelter in the United Kingdom. This kit is now over 3 years old and the company replaces the complete kit with a new SAN, new servers and Vsphere 4.0.

  We have the opportunity to get new equipment to the top and running in the same shelter in Britain and are therefore able to run cable network between the two cabins if necessary.

  What is the best way to migrate existing virtual machines from the old environment running to the new environment running Vsphere ESX 3.5? As mentioned only the two cabins will run in the same shelter so nothing needs to go on a WAN link.

  IM keen to not load the machines on a USB key and move like that if I can help it. It appears from the research you cannot VMotion from one datacenter to another data center, however I can Storage VMotion between the two by using a method of migration cold?

  Any help will be appreciated, thanks

  agile1983 wrote:

  Disconnect a host ESX to the old environment, connect it to the new environment. (this means now that the old host as part of the new vsphere cluster can still see the old SAN?)  Then use this host as the link between the two San as you can see both of them?)

  Yes, presentation of the old drive will still be available on the assumption that it was not presentation of your San.  You can use a transit Host, which means that all the LUNS of the old environment and the new are presented to this host, but there will be a migration in a timely.  You have to vMotion invited to this host, unplug off the old environment and then in the new sVMotion (move the host and data store) to the new.  When this is done, unplug this transit host environment and add in the old, vmotion... Rinse and repeat.   Ideally, a presentation of the new LUNS to the old ESX host would be much faster.  In this way, you can bring your old environment together in the new. Make sense?

  When I disconnect and reconnect the old host to the new environment, which also happens to the virtual machines on this host? I need to move temporarily turned off?

  all comments will continue to operate without interruption.

• Print data online in the same column

  Hello
  
  In a tabular report I want to print a column (for example: Description,) in two lines in the same cell.
  Because the description is too long. Is this possible in report 6i. Or any other solution for this?
  
  Please answer.

  Hello
  For the Description of the value vertical elasticity EXPAND field. Then it will automatically adjust based on the data.

  -Clément

• What is READ the array returned by the DAQmx meter? How can I know the two functions DAQmx READ data stream in the same WHILE loop?

  I have a question about the order of execution.  In the WHILE loop, I have two things to measure, period and tension using the DAQmx READ functions for voltage and the meter.  In the end, I want to collect these data as points almost simultaneously as possible, as a pair and then send them together to another piece of code (not shown here) which them will result in some sort of command for an engine.  It would be run, and then I want to perceive the tension and the period at a time later and do the same thing.

  (1.) I'm a little confused on what the meter of the READ function is back because it's a table.  What is a picture of?  I thought that it was up to the value of the individual periods between rising edges.  The output of the counter 1 DBL d's a table. How many elements in this table, and what determines the size of this table?  Are the elements of the array the individual delays between the edges?  How many values are stored in the array by executing?   We take the AVERAGE of the last 15 items, but do not know if we are throwing some of the data or what.  How to understand the composition of this painting?  How can I change the composition of this painting?  Is it possible to measure only one period at a time, for example the time between TWO edges?

  2.) Will this WHILE loop execute as it gathers tension and a "period table ' (remains to be understood by me) by TIME running in a loop?  In particular, we want that the value of the tension associated with the value of the AVERAGE of the period "array", so we can use two data items to create orders of next control every time that the two values are reported.  The structure for the delivery of vi will be attached data in pairs like this?  I understand that one of the READING functions run not before the other function of READING in the WHILE loop.  I want that the period "means" and "strain (Volt) collected at the same pace. This vi will he?

  Thank you

  Dave

  Hi David,

  I suggest including the DAQmx Start Task function. If it does not start before the loop, it starts the loop and work very well, but it is not as fast and efficient. In the model of task status, task wiill go to run the checked each iteration of the loop and then back the time checked running when it restarts.

  The status of the task model: http://zone.ni.com/reference/en-XX/help/370466V-01/mxcncpts/taskstatemodel/

  Kind regards

  Jason D

  Technical sales engineer

  National Instruments

• Copy the data rows in the same table

  Here is the structure of the table, I work I would like all the value with ID = 1 in new lines. The ID must be 2 with the same data.

  I am using following query to accomplish, but get the error.

  Insert into hsp_column_detail_item (DETAIL_ID, VALUE, POSITION, GENERATION, OPERATOR, LABEL)

  Select 2, POSITION, GENERATION, OPERATOR, VALUE, LABEL

  Of

  hsp_column_detail_item

  where

  detail_id = 1

  ORA-02291: integrity constraint (PLANSAMP. FK_HSP_DETAIL_ID) violated - key parent not found

  Columns

  Detail_ID		1	THERE	INTEGER NUMBER	Frequency
  VALUE	2	THERE	FLOAT	None
  POSITION	3	THERE	INTEGER NUMBER	None
  GENERATION	4	THERE	INTEGER NUMBER	None
  OPERATOR	5	THERE	INTEGER NUMBER	None
  LABEL	6	THERE	VARCHAR2 (1500 bytes)	None

  Sample data:

  Label Detail_ID value generation operator Position

  1

  500

  0

  0

  1

  ABC

  1

  300

  1

  0

  1

  def

  1

  200

  2

  0

  1

  EFG

  Index

  Name of the index

  Column name

  Col_Detail_Item

  Detail_ID

  Col_Detail_Item

  Position

  866532 wrote:

  Where detail_id in

  (select detail_id in the hsp_column_detail where)

  dim1 = (select object_id from hsp_object where the object_name = 'Real' and object_type = 31) and

  Dim5 = (select object_id from hsp_object where the object_name = 'Work' and object_type = 35) and

  dim7 = (select object_id from hsp_object where the object_name = 'FY13' and object_type = 38)

  );

  ORA-00001: unique constraint (PLANSAMP. Voilated PK_HSP_COL_DETAIL)

  To not violate the unique constraint, two requirements:

  -The detail_id 5 you insert would not already exist in the table

  -Since you are forcing this detail_id, your subquery must return only one row: so you can write ' detail where id = (select...) "and:

  -either the dim1 / dim5 / dim7 filters are quite selective

  - or to make any decision on which detail_id to reproduce: max (detail_id) or min (detail_id) or any other way yo select the right / arbitrary

• split the data belonging to the same group at two different levels

  Hello
  
  I have data in the same group I want to split into two levels.
  
  For example: If the XML is:
  
  < data >
  Taxable < Type > < / type >
  < value1 > one < / value1 >
  b < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  e < value1 > < / 1 >
  f < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  g < value1 > < / 1 >
  h < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  u < value1 > < / 1 >
  v < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  o < value1 > < / 1 >
  < value2 > x < / value2 >
  < / data >
  
  
  The output using the RTF model should be:
  
  Taxable
  a and b
  e f
  g h
  
  Not taxable
  u v
  l x
  
  I can't change the query to add a group.
  
  Kindly, if anyone can help
  
  Published by: user10606061 on 25/06/2012 01:05

  
  

  delete a table with 2 columns and two rows. In the second column of row 1
  
  in column 2
  

  table below
  

  PS: your must be within a root element

• Captivate data capture on the same computer database

  Is it possible to use a local computer to capture quiz data in a database that is located on this computer?  Can't rely on Internet, so must have this laptop stand alone on one (or Tablet).  If several persons participate in a program of Captivate, one at the time and the data would be recorded for later analysis.  Thanks for your thoughts.  If there is no proof of concepts, examples out there, so much the better

  Mark

  Mark,

  I think you are the internal reports server, which allows users under the same domain to access the project and post the result on your server (computer) where hosted you at the course.

  Adobe Captivate uses the internalServerReporting.php and InternalServerRead.php for this purpose, you can customize these PHP files to show the results to your local database residing on the machine as well. I don't have any code of practice as a sample, but I can direct you to a blog that can share some details on the reports of internal server-

  http://blogs.Adobe.com/Captivate/2010/08/reporting-the-quiz-results-to-a-local-server.html

  I hope this helps.

  Thank you

  Anjaneai

• accidentally create data file with the same name but different location

  Hi all
  
  I was accidentally create data file in the tablespace with the same name but in another location.
  
  / U03/DataFile/REKON65. DBF
  
  new data file: / u04/datafile/REKON65. DBF
  
  My question: what happens with data/u03/datafile/REKON65 file. DBF? the data inside/u03/datafile/REKON65. DBF went?
  
  
  Thank you

  Indra says:
  Hi all

  I was accidentally create data file in the tablespace with the same name but in another location.

  / U03/DataFile/REKON65. DBF

  new data file: / u04/datafile/REKON65. DBF

  My question: what happens with data/u03/datafile/REKON65 file. DBF?

  nothing

  the data inside/u03/datafile/REKON65. DBF went?

  not gone