Cursor jumps into the layers palette

Similar Questions

• Windows 8 cursor jumps in the existing text and continues to type here rather than the finish line that I am on, anyone else spotted the same thing?

  Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on.  Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part.  Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated.  Think there may be a loophole to WIN 8.  It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing?  Or is it just me?

  Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.

  Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from

  http://www.Synaptics.com/resources/drivers

  above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.

  Its such a relief to be able to settle this problem - THANK you

  Lets see if it sorts the problem MS Office too.

• How to add a path just above a selected path targeted in the layers palette?

  I put it in the feature request but maybe its already possible right in front of me... I have a few layers or layers sup with many paths, often I'll remove a path and want to replace it with another way of access, but in the same order of stacking against the railways in its layer. I thought I would click on select the path in the path, I deleted the layers stack and draw my new path in the document window to have it appears higher than selected path, but for me, I find that the new path is placed at the top of the stack, which could be 50 paths above for example... so I have to scroll up to find in the layers palette and drag in back down to the position I want, in layers of stack, just above the path I had chosen before shooting the new path.

  I would rather just to select the specific path, I want to attract higher up in the stack of layers and then draw in the document window, the new path will be added on top of this path, I selected in the layers palette...

  is there an easier way? am I missing something?

  I know that there is an order now maintained by illustrator, the last path is placed up in the drawing sequence. fine. But I was hoping a command could be programmed in where we can click on the 'target' circle in the layers palette to mean that we want the next course plotted above this target selection... something like that.

  where my explanation was a little wordy, here's an example, the way that I drew ends by upstairs, instead of above the trail, I selected below in the battery... hoping if I target this way below by clicking its target circle, the next path would be above him. of until I have clear this path with CTRL/CMMD by clicking on the button of his target, which would free the sequence of drawing of this target base and default back up to the top of the stack in this layer.

  

  You can try to double-click the path to go into Isolation mode.

  Then draw the new path and press ESC.

  This should give you a new path directly above the trail double you clicked.

• Muse cc14 layers will be will not move in the layers palette

  Can anyone tell why layers in the layers palette ceases to be active and and does not move in the layers palette. This happens at least once daily, after working for a short period with muse?

  Thank you.

  Hi KenThree,

  Can you please try to reset the preferences of Adobe Muse CC 2014:

  Adobe Muse CC 2014 clear preferences-

  Windows

  Please rename the following two folders:

  %AppData%\COM.Adobe.AdobeMuseCC.2014.0

  %AppData%\Adobe\Adobe muse CC

  '%AppData%' is a shortcut which when entered in the upper part of a window of the file Explorer will go straight into the hidden folder AppData Roaming to your account on the computer.

  Mac:

  Remove the AdobeMuse-CC folder from the following location: ~/Library/Preferences/Adobe

  Empty the trash

  Kind regards

  Akshay

• NB200 - cursor jumps around the screen while typing

  Hello

  When I type in MS Word or OpenOffice or any other text box on a Web site for example flushing prompt that identifies where the next word/character must be placed around the screen jumps.

  So when I type a line of text I then start another line below and then without reason, that the text cursor jumps to the top line. This inserts text in the wrong place, which is incredibly annoying!

  Any help or ideas greatly appreciated!
  Thesis writing will be more months if the problem persists! :)

  John

  Here is the solution I've used and displayed a few threads down...

  Under the properties of the mouse, click on the "Advanced" tab, click on the pointer speed and Tapping settings, in the new screen click setting Tapping, on this screen, check the box that says disable Tapping during the key entry.

  You will suffer is not since the Cursur jump you met more...

  HTH,

  The f

• Cursor jumps across the screen.

  While trying to navigate around my screen with my mousepad to laptop, the cursor jumps randomly offline.

  • ex: when you try to click on the scroll bar (on a Web page) at the bottom of the page, the cursor jumps to the top of the page.
  • ex: on the desktop, I'll move the cursor over an icon, and the cursor will move to a random point on the screen and continue to move in the direction my finger, said that on a new path.
  • Sometimes, the slider works very well.
  • The problem occurs when you use any program.
  • I don't have the problem "while typing, my mouse moves and clicks on".
  • The movement is just a quick jump from point a to point b. (not rapidly moving around screen clicking everything)
  • If you need more info leave me a message.

  Specifications of the computer:

  -Laptop computer Dell: Latitude D620

  -Race: Service of Windows Xp Professional Version 2002 pack 3
  -Computer: Genuine Intel(r) CPU

  @1.83 GHz T2400
  987 MHz, 1.00 GB of RAM

  Properties of the mouse:

  Typical laptop mouse (the one under the space bar on the keyboard)

  Driver Date: 7-1-2001

  Driver version: 5.1.2600

  Thank you

  Rollwtide88

  This can occur if your version of windows is not genuine. Please call Microsoft for even better your current situation.

• When scrolling down using the touchpad, the cursor jumps to the back arrow

  Hi, could someone tell me why when I use my touchpad, I move the cursor over the arrow down to scroll down and sometimes the cursor jumps on the back button on the screen and goes back one screen and I lose what I'm getting?

  Thank you.  I understand.  I went to the mouse and then to the touchpad device settings and I was able to change.  They were called corner buttons.  They function as shortcuts to different things on each corner of the touchpad.  I disabled it.

• Why my cursor jump around the page when I type

  When I type on Word or an e-mail my cursor jumps around the Aalst page all the time. This could be the cause?

  Hi Phil,

  1. what kind of mouse do you use? Wired or wireless?
  2. is it a laptop or desktop?
  3 when was the last time it was working fine?

  I suggest that you check if the mouse settings are correct.

  You can read the following article and check.

  Change the settings of the mouse

  Method 2:

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• When you write a sentence the cursor jumps at the beginning if I type too fast

  If I type too fast or even at a moderate speed my cursor jumps at the beginning or in another part of the sentence.  I type very slowly in order to complete a sentence.

  I'll guess that you are using a laptop with a touchpad? If Yes, go to control panel > mouse and then look for a tab that relates to your touch pad and then see if you can adjust the sensitivity. Chances are that you are hit while you type.

  I hope this helps.

• Why is that when I touch the button tab the cursor jumps to the bottom of the page

  I copy sentences from one document to another and at one point in the second document is more button tab functions correctly, instead of tab on it goes to the bottom of the document

  Hi Mitchem,

  It seems that when you press the tab key, the cursor jumps to the bottom of the page. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

  3. the problem occurs in Notepad too?

  4. What are the file types of the documents that you use?

  Method 1.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  If the problem does not occur in safe mode, then proceed to clean boot state.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 2.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• Illustrator 2015.3 - cannot select objects in the layers palette

  After having upgraded to 2015.3 this morning, I can not select the layers to reorganize in the layers palette. The file is one I created before the update - but even a newly created file has this same problem.

  He puts the light color to the right of the object in the layers palette, but refused to move the object upward or down in the stack.

  Has anyone else had this problem and solved?

  Mac Yosemite 10.10.5.

  Thank you

  Beth

  Thanks Mike - I found my answer: decouple, decouple, dissociate. I who appears when objects are grouped a few times it can not be moved until it was separated.

• clicking CTRL + L or CRTL + are the cursor jumps to the beginning or the end of a line vs the next word or previous/tag

  I upgraded to CS 5.5 and code view when I click CTRL + L or CRTL + are the cursor jumps to the beginning or the end of a line (respectively) rather than jumping to the beginning or the end of the word/tag next to it.

  Someone knows how to fix this?  TIA, gwc

  You can change the keyboard shortcuts...

  Go to Edition > keyboard shortcuts

  Click on define duplicate

  Save with a name of your choice

  Under orders from drop down choose Code editing
  You can change all the keyboard shortcuts here to what you prefer

  With my default 2015 install, Ctrl + R doesn't do anything and Ctrl + L tries to link a file to what I chose in Code or design view

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?

  

• I want to see the layer mask instead of the thumbnail of the layer mask in the layers palette.

  I don't see a thumbnail of the mask layer instead of the layer mask itself when I add a layer mask to the CS6.  How can I change this so the layer mask

  appear in the layers palette?

  Thank you

  Marc

  From what I remember of the CS6, it's the same CC follow these steps: in the layers palette, click on Panel options

  

  Click on the larger thumbnail

  

  The layer mask should now be big enough to see. Otherwise, you need to display it on the screen by alt clicking on

  on a PC option by clicking on the layer mask on a Mac

  

• I can't get the layers palette to show up. I go to the window and pull down to layers, but nothing appears.

  I used Illustrator in the past, but just updated for cc and added today.  I can't get the layers palette to show up.  Any advice?

  No one can tell you anything without the proper system or other technical details info. Start by resetting the workspace and check your toolbar on the right palettes.

  Mylenium