custom clothing - rather than disk

Similar Questions

• I have a clone of the hard disk that my images are on for the trip.  How to run LR using that drive rather than what he became in general?

  I cloned the drive that my images are on a hard disk that is tougher to travel.  Think of this as an extra back upward.  How to run LR using that drive rather than what he became in general?  My plan is to return to the top/clone the drive trip to the typical reader when I go home.  The catalogue is available on a MacBook Air I'll use at any time.  It is not just enough space on the hard drive of MB Air for images.  I thought of naming the road trip with the same name as the player who is at home, and know that LR, but I think I'll get confused by doing this. The info on the two drives is the same at this point.

  Thank you.

  You use the update folder location command, as explained in part 2 of this document: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  You can consider using Smart saw instead of wearing of the pictures with you on an external drive, if you have the space.

• the customer wants social links to 'share' rather than just a link to... How do I or can I do this with Muse

  the customer wants social links to 'share' rather than just a link to... How do I or can I do this with Muse

  You can try sharethis.com to exact purpose:

  http://www.SHARETHIS.com

  Thank you

  Sanjit

• Install ESXi 4.1 see physical disks rather than raid 1

  Data sheet:

  -CPU Intel X 3450

  -Intel S3420GPLC motherboard

  -2 X Seagate ST3750528AS 750 GB (Raid 1)

  I try to install esxi 4.1 on above using the embedded raid controller.

  According to this post (http://communities.vmware.com/message/1393463#1393463) I set the Commission to use "Intel matrix Raid" as the type of controller.  Who is the one who supports Raid 5 so that I would use anyway.

  The problem is when I choose the disc to install VMware shows two physical drives rather than for the raid set.  Installation at one of these BRAKES the raid (not surprising), who then proceeds to try to rebuild his car, but never quite get there.

  Gparted and Win 2008 as bios only list the raid set.

  The Board is listed in the list of compatibility with the following notes:

  1. State power supply not supplied.

  2. total count and status not provided all of the thermal system and temperature sensors.

  3. when the State of system fan not intended to indicate that a fan has been removed.

  4 Intel 82578 DM Gigabit Network Connection not supported.

  Anyone has any advice on what I could try?

  As a general rule, the RAID controllers on board are NOT material (with BBWC) RAID controllers... Therefore, you will not see a picture that you build on them as a single volume, but as their readers (lone) component... ESX/ESXi requires RAID controllers for drives configured in a table in order to present in a table...

  What HCL did the jury on (do not see on the VMware HCL)?

  In addition, given that the NETWORK card is not supported, you need to install a NETWORK card that is supported before you will be able to fully install ESX/ESXi on the system...

  If you really need to have readers in a table (never a bad idea to use RAID 1 or 10), then you will need get a RAID controller that is on the VMware HCL as supported (for installing ESX/ESXi on) and then move on... I'd go with a controller using the LSI MegaRAID chipset (or this LSI controller directly). As you connect SATA drives to the system, you will want to get the RAID controller that is listed as SATA/SAS-RAID, so that it will work properly/entirely with the SATA (and SAS) readers... Newegg has the LSI MegaRAID cards manage up to four drives internally (and are on the VMware HCL) for not much money (~ $300 each)...

  As many people on these boards will tell you, material compatibility is CRITICAL for ESX/ESXi... VMware publishes and updates constantly, their HCL for a reason... If it's on, then it is supported in the configuration also listed... If something is not listed for a certain version/version, then you can pretty much bet that it is not supported and will not work. If you want a stable host and environment, you will have to pay special attention to the HCL in deciding the selection of material...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Built-in social sharing via URL custom rather than "renditions" folio

  We publish a free magazine on the iPad, and we have the same content available for free on our Web site. We would like to send all traffic sharing of the content of our Web site, rather than iPad app iPad through "renditions" folio content.

  Currently, we do this by coding buttons on every page of the iPad which, when we, take people to the corresponding HTML code content via Twitter and Facebook URL sharer. Of course, we would prefer if this could be done through the icon 'share' in the Viewer.

  Is it possible to configure the Viewer to send people to our URL for Facebook, Twitter and Email?

  Thank you!

  Lol the share in the Viewer icon is dedicated to allow the social sharing process of DPS.

  Neil

• Treats each graphic link/button as an image of view rather than direct me to the target address.

  Don't know how to explain it-
  If I visit a Web site and click on a graphic link, he directs me to a new tab showing the graphical image, I just clicked, rather than the target site. She treats each graph (or button) link as I ask for "image".
  I tried to right click to "open the link in a new tab" - same result.

  Sorry I can't explain more clearly.

  you don't know.

  it was Qute 4 + + (custom mod)  1.14
  

• Drive mapping: How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.

  How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.  I tried to unplug and power, reboot etc.  There is no F: drive connected to the computer.

  Go to start / Control Panel / administrative tools / computer management / "disk management and select external reader by clicking on it and then right-click on it and select change drive letter and paths."  It should show the letter currently assigned (G I guess).  Click the button change.  To the right will be a drop of drive letters box.  Go ahead and select F and click on OK.  That should do it. If F is not available, then it is used by the system for something else.  Check disk management to see if you can find it.  If it is not, and is not available in the list, I'm afraid, you will not be able to change until find you what is using drive letter F and remove it, or change it to something else.

  I hope this helps.  If this isn't the case, after return and we will try to understand what is using F or why it is not available.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I ordered in error Windows rather than Mac Photoshop elements 14.  How to Exchange?

  I ordered in error Windows rather than Mac Photoshop elements 14.  How to Exchange?

  Back to sale and cancel your order and get a refund, then buy the correct version

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How Iswitch my plan for a single payment for the year, rather than monthly?

  My subscription of the CC is to be renewed. I don't see how to change it for a plan with a payment rather than monthly. Where are these options and prices?

  I signed up for the plan of Ps and Lr.

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• From LR6.1 to LR6.3: rename folders created are based on the date of importation rather than the date of shooting!

  I started using LR with version 2... My import workflow was even up to 6.1 and all my files are organized in the same way for more than 10 years.

  I went on LR6.2 given the changes made in the import dialog. But upgraded to LR6.3 think the problem has been resolved.

  But now I noticed that all my photos are renamed and placed in folders corresponding to the date of importation rather than the date of shooting... I rename my files from custom and is gone in this dialogue, but has not as how to restore LR import my photos using the date of shooting. This creates havoc on my hard drives and in LR. I use the date of shooting a lot to find my photos, since I often neglect to add keywords.

  I really need to be able to get the date of shooting on the behalf of my photos and have copied them in the folder the correct date.

  Thanks in advance for your help.

  BTW: something has changed in the way the forum appears. Research is not very powerful... it has not brought something, yet I know that the import dialog has been at length when 6.2 was introduced. In addition, I see no browser passed a few more recent messages. I don't like the new interface.

  Well, I answered my own question. Yes, I was looking for settings in the destination Panel... There is a line that shows what would change the name... and it showed the date of importation as the new name... but actually... It was only to show you what the name change would look like. Because I had a selected image, I thought it would show that the change of name for this image. But it is not related to the image... The import worked as expected... My apologies for disturbing him. .

• Using the scanner rather than generic software WIA support PES 9

  Updated PES 9 a couple of weeks. Already got PSE6.  With PSE6, with my Canon LiDE90 scanner, when I chose import on the file menu and import selected from a scanner, I gives me the option to use the WIA interface or software compatible WIA Canon Scan Gear which has more controls. With PSE9, the only option when I select the LiDE90 is to use the generic Windows WIA driver.

  I can, of course, to use the Canon scanner software apart from PSE9 and send the file to PSE9 for editing. That works very well, but what I don't like about the digitization of this way, is that a temporary file should be created by the scanner software which is saved immediately and then load that into PSE9.

  With PSE6 when to use Scan Canon material in PSE6, the scanned image has been loaded in PSE 6 as a new image without title. If I chose to delete the scanned image, that I edited rather than save the file, there is no temporary file has been saved on the disk at all. I much prefer this work sequence.

  SOOOO... How can I get the Canon Scan Gear software optionally via the PSE9 file - menu import? I tried to reinstall PSE9 and reloaded the scanning Canon driver, too. No luck so far. Why Adobe would have FEWER options with a software upgrade?

  Technical details: Toshiba laptop running Vista 32 bit with all updates.

  If you need the TWAIN driver from Adobe, you must move it in the optional plug-in folder are in the folder plugins ol ' ordinary, as explained in the linked higher tech doc in this thread.

• Any way to post a link to a file in the catalyst, rather than a URL or a State?

  Limitation of page given the 20, I'll have to build my prototype into pieces, but so far, have been unable to find a way to link different prototypes.  Does anyone know how to add a link to a local file rather than a live URL or just another State in the same prototype?  Even in code view, it seems I'm unable to remove the ""http://"it automatically adds links... "

  Many people can solve their problems with the limit of page 20 using custom components. You should check this thread

  http://forums.Adobe.com/message/2500263#2500263

  It is possible to use the onClick-> go to the State and States set on a custom component or one of its subcomponents.

  Catalyst does not support a link to a local file.

  -Bear

• Export to Excel button rather than the export report link

  I use of Denes Kubicek export to Excel. The customer wants an Export to Excel button rather than the link in the Section of the report for the report's export. So I created a button named "Download to Excel" and created a branch of the Branch of URL of return to function under a condition "When the button is pressed" with "Download to Excel" and action of the branch is
  
  Start
  return ' f? p = & APP_ID.:0 : & SESSION. : D OWNLOAD_EXCEL:no:T_REGION_ID, T_EXCEL_NAME, T_PAGE: #REGION_ID #, MiniProfile_firms, & APP_PAGE_ID.';
  end;
  
  When I press the button to get the following "File download" windows error:
  < pre >
  Do you want to save this file, or find a program online to open it?
  
  Name: .xls [1]
  Type: Unknown file Type
  < / pre >
  
  Why is that happening and how can I solve this problem?
  
  Robert

  Robert,

  http://Apex.Oracle.com/pls/OTN/f?p=31517:108

  Create a hidden item: p108_region_id and it calculate whether it is NULL using the suite of applications:

  SELECT region_id
    FROM apex_application_page_regions
   WHERE application_id = :app_id
     AND page_id = :app_page_id
     AND region_name = 'Employees'
  

  Make your button a button URL with the following link:

  f? p = & APP_ID.: 0: & SESSION. : D OWNLOAD_EXCEL:no:T_REGION_ID, T_EXCEL_NAME, T_PAGE: P108_REGION_ID, my_report, & APP_PAGE_ID.

  and there you go.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Can I actually delete messages rather than having that they are sent to the Recycle Bin?

  I want to know how I can delete messages rather than the envoys in a junk folder or recycle bin and then delete them from there. I have several filters set up and send them to separate subfolders. But of course, when I look at these and remove them, they go in the trash. Then I can actually delete them so that they're gone, that's what I think delete would do in the first place. Is it possible to do so, to delete messages without moving them to the trash and then remove them from there? It is important that I don't miss any messages, I still sometimes do, but I'll have 50 posts or more per day that are trash. Most of them pass through my filters, but if I do not have a daily interview with a bunch of garbage I'd meet a real nightmare.
  Surely people have requested this, and I've seen some with answers like "it's the way it was designed. Can it be done?

  Thank you, if there is a useful link that send.

  Hold down the SHIFT key when you press DELETE.

• How can I close a tab that has locked up, rather than farm the whole browser to be insensitive?

  I have a bad habit of having several tabs open. If I click on a link that translates the whole browser becomes unresponsive, how do I close the tab offending rather than having to close the entire browser and losing all my tabs?

  It is not a bad habit, it's normal.

  Unfortunately, there is currently no way to 'kill' a single tab without picking up Firefox.

  A few times a week I get "not responding" when I exceed the amount of memory Firefox can use. Usually about 60-90 seconds, I can close Firefox by using the menu, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit
  • These same keys in order:Alt f x

  Freezes caused by other reasons could not out, in which case you get stuck. Prevention is the best cure.

  This support article covers some common reasons for freezes: Firefox crashes or does not - how to fix.

  Since the Flash plugin can also cause this problem and it is used everywhere around the web, I suggest the following to minimize potential problems with Flash in your troubleshooting:

  (1) to avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

  To set 'Ask to activate', open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  With this setting, when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a gray rectangle dark in the page or an information bar sliding between the toolbar and in the page area.

  The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. (If it is red, Flash must update.)

  The delay in the activation of Flash can help distinguish between the problems caused on the initial page load, put in folds and script activation vs Flash/loading bar.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

  (2) a common cause of errors in script does not work in Windows Vista and later is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.