Satellite L200: Why LCD freezes and lines to the LCD display displayed during charging?

Similar Questions

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• Satellite A500 - 18Q - screen freezes and BSOD appears the screen

  I bought my computer 3 weeks ago and I have a problem.
  My computer froze or displays the blue screen. It happens randomly, without having to open any program.

  Sometimes half an hour or an hour later as I start my computer or nothing happens.
  I have windows 7 home.

  I need help

  Hmm BSODS can happen thanks to a software or hardware problem and therefore it is difficult to say what could cause this.
  The A500 seems to be a new model of laptop and I doubt that the dust could be the reason for the temperature more high which could cause the BSOD.
  However, you should check if the cooling modules are free of dust and it might be useful to clean using the can of compressed air.

  In addition, you should check if your BIOS is up to date.
  If this isn't the case,-> to update this!

  Welcome them

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• Why my files and folders on the desktop goes away when I stop or disconnect my computer?

  Why my files and folders on the desktop goes away when I stop or disconnect my computer?

  When I start my computer its message of shows like temporary file is retained and watch the preparing your desktop... can anyone find the answer?

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Read this: http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• My creative cloud app Manager begins immediately the update when it is opened, and it freezes and never ends the update.  So I'm not able to access anything whatsoever.

  My creative cloud app Manager begins immediately the update when it is opened, and it freezes and never ends the update.  So I'm not able to access anything whatsoever.  How to stop the update process, or reload?  I have to reinstall everything?

  Hello

  You have to just reinstall CC app. Please follow the steps mentioned below to solve this problem, depending on your operating system.

  (Mac)

  (1) close adobe all processes in the activity monitor (cloud Creative), synchronization of the base, CC, ccx, services for the desktop application adobe, adobe office, CIB Adobe updater AAM Broker service

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

  (Windows)

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old and delete the folder Adobe application manager

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

• Why my preview and preview in the browser looks so small? What I am doing wrong?

  

  Seem to duplicate to your other thread: why my preview and preview in the browser looks so small? What am I doing wrong? Please check as suggested and let me know if this helps.

• Satellite M55-S135 screen freezes and becomes white.

  Recently, my computer screen freezes until I have the touch. I touch the screen I use the computer or the screen turns white and everything I type does not register on the screen. I see not the entrance until I get the screen and hold it pressed. Sometimes even if I hold the screen I can not imput to register, it will just white. Anyone know why this happens.

  This happens when the displaycable is not correctly connected to the control that is located at the top of the LCD screen. I highly recommend to send your machine to a service partner in your country and let check this problem. It could also be a malfunction of the material of the screen, but not for sure.

  If you want to contact the nearest service partner in your country, click here--> "http://eu.computers.toshiba-europe.com/" then then just go to-> Support downloads & -> support-> repairs maintenance home page &-> find the nearest authorized Service provider

  Welcome them

• Satellite M70 164 - screen freezes and goes black, overheating

  Hello world! :)

  Recently my Satellite m70-164 started to freeze after only a few minutes of work. The picture on the screen freezes, and a few seconds later, it becomes completely black.
  The computer doesn't even have time to warm up, and it's not stop... It's just the screen that freezes and becomes so black. I have to reset the computer by pressing the power button. (I write from another computer).

  I noticed that working time reduced whenever I have reset the computer and after some time it freezes even though I am in the BIOS settings, so I don't think it's an OS problem.
  Even if the computer does not have time to warm up, this suggests it might be a heat problem.
  So I tried pointing a fan this is low (a big, like the ones we use in the summer), and it works without problem!

  With the fan facing these, I reinstalled Windows - so no Virus.
  Laptop fan * not * continue to operate as it is overheating.
  The fan runs and it is not clogged as I've cleaned.

  So if anyone has the same problem, or ideas, please respond!
  (And sorry for my English)
  Thanks in advance! : D

  Hey Buddy,

  I agree with you. In this case, even in the BIOS, that it has nothing to do with Windows or a Virus. In this case, it seems to be a hardware malfunction

  But before contacting an authorized service provider to diagnose what part is the cause, clean your laptop using a jet of compressed air. This should be done from time to time (every 4 months) and, therefore, it of not necessary to disassemble the laptop.

  Check this box!

• Satellite C660-11K - keeps freezing and unable to access the windows

  Recently purchased by Satellite C660 11 K and load a game on it, after a few hours it froze (ctrl alt del wouldn't work) I stopped and he started up and I got a message saying some software or hardware was the stoppage of work Windows.

  I restored it to factory with the recovery disk. However, I have not loaded all the games or other software since then, but it keeps freezing, and I had to use the drive recovery 3 times!
  I don't know what else to try!

  What happen exactly when you use own OS preinstalled?
  What do you do when your computer crashes?

• Satellite L670: touchpad keeps freezing and moves in an own direction

  The button you use to the movement of the cursor keeps freezing and keeps wanting to go in its own direction,
  I've owned only the laptop for 3 weeks.

  Can someone give me an answer please.

  Hello

  Have you tried reinstalling the driver for the touchpad?
  If this isn't the case, please try this.
  Visit the page of the Toshiba driver and try to reinstall the driver for the touchpad that is responsible for the functionality of the touchpad.

  Welcome them

• Satellite M307 - a lot of points and lines on the screen

  I bought this new pc in China there is a half year
  However, when I move the screen today, there are still a lot of points and lines in this respect.

  But if I don't touch it, it will be OK. I think this may be caused by the connection between the screen and the main physical system. Please contact me: [email protected]

  Thank you!

  Hello!

  I agree with you it's a connection problem or the display is faulty.

  I think your laptop should be still under warranty then I would go to a local ASP.
  They can order all the necessary parts and Exchange.

  Good bye

• Satellite A300-1IL - monitor has white lines at the bottom

  Good evening

  about an hour, followed by my satellite a300 monitor has white lines at the bottom.
  I try to stop, change the resolution but i just turn on my laptop, the screen has this white line.

  It is a problem of monito'rs or videocar problem?

  Sorry for my ebglish

  Hello

  > It is a problem of monito'rs or videocar problem?
  It's easy to say; you need to connect the external monitor to the laptop and need to check if the same if possible lines on a second external display.

  If the lines were visible on the external monitor, so that the GPU fault is possible.
  Otherwise, it may be defective internal display.

  Welcome them

• Lenovo blue G550 laptop - red, yellow, spots and lines on the screen

  Hello

  I have a laptop of Lenovo G550 old 2 year, system model 20023 (Dual-Core CPU T4300 2, 10 GHz, 3, 00 GB RAM) running 32 bit Win 7 Home Premium OS with graphics card Mobile Intel (r) 4 Series Express Chipset Family.

  Months ago, I started having 2 vertical lines on my screen, that change color and tend to disappear when I tilt it. Recently, the problem is a graduate in red, blue and yellow spots on the screen. Tilt is no longer works, but I noticed a report defined the degree of pressure on the case. When I pushed hard enough on the left below identify the cases (the hard drive where), the problem is completely solved. I also tried to connect another monitor and there seems to be no problem either. Help, please.

  Graphics card problem seemed highly unlikely with the image of the external monitor that appears to be normal. I tried reseating the LCD cable and it fixed the problem.

• How can I change the height police size and line (so the police fits) in my Inbox?

  In order to make the information containing the source and the object of my incoming emails (from Netzero) more easy to read, I want to make the font bigger. However, in doing so, the heights of line remain the same and the information on each line are compressed vertically. This makes it actually harder to read.

  See this:
  https://support.Mozilla.com/en-us/KB/page+zoom