Customization of the player

Similar Questions

• credentials for the customization of the player download tool

  I was recently approved for distribution.

  When I try to download the customization tool, I'm prompted credentials.

  Where can I get the credentials to get the tool?

  Adobe seem to have problems with their FTP server right now. Not sure if anyone is working there.

• Customization of the installation of Reader 10.1

  I recently downloaded the Player 10.1 update.  I use the customization tool X Adobe to customize the initial installation to 10.01 package remove the automatic update, etc..  However, when I install the 10.1 update, it deletes all my customizations!  How to customize the update 10.1 so there is no that?  I tried to create a transformation in the Adobe X customization tool, but he tells me I am out of setup.ini.  I've never had this happen with any other updates Adobe.

  Thank you

  Hello

  I finally seem to understand why you must get this question. At took some fiddling around.

  You try to change the installation of the installer options, i.e. something like making installation reboot without oversight or deletion. This requires one or more additional parameters to be used when installing the MSI file. These entries must be added to the Setup.ini file which in turn calls the MSI with the required parameters.

  Achieve the same, so you will have the following text:

  1. download the web installer for reader ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/en_US/AdbeRdr1010_en_US.exe 10.1.0

  2. open a command prompt window (start > run > type cmd and press enter).

  3. type: -sfx_o -sfx_ne and press ENTER.

  for example.C:\AdbeRdr1010_en_US.exe -sfx_o"C:\Extracted_Contents" -sfx_ne

  4. check the contents of the extracted folder and you should see an AcroRead.MSI, an exe and a few other folders.

  5. start Adobe Customization Wizard X and open the AcroRead.msi.

  6 perform the necessary customizations and click on file > Save Package. This will change the Setup.ini file to make sure that all the changes you have made will be kept during the installation of drive.

  7. double-click on Setup.exe, and you should be good to go.

  Thank you

  Ankit

• Why my sound has stopped on Web sites (works when I play music from the player)

  used to work; now don't; When I'm on the Web sites that have video, no sound. I have sound from the player. TKS!

  Thank you! Of course, I expect sound of something which is not his! Sorry for the trouble!

• Is there a shortcut to activate the display of the player?

  Is there a shortcut to activate the display of the player?

  See:

  • bug 1144749 - create a shortcut to the drive mode
  • bug 1160848 - add shortcuts to scroll to the next/previous paragraphs in Player Mode

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html
  You can vote for a bug to show your interest
  https://Bugzilla.Mozilla.org/page.cgi?id=voting.html

• How can I fix the Player Plugin update? Whenever I click on the box to update and download the version, it still shows a red box in front of by update

  I'm trying to update a Plugin. When I click on the red box the Player Plugin, this brings me to the Adobe site in order to choose the version, language and operating system. I do and download version. It shows the version already installed. When I go back to check and see if the Adobe Reader Plugin has been updated, there are always the red box to the right, saying: it should be updated. I refreshed Firefox and that did not solve the problem. What can I do to update this Plugin?

  Is a situation like this, go to the web site of programs and check there.
  If the site says you have existing programs, that's all you need.

• Since the update to Firefox 22 Twitch.tv does not load the player more

  I've just updated to Firefox 22 and no Twitch.tvplayer simply does not load. Just a black rectangle where the player is supposed to be and if I right click in this area, I get the same menu as everywhere else, which means that the player certainly didn't load. YouTube works fine however.

  If you use extensions (Tools > Modules > Extensions) as NoScript , Adblock Plus or Ghostery which can block content, and then make sure that these extensions are not blocking the content or Block of Flash .

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When you use Adobe Flash on youtube for example. The player will receive more and more delays when you use the tools of player until firefox freezes for about 10 seconds.

  After the delay freezing of the player will be reset to 0. I can reproduce this 'crash' by moving just my mouse on the youtube progress bar and see the delay to accrue. This only happens when firefox is my main window.

  Hello, there are reports by users that comodo products may not work well with the safe_mode for firefox that adobe has introduced in its version of the plugin flash since version 11.3.

  http://forums.Adobe.com/thread/1074253

  http://forums.Comodo.com/empty-t85399.0.html

  Please make sure that firefox.exe, plugin - container.exe and FlashPlayerPlugin_*.exe are not blocked or sandbox sort by your security or software in the case where it doesn't work or try to change your provider AV (I would recommend microsoft security essential, it is quite reliable and light) or downgrade to flash version 10.3.

• YouTube gives me problems when using Firefox. The player gives me no answer is only a black screen with no buffering bar.

  YouTube player does not load and does not answer at all besides. This problem is only occurs on Firefox.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  Try disabling hardware acceleration in Flash Player.

  See:

  • https://support.Mozilla.com/kb/cannot+view+full+screen+Flash+videos
  • http://www.YouTube.com/swf_test.html (right click on the player: settings)

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• in the menu toolbar customization, ALL the small icons in the last set (home, reload the page, stop downloadig page, etc.) are dishes on MISSING. What can I do?

  in the menu toolbar customization, ALL the small icons in the last set (home, reload the page, page download stop, etc.) are dishes on MISSING, and therefore I can not add the Firefox.What can I do?

  These buttons are not in the drop-down to 'Add' Palette, they are on the Navigation toolbar and must be "moved".
  The buttons Stop and reload should appear between the address bar and the search bar when customize is open, and the home button should appear to the right of the search bar.

• Impossible to install the Player DVD Toshiba HD for Windows 7-64 bit

  Laptop: Toshiba Qosmio G40 with windows 7 Ultimate 64 Bit

  I can't install the driver of DVD HD Toshiba for Windows 7-64 bit 4.60.03 from 30/11/09!

  The facility will be cancel information that the software cannot be installed on this system.

  Problem is that the file that you downloaded is not the player but just an update.
  Usually, you should be able to install player designed for Vista and install this updated level, but eventually I can see, Toshiba doesn't offer HD DVD player for Vista 64-bit.

  I assume that your laptop comes with Vista 32 bit only. Am I right about that?

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• Media Player error play 3gp: the player might not support the file type or does not support the codec used to compress the file.

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  Windows gives you integrated programs to open the image as png files.

  In Vista, use Windows Photo Gallery to open png files.

  In Windows 7, if you use it, you can use Windows Photo Viewer to open png files.

  If you have installed Windows Live Essentials, you can use Windows live Photo Gallery to open png files.

• Customization of the insertion in a custom user interface palette

  Greetings,

  I am working on a custom for Teststand application user interface and I want to give the user the ability to edit files in sequence using a simplified subset of the predefined types step.  I based user interface custom off the Labview FullOI example in the teststand 4.2 folder.

  I found the context menu item 'Customize' out of the palette of insertion and who seems to get most of what I'm looking for (hiding like IVI and synchronization of files and the individual steps as the FTP files and call executable), but what I really want to know, is if I can remove it to the different symbols of 'top' that choose between adapters.  I wish that the customer must only see Labview and none and RID where hide the CVI, C/C++ DLL, .NET and ActiveX.

  Where, moreover, are the options that you set in the menu customize stored user interface custom compared to the sequence editor own right?  I want to make sure that I have a good list of all of my modified files I create a CD of deployment of work later on the road.  I'm assuming that to change the visible categories in the interface custom user won't change their visibility in the application of the sequence editor.

  Personalization step insert palette changes affect the sequence editor and the user interface. The settings are stored in testexec.ini in the cfg directory.

  You can hide the adapters using the card configuration window in the config menu

  You can simply keep separate versions of your testexec.ini, one for when you want the customizations and the other for when you don't have, assuming that you do not use the machine even for both. If you use the same machine for both you can implement some sort of automated way of switching on which version of the file that you are using.

  Hope this helps,

  -Doug