Customize the models of questionnaires of captivate radio buttons

Similar Questions

• jdev11 - how the code filter additional liaison with radio buttons?

  Using JDev 11.1.1.0.2, ADF BC for model, ADF Faces JSF to view, deploy to WebLogic 10.3 appserver, database Oracle 11
  
  I asked for help (a do my work ask), that I'm the only developer JDev in our shop, and I looked at this problem too long and now have obscured the problem. I don't really want the answer (rather the skills needed to solve this problem), but it will ;-)
  
  Installation program:
  ExecwithParam base where the logic is stored in the AppModule. At this point, there is only a single binding TechID variable, which is passed to four of your different and updates the where clause and calls on each VO of the AppModule executeQuery. Works great so far!
  
  Need:
  Add additional time based filter: Group of buttons on the Radio for the last 30 days, 60 days, 90 days, choose a date. If choosing a date is sΘlectionnΘe, then the user selects a date with a date picker, and all records by this date are used.
  
  Support:
  There is a date variable in each query, and a common type of DATE filterDate may be added to each to filter with somedatefield > =: filterDate in each VO
  
  Thoughts:
  I like to break things in simple parts, so how about starting just the radio button.
  My thinking goes like this:
  Add another variable of filterDate liaison to each of your. Add this to the App Module.
  
  So, how can I set up a radio button so that I can get the value of the selected and then button that convert a SYSDATE - value and which use th e App Module logic? I continue to think of the big picture end of case and forget everthing. I know that's not difficult, but just ask me for some advice.
  
  At one point, I was thinking to add a clove of support to the option button, then wasn't sure if it was the best way and don't know how I would get the value in the AppModule. Part of the problem is that I came across a mental block. If I add the components that aren't linked data, as a selector of dates, or checkboxes, radio buttons, etc.. How can I get the values in the AppModule? I've seen many examples of data to related components, but do not know how to mix and match the binding with just a rich component controls base such as an input control. (This may better ask in a different thread).
  
  Finally, what of the big picture, the part about the addition of the datePicker - of ideas?
  
  Like cable TV, characters hosted - the kind that are related in my case the code! (Reference of American humor, must be familiar with USA cable TV channel (I'm addicted to the show House))
  
  Thank you, Ken

  Ken,

  A small correction to your last sentence - you don't want to refer to the support of the AM bean - you want to refer to the AM of the bean to support.

  If you want a very simple way: find the service for your AM method in the data control palette, drag-and - drop it on your page as a button JSPX. JDeveloper will automatically add a binding for the action in the pagedef. Then, double-click the button that results and create a new method of bean of support for her (in front of JDev, don't remember what we call the dialog box) - given the option, say JDev to put the code to link to you - then the resulting method should have the code that calls the method via the definition of the page. Simply add a bit of extra code to determine and set the date.

  John

• Hide the individual fields of a group (radio button) based on another field

  Looked through the archives, but couldn't find the answer, who worked... THANKS in advance.

  A form that contains a radio 2 field (named funding) group - 'Cash' or 'other '.

  The group following (FinancingType), which is independent now, is a group of radio buttons of the 5 field - "Cash", "FHA", "GO", 'Classic' and 'other '.

  "Cash" is selected in the first group, I want to [FinancingType]. Button of Cash to choose (what I work via a trigger MouseUp)

  If (event.target.value == "Cash).

  this.getField("FinanceType").value = 'Cash ';...

  However, I want the other 4 fields greyed out or hidden.

  In addition, if the radio button "Other" is selected, I want to [FinancingType]. Button of cash to be gray or hidden.

  (ps. I know just enough coding to get in trouble!)

  Yes, you can. The code would be:

  this.getField("FinanceType").readonly = true; or false, change it back

• Create the form in word with checkboxes, radio buttons, comment fields and signatures

  A couple of years, I have created a form that has been filled with some radio buttons and checkboxes, then sent for signatures. Example below:

  Project owner : {{                   $ReqName}}			{{I0}} {{K0}} Udio has
  Project Manager: {{$K1}} {{$K2}} {{$K3}} APPROVED REVISE and resubmit DENIED {{SBlk1_es_:signatureblock: signer1}}

  {{#ReqName = * RequiredName_es_:sender}}}}

  Is it still possible to use, or should I drag-and - drop all the buttons?

  Hi sarahm62404467,

  Yes, you can do it with services eSign, but central form is abandoned.

  Kind regards
  Nicos

• Change the background fill color based on Radio button selections

  Hello

  I am very new script in LC, so I hit a wall on my last form. I am creating a form with a scale of 'leikert-like', however one of the stipulations (from my boss) is in this context of buttons are to be filled based radio which button is selected.

  For example, Question 1 has 4 radio buttons to choose: poor, fair, good, great. If the person completing the form selects poor, I wish the poor to fill background color. If someone chooses right, I would like to than this background color to be filled, as well as the background of the poor. Good selection would fill the colors of good, fair and poor; and selecting the big would fill the four colors.

  Someone has ideas of how / if possible? In my first tests, I got the button itself to change the colors, but not the background fill (which can be changed manually on the border palette).

  Any ideas would be much appreciated. Thank you!

  Aaron

  Here is the code that you can use in the event of modification of the ExclusionGroup (title default RadioButtonList) object. It is the parent of each individual option button object.

  for (var i=0;i
  This also assumes that the value of each option button is sequentially numbered from 1 to however many boxes option you have.
  Now, here's the thing. I'm assuming that each radio button has a different color. You might code for the colors yourself in JavaScript, but I manually chose the colors through UI Designers. Once all the colors of radio buttons have been defined, select a radio button and go see > XML Source. Where we see the element, add the presence of the attribute = "hidden". Do this for each option button. Here's what I mean:
  
                    
                    
                       
                        
                          
                       
                    
                    
  
  Kyle
  		   

• With the help of text boxes and radio buttons

  Hello!

  I tried to make a small Manager application where the user writes his name is on a TextBox and selects her sex between the two options in radio buttons (female or male). These information apears inside a text on another screen. I tried desperately to organize the code to make this work, but I haven´t successful.  Anyone of you Director community could help me with this give me an idea of how do to solve this problem?

  Thank you very much!!!

  Philippa

  I have downloaded a file that shows what you are trying to do - feel free to use all or part of it. Sorry, but I was not taking the time to comment the code for you - if you have any questions, ask at your

• How can I change the value of a group of radio buttons to a bidding process?

  I have an interactive report on page 1, and I'm passing the value of a column to the page of the two group of radio buttons.
  
  I wish I could switch this radio group and pass the parameter currently displayed in the submission process:
  
  #OWNER #. (CHPWD)
  PUSERNAME = >: P2_USERNAME,.
  PPASSWORD = >: P2_NEWPASSWORD,.
  (PUNLOCK = >: P2_RADIO_LOCKED);
  
  : P2_RADIO_LOCKED is not acquire any value that I can see.
  
  Published by: xerosaburu on August 17, 2009 15:07
  
  Published by: xerosaburu on August 17, 2009 15:08

  Hello:

  You could modify the code for the page process of implantation of the rocker.

  begin
  #OWNER#.CHPWD(
  PUSERNAME => :P2_USERNAME,
  PPASSWORD => :P2_NEWPASSWORD,
  PUNLOCK => :P2_RADIO_LOCKED);
  select decode(:P2_RADIO_LOCKED,'1','2','2','1) into :P2_RADIO_LOCKED from dual;
  end;
  

  CITY

• Customize the model of recurring Dates not to pick up the changes.

  Hello
  
  Process Planner, I have a set recurrence in place with the custom dates. This recurrence has worked well throughout 2009, but now that I have deleted the dates of last year and has added dates for this year it is not working properly. When I'm planning a query using this modified recurrence it only schedules the last date (December). Recursion is implemented to plan the next instance at the end of the last. I'm used to make the query work immediately and you have an example for the next date set.
  
  Help is greatly appreciated!

  KB ID 659082.1:

  PARTICULAR to: company, PeopleTools 8.48 +.

  Symptoms:
  Once a definition of recidivism has been configured to use the option "Run on specific dates", at the time, the processes are not queued for the first date. Instead, processes are put on hold for the last date in the sequence.

  Solution:
  It is a known issue and development has included the fix in tools 8.50.

  REPORT ID: 1631169000

  WORKAROUND SOLUTION:

  Once the processes are queued for the last date in the sequence, change the RUNDTTM field based on the number of process instance newly attributed in tables below the Planner: PSPRCSRQST and PSPRCSQUE by using the following sql statements.

  (1) UPDATE PSPRCSRQST SET RUNDTTM = "first date/time in the sequence" WHERE PRCSINSTANCE =' newly allocated process #'
  (2) UPDATE PSPRCSQUE SET RUNDTTM = "first date/time in the sequence" WHERE PRCSINSTANCE =' newly allocated process #'

  Once the RUNDTTM has been updated to take account of the original race time/start date, subsequent iterations using the affected recurrence will pronounce as planned according to the time/dates.

  Kind regards
  Bob

• Customize the FlexUnitApplication.mxml

  Hello!

  I'm trying to customize FlexUnit tests through Flash Builder 4.6. The main problem is to customize FlexUnitApplication.mxml.

  I want that Flash Builder generates by default FlexUnitApplication. Can anyone suggest where to find the model at this mxml?

  Thanks for any help.

  I'll answer my own question.

  The model is embedded in the java code in flexunit.jar. So one way to customize the model FlexUnitApplication.mxml is decompile this pot, change it and recompile.

• Change the model of phone using BAT button

  Hello

  Is it possible to use BAT to change the 'model of phone button' which is attributed to several phones?

  You cannot use BAT for updating the model of phone on existing phones button. However, you can set up the model of phone button on phones that you add by using BAT, so you can export the phones that you want to change, remove them from the CCM and add them using bat with the model of phone updated button.

  I hope this helps. If so, please indicate the position.

  Brandon

• Deactivation / activation of the Radio buttons

  Hi all

  I develop application in Oracle Application Express 5.0.0.00.31.

  In my page, I created a tabular form by using the query

  SELECT

  "ROWID",.

  'EMPNO ',.

  'ENAME ',.

  'STATUS ',.

  "ACCEPT."

  FROM "EMP".

  STATUS and ACCEPT two columns are type of radio button with a static query as

  STATUS: STATIC2: new; N, entitled; A, completed; D

  ACCEPT: STATIC2: accept; F, rework; R

  My requirement is

  1. When STATUS =has ' this time then ACCEPT column boxes must be activated. (I)

  2. another in('N','A') of STATUS then ACCEPT column buttons Radio must be turned off

  Note: Later I hide status column. Accept that column must be specified. Based on the value of the STATE Accept column column

  Radio buttons work
  

  I put my sample application in

  https://Apex.Oracle.com/pls/Apex/f?p=28020

  workspace: myspace77

  user: comments

  password: apex_demo

  -What someone will help me in this regard?

  Thanks in advance.

  Kind regards

  Colette

  Hi Colette.

  Check your Application-> Page 1 28020. I've implemented the toggle the radio button.

  Here are the steps to accomplish the toggling the buttons in table form:

  • Added STATUS column with alias STATUSD in the form of your table.
  • Added real action "Run the Code JavaScript" in your dynamic action "updating of the form: turn radio buttons:

  Action: Run the JavaScript Code

  Fire on loading the Page: Yes

  Code:

  $('th#STATUSD').hide();
  $('td[headers="STATUSD"]').hide();
  $('td[headers="STATUSD"]').each(function() {
      var row_val = $(this).text();
      var row = $(this).closest('tr');
      if (row_val == 'N' || row_val == 'A') {
        row.find('td[headers="ACCEPT"] input[type="radio"]').attr("disabled", true);
      } else {
        row.find('td[headers="ACCEPT"] input[type="radio"]').removeAttr("disabled");
      }
  });
  

  Assigned items: no

  Kind regards

  Kiran

• What to put in the xsd schema for the form of the ADF radio buttons?

  Hello, we create a form generated from the data of a HT ADF auto which is a type defined in a schema .xsd. Which schema component Let's in the .xsd schema correspond to buttons option in the form of the ADF? For example, in our .xsd we just

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < xsd: Schema container = ' http://www.w3.org/2001/XMLSchema "xmlns:wf =" " http://www.example.org "

  " targetNamespace = ' http://www.example.org "elementFormDefault ="qualified"> "

  < xsd: complexType name = "FormDataType" >

  < xsd: SEQUENCE >

  < xsd: element name = "FirstName" type = "xsd: String" / >

  < xsd: element name = "Name" type = "xsd: String" / >

  < xsd: element name = "Department" type = "xsd: String" / >

  < / xsd: SEQUENCE >

  < / xsd: complexType >

  < / xsd: Schema >

  What would be the element / type etc be for radio buttons?

  Hi Tali,

  It depends on what you want to do with radio buttons, but it would be better to be a part of string in most cases.

  This could be better handled on the ADF OTN forum, but I'll take a shot at it.  If you have many items to choose from, you can use the string "Department", you already have in your XSD.  When displayed on the form, include various departments with radio buttons next to each other (for example,"manufacturing", "Marketing", "Sales").

  Because this is the BPM forum, I guess your XSD is used as data for a human task which in turn used to create a form of the ADF.  If this is the case, you can use your "Department" in your XSD string element that has already been placed on your form as a text input field.  The reason is the link that you need to update the element of the human task service is automatically created in this way.  Select this field to text, and then in the properties panel, copy the text that is in the 'value' of the field (you stick it in the Value property of the Radio group you will add in the next step).

  There are two ways to get the radio buttons on the form.  You might drag the "Radio group" widget on the form-> click on radio to 'Create a list (select an item)' button-> click the Add icon to add the choices you want to appear on the form (for example,' manufacturing ', 'Marketing', 'Sale').   Once this was added, paste property value text you copied in the previous step into the field of "Value" property of the new Radio group.

  If you select the radio button of the new group source, it should look like this if you wanted two choices for your radio buttons:

  After this has been added, delete the existing text entry field that was created when the form was generated automatically from the human task.

  Hope this helps,

  Dan

• How can I count the number of filled Radio button groups?

  Hello

  I am working on a form that some calculations. The form contains ten groups of option buttons. Part of the necessary calculations is to multiply the number of times 10 filled radio button groups. I need the form to add groups of how the user is finished. So if the user has ticked a box in 7 groups, but not in the other 3, then the value could be set to 7, then later multiplied by ten. I have no problem with the multiply by ten party. I need help to find a way to get the total number of groups done button.

  I think I could get by if I could test if a field group includes a box ticked or not. I could work with this base script:

  var v1 = + getField("Section_1").value;

  If (v1 < 0) {}

  Event.Value = "rubbish";

  } else {}

  Event.Value = v1;

  }

  But it does not work. Does anyone know how to test if a button group has a value? Or how to test if it is "NaN"? Or if not how to calculate the total number of groups button? Any help would be greatly appreciated. I did some research for it on other forums but have not yet found a thread for this topic. Apologies if I forgot the advice in this topic.

  The following code works. I don't know if it's the easiest or most efficient way, but it does the trick:

  var T1 = 0;

  var v1 = + getField("Section_1").value;

  var v2 = + getField("Section_2").value;

  var v3 = + getField("Section_3").value;

  var v4 = + getField("Section_4").value;

  V5 var = + getField("Section_5").value;

  var V6 = + getField("Section_6").value;

  v7 var = + getField("Section_7").value;

  var V8 = + getField("Section_8").value;

  var = v9 + getField("Section_9").value;

  V10 var = + getField("Section_10").value;

  If (v1 > = 0 & v1)<= 5="" )="">

  T1 = t1 = 1;

  }

  If (v2 > = 0 & v2)<= 5="" )="">

  T1 = t1 + 1;

  }

  If (v3 > = 0 & v3)<= 5="" )="">

  T1 = t1 + 1;

  }

  If (v4 > = 0 & v4)<= 5="" )="">

  T1 = t1 + 1;

  }

  If (v5 > = 0 & v5)<= 5="" )="">

  T1 = t1 + 1;

  }

  If (v6 > = 0 & v6)<= 5="" )="">

  T1 = t1 + 1;

  }

  If (v7 > = 0 & v7)<= 5="" )="">

  T1 = t1 + 1;

  }

  If (v8 > = 0 & v8)<= 5="" )="">

  T1 = t1 + 1;

  }

  If (v9 > = 0 & v9)<= 5="" )="">

  T1 = t1 + 1;

  }

  If (v10 > = 0 & v10)<= 5="" )="">

  T1 = t1 + 1;

  }

  Event.Value = t1;

• Disable the Radio button under condition does not work well

  Hi friends,
  
  I have three radio buttons
  
  < li > cottages
  < li > New rental
  < li > in the name of
  
  
  I'll show this option button conditional according to the user who connects to the application.
  
  Suppose that, assume that if a person 'A' concludes the application means that it will be shown only these radio button options---NH---,---OB---,---Self---
  
  Assume that, if a person 'B' concludes the application means that it will be shown only these radio button options - NH-, - free-
  
  If a person "C" concludes the application means that it will be shown that these radio button options - Self-
  
  
  I limited the boxes according to the users who enter the application using their roles.
  
  But my challenge here is once the user and if it someone at - it means radio button, select
  
  Example if he chooses - NH - means, then - OB - and - holiday - radio button must disable and if he chooses - OB - means then NH - and - to
  Disable (vice versa).
  
  I have also done the same with the DA.
  
  With the real action like: javascript Expression I gave the following encodings (I wrote the below DA for the three cases, if the request_class_code is equal to)
  (NH, O, S)
  

  var enabled=$v('P22_REQUEST_CLASS_CODE');
  if (!$u_SubString(enabled,'S')) $('#P22_REQUEST_CLASS_CODE_2').attr("disabled","disabled");
  if (!$u_SubString(enabled,'NH')) $('#P22_REQUEST_CLASS_CODE_0').attr("disabled","disabled");
  if (!$u_SubString(enabled,'OB')) $('#P22_REQUEST_CLASS_CODE_1').attr("disabled","disabled");

  The DA above works great only for the user who has the possibility to view the three radio buttons in my form (i.e)(NH,OB,S).
  
  For the user who has the ability to view two or one option button, it does not work properly (i.e.)(NH,S) or(OB,S) or (S).
  
  Why it does not work for the user with two options or with a radio button medium, the source of this property of radio button option is changing. Given that I took
  the source of my radio button in my DA only when the three options are present.
  
  How I can solve this problem for the user who is having this option two or radio.
  
  We hope to hear you clearly on the issue.
  
  
  Brgds,
  Mini

  Hello

  If I did not understand what you have that might work

  var lVal = $v('P22_REQUEST_CLASS_CODE');
  $('#P22_REQUEST_CLASS_CODE input:not([value="' + lVal + '"])').attr("disabled","disabled");
  

  Kind regards
  Jari

  http://dbswh.webhop.NET/dbswh/f?p=blog:Home

• Script to detect the moment when a radio button is clicked / digital signature signed

  Good afternoon

  What is the syntax to detect whether a radio button is pressed or a digital signature field is signed?

  What I want to do is to fill in a field if the user clicks a radiobox and the user signs the form doorwindow.

  My radio boxes follow the pattern

  Group name: Group 1

  Name of choice: A, B, C, D

  Field name digital signater: boss

  Script project

  If (Group1. A == {True and this.getField("boss') .signed)

  this.getField("x").value = thisgetField("y").value

  {

  I know that the syntax is far away, but I'm trying to honor a task like thie described above.

  You don't specify what type of field 'x', but assuming that it is a text field, you can use this code as the code customized for her:

  {If (this.getField("Group_1").value == 'A' & {this.getField("boss").value! = ""})}

  Event.Value = this.getField("y").value

  } else event.value = "";

  Be aware that JS is case-sensitive, so if the name of the Group of option buttons is "Group 1" and not "Group 1", you will need to change this in the script.