Cut and past. How to choose which files will be passed first?

Similar Questions

• Photoshop CS6: image is too large when cut and pasted on a new file window.  I'm cut a picture of 2 x 3 on a new file, and it reads like 8 x 11 or more. How

  Photoshop CS6: I cut and paste a small part (2 x 3 inches) of an image on another new file window (8 x 11).  The transferred image appears huge. If I reduce the size, the whole image and reduced background, not only the image. How can I keep the image of 2 x 3 and keep the size of the canvas of 8 x 11?

  Thank you

  The transferred image appears huge

  Caircraft are 2 x 3 image is higher resolution than your 8 x 11 file.

   
  Change the resolution of the 2 x 3 to match you res 8 x 11 before you copy it to the new file or

  Choose this layer in the copied file and then edit > transform > scale. Be sure to hold the SHIFT key while you move the handles to angle to maintain the proportion.

  If your copied file appears even more of your 8 x 11, see angle of the scale handles, press Cmd + 0 (which is zero) to display the handles

• I created a file user.js to cut and paste. The site I'm making this function is a "moodle" and so the URL change ++. Is there a way I can allow cut and paste, which is not specific URL?

  I see that I can enter multiple URLS in the user.js file, but I can't know all the possible URLS I use because of the Moodle application. Is there an easier way for me to cut and paste?

  You can try this extension:

  • https://addons.mozilla.org/firefox/addon/852 - AllowClipboard Helper

• Missing file all cut and paste

  I was going to spend a few videos of the files from a folder to another using copy / paste. I choose the files, right click and click on cut, select the folder 'target', right click again, but by mistake, click on the bar collapse. All the files in the folder 'target' is missing now and these files which I cut the older file.

  I did the search ahead and find the names of these files (C:\User\Username\AppData\Roaming\Microsoft\Windows), but I can't use those video files anymore. Can not copy and even play.

  How can I get my files as these files is video of the early days of my son.

  Hi Dina Sylvia,

  If you have not copied anything else, you can return to where you were and right click and choose Paste.

  If you do not paste the files anywhere, you should also be able to restart and Windows will "let go" of the files held in the queue.

  In addition, check the Recycle Bin and see if they went in there.

  Please let us know if we can be of further assistance. Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to cut and paste ppt slides in presentations?

  How to cut and paste ppt slides in presentations?

  File > open

  and it should do the conversion for you.

• When I cut and paste a subfolder of an excel file, the files in the subfolder are missing

  When I cut and paste a subfolder (which contains the files) to an excel file, the files in the subfolder disappeared. I didn't then properties and wer there are no previous versions of the files. Also note, glued folders are there but not files

  What version of Excel you use (Excel 2003, Excel 2007 or Excel 2010)?

  This problem occurs with a specific folder?

  Is the Excel file that is saved on a network or on the local computer?

  Check if the files are hidden, for any information to show all hidden files, you can check the link below:

  http://Office.Microsoft.com/en-us/Excel-Help/view-all-hidden-file-types-and-file-name-extensions-HP005195524.aspx

  Excel application doesn't have any role in cut\paste of files even if the files contain Excel documents.

• How to use cut and paste to import photos

  How can I use cut and paste to import pictures from a SD card on Windows 7?  Windows 7 has no AutoPlay.

  It works in the same way as for any file:

  1. Use Windows Explorer to open the folder on the SD card where your photos reside.
  2. Mark the pictures you want to copy.
  3. Press Ctrl + X to cut (or right click / cut)
  4. Use Windows Explorer to open the folder on the hard drive where you keep your photos.
  5. Press Ctrl + V to paste (or right click / Paste)

• How to cut and paste the image of the body of the received email

  I'm trying to cut and paste an image included in the bottom of an email and insert it into a Word document so that you can size and print. I can highlight, cut it with Ctrl C, paste it into the document Word with Ctrl V, but the image doesn't show, although the picture frame appears when I click on the place where the photo was pasted. Framework, but empty, no image. Any thoughts?

  Thanks to everyone for their help.

  The problem has been resolved - to try and finally understand everything.

  If you encounter this problem, it is perhaps because, unless you know the file format of the inserted picture, programs can not figure it out for you. Place your cursor on the image, right click and save the image under a .jpeg instead of simply copying. Then work with the file .jpeg in any photo management program you use normally - or even insert it in Word.

• Can I make the recognition of text on PDF files in order to be able to cut and paste on their part on my iPad?

  can I do the recognition of text on PDF files so that I can cut and paste on their part on my iPad?

  Hi Stuart,

  You can perform the OCR using Acrobat desktop approx. You can copy - paste PDFs on the iPad but not to cut-and - paste text.

  Kind regards
  Rahul

• In one of the inDesign tutorials instructor pulls up what looks like an application bar that contains among other things a text editor to cut and paste the copy into the inDesign project.  That is a feature of inDesign, and how is it accessible?

  In one of the inDesign tutorials instructor pulls up what looks like an application bar that contains among other things a text editor to cut and paste the copy into the inDesign project.  That is a feature of inDesign, and how is it accessible?

  The instructor used the App Switcher on Mac to switch to a text editor and copy this text editor text. InDesign is not the active application.

• Cut and paste files

  All those who use VMWare Player could cut and paste the files on a DVD RW drive on a comments system? Thank you.

  ODA

  ----------------------------------------------------------------------------------------------------------------------------------------

  14/01/2011

  Found a solution for the "DVD RW cut and paste problem" in my Windows XP feedback system.

  Installed the package free writing Drag2Disc software for Windows Vista (32 bit, 64 bit), XP (32-bit, 64-bit) of IBM/Lenovo on system invited and formatted a DVD disc.  Everything seems to work fine on the DVD RW drive systems of the host and the guest.

  The available Drag-to-Disc packet writing software can be downloaded from the following site:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo & lndocid = RAHUL-40970

  Thanks for the suggestions everyone.

  ODA

  you set up the writer as IDE

  in my experience, you must configure it as SCSI
  See http://sanbarrow.com/vmx/vmx-cd-settings.html

  even then, I'm not sure if the packet writing is supported - software for CD burning ordinary as Nero and others should work well

• How to cut and paste text in the css code in dw cc?

  How to cut and paste text in the css code in dw cc? I have only licensed a few days ago, it worked fine in trial! Thank you...

  Copy the code into Notepad (Windows Machine) or MAC (copy in texteditor) & pasting in DW, I think that his work.

• Impossible to make the cut and paste it into all programs

  Original title: I run Vista on a Viao and lost my cut and paste ability, in all programs, in Word and Internet...  Any ideas of how I can retrieve this function?

  Any thoughts?

  Hello

  1. what exactly happens when you try to copy / paste?
  2. do you receive any error messages?
  3. did you of recent changes on your system prior to this problem?

  Method 1: I suggest to try the steps mentioned below and check if it helps to solve the problem.

  Step 1: Start the computer using safe mode with networking.

  (a) Remove all floppy disks, CDs and DVDs from your computer, and then restart your computer.
  (b) If your computer has a single operating system installed, press and hold the button F8 as your rebooting the computer.
  (c) you need to press F8 before the Windows logo appears.
  (d) if the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  (e) in the display Advanced Startup Options, use the arrow keys to select the desired mode safe mode with networking option and press enter.
  (f) log your computer with an user account with administrator rights.

  Reference: http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Check to see if the problem persists in Mode safe mode with networking. If the problem does not occur in Mode safe mode with Networking if you please try the next step.

  Step 2: Try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 3: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• Cut and paste text wrong!

  Adobe and paste text wrong!

  
  

  A simple copy / paste a civic address of a discount PDF

  
  

  When I go to paste the address in Notepad, the street address is COMPLETELY DIFFERENT!

  
  

  I just click on the text there is NO hyperlink.  The address is valid, just another branch.

  How is that possible?

  
  

  
  

  I can't be trusted to cut and paste from Adobe!
  

  PDF files can contain a lot of hidden information. You can't always trust what you see is all that is there...

  About this specific file, my guess is that someone wanted to replace the address so they just put the new text with a white background on the old text and thought which is pretty good. Big mistake. Unless you are using the redaction tool information is still there and is copied when selected, as you can see it coming.

  When I open the file in Acrobat I can clearly see and select the items of old text under the visible text. You must report this problem to the creators of the file and request a better version of it.

• Layers: Copying, cutting and pasting

  Another feature I am used that I can't live without (coming from a background of Corel PHOTO-PAINT), is the ability to copy or cut a layer with CTRL + C or CTRL + X. In Photoshop, first of all, you have to CTRL + click on the layer to select its transparency and then CTRL + C to copy the layer, but I'll tell you why it isn't ideal. First of all, it's one more step that is totally useless. Second, sometimes I want to cut the layer completely, which means storing the entire layer to the Clipboard and delete in the same process. In this way, I can just paste right back into my document if I want or I can select a different document and just paste it. I realize, you can drag and drop, but add this feature would not ruin all the existing features, and it makes sense!

  To clarify, my request is that if no mask is selected and someone hits CTRL + C or CTRL + X he copies or reduce the entire layer, and layer attached to it masks.

  Thanks for listening

  I feel that, by allowing the copy/cut of the layers in the way you propose, it would create a paradox of the Photoshop interface.

  The paradox would be: If we allow this to happen, then should we also allow the copy/excision of channels, styles, presets, accurate history, swatches & etc.?

  Pretty weird (come to think of it), it works with the railways, if... Well, maybe it's preventing them to apply this feature to the layers. Try this: open the paths and layers palettes. Create an image with a layer and a path. Then, select the layer in the palette. And select a path in the palette. Copy (or cut). There he goes: the functionality you want, but in the wrong palette ;-) Easy don't paths... but then again, the railways are not as annoying as pixels...

  As I see it, essentially (PS and I, don't know ' end other applications), elements that appear inside the pallets are prohibited for common OS operations such as copy, cut, and paste. For these operations, you must use the corresponding palette menu.

  I guess it's something to do with the maintenance of the entire uniform user interface, without "pallets of rebels behave differently from others" (well, we already have a: paths!) "Maybe thay don't want another?) And also, it keeps things simple and intuitive. Think about it: If you have so many possible recipients for content in the Clipboard, Visual reference of where you want to put to get totally awkward (imagine someone with 3 monitors, 2 of them filled with open palletes PS):

  "Allright, I want to stick this thing that I got in the paper..."

  ...

  hummmm...

  (eyes desperately scanning the monitors and editing... neck pain)

  ... ah! Gotcha, here it goes

  Heck! Come to the wrong place! Argh!

  .... ..."

  It's a chore. I don't want that. It is not always that I know what is in the Clipboard (I remember HAVE contained one like it, Kind ' a 'show' content of the Clipboard-(Hey, it's another request for devs make'em!))

  --------------------

  On a different subject:

  Some while ago, I was struggling remove some 30 masks + I had in this doc PS of the mine. Man, HOW I WISH I could CMD-select all these channels and delete'em all in a scream. At that point, I was really upset and wrote a demand function (I guess it was for CS2) about the deletion of multiple channels in the palette layers. After a few ranting I've cooled down and started to think straight, so I thought: if they do not have the aux channels on a separate palette, or do not clearly separation between the layers of color and auxiliary channels, we would never have to be able to remove multiple channels, ' cos that just don't make sense (you can select several channels , but cannot delete them. Something to do with the color channels? Guess it would be weird, but don't know for sure why. A Photoshop guru could enlighten us?

  --------------------

  Carefully read your posts, I understand that you don't like Shuffle windows. So here's a tip, where the devs don't you listen to:

  Create a new Action and assign a function key (i.e. F2).

  In the Actions Palette, select it and on the Actions Palette Menu, assign a menu item to the action. Choose "layer > duplicate layer...» "You can then select a layer or a group (works with both), press F2, and then choose the destination of duplication among all open documents. You can even create a new doc that contains only the duplication.

  It's not like you want, but close enough.