Data and security function: objects, permissions, forums, grants
Hello world!I am trying to acquire data (function and) security feature. I read "Oracle system administrator's Guide - Security", but there is no concept and relationships between the features.
I want to understand the concept, the relationship between things like objects, permissions, forums, grants.
Allows a person please forward me to a useful document that can help me, or someone can bring me the understanding of these features?
Hope for your help, friends.
Thanks in advance.
P.S.: the company requirement I need to achieve is to make a slice of data in summary PO, that only the CPAs are seen by a user.
Hello
I was working on a restricted access to similar data in the accounts payable module through the user management. However, I don't know if data security strategies are working in all of these modules. Metalink note: Introduction to the security system grants and data [553290.1 ID] security mentions to verify specific product development team to check if the applications user interfaces supports data security strategies. I'm sure that it works for Oracle HRMS, but there is no specific information about the other modules. I'm working on the issue with a few conditions and will update if I find any success. Hope to hear from you as soon as you have an update on this.
Published by: user12222085 on May 28, 2010 11:14
Tags: Oracle Applications
Similar Questions
-
How can I get the date and time function to appear as a tile
How can I get the date and time function to appear as a tile
How can I get the date and time function to appear as a tile
WIN8 are delivered with this tile/app. The only way to display the time is to launch the charm bar (Win - key + C) or mouse over to the right up/down. That said go to the Windows store... There are several free applications that display the time / date as a live tile. Good luck.
-
Description of the problem: my time and date will not work correctly. I manually change the date and time in the date and time, however, it remains to these changes. It is constant and not sporadic.
Operating system: Windows Vista BusinessHello
"I manually change the date and time in the date and time, however, it remains to these changes.
This may mean that the changes until the system is restarted? If Yes, then the problem is a flat CMOS on the motherboard battery. This battery provides a power NET that the motherboard uses to maintain the time system and the BIOS settings when turned off. When she died, the motherboard back to the factory settings, including time.
If the hour / date change so that time is running out, then it's a software problem. If the change is consistent, as always in 4-hour movement in one direction, then you must check your time zone and locale. If the time system just seems to slow down or jump around, you need to examine the software you have installed on the system as something running in the background (P2P, antivirus and distributed calculation programs are often delinquent).
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
I have this request that I can't do things. Maybe I don't think clearly, or perhaps I'm not understanding and between service dates. Hope someone can help me...
I have a FORM with 2 fields of text for users to enter dates they want. Users can enter * 060612 * and it will become * 06/06/12 *. So on the button click, I have the following codes.
As mentioned, *: control.date1* and *: control.date2* must be * 06/06/12 * and paydate field is varchar (8) and the data entered in the * 'YYYYMMDD. "select * from abc where ( to_date(trim(paydate), 'rrrrmmdd') BETWEEN to_date(to_date(:control.date1,'mm/dd/yy'),'rrrrmmdd') and to_date(to_date(:control.date2,'mm/dd/yy'),'rrrrmmdd') ) order by employee_id;
I get the error message ORA-01858: a non-digit character was found here where was waiting for a digital*.
What Miss me?>
I'm getting ORA-01841: (full) year must be between-4713 and 9999 and not 0
>
You probably have a string containing an invalid date.If the data is stored as yyyymmdd why you do a plate and using rrrr?
You get the error with this query?
select to_date(trim(paydate), 'rrrrmmdd') from abc;
If yes then 'paydate"contains garbage.
-
Archiving of data and security filters
In the version of Essbase 7.1.2, is it possible to save the disk filters or security for a given application or the database? We are several old databases to make room on our archiving server, and we have some pretty complicated filtering that would take a lot of time to rebuild if we had to do. Thanks in advance.I think a go giving the essbase advanced utility Security Manager is a good option, it is a free utility and done everything you want with ease:-http://www.appliedolap.com/free-tools/advanced-security-manager
See you soon
John
http://John-Goodwin.blogspot.com/ -
Dates and analytical functions
Here is the structure of the table:
table_1
number of user_seq
number of pos_id
End_date date
start_date date
Data looks like this:
USER_SEQ POS_ID START_DATE END_DATE
1 5 2 APRIL 2006 MARCH 15, 2008
1 10 MARCH 16, 2008
1 20 FEBRUARY 14, 2010
2 55 JANUARY 31, 1999 DECEMBER 30, 2002
2 75 31 DECEMBER 2002 14 - SEP - 2007
2 100 15 - SEP - 2007
2 555 FEBRUARY 14, 2010
The start_date on February 14, 2010 is the last assignment to a post.
I need to update end_date assignment prior to the start date of the user MAX 1 day.
For example, USER_SEQ 1 will have an end date of February 13, 2010 for registration #2.
I know it can be done with analytics, but I am little in this area.
Appreciate any help.And the update statement will look like;
update table_1 a set a.end_date = ( select dt from ( select lead(start_date - 1) over (partition by user_seq order by start_date) as dt ,user_seq ,pos_id from table_1 ) b where a.user_seq = b.user_seq and a.pos_id = b.pos_id ) where a.end_date is null
-
Formatting of dates and times of MySQL
I have a few questions that I hope you guys can help out me with...
I have a MySQL DB that includes the columns 'date' and 'start_time', 'end_time '. Date is stored as 'date' and start_time and end_time are stored as 'time '.
When formatting a date in PHP, I found this page very useful: http://php.net/manual/en/function.date.php
Does anyone know of a similar page showing the attributes that are available with the MySQL DATE_FORMAT.
Also, I currently have the query written like this:
SELECT id, title, description, DATE_FORMAT ('date', '% m/%d') AS formatted_date, start_time, end_time, location
Events
Does anyone know how I can format the columns of TIME similar to how I did the DATE columns? I once stored as '08:00:00 ' and "21:30:00" and I want displayed them as '08:00 ' and «21:00»
Any help? Thank you!The full list of formatting specifiers is in MySQL documentation at http://dev.mysql.com/doc/refman/5.0/en/date-and-time-functions.html#function_date-format.
Use DATE_FORMAT()) for your time columns.
DATE_FORMAT(theTime, '%l:%i%p') AS formatted_time
I think MySQL is using AM and PM. If you want to lower case, just pass the result of the database to strtolower():
-
Custom objects: current date and spreadsheet
On another normally functioning form, there are two custom objects, the two fields of current Date, appearing not at all
When I merge data files into spreadsheet in Acrobat X Pro. The two fields have the value calculated reading alone and execution property
current Date/time. Is it possible to include the value of current Date/time when the file is merged into a spreadsheet, maybe
with the script editor? And why not a current Date field is displayed in a spreadsheet?
Hello
Once the binding of an object is name / Normal, then it should participate in the export to the worksheet. If you drag an object CurrentDate, she taps into the custom; Select it and go to object > liaison palette, you will see that the link is set to None / N ° of data binding.
If you want an object to export, you must set the binding.
Niall
-
I have the latest version of firefox to date (15/10/2014 v32) and I still get messages while on various sites Internet (Youtube, Google, Gmail), telling me that your Firefox is out of date and may contain a security risk.
I have not even this message on the support pages of mozilla.org?
I tried the subject: config reset the useragent (s) fix, but it does not work.
I tried browsing in safe mode and still get the error.Why this false/positive happening?
Thank you
Hello your useragent (information, the browser sends to websites to identify its version) - apparently by mistake - shows this:
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20140923 Firefox/4.0.0; xs-A30GTmfXR3o;CkHZPf;
probably some kind of unwanted software has crashed it. Please refer to this article in order to reset the user agent settings in firefox:
Sites Internet says that Firefox is obsolete or incompatible, even if it's the latest versionin case this is not enough, please try to reset the whole browser:
Firefox - modules to reset and refresh settings -
play sounds temporary and file of your choice when reading data with VISA functions?
Hello.
I read the function of reading data with VISA and then I use as multiple functions to display data on the graph. everything is OK.
now, I want to play a sound specified (like a song in my desired folder 3s) signal which cross above the specified value range. then after the desired time, it will wait still new cross above the specified value and this repetition of the procedure until I stop the program.
Data MCU is from and it does not stop when his game system and what system of incoming data for this part (his play) will ignore them pending that outdated.
I use this for reading data and part VI mentioned which belongs to her is empty and I don't know what I have to do?
altougth I use an another while loop for his apartment because I want to save time CPU.
Thank you.
I recommend you do the data type of the notifier a cluster that contains a path and a numeric (double). The path indicates the reader what file to play. Digital is the duration.
Now in a way a bit complicated, but really good stop your second loop. Do not use a second notification. Instead, send the normal notification but not use a path for the path in the cluster. Your second loop can write a check for the path of a not and stops when that is received.
-
Windows Azure: security of data and the location of the servers
I am not yet familiar with Windows Azure, so my apologies in advance for this look, especially if my questions are novices.
I want to deploy my business transformation engine and database on Windows Azure, and I want to clarify one or two things in this regard.I prepare the Documentation of the privacy / security for my new business and would like to understand what would be fair for me about privacy and security with Windows Azure...(1) there will be some interest in my clients 'how' my data is stored. I found several links to ISO27001, etc., but y at - it a page that describes the security of data held by Windows Azure?(2) my company will be based in Australia, and our laws require the consent be obtained from customers if we are send or contain personal information outside the Australia - so I'm curious to know what I can say about "where" their data will take place. Is there something I can do in this regard? Is it true that data 'will be stored in Australia', "won't be stored in Australia", or "will be stored on different global servers, their locations not identified" (which is probably an element of extra security in itself), or something similar?Kind regardsI am not yet familiar with Windows Azure, so my apologies in advance for this look, especially if my questions are novices.
I want to deploy my business transformation engine and database on Windows Azure, and I want to clarify one or two things in this regard.I prepare the Documentation of the privacy / security for my new business and would like to understand what would be fair for me about privacy and security with Windows Azure...(1) there will be some interest in my clients 'how' my data is stored. I found several links to ISO27001, etc., but y at - it a page that describes the security of data held by Windows Azure?(2) my company will be based in Australia, and our laws require the consent be obtained from customers if we are send or contain personal information outside the Australia - so I'm curious to know what I can say about "where" their data will take place. Is there something I can do in this regard? Is it true that data 'will be stored in Australia', "won't be stored in Australia", or "will be stored on different global servers, their locations not identified" (which is probably an element of extra security in itself), or something similar?Kind regardsWindows Azure Storage is geo-localized, means that you can select the region that you want to store your data. But I doubt if they have Australia as one of their geo location. While selecting the geo location of your server, you can find the locations in the drop down bar.
In my view, that storage locations are located in the United States, Europe and Asia at the time of this comment. Please cross check with Azure Support for the latest information.
-
Is function like the function of date and time picker in the ICB 8.5?
I need the function as "date and time picker control" used in activeX, but my operating system (windows 7 Bits without office software) is not the «Microsoft date controller» and time picker I am looking article in the internet which mention this register the MSComctl2.ocx in the windows\system32, but he could not operator in my operating system (it's not allow to save the controller). Help me, please.
Already, I discovered that the problem on the service of DTP in the 64-bit Windows 7 could not used. Because, the DTP is 32 bits, it should use the administrator to register the 'mscomct2.ocx file' which must be replace in the % windows/SysWOW64 and used the 'mscomct2.ocx regsvr32.exe"in console windows.
-
Get the name and the data type into an object?
Hello
I would like to know if there is a way to get the names and the types of data encapsulated in an object of labview?
For example, let's say I make a simple object, called myObject to be commonplace, with private data: myObjectName (string), myObjectValue (int 32) (etc.)
So, how to build a method to return the type of the data of myObjectValue, or infact back the names and types of all data in the object field, which could be a lot?
Thank you
Paul.
-
DB2 code: today's date and the day to ORACLE function?
Please help me to convert this code oracle...
DB2 code:
[code] ((Current date) - day (date (current date))) [/ code]
I tried to use the functions of default in PL date timestamps, but it won't work. Help, please.
As told by BluShadow and rp0428, you can execute the following statement:
Select current_date, trunc(current_date,'MM')-1 day of double;
The output will be today's date and the month last, last day.
-
Hello
I want to give as open & export to the level of permissions.
How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?
For example, if the group permissions, inturn should reflect on the users.
Please help me.
Thanks in advance,
A.Kavya.
Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD
And I think that you mix you two things which are managed in different places:
) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box
(b) functional privileges controlled through "Manage privileges" under "Administration".
Maybe you are looking for
-
Why my new macbook air does not freeze when watching videos on Youtube?
I bought the Macbook Air a few weeks ago and all I have installed MS office and nothing else. The problem is when I watch videos on Youtube, the macbook freezes for more than 20 minutes. (I always have to stop it at this point or an earlier version s
-
Why in my iphotos should I "4 568" in my photo section but in events I "6 091" should not be the same number in both sections. Im confused?
-
Re: I NB200-12R, I really need help on recovery!
I bought my Nb200 - 12R For UK and right now I live in Egypt while everything was fine until I installed Partition magic 8.0 I got and error and I thought that its not important so I pressed OK, then my phone restarted I lost the D Partition, then re
-
can someone help me with a problem of update, error 800b0100 code pops up whenever I try to install the bloody thing, its an update to windows vista num kb973687
-
enum via code possible increment?
Hello I have an enum on my front, but I want to increment this code, and do not use the buttons on the front panel. Someone knows how to do this? Thank you GOOSE