Data move error

Similar Questions

• Data Mover Peoplesoft HCM 9.2 error

  Hello

  I try to install Peoplesoft HCM 9.2 demo on Virtual Box. When executing the < SID > .ora (PSHRDEMO. ORA) file in data mover, the process fails when it tries to execute the statement ENCRYPT_PASSWORD *; All the previous installation steps performed without error.

  Error message: process aborted. Perhaps due to the JVM is java class not available or missing or blank password.

  I checked the psoprdefn table and the password (field operpswd) is met. I installed the JDK (Oracle JDK 7 55 of update for Microsoft Windows (64-bit) x 64) that came bundled with HCM 9.2 on delivery.

  Searched the web but found no solution. Creates a new 9.2 and loaded with old JDK VM comes with HCM 9.0, still the same error.

  Kind regards

  SID

  Please find below the solution provided by oracle and a workaround suggested that the user:

  action mod: Sorry, but the copy & paste MOS is not allowed, the content removed>

• kernel data inpage error spaceport sys

  Hey

  I just got a new pc, and whenever I stopped and it starts up again, I get an error: kernel data inpage error spaceport sys

  and the computer just start windows normally.

  What to do / how to fix it?

  Good morning Martine.

  For more information, see the error below:

  -+------------------------------------------------------------------------------------------------------------------

  7 has error checking, {fffff6fc40009b08, ffffffffc0000185, 1 c 2042860, fffff880013617ec}

  GetPointerFromAddress: unable to read from fffff80151b76170
  WARNING: Unable to verify timestamp for win32k.sys
  ERROR: Module load completed but symbols can be loaded for win32k.sys
  Probably caused by: memory_corruption

  Follow-up: memory_corruption
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: fffff6fc40009b08, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc0000185, error state (state code of e/s normally)
  Arg3: 00000001c 2042860, the current process (virtual address for the lock type 3 or PTE)
  Arg4: fffff880013617ec, virtual address that could not be paged in (or PTE contents if arg1 is a PTE address)

  Debugging information:
  ------------------

  Error_code: (NTSTATUS) 0xc0000185 - peripheral of e/s reported an IO error.

  -+------------------------------------------------------------------------------------------------------------------

  It seems that you have a bad hard drive or RAM module in your new system (ran 6 hollow landfill WinDBG), since it is a new system, I would bring her to the store you bought and let replace it.

  Read this guide on how to test your RAM Modules: http://www.pcadvisor.co.uk/how-to/pc-upgrades/3432631/how-check-for-bad-ram-modules-in-your-pc/

  Read this guide on how to test your hard drive: http://pcsupport.about.com/od/toolsofthetrade/tp/tophddiag.htm

  Personally, I'd suggest to return the computer to the store and allow them to correct the problem, apparently not driver related to me (especially if you updated all..), it seems that you have a malfunction of the equipment.

  You can try and run CHKDISK (http://windows8themes.org/how-to-run-chkdsk-in-windows-8.html), but I suggest you RMA your system and let check the RAM and hard drive.

  If however, you want to ensure that it is not Windows, then reinstall Windows and see if the problems come back, but I bet they will be.

  I know this answer might not be what you want... but...

  Yuri

• Upgrade question when on task 2-13-8: running the utility rename Data Mover

  Currently of the problems when you try to perform this task in the wizard to change.  When Assistants change automatically runs the engine program of Application UPG_REN_DMS, that fills the Data Mover rename script.  We eventually found an error.  We really do not understand why this is happening.  We also tried to launch the application in mode of two levels and still get the same error message.

  Upgrade of renaming process started: 2015-05-13 - 09.28.31.000000 (18030,8)

  The D:\peoplesoft_update\output\HCM91to92_PI9_AppOnlyxml_HCUPG1_InitialPass\\rnupgrcdfld.dms file open failed: no such file or directory. (2 633) UPG_RENAMES. Utilities.OnExecute name: openLog statement PCPC:1231: 27

  Called from: UPG_RENAMES. Utilities.OnExecute name: DeleteFile statement: 73

  Called from: UPG_REN_DMS. PRINCIPAL. GBL.default.1900 - 01 - 01.CleanUp2.OnExecute statement: 2

  Game number of messages: 2

  Number of messages: 633

  Reason for the message: the file %1 failed: %2. (2 633)

  Treat 30055 ABENDED to step UPG_REN_DMS. PRINCIPAL. CleanUp2 (PeopleCode) - RC = 8 (108 524)

  Game number of messages: 108

  Number of messages: 524

  Reason for the message: treat 30055 ABENDED to step UPG_REN_DMS. PRINCIPAL. CleanUp2 (PeopleCode) - RC = 8 (108 524)

  Process %s ABENDED to %s.%s.%s (step %s) - RC = %s

  The AE UPR_REN_DMS generates the rnupgrcdfld.dms with data imported from version 9.2 on a previous step. It seems that EI is not able to find the D:\peoplesoft_update\output\HCM91to92_PI9_AppOnlyxml_HCUPG1_InitialPass\\ directory. Please make sure that the directory of output on the tools-> Options - general tab do not have a double slash reverse and also make sure that the directory exists. Please post another reply after the control if you are still not able to execute the step.

• Install PT8.53 with Linux problem: unable connect in Bootstrap Mode of Data Mover

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  I've been setting up PeopleTools 8,53 Instance database. Because the Wizard installation problem, I created PeopleTools 8,53 Database Instance PT853 manually. I have run the following scripts:

  (1) utlspace.sql

  (2) dbowner.sql

  (3) psadmin.sql

  (4) psroles.sql

  (5) connect.sql

  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance. I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853

  Connection type: default database

  "TCP/IP Protocol".

  Host: 192.168.196.102

  Port: 1521

  Listener: LISTENER

  Protocol: TCP/IP

  Host: 192.168.196.102

  Port: 1521

  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same as below:

  NET Service Name: PT853

  Protocol: TCP/IP

  The host of the database Machine name: 192.168.196.102

  Port: 1521

  Name of the Basic Service: PT853

  Connection type: default database

  I test the connection using 'SYSADM' and it is successful as well. This means that Windows XP database Client can connect with the server database Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover cannot connect in Bootstrap Mode using "SYSADM". Its details are below:

  Configuration manager:

  Type of database: Oracle

  The database name: PT853

  User ID: SYSADM

  Connect ID: people

  Connect password: people

  Data Mover:

  Type of database: Oracle

  User ID: SYSADM

  Password: SYSADM

  When connect in Bootstrap Mode of Data Mover, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  Based on my understanding, in the Oracle database, the Data Mover Bootstrap mode connection requires a PSDBOWNER table with a 'Database name PT853 and UserID SYSADM' entry.

  The problem is that the PSDBOWNER table doesn't have a line after that I run 5 scripts above. I am looking at runs 5 scripts one by one as below:

  (1) running the utlspace.sql script creates spaces of table 2 (PSTEMP, PSDEFAULT). This script can not create 2 storage spaces. So, I created 2 tablespaces manually.

  (2) running the psdbowner.sql script creates the PSDBOWNER table. This script creates the PSDBOWNER table successfully, but the last line by pressing "connect system/manager", had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (3) running the psroles.sql script created the roles PSUSER and PSADMIN. This script runs successfully without error.

  (4) running the psadmin.sql script creates ownerID SYSADM and ownerID password SYSADM. When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (5) running the connect.sql script creates connectID 'people' and connect password "people." This script runs successfully without error.

  My questions are:

  First of all, in the database Oracle Linux 5 server machine, when I created the instance of database PT853 using DBCA, on the management of the password for the user 'system', I unlocked it and change his password for 'system '. It causes the scripts 'psdbowner.sql' and 'psadmin.sql' got the error "username and password"? If so, how to fix?

  Second, after you run 5 scripts above, why there is no line in the table for Data Mover Bootstrap PSDBOWNER to open a session? How to solve this problem?

  Thirdly, can I just insert a line 'PT853 SYSADM' into the table PSDBOWNER for Data Mover Bootstrap to open a session?

  Thanks in advance.

  By default, the password of the population is peop1e.

  Once more, you shouldn't do anything 'manually' on the database, scripts do everything for you. Unless something is wrong.

  > When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  I really wonder why ignore the error. This meant everything that your system password is not responsible, but something else that you set when creating the database. Never happens to you to check the script before you run it and change it if necessary?

  Nicolas.

• After you install DMO of the Campus, SYSTEM installation, data mover does not show PeopleSoft HRCS Database

  Hello everyone, I did the installation of the PeopleSoft Campus (DMO) instance and it is running now. After that, I started installing the SYS instance, using the same servers: Linux Oracle (database), Oracle, Linux (application server), Windows Server (1 machine) for Installation and Crystal Reports.

  I created a new database named HRMS9SYS without errors.

  Now its time to work with Data Mover. The first task is to use Database Wizard.

  Select target ORACLE database

  type of database to UNICODE

  character set AL32UTF8

  And in the next step Peoplesoft Applications to add

  I see that people US-English database system tools

  Can anyone explain why there are no PeopleSoft HRCS Database - database of PeopleSoft HRCS and English - Spanish?

  These are the same files that I installed the DMO instance...

  Yao,

  (1) be sure that the variable PS_APP_HOME points to the right directory where HCM has been installed (check tab (default) ConfManager/profile / Edit/ProcessScheduler).

  (2) be sure that you have checked the box "Database Peoplesoft HCM" during the installation of the application. Open the HCM_InstallLog.log log file in the directory where you installed the application.

  You can have something like this:

  CHOSEN_FEATURE_LIST = database demo of PeopleSoft HCM

  CHOSEN_INSTALL_FEATURE_LIST = database demo of PeopleSoft HCM

  CHOSEN_INSTALL_SET =

  -Online this means only demo is installed and you can not go for something else (with the exception of Peopletools system database that you don't want).
  If you have a long list of features, make sure that there is something like this:

  CHOSEN_FEATURE_LIST = PeopleSoft absence management,<...snipped for="" reading,="" this="" is="" the="" list="" of="" the="" features="" you="" checked="" when="" installing="" hcm...="">, PeopleSoft HCM Demo Database, database of PeopleSoft HCM

  CHOSEN_INSTALL_FEATURE_LIST = PeopleSoft management of absences,<...snipped for="" reading,="" this="" is="" the="" list="" of="" the="" features="" you="" checked="" when="" installing="" hcm...="">, PeopleSoft HCM Demo Database,database of PeopleSoft HCM

  CHOSEN_INSTALL_SET = PT

  I tested it, if the database of PeopleSoft HCM is disabled during the installation (and consequenty not list features in the log file), there is no option to install a SYS database later.

  If this is the case, you can reinstall the app in the same directory. I don't think it will hurt.

  
  

  HTH,

  Nicolas.

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.

• Cannot log on to the application designer using id PS while able to connect in data mover.

  Hello
  
  I install peopletool 8.50 (HRMS). I ran successfully all the sql scripts. Run the script DMS as well for the demo database.
  
  When I try to log in the designer of the application using PS/PS I get the following error...
  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 404 - ORA-01017: name of user and password invalid. connection refused
  
  while I am able to connect in data mover on Starter bracelet. Can someone help me pls?

  Using Oracle 11 g?

  This could be your problem, SEC_CASE_SENSITIVE_LOGON:
  http://bloggingaboutoracleapplications.org/PeopleTools-and-Oracle-11g-installation-issues/

• PeopleSoft installation - failed to launch Data Mover

  Hello
  
  Background information:
  
  PeopleTools 8.53
  FSCM 9.1
  Oracle 11.2.0.3 database
  Windows 7 64 bit
  Oracle Linux 6.3 64-bit (on a virtual machine)
  Database demo
  
  I am doing a PeopleSoft installation for the first time. I installed all of the necessary components on my machine Windows and VM Linux on it. I created the demonstration database and when I try to launch Data Mover, I get the following error:
  
  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 12154 - ORA-12154: TNS: could not resolve the connect identifier specified
  
  I have an entry for the database in tnsnames.ora. The listener is running and I can't tnsping database. Any ideas?
  
  Thank you
  
  Maya

  I don't know what is ORACLE_HOME regarding your 32-bit client, but clearly when executing sql * more trying to get a file there tnsnames.
  Copy the existing tnsnames.ora from the first to the second directory, try again and do a report.

  Nicolas.

• Connection Data Mover &amp; Appdesigner problem

  Hello
  
  Enter below the error message mentioned in connection in Data Mover & Appdesigner
  
  "The database is free 8.51. The PeopleTools running require databases during the liberation of 8.52. ».
  
  This error message occurred after completing a 6-15-1 task: filling the Tables in the PeopleSoft database.
  
  Server details:
  
  Peoplesoft FSCM 9.1 Feature Pack 2 version request: V29133-01
  PeopleTools 8.52.11: Patch 14513380
  Oracle DB version: 11.2.0.1.0 - Production
  File/Batch/DB server: 2008
  
  Please advice.
  
  Kind regards
  Vikas
  
  Published by: 973585 on December 14, 2012 22:39

  As Nicolas says you need a short walk over to your PT8.51 database PT8.52.11 of preforms. Rel852n.SQL running is only a first step.
  As described in Chapter 7 finalization of database configuration of the Setup Guide of 8.52 PeopleTools to upgrade your PeopleTools to 8.52.11.

  I still don't understand that you have downloaded FSCM 9.1 Feature Pack 2: V29133-01 and that is comes to 8.51.
  I installed it a month ago and the same installation file was delivered to PT8.52.

  Rather than upgrade your current database to PT8.52.11, I would say to download FSCM 9.1 Feature Pack 2: V29133-01 new and recreate your database.
  Why do I say that?
  Because you clearly have an incorrect download and also missing patches that come preinstalled with FP2 review recut for this purpose.
  Download FSCM 9.1 Feature Pack 2: V29133-01 and recreate your database, this way you ensure that your installation has FP2 and all patches up to FP2 preinstalled. This will save you a lot of time...

  Halin

  Published by: Hakan Biroglu on December 16, 2012 14:17

• ORA-12705 unknown or invalid nls parameter during linux Data Mover psdmtx

  Hello. I install the following peoplesoft products:
  
  Tuxedo 10gR 3
  PeopleTools 8.52.00
  HRMS 9.10
  WebLogic 11 GR 1 material
  
  My operating system platform is oracle enterprise linux 6 (2.6.32 - 71.el6.x86_64 #1 SMP). Several houses of oracle database are in place. Oracle 9i, 10g and 11g are all installed in different places on this machine. The operating system oracle and peoplesoft to os account (ex: pshrtest2 - os peoplesoft administrator account) select or choose what version of oracle at the time of the connection; 9i, 10g or 11g. Currently, I am trying to create the HRMS 9.1, database of demonstration of peopletools 8.52 in Oracle 9i. I am familiar with the manual steps of generation of database demonstration using Data Mover (linux: $PS_HOME/bin/psdmtx). This version of demonstration via Data Mover manual step is a failure for the peopletools, 8.50.00, 8.51.00 and 8.52.00, but he managed to previous revisions of peopletools such as 8.48.00, 8.48.10, 8.49.00.
  
  Control Data Mover:
  
  psdmtx CT - ORACLE - CD HRTEST2 - CO SYSADM - CP SYSADM - CW - PEOP1E - FP dbsetup.dms PEOPLE
  
  error of the Data Mover:
  
  PSDMTX error: access code
  Reason: Couldn't sign database HRTEST2 with user SYSADM.
  
  Mover track #1
  file: datamover.trc
  
  ? appsrv.3917 (-1) [27/11/12 00:33:03] (0) used Cache Directory: / media/v02/psoft/hr852test2/PS_CACHE/CACHE/1 /.
  ? appsrv.3917 (-1) [27/11/12 00:33:04] (0) Cur #0.3917.HRTEST2 RC = 12705 hard = 0.432763 create login information = primary, HRTEST2, PEOPLE, handshake = 0000000000000000
  ? appsrv.3917 (-1) [27/11/12 00:33:04] (3) file: error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 12705 - ORA-12705: unknown or invalid NLS parameter value specified
  
  Mover track #2
  
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 PSORA initializing
  PID: 3948 TIMES: killed Nov 27 00:42:17 maximum cursor to initialize PSDB 2012 = 1024
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 environment change: NLS_LANG = AMERICAN_AMERICA. UTF8
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 initialized PSORA
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 PSORA_Initialize() nStatus = 0 0 0
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 attached to the new server HRTEST2 0 9.200000
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 cannot start session
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012: 12705 oracle error code
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 ORA-12705: unknown or invalid NLS parameter value specified
  PID: 3948 TIMES: killing Nov 27 00:42:17 PS-sqlcch (0000000000000000) 2012
  PSDMTX error: access code
  Reason: Could not sign database HRTEST2 with user SYSADM
  
  The linux operating system user account that is used to run Data Mover is, pshrtest2. Via the account of pshrtest2, I am capable of correctly tnsping the HRTEST2 database. I am also able to connect to the HRTEST2 database successfully through sqlplus as follows:
  
  export ORACLE_SID = HRTEST2
  people/peop1e sqlplus
  sqlplus people/peop1e@hrtest2
  sqlplus sysadm/sysadm
  sqlplus sysadm/sysadm@hrtest2
  
  HRTEST2 nls_database_parameters
  
  NAME
  ---------
  HRTEST2
  
  1 selected line.
  
  
  VALUE OF THE PARAMETER
  ------------------------- -----------------------------------
  NLS_LANGUAGE AMERICAN
  NLS_TERRITORY AMERICA
  NLS_CURRENCY $
  NLS_ISO_CURRENCY AMERICA
  NLS_NUMERIC_CHARACTERS.,.
  WE8ISO8859P15 NLS_CHARACTERSET
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT DD-MON-RR
  NLS_DATE_LANGUAGE AMERICAN
  NLS_SORT BINARY
  NLS_TIME_FORMAT HH.MI. SSXFF AM
  NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
  NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
  NLS_DUAL_CURRENCY $
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS TANK
  NLS_NCHAR_CONV_EXCP FAKE
  NLS_NCHAR_CHARACTERSET AL16UTF16
  NLS_RDBMS_VERSION 9.2.0.4.0
  
  20 selected lines.
  
  Ora-12705 error is only being received from the peopletools 8.50.00 and above (8.50.00, 8.51.00, 8.52.00) revisions. This error is also received through the application server, even if the original demonstration database has not yet been built. This ora-12705 error is not generated in the previous revisions of peopletools (8.48.00, 8.48.10, 8.49.00). What possible environmental settings can be established and used to address this issue (ex: $NLS_LANG, $LANG)?

  Please, Nicolas.

  The construction of database of demonstration on oracle 10g solved the error ora-12705.

• (createvw.dms) stuck for a long time while running data mover

  Hi all
  
  First of all, thank you to all our friends in what have been great in answering all of our questions and help us do our work effectively.
  
  My question:
  
  1. we had installed Peoplesoft HRMS successfully for purposes of demonstration, which works very well.
  2. we followed the same sequence of steps to install Peoplesoft FSCM 9.1 to another Windows 2003 server. We had followed the steps as stated in
  [http://milburytech.blogspot.in/]
  3. we have been checking the logs at regular intervals for errors and comparing with the log files, the HRMS Setup logs, but did not find significant errors.
  4 data mover has worked for more than 16 hours now and has been blocked to "view (s) remaining: 119 creation held AUC_SCR_CHT_VW.
  
  My query:
  
  1 can we kill the data mover and run it once more to continue on the display component to create?
  2. in case if she-error, can we continue without the view 119 remaining being created?
  3. it causes problems (in particular, access associated (as one of my other nationalities, said that they had faced the same question last month and they spontaneous able to connect to the application (as SYSADM) Designer after that they tried to ignore the creation of panoramas).)
  
  
  
  
  
  Kind regards
  Vikram

  Hello

  A stucks Data Mover on the aspect of creating strange view, but it could easily be killed without any problem. Just re - open DMS mode bootstrap and the missing steps:

  REPLACE_VIEW *;
  CREATE_TEMP_TABLE *;
  

  Nicolas.

  PS: SYSADM is a database user and has no right to connect to AppDesigner.

  Published by: Gasparotto N 2 February 2012 09:50

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• HRCS 9.0 database installation script does not have the Data Mover Bootstrap

  People,
  
  Hello. I'm working on Campus Solution 9.0 and human resources.
  
  Atfter install HRCS 9.0 in PeopleTools 8.49, I create a script and run the script to load data into a database using the Data Mover Bootstrap HRCS.
  
  Data Mover Bootstrap mode, when the script imports about 1,000 records in the database, the Data Mover becomes unresponsive. How do the Data Mover to continue to run the script?

  As I said previously, you should check the log generated by the MDS file and as explained Jean-Marc, despite his suspended looks, the script can continue behind.
  A database of loading may take some time, depending on the configuration of the server/network.
  If you have an error in the unique key, this means that the tables has already loaded, so you can drop it and restart the DMS of this table or restart from scratch.

  Nicolas.

• View failed when importing data mover

  HII,
  IAM HRMS and CS9.0 review-1 installation. When the loading of the peoplesoft using import database in the data mover. I had 1 error in the view. It's as follows:
  Create view SAD_SL_PHONE_VW
  -SQL error. Position of the error: 239 return: 905 - ORA-00905: lack of keyword
  CREATE VIEW PS_SAD_SL_PHONE_VW (EMPLID, PHONE_TYPE, COUNTRY_CODE, PHONE, EXTENSION, PREF_PHONE_FLAG) AS SELECT A.EMPLID, B.PHONE_TYPE, B.COUNTRY_CODE, B.PHONE, B.EXTENSION, B.PREF_PHONE_FLAG OF (PS_PERSON A LEFT OUTER JOIN PS_PHONE_VW B WHERE A.EMPLID = B.EMPLID)
  Error: Unable to process create for SAD_SL_PHONE_VW statement
  Views rest: 2212
  
  So, how can I continue with it... pls help me.

  Probably bug in forum, wire double
  View failed when importing data mover

  Nicolas.