Data shared between applications

Similar Questions

• Store of data sharing between 4 ESX and ESXi 5

  Hello

  I have a vSphere environment 4.1 with a vCenter and a cluster of 3 ESX 4.1 access to the content of data through fiberchanel (type scneario) warehouses.

  And now I need to install a new ESXi 5.x (cannot be a different version) in a separate environment, outside of the current vCenter, BUT to access the warehouses of data even as the cluster of vSphere 4 current.

  Anyone know if there should be no problem sharing between 4 ESX and ESXi 5 access to the same data storage?

  Thanks in advance

  As long as the FC zoning is configured properly, avoid all the problems.   ESXi 5 will be able to see the data created by ESX4 VMFS3 stores, it will not be able to create the same size of virtual machine he can on a 5 VMFS datastore.

• store of data sharing between ESX and ESXi?

  Hello everyone

  This is something I have not yet tried, but is it possible to share the same store of data between ESX and ESXi (version 4)?

  /MH

  Without a doubt.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Sharing data between Applications

  I need to be able to share documents between different applications such as straight JAVA applications and MIDlets.  I went and wrote the code using the store only to find out that it does not work between applications. I saw something on the RuntimeStore but finds that it is not persistent (you lose the data on reboot). I think it is a severe limitation.  Are there other options?

  Thank you!

  You can use the persistent objects to back up and share data with other applications also.

  Give a look to this developer doc. Section "persistent data storage.

  http://NA.BlackBerry.com/eng/deliverables/608/BlackBerry_Application_Developer_Guide_Volume_2.PDF

• Account shared between cubes does not receive data

  Hello
  
  I created an application Multicurrency, consisting of 2 cubes. The first cube has only the default dimensions, the second cube additional custom two-dimensional. Custom2 stores members 'Amount' and 'Description', CUSTOM1 stores data for transactions (T1, T2, etc.).
  Cube 2 there is a form that uses an account shared between cubes ("Transactions") with cube 2 as plan source type. Thus, in cube 2 data is stored for a combination of account "Opérations", "T1" (Custom1) and 'Amount' (Custom2).
  Cube 1 there is a form that shows the account 'Operations' (read only due to the plan of different source type), however after I entered some data for the form assigned to cube2, train in cube1 is giving me all the data.
  
  
  I checked the essbase outline and cube 1 account 'Opérations' has the value dynamic Calc and formula automatically genereated during refresh XREF. For cube 2, this account is set to store.
  
  It seems that I'm missing something, however, I am not in a position to define what is originally the function XREF does not give results.
  The gurus of the Hyperion, you help me?
  
  Concerning
  Marcin Stawny

  Silly question

  If you do not have these dimensions in the Cube 1. This means that they take the total of these dimensions when he jumps from 1 Cube for Cube 2

  But you you aggregate Cube 2 entirely on these 2 dimensions.

  If you do not have a value at the top of these 2 dimensions, then you will see nothing in 1 Cube sure

• Pass data between applications value reference

  The issue is that data application reference value is local to the application instance, or can be transferred between different applications.

  I have a main application that acquires the table of 100 MB and I need to use these data in a dll. Obviously, I don't want to send table, reference would be better. Both applications are generated in labview 2011.

  The second question is whether reference data value can be converted to a string (type cast or flatten to a string) and back. For example with DAQmx tasks flatten to a string does not work.

  Alexander_Sobolev wrote:

  It's value application data reference is local to the application instance.

  Yes.

  or may be transferred between applications.

  Laughing out loud

  The second question is whether reference data value can be converted to a string (type cast or flatten to a string) and back.

  Yes, but only means something in the app instance appeared to reference.

  You will want to perhaps give more details on what are your real needs, but keep in mind that play with memory directly in LV is not so simple, as he does all he can to hide these details you.

  If you pass a pointer to an array to a DLL, you can configure the DLL for this call. If you want to get an accurate picture of LV in memory address and passing around, this isn't something LV supports and you shouldn't do that because the memory should not be controlled by more than one master at any time in time.

  LV has functions of memory allocation and to get the pointer back, but requiring explicit calls.

  Anyway, I have no real experience with this. If you want to read materials, there are at least two users here with much more knowledge on the subject and you can go through their messages or search and filter for their post - rolfk and nathand.

• Enter the data shared via BBM inside an application

  Hello

  I need to capture data shared via BBM inside my app BB10. I need to recover the data shared via BBM and then integrate it into my application.

  Is this possible. There is an onShareContent in the BBM-BB7.  We have this method in BB10 on the receiver side.

  This will then run on the receiver side. This must be set before the call to register()
  BlackBerry.BBM.Platform.Users.onsharecontent = function (sender As Object, content, description, timestamp) {}
  try {}

  } catch (e) {}
  TODO: handle exception
  Alert ("sharecontent.init Exception" + e);
  }
  }

  Kind regards

  Annuk

  BlackBerry 10 it is not possible to intercept data shared to BlackBerry Messenger.  But, your application can be a target from any application that supports sharing.  See the link below for more information.

  Receive call

• Identify the best way to transfer data between applications in Essbase

  Hello Experts,
  
  
  One of my clients uses Hyperion System 9.3.1 and they try to understand if the partitioning might be a way to automate the transfer of data between applications Essbase (using the partitioning of replication).
  
  The challenge, they say, is that they may need to send the budget a source application (SLVQ) data to an application (consolidated) target. Data can be changed in Conso and returned to the SLVQ for review.
  
  They get warnings when they define partitions in both directions because the partitions are overlapping, but it works.
  
  Are there concepts or reasons why they should not use this function (transfer in both directions)? Is this something that is used by other companies?
  
  Their alternative is to export data in text file, then reload with rule files. It seems more difficult to define (MaxL scripts-> text files-> rules of files) with more chances of getting errors. Is there some other effective solutions which we do not understand?
  
  Please suggest.
  
  Thanks in advance
  
  Kind regards
  Jingle

  Hi Lisa,
  other than the scores, text file
  There are two more, according to my knowledge

  1 XREF
  2 HAL (Hyperion Application Link) using adapters essbase

  We use the XREF and HAL to our company to transfer data between applications according to the needs.
  I hope this helps.

  Dornakal.
  www.dornakal.blogspot.com

• tape drive sharing between ndmphost and admin server usnig osb.

  Hello.
  It is available to share the tape drive between san usnig adminserver and ndmphost the switch?
  We have 6 lto5 disks and will be attached to the machine oracle ss7420 NDMP.
  The customer site has no backup of the customer unless the nas data.
  
  Reason why I'm asking as OSB catalogdb to tape drive backup.
  Is it safe to admin osb catalogdb backup as client or tape drive sharing is available?
  
  Another issue is that when we set up unit NDMP, NDMP host can control robot or robot control should assign to the server administrator or the two availble?
  
  Thank you.

  Yes it's available by design. You have to configure the NAS with the role of mediaserver and add a 2nd point of attachment to the device. You can then create calendars that limit to those fixing points. Allows you to share all the drives between all media servers.

  For the robot, I let the server admin to do that, just tape devices were mapped to the time. Controlling Robotics is a light enough task.

  Here is an example of one of my setups where the drive is shared between several media servers, Oracle Linux 4, Linux 5 Oracle and NetApp

  L700-1-lect1:
  Device type: Ribbon
  Model: ULTRIUM-TD2
  Serial number: 7MHHY00202
  In service: Yes
  Library: L700-1
  DTE: 2
  Automount: Yes
  Error rate: 8
  Frequency of application: [unknown]
  Debug mode: no
  Blocking factor: 512
  Blocking max factor: 512
  The current band: 999
  Use the list: all the
  In-car use: 7 months, 3 weeks
  Cleaning required: no
  UUID: 558a34da-045e-102c-8443-002264f35328
  Annex 1:
  Host: dadbdn01
  Raw device: / dev/tape/by-id/scsi-1IBM_ULTRIUM-TD2_7MHHY00202
  Appendix 2:
  Host: dadbdh01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__
  Annex 3:
  Host: dadbeh01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__
  Appendix 4:
  Host: ap1030nap
  Raw device: nrst1a
  Annex 5:
  Host: dadbak01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__

  Thank you

  Rich

• iMac (retina 5K, 27 inches, end of 2015) 1-2 second stops when you try to open or switch between applications

  1-2 second ago stops whenever I try to open an application or switching between applications. The animation of the application icon in the status bar at the opening of the starts, pauses for 1-2 seconds and ends before you open the application. When you click on an inactive application window it pauses for 1 to 2 seconds before making the active window. This only happens after a reboot. It takes about a day being initialized for this problem to occur.

  This does not seem like behaviour expected of such a new machine with charge card. All advice is appreciated.

  Here is my EtreCheck report:

  ***

  EtreCheck version: 2.9 (250)

  Report generated 2016-02-03 11:33:10

  Download EtreCheck from http://etrecheck.com

  Running time 01:31

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Computer is too slow

  Description:

  1-2 second ago stops whenever I try to open an application or switching between applications.

  Hardware Information: ⓘ

  iMac (retina 5K, 27 inches, end of 2015)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac17, 1

  1 4 GHz Intel Core i7 CPU: 4 strands

  32 GB of expandable RAM - [Instructions]

  BANK 0/DIMM0

  8 GB DDR3-1867 MHz ok

  0/DIMM1 BANK

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM0

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM1

  8 GB DDR3-1867 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: unknown

  Video information: ⓘ

  AMD Radeon R9 M395X - VRAM: 4096 MB

  iMac 5120 x 2880

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about one day

  Disc information: ⓘ

  SM1024G SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  iMac (disk1) /: 999,33 (Go 652,85 free)

  Storage of carrots: disk0s2 999.70 GB Online

  USB information: ⓘ

  Broadcom Corp. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Western Digital my passport 071D 1 TB

  EFI (disk2s1) : 210 MB

  Boot OS X (disk2s3) : 134 MB

  Backup local (DIS3) Volumes/iMac/iMac local backup: 999,51 (Go 107,33 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk2s2 999.83 Go online

  Apple Inc. IPhone.

  Reader SuperDrive for MacBook Air Apple Inc..

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  /Library/LaunchAgents/com.support.com.PerUser.Nexusd.plist

  /Library/LaunchAgents/com.support.com.PerUser.Nexussrvd.plist

  2 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. Belcarra.iokit.USBLAN_netpart (2.0.2) [Support]

  com [no charge]. Belcarra.iokit.USBLAN_usbpart (2.0.2) [Support]

  com [no charge]. RemoteControl.USBLAN.usbpart (2.0.6) [Support]

  /System/Library/Extensions/Belcarra.USBLAN_netpart.kext/contents/plugins

  [no charge] com.belcarra.IOKit.netpart.Panther (1.6.1) [Support]

  /System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/contents/plugins

  [no charge] com.belcarra.IOKit.usbpart.Panther (1.6.1) [Support]

  / System/Library/extensions/remotecontrol. USBLAN_usbpart.kext/contents/plugins

  com [no charge]. RemoteControl.USBLAN.panther (1.6.1) [Support]

  Launch system officers: ⓘ

  [loading] 148 tasks Apple

  [operation] 88 tasks Apple

  Launch system demons: ⓘ

  [loading] 191 tasks Apple

  [operation] 96 tasks Apple

  Launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.adobe.CS5ServiceManager.plist [Support]

  [loading] com.support.com.peruser.Nexusd.plist [Support]

  [failure] com.support.com.peruser.Nexussrvd.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist [Support]

  [loading] com.adobe.agsservice.plist [Support]

  [loading] com.adobe.fpsaud.plist [Support]

  [operation] com.backblaze.bzserv.plist [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [operation] com.sonos.SonosLibraryServer.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [failure] com.adobe.ARM. [...]. plist [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [operation] com.backblaze.bzbmenu.plist [Support]

  [failure] com.google.GoogleContactSyncAgent.plist [Support]

  [loading] com.google.keystone.agent.plist [Support]

  [operation] com.spotify.webhelper.plist [Support]

  [loading] com.valvesoftware.steamclean.plist [Support]

  [operation] net .infinite - labs.SIMBLEnablerForSandboxedApps.plist [Support]

  [operation] ws.agile.1PasswordAgent.plist [Support]

  Items in user login: ⓘ

  Workflow application (/ Applications/Flux.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Cinch Application (/ Applications/Cinch.app)

  Canon IJ Network Scanner Selector2 hidden Application (/ library/printers/Canon/IJScanner/utilities/Canon IJ Network scan Selector2.app)

  SizeUp Application (/ Applications/SizeUp.app)

  Dropbox application (/ Applications/Dropbox.app)

  The messages application (/ Applications/Messages.app)

  iTunes application (/ Applications/iTunes.app)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.EtreCheck

  [ongoing] com.getdropbox.dropbox.48992

  [ongoing] com.irradiatedsoftware.Cinch.151392

  [ongoing] com.irradiatedsoftware.SizeUp.12192

  [ongoing] jp.co.Canon.bj.scan.network.scannerselector2.90592

  jp.co.canon.bj.printer.app.MPNEX213.45792 [loading]

  [ongoing] JP.co.Canon.cijscannerregister.14112

  [ongoing] org.herf.Flux.49952

  Plug-ins Internet: ⓘ

  AdobeAAMDetect: Version: 1.0.0.0 - 10.6 [Support] SDK AdobeAAMDetect

  FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]

  QuickTime Plugin: Version: unknown

  Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]

  Default browser: Version: 601 - SDK 10.11

  SharePointBrowserPlugin: Version: 14.5.8 - SDK 10.6 [Support]

  Unity Web Player: Version: UnityPlayer version 5.2.0f3 - 10.6 SDK [Support]

  Silverlight: Version: 5.1.41105.0 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: update of Java 7 55 check version

  User Plug-ins internet: ⓘ

  WebEx64: Version: 1.0 - SDK 10.5 [Support]

  Web of Google Earth plugin: Version: 7.1 [Support]

  Safari extensions: ⓘ

  1Password

  Add to the list of Amazon gift

  InvisibleHand

  Little time

  PIN button

  3rd party preference panes: ⓘ

  Backblaze backup [Support]

  Flash Player [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  iMac: disc size: 999,33 GB disc used: 346,49 GB

  Destinations:

  The iMac HD Gallagher family backup local [Local]

  Total size: 999,51 GB

  Total number of backups: 82

  An older backup: 27/05/15, 12:54 AM

  Last backup: 03/02/16, 10:34

  Backup disk size: too small

  Backup size 999,51 GB< (disk="" used="" 346.49="" gb="" x="">

  Top of page process CPU: ⓘ

  140% nsurlsessiond (2)

  85% launchservicesd

  78% photolibraryd

  11% cloudphotosd

  9% com.apple.photomodel

  Top of page process of memory: ⓘ

  1.70 GB kernel_task

  1.12 GB launchservicesd

  1.12 GB cloudd

  Softwareupdated 492 MB

  Photolibraryd 229 MB

  Virtual memory information: ⓘ

  6.39 GB of free RAM

  26,00 used GB RAM (18,35 GB being cached)

  8 MB Swap used

  Diagnostic information: ⓘ

  3 February 2016, 11:31:58 /Library/Logs/DiagnosticReports/launchservicesd_2016-02-03-113158_[redacted].cp u_resource.diag [details]

  / System/Library/CoreServices/launchservicesd

  3 February 2016, 11:30:22 ~/Library/Logs/DiagnosticReports/iTunes_2016-02-03-113022_[redacted].crash

  com.apple.iTunes - /Applications/iTunes.app/Contents/MacOS/iTunes

  3 February 2016, 08:18:45 /Library/Logs/DiagnosticReports/nsurlsessiond_2016-02-03-081845_[redacted].cpu_ resource.diag [details]

  / usr/libexec/nsurlsessiond

  1 February 2016, 19:53:04 self-test - spent

  Hello Agent37,

  What are your settings of Photos? Looks like you have a ton of photos regenerate and transferring to iCloud. I've seen similar reports, but I'm not a heavy user of Photos. I'll see if I can move your question on the forum Photos: Photos for Mac

• global variables shared between several targets of RT

  Hello

  I'm looking for some information about variables shared between RT communication network.

  Scenario: a PXI 'master' and several 'slave' PXIs running that screw RT. data is available in the form of a cluster of definied type on each slave PXIs (inside a non deterministic while loop). I guess I create global variables of network shared for each PXI slaves. A variable for each slave. I only write data in these variables in one place (above mentioned, while loops), on the PXIs slave. I need to read that data in a way with loss (I just need that value the most recent, as tags) from the master PXI.

  Question: can I simply use "network shared variable" settings by default? I mean, I do not enable the option RT FIFO (single element), because I think that for a cluster that is a no go in the case of RT (variable length)?

  What do you think? Or would you have better idea how to share data between slaves and masters RT targets (I do not have deterministic/losless transmissions, only these last values)?

  I think that the way to proceed is to use the shared Variable Aliasing/binding - they allow you to 'link' shared variables in any of the multiple targets. https://forums.ni.com/t5/LabVIEW/Bind-Alias-shared-variable-to-scan-engine-variable/td-p/3290043.

  You can also use shared variables of programming access to access running on another target: http://zone.ni.com/reference/en-XX/help/371361G-01/lvconcepts/usingdynvarapi/

  With regard to the other methods - you could always disseminate data via UDP multicast (or with a TCP/IP connection manager).

• Can RuntimeStore store share some objects customed between applications?

  Hello

  I know that one application, we can use RuntimeStore to share information, including objects customed.

  What happens if sharing objects across applicatioins customed?

  Here is my scenario:

  1. two applications, app1 and app2.

  2. start app1. He puts some customed objects in RuntimeStore.

  3. run app2. It attempts to retrieve the objects of app1.

  I found this app2 cannot convert object type in type customed as defined in app1, but can convert to some standard objects BB, for example the screen.

  So is it possible to share objects between applications customed?

  You have a library that share the two applications?

  If you then set the store TIME object in the library. If you have not then you need create a library and create the class in the library for applications to use.

• LUNS shared between virtual machines? How?

  Hello..

  I shared LUN for ESXi host and now I want to have a shared LUN for my VMs too how can I do?

  Logic unit number that I want to do shared is already shared between my esx hos, can now do the same LUNS shared between my VMs? Is this possible?

  Tring to use RDMS, but when I assign shared my LUN shared for ESX host so not able to assign the same to another virtual computer that is located on another host ESX ESX LUN to my VM, its goingfrom

  Any idea?

  Thank you

  Once you have assigned to a virtual machine the RDM will be disppear. However as a virtual mode, there is a hard pointer created in the data store. then go on host2 make sure he has access to the LUN, and then add the pointer hard on the virtual computer via the existing disk option.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Share data warehouses between clustered hosts

  Hello, we had initially a cluster of ESX consisting of two guests who had shared access to different VMFS LUNS on an iSCSI SAN.

  Recently we bought an additional server, and additional storage and we have some problems to get the extra VMFS LUNs to be recognized by all hosts. The additional LUN is recognized by all hosts after a new analysis to Configuration-> storage adapters, but it seems that data warehouses can be added only for the storage of an individual host and not shared by the cluster?

  Adding the extra VMFS LUNS to a host works very well but they are not immediately recognized by the other guests and whenever you try to add data to them warehouses they insists on formatting the LUN and treating it essentially as a data store different.

  Since there is no problem sharing data between hosts warehouses in the original configuration, I wonder what setting it is necessary to enable sharing between all hosts in a cluster of data store? Thanks in advance!

  Probably, you have LUNS in different ways for each ESX Server (or the new ESX). If any information logical unit number (Lun ID, wwwn, etc.) is not the same for all ESX host tend to view this as a snapshot LUN.

  If you can't find what's going on, you can try a workaround (not too recommended but should work in your environment): go to the ESX configuration tab, click Advanced settings, and look for LVM. DisallowSnapshotLun option under LVM. Change it to 0, click OK and perform a new analysis. Repeat this for all of your guests.

  Please let us know if it works.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Chief Executive Officer of the Linux server

• You try to run LCM make of error during the selection of shared Service application

  Has recently created a new app planning want to import artifacts from LCM in the app. When I click on the newly created in the Shared Services/Application folder application, I get this message.
  
  'Unable to connect "[new planning app]" to ensure that the application is running and the user has the necessary permissions to access this function'
  
  
  If I use the same logon ID to enter in Hyperion Planning I can view/edit the new application of planning.
  
  Search in Oracle/Middleware/user_projects for log files, but nothing to really stood
  
  JTS

  It is a new application:
  1. data source control to ensure that the information provided is accurate and if it still fails to attack, then check the logs and share the error message.
  2 try to create a new application, at the time where you receive a message in the planning of this application created successfully, you should have the application created in the EA.

  See you soon... !!!