Database instance is discovered by manual, can add target in HP - UX

Similar Questions

• Can not find the file init for the database instance

  I have installed Oracle 10 g under Linux CentOS, run netca to create listener.ora and tnsnames.ora files, then I run dbca to create the myodb database and orcl instance.
  
  
  
  Now when I run dbstart, in the boot log, that it is said that he could not find the file orcl example init. so that the database myodb, he says:
  
  < em > / oracle/product/10.2.0/db_1/bin/dbstart: database instance "myodb' hot began.
  
  
  
  
  
  < /em > my questions:
  
  
  
  1. why it is said when I run dbstart both myodb & orcl are instances of database, I created myodb as the General database, while orcl corresponds to the instance, here it says:
  
  instance of < em > data treatment "orcl": journal file /oracle/product/10.2.0/db_1/startup.log
  
  Database instance "myodb' of treatment: save the /oracle/product/10.2.0/db_1/startup.log file
  
  
  
  < /em > is the name of the General database is considered an instance itself and can be used alternatively with the instance of word?
  
  
  
  2 when I created the database using dbca, I made the password for users of SYSTEM & SYS.
  
  
  
  When I try to connect to sqlplus using the system/mypassword, here it says:
  
  
  
  < strong > < em > ORA-01034: ORACLE is not available
  
  ORA-27101: shared memory realm does not exist
  
  Linux error: 2: no such file or directory < /em > < / strong >
  
  
  
  3. the database myodb started but it is not mentioned in my tnsnames file or the listener, while one mentioned is orcl has not begun, how is it? I know I'm missing a dir for /orcl in/oracle/home/admin, something that we find for the myodb, where there is/oracle/home/admin/myodb/pfile/init file.
  
  
  
  How can I fix this?
  
  
  
  4. What is the use of the command sql, < strong > edit < facilities > system registry, told me in another thread to connect to an idle instance with sqlplus and run this command, here what I got:
  
  
  
  < em > ERROR on line 1:
  
  ORA-01034: ORACLE not available
  
  
  
  < /em > 5 - can I just rely on the name of the General database and forget the thing of the Forum? I'm just confused about the difference and do not know how the orcl instance was created, it has not been created with dbca, because when I run dbca he says it's already there, create another instance, so I commented the sid parameter and now I amn't during its creation and how to retrieve its files if I need to re - create it again.
  
  
  
  Note: it is located in the bash_profile as $ORACLE_SID = orcl, why it's the only game, while General MYODB database name is not set, can be there rather than on the instance or SID in the bash_profile?
  
  
  
  
  
  Sorry for the many questions, this is the thing of the instance and their related discipline, I appreciate your help.
  
  
  
  Thanks in advance.
  
  
  
  
  

  If you have only 1 instance "orcl" then the oratab file should have only 1 entry - only for "orcl". Along, only one instance "myodb" {with the db_name "myodb"} must be started.
  The database Instance is identified by the SID - IE the ORACLE_SID.

  Normally, the SID and DB_NAME are the same - and they do like default value is the same when you run dbca. You have changed probably manually the db_name in dbca.

  If the listener is running on port 1521 and is started before the database instance, the database instance automatically saves with the listener. If the listener is started after the database instance, and then the command 'ALTER SYSTEM REGISTER' in the database instance indicates PMON to register with the listener.
  If you do not want to depend on the automatic check of the database with the listener instance, then you can include the information database (SID!) in the listener.ora. In addition, which would be caused if the listener is not on the default port 1521.

  See my posting in this thread: oracle sid and database the name of for more notes.

  A database can contain multiple schemas - each schema is a different database account. In other implementations of database (non-Oracle), what is called a "database", it is called a 'plan' in Oracle - but that is created as a database account. Database accounts are listed in DBA_USERS - if a user "owns" objects, it's a 'plan', otherwise, it is only a user. {Oracle also provides a CREATE SCHEMA command to create multiple objects in a single command.}

  Hemant K Collette
  http://hemantoracledba.blogspot.com

  Published by: Hemant K grapple on November 6, 2008 09:31
  corrected "orcl" to "myodb.

• Can a database instance cause several database schemas?

  Since coming from SQL Server I have red the concept of the Forum and got a little confused with the instance, schema, tablespace concept.

  If I get it up to now, Oracle has several layers.

  Database instances are as independent SQL servers started from the Oracle server.

  Each database instance can contain different data bases. OR a database is not owned by a histance, the mountain just a (confused about this)

  Each database can have different storage spaces.

  I created this pixture comparison, something like that?

  http://img191.imageshack.us/img191/7639/jv3z.jpg

  • a single instance can open a database only
  • on the other hand, a database can be opened by multiple instances on different servers in a clustered (RAC) environment
  • a database can have mutiple patterns (that's what SS called "database")
  • Each schema has objects that reside in one or more storage space (a single object is always 1 tablespace)
  • A tablespace is just a logical container
  • A tablespace is composed of one or more data files.

  -------------------------

  Sybrand Bakker
  Senior Oracle DBA

• JumpStartKit installation hangs at 87% complete when creating the database / instance configuration

  Hello people, I am wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already given a quick test in the VDI provided by Oracle).

  So, I've discovered this Jump Start Kit that installs every needed part once you have a properly configured Linux environment. I had fun with the prereqs but now that everything is finished and I am so EXCITED to make it past 'STAGE 4 '.

  So now, I encounter the same problem during installation - STEP 6 of 22 Configuration of the database Instance (creating database filling) it gets 87% complete and then nothing seems to happen, it never beyond this point, even if I wait 10 hours more:

  ***

  NOTE: I think that my problem is not specific to the "Jump Start Kit", but is rather something others have met during the stage of creation/configuration of the Oracle Universal Installer in general database. And I hope that others have solved.

  ***

  "/ opt/oracle/portal" is my INSTALL_DIR; I had started the installer of JSK with this command:

  . / runme INSTANCE_PASSWORD textile ROOT_PASSWORD = rpwd DOWNLOAD_DIR = = / media/sf_Downloads/JSKfiles INSTALL_DIR = / opt/oracle/portal

  -L' installer makes this well before it seems to get "stuck" - even after many hours there is no change, HD does nothing, CPU stays at < 5% use:

  rtkit.main.JSKStarter - launchScript:172 - kills Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of the database Instance. Estimated time is about 5 minutes. Please wait..

  15:41:38.545 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -.

  15:41:48.222 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - copy of database files

  15:41:48.413 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete

  All the 15:41:52.894 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3%

  All the 15:41:52.915 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11%

  All the 15:42:02.917 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18%

  All the 15:42:32.920 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26%

  15:42:42.638 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete

  15:42:42.640 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - creation and start-up of Oracle instance

  All the 15:42:48.568 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40%

  All the 15:42:56.827 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45%

  15:42:57.357 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete

  All the 15:42:57.526 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47 percent

  15:42:57.627 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% full

  All the 15:42:57.834 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49%

  15:44:42.915 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete

  All the 15:44:42.963 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59%

  All the 15:44:43.036 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60%

  All the 15:44:43.452 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61%

  15:44:43.452 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% full

  06/10/2014 15:44:43.453-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - creation of database of fill

  15:44:43.493 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete

  15:44:43.510 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete

  15:44:43.571 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete

  15:45:01.516 06/10/2014-(3) - JSK Starter wire - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete

  I use VirtualBox on Windows 7, I tried several times, first with the OS as Oracle Linux 6, then Oracle Linux 5 (learning to update the version of Java of fun!).

  It always happens at the same point, and then it just seems do nothing - no progress, but no error no message on the screen (see below the log files). But it seems to use less than 5%... the use of the processor and 10 hours of waiting makes no difference.

  After that I got tons of Google to search, I tried increasing my paging file, adding more memory and disk space (12 GB of RAM and 10 GB sap) and 20 GB of free space on the hard disk, but still nothing has changed.

  In post #2 of this thread, I'll give you separately the registration details that I hope will be useful.

  Thanks in advance!

  Darren.

  PS: Moderator, I tried to create this thread in other spaces, because I did not know this 'Portal JSK' specific one, which is why my son was rejected? NO REASON WAS GIVEN. If that IS the reason why, I must say that it will be almost impossible for anyone who is able to help me actually FIND this thread here because as I said I don't think specific for ONLY JSK portal. (But I'll post it here just in case this is the reason for previous releases)

  Hey Darren -.

  Installation with installation "office" is not the problem - no conflicting package it.

  I did add a short and FULL in/etc/hosts domain name and use the HTTP_SERVER_NAME option.  (But again, that shouldn't cause any problems during dbca.)

  I didn't install VBox extensions, since I'm just using a text installation (and created a corresponding configuration for VBox and vSphere), but I don't know that this is unrelated to all the.

  Regarding packages, if the database installs fine (which did you), your packages may very well.

  Here is my kickstart file - maybe you can try to use it, and then we can rule out configuration problems.  After the kickstart, everything I do is copy the installation files (in fact, I have them on a separate vmdk I just ride), and:

  (in oracle)

  CD/mnt/orainst/install & mkdir WCPortal_JSK_Linux.x 86-64 & WCPortal_JSK_Linux.x 86-64 cd & unzip /WCPortal_JSK_Linux.x86-64.zip...

  CD /mnt/orainst/install/WCPortal_JSK_Linux.x86-64 &. / runme DOWNLOAD_DIR = / mnt/orainst/installation INSTALL_DIR = / u01/app/oracle/product/webcenter HTTP_SERVER_NAME = wcportal.localdomain INSTANCE_PASSWORD = weblogic1 BIENVENUE1 = ROOT_PASSWORD

  If you want to make a desktop installation, delete the text, skipx and office packages (I added a few comments around that part), and it should work fine.  Don't worry about VBox extensions until you have a JSK running successfully.

  Fingers crossed it gets you more... Let me know.

  -Ed

  #platform = x 86, AMD64 or Intel EM64T

  #version = DEVEL

  # The firewall configuration

  Firewall - disabled

  # Install OS instead of upgrading

  install

  # Use installation CDROM support

  CDROM

  # Password Root

  rootpw - plaintext BIENVENUE1

  # Authorization system information

  AUTH - useshadow - passalgo = sha512

  # Use installation in text mode

  text

  # Keyboard system

  keyboard us

  # System language

  lang en

  # SELinux configuration

  SELinux - disabled

  # Do not configure the X Window System

  skipx

  # Disable firstboot

  Firstboot - disable

  # Level installation registration

  logging - level = info

  # System timezone

  time zone - isUtc America/New_York

  # Network information

  network - bootproto = dhcp - device = eth0 - onboot = on--hostname = wcportal

  # Boot loader configuration

  bootloader - location = mbr - driveorder = sda

  # Clear the Master Boot Record

  zerombr

  # Information partition offset

  clearpart - all - initlabel - discs = sda

  # Partition of a disk information

  part/boot - fstype = ext4 - size = 500

  part pv.01 - growth size = 1

  volgroup vg_wcportal - pesize = 4096 pv.01

  logvol / - fstype = ext4 - name = lv_root - vgname = vg_wcportal - size growth = 1

  # choose only one of the three following instructions

  # / tmp/swappart only works if uncomment lines in pre calc memory size

  #% include/tmp/swappart

  #logvol swap - name = lv_swap-= vg_wcportal - size = 12288 vgname

  swap logvol - name = lv_swap-= vg_wcportal - size = 9216 vgname

  % before

  #MEMT =' cat/proc/meminfo | grep ^ MemTotal | AWK ' {print $2 '}'

  #let SMEM = $MEMT/1024

  #echo 'swap logvol - name = lv_swap - vgname = vg_wcportal - size = $SMEM' >/tmp/swappart

  end %

  % post

  #rm f/tmp/swappart

  # Fix for nproc problem on OL6 (MOS score [1487773.1 ID])

  -i EI sed / ^ \ * \s * soft\s * nproc\s * $ 1024 / * \t-\tnproc\t16384 /' /etc/security/limits.d/90-nproc.conf

  # It's ugly, but seems to be necessary for ks on vsphere (not on vbox), so adding the controls

  Oracle ID > / dev/null 2 > & 1

  If [$?-eq 0]; then

  userdel oracle

  RM-f/var/spool/mail/oracle

  rm - rf/home/oracle

  FI

  groupmod oinstall > / dev/null 2 > & 1

  If [$?-eq 0]; then

  groupdel oinstall

  FI

  groupmod s/n > / dev/null 2 > & 1

  If [$?-eq 0]; then

  groupdel dba

  FI

  Groupadd-g 501 oinstall

  Groupadd-g 502 s/n

  g 503 groupadd Oper

  Groupadd g 504 asmadmin

  Groupadd g 506 asmdba

  Groupadd g 505 asmoper

  adduser, 502 - g oinstall s u g/n, asmdba, oper, oracle of wheel

  passwd oracle<>

  EU1

  EU1

  EXPRESSIONS OF FOLKLORE

  # kdump(1) not enabled when you install text without firstboot

  / sbin/chkconfig off kdump(1)

  Hostname = wcportal

  echo DHCP_HOSTNAME =------"$HOSTNAME\" > / etc/sysconfig/network-scripts/ifcfg-eth0

  IPADDR = "/ sbin/ifconfig eth0 |" grep inet\ addr. AWK '{print $2} ' | cut d: f 2'

  echo $HOSTNAME.localdomain $IPADDR $HOSTNAME > / etc/hosts

  # Disable graphical boot

  # but doesn't for some reason any!

  sed-i of / rhgb quiet / / g' /etc/grub.conf

  mkdir Pei/u01/app/oracle/product/webcenter

  chown-r oracle: oinstall/U01

  end %

  % packets

  @additional-devel

  @base

  @compat-libraries

  @console-internet

  @debugging

  @directory-customer

  @mail-server

  @fonts

  @graphical-admin-tools

  @hardware-monitoring

  @java-platform

  @large-systems

  @legacy-unix

  @legacy-x

  @nfs-file-server

  @network-file-system-client

  @network-tools

  @performance

  @perl-runtime

  @scientific

  @server-platform

  @system-admin-tools

  # - UNCOMMENT TO DESKTOP - START

  #@basic-desktop

  #@desktop-platform

  #@x11

  # - UNCOMMENT TO DESKTOP - END

  compat - libcap1.x86_64

  compat-libstdc ++-33.i686

  compat-libstdc ++-33.x86_64

  elfutils-libelf - devel.x86_64

  expect.x86_64

  GCC - c++ .x86_64

  glibc.i686

  glibc - devel.i686

  ksh.x86_64

  libaio.i686

  libaio - devel.i686

  libaio - devel.x86_64

  libgcc.i686

  libstdc ++ .i686

  libstdc ++-devel.x86_64

  NSS-softokn - freebl.i686

  numactl - devel.x86_64

  unixODBC.i686

  unixODBC.x86_64

  unixODBC - devel.i686

  unixODBC - devel.x86_64

  glibc.x86_64

  glibc - common.x86_64

  glibc - devel.x86_64

  glibc - headers.x86_64

  NSS-softokn - freebl.x86_64

  Oracle-RDBMS-server-11 GR 2-preinstall

  end %

• Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

  Hi all... I am a newbie with oracle database.,.

  I have the problem of monitoring:

  I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.

  I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.

  Installation-) before and during the hostname is localhost.

  (-) After the installation, I changed the host name in VMCentOS

  From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.

  When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:

  ORA-12514: TNS:listener is not currently of service requested in connect descriptor

  I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!

  Can someone tell me if, maybe, the problem is with the host has changed? ... and why?

  P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

  Hello

  It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

  When you install EA or there is no script that starts the database at startup.

  If you wish, you can create by yourself. For example search for instructions to Google how to create script.

  Kind regards

  Jari

• Browser Konqueror for Linux has a CPU limitation function useful for Web sites using Flash content. You can add such a feature in Firefox?

  I recently discovered that browser Konqueror for Linux can help the user to limit the CPU usage while visiting a Web site using flash technology by changing the settings in the Flash section and by adjusting the slider settings VERY HIGH to HIGH and AVERAGE and so on. It actually works and it doesn't have a direct impact on the overall performance for flash player, but it can lead to conflicts if other such extensions that add blocker or click-to-flash are also enabled.

  Maybe you can add a similar setting in Firefox in the browser or just as a useful addon or extension option section.

  Hi Michael,
  I love the sound of that. I found an add on which has Visual for the CPU usage as well as can be useful

  • https://addons.Mozilla.org/en-us/fire.../System-Monitor/

  Topic: memory page also contains a detailed report that breaks down each process that occupies this space. I wonder if it is a supplement that taps by limiting these
  Something like limiter window and tab

• HP envy 14 t-u000 cto: I can add SSD with my current HARD drive?

  Hello

  my laptop is HP ENVY 14 t-u000 cto, he already have WD Blue 750 GB, I can add a 128 GB ssd to work along side with the 750 GB hard drive?

  Hello

  Unfortunately no, there not M.2 SSD slot. No option to its Maintenance and Service of Guide:

  http://support.HP.com/us-en/product/HP-envy-14-notebook-PC-series/6936202/model/7261220/manuals

  Kind regards.

• You can add a specific artist for you?

  After clicking through the artists ever, I don't see many bands that I want to add.  It would be nice if there was an option to manually add specific bands.

  Short answer: not that I have ever found.

  Best suggestion:

  From now "For You" does not work as well as I do. I have some suggestions of genres that I completely removed on initial Setup, I have too many suggestions of artist for bands I don't like tracks I told them repeatedly and sometimes I will love an all the songs from the album of the band hoping to get suggestions, but it rarely works. To me "For You" is good about 75% of the time. I left a bug report in the comments (here's the link if you want to leave an as well http://www.apple.com/feedback/apple-music.html ) or in your case, you might want to make a feature suggestion.

  Things I do to work around it. Looking for a band. Results page will give "First results", "Albums", "Songs", "Playlists" you and a few other things. I click on the word playlists and see all the playlists associated with the group that I like. Many are several selections of the artist. You can add these playlists on your account by opening the playlist by clicking on the icon at the top right.

  You can also go to the artists page and find "Similar artists" on the side and do a search on them to find playlists.

• can not see Add targets and devices in the Project Explorer

  Hello!

  I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:

  the cRio:

  OR VISA 5.0

  NEITHER RIO 3.0
  RT LV 8.6

  and he allied himself with what I installed on my host.

  I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.

  Any help would be great!

  Thank you!

  Rajesh

  After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?

• Database instance lack of reports

  I am looking for a database instance named "db2p1dap", but it does not appear in the list of data. Is there a reason why it wouldn't appear?

  What database you monitor (db2 as its name suggests or something else?).

  Can you please send a screenshot of the dashboard DB showing how it appears.

  Where in the data tree you are looking for?

  Just one example of our laboratory.

  It's the DB2 instance in our laboratory

  

  And that's what it looks like in the data tree

  

  I hope this helps.

  Golan

• We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Hi all

  We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Let's say I have a cost with 5 code cost journal

  Code 1 price

  2 cost code

  Code 3 cost

  Code 4 cost

  Code 5 cost

  BP budget approval, after that I click on New, can I add a button to the tab the line items so that when I click on this button, it reads all codes of cost in the cost journal and auto fill on the grid?

  You can create a new 'model' BP for this purpose. Line item type. Then add a line manually with a cost on each code. Then you can use the copy in your BP BA record consolidate the function to copy the line items to the new folder of BP (including all cost codes) into your folder of BA. That is to set up a model record once with all cost codes and then copy consolidate billing it to all lines new record of BA. would this work?

• ORA-38760: this database instance could not turn on the flashback database

  Hi guys

  Without knowing it, I deleted all the files in the directory "fra" where "flashback" folder was there because of space issues. Now am facing the error.

  It's my practical database.

  SQL > startup

  ORACLE instance started.

  Total System Global Area 608174080 bytes

  Bytes of size 1268920 fixed

  184550216 variable size bytes

  419430400 of database buffers bytes

  Redo buffers 2924544 bytes

  Mounted database.

  ORA-38760: this database instance could not turn on the flashback database

  SQL > alter flashback database;

  Database altered.

  SQL > SHUTDOWN IMMEDIATE;

  SQL > STARTUP MOUNT

  SQL > select flashback_on from database v$.

  FLASHBACK_ON

  ------------------

  RESTORE POINT ONLY

  Am not able to extinguish the flame.

  SQL > select * from v$ restore_point;

  Select * from v$ restore_point

  *

  ERROR on line 1:

  ORA-38701: Flashback database log 1 seq 1 wire 1:

  "/ u01/fra/PROD/flashback/o1_mf_c1l5n3lq_.flb".

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  SQL > select flashback_on from database v$.

  FLASHBACK_ON

  ------------------

  RESTORE POINT ONLY

  I also tried to create a restore point and the flashback there.

  SQL > create restore point guaranteed rspt1 flashback database;

  Restore point created.

  SQL > select * from v$ restore_point;

  Select * from v$ restore_point

  *

  ERROR on line 1:

  ORA-00600: internal error code, arguments: [krfg_get_keepseq_2], [1], [0], [0,]

  [0], [0], [0], [0]

  SQL > flashback data base to restore the point rspt1;

  flashback database to restore the rspt1 point

  *

  ERROR on line 1:

  ORA-38729: not enough flashback database data log do FLASHBACK.

  Please help me in this regard.

  Alert log file:

  ...

  ...

  ...

  Mount of redo thread 1, with mount id 305866694

  Sun 25 Oct 10:13:30 2015

  Bytes allocated of 3981204 in the shared pool for the generation of flashback buffer

  From RVWR background process

  RVWR started with pid = 16, OS id = 15486

  Sun 25 Oct 10:13:30 2015

  Errors in the /u01/oracle/product/10.2.0/db_1/admin/prod/bdump/prod_rvwr_15486.trc file:

  ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  Sun 25 Oct 10:13:30 2015

  Database mounted in exclusive Mode

  Completed: ALTER DATABASE MOUNT

  Sun 25 Oct 10:13:30 2015

  ALTER DATABASE OPEN

  ORA-38760 marked during: ALTER DATABASE OPEN...

  Trace file:

  ...

  ...

  ...

  :() 2015-10-25 10:13:30.087 SERVICE NAME

  SESSION ID: (156.1) 2015-10-25 10:13:30.087

  ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  1. Thank you.

  you experience serious problem... because usually it works very well.

  Try the following:

  SQL > shutdown immediate;

  SQL > bootable media.

  SQL > alter flashback database;

  SQL > alter database backup controlfile to trace noresetlogs;

  SQL > shutdown immediate;

  go to the trace file generated from running (alter database backup controlfile to trace noresetlogs ;)

  location of the trace file is located in the query:

  SQL > select * from v$ diag_info;

  It will contain the script with the SQL commands, you can rename the file with the extension ".sql".

  SQL > startup nomount

  SQL > @trace_file. SQL

  SQL > restore database;

  SQL > alter database open;

  So basically you are going to recreate the files of control again...

• To connect two different database instance, what configuration in web cleint is necessary?

  
  Hi all

  We had two P6 database instance as a DEV and PROD

  We want to configure the web client so that the user can select either DEV or PROD according to the requirement by the same URL.

  Can you please tell me what I need to do in the web to work with two DB instance client?

  Normally, changes are reflected without bouncing the middle tier (weblogic Server). If t is not then rebound / restart the server managed by admin / when P6 application is deployed.

  Kind regards

  Sachin Gupta

• Discover the manual pool | Addition of office

  Hi team,

  Just a silly question. Can't we add more desktop manual pool in view 5.2?

  Please specify.

  Thank you!

  Kind regards

  Hari.

  No, you should be able to.  I don't think that you can add 2 to the same user, however.

• Is there a way I can add alternate text to links in Indesign cs6?

  Hello

  I need to put a lot of (> 1000) hyperlinks in my indesign document. Is there a way I can add alternate text to links in Indesign cs6?

  The idea is to then copy - paste the links by using the search function.

  So far I had to manually ad text in acrobat.

  My document is supposed to work like this: when a person reads the text and does not include an underlined word, they can click on it and it is brought to a dictionary into the document.

  The document must be accessible to people with disabilities.

  No automatic way. The problem is that each hyperlink typically has unique text. Therefore, there is no way to really automate it. You can see a sanitation such as by Netcentric Technologies Commonlook product. It is generally used for the protection of the files for accessibility, but it may include the ability to more easily add the alt text in hyperlinks. It would be well done in the exported PDF file and still not in InDesign.