DataGuard protection mode - difference between max and max performance available

Similar Questions

• U3014, the difference between CAL1 and CAL2 modes?

  In the preset mode color space for U3014 30 "monitor, what is the difference between CAL1 and CAL2? I tried both, but couldn't say a diff.  I know they are both precalibre mode that comes with the monitor.  Any info will be appreciated.

  course at 100%.

  Look, in these internal calibration of monitors's done it with a 3DLUT. The native range is greater than AdobeRGB (in red).
  Standard and modes Custom comes with native and native range WhitePoint (GBLED whitepoint, colder than D65 native), custom mode allows yo to set your desired white point.
  At the factory, 2 calibrations are stored in LUT3D and they are NOT editable by the users (but can be corrected by GPU):
  AdobeRGB: R, G & B coordinated (especially red coordinated), white point, and gamma of 2.2. 2nd is not very accurate.
  sRGB: R, G & B coordinated, white point gamma and sRGB. 2nd is not very accurate.

  AND as typical, monitor allows yo to store values of x LUT3D 2: CAL1 and CAL2 but it only works with the Dell Solution of Calibration color (DA), and DA only works them with i1DisplayPro.
  CAL1 and CAL2 are just "USER SLOTS" for the storage of LUT3D calibrations, nothing more.
  To the factory settings, they should behave in Standard mode.

• CDC: Difference between coherent and Simple mode?

  Hello
  
  I would like to know if anyone can explain the main differences between the two modes of the CDC?
  
  In fact, we are interested in implementing a DCC ODI asynchronous Oracle newspaper.
  But we would like to make sure that it matches our needs.
  
  I understand that the simple mode is on a table and the consistent on several articulated together.
  But my questions are:
  
  -Could we choose to log table for only some of the columns.
  -> If in my table, I'm not interested in the change of some columns, I can 'say' to the CDC do not watch?
  or the CDC can tell me which column had been updated?
  
  -in fact, I would like to know what is the difference between Simple and consistent? and if the mode is just a Simple mode for more than one table?
  Cause, we need to know what the source columns had been updated for each record, not only the primary key of the record being updated.
  
  I know that Oracle CDC allows it, but I don't know if ODI enable us to see only the columns that have been updated.
  
  
  Thanks in advance
  
  Brice

  Hi Brice,.

  AFAIK for a coherent CDC referential integrity must be set at the level DB (PK, FK).
  Personally I have never used any logical key, so I'd rather hear for a few experienced comments.

  Thank you
  Fati

• Difference between 'Reload' and "Reload (Override Cache)"?

  Https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-quickly#w_navigation, what is the difference between 'Reload' and "Reload (Override Cache)"? What makes "ignore cache"?

  Reloading Web pages and cache bypass aims to obtain a new copy of perhaps obsolete or damaged files currently stored in the disk cache.
  You can do it like the first attempt if a normal charging does not seem to provide a version of a Web site or if you are having problems with a Web site otherwise.

  We usually have advice that if you have questions:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.
  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if an extension or theme (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problems.

  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Qosmio X - 70A - difference between nVidia and driver Toshiba GPU

  Is there a difference between nvidia and one packed by toshiba display driver?
  I'm using the Toshiba but Geforce experience gives me a headache with warnings about a newer driver and toshiba does not appear to provide a.

  Of course there is a difference between the GPU nVidia drivers (or drivers provided by manufacturers of graphics cards) and the drivers provided by Toshiba.

  The Toshiba driver page GPU drivers are changed and made for the mobile use.
  Each laptop model supports various components (CPU, cooling, modules, etc.) and different design. That is why the heat dissipation is always different.

  The GPU driver provided by Toshiba supports a kind of GPU overheating protection and protects the graphics chip of the damage. This means that the GPU performance are controlled by the driver and in case the internal temperature would rise to critical level, it would decrease the performance of the GPU. Also the laptop stops automatically if the temperature is too high.

• gain of antenna 0, differences between radio0 and radio1

  On a stand-alone 1131, what is the effect of not having antenna gain set at 0?

  interface Dot11Radio0
  no ip address
  no ip route-cache
  !
  encryption mode ciphers tkip
  !
  encryption vlan 1 mode ciphers aes-ccm tkip
  !
  ssid Private
  !
  ssid Public
  !
  mbssid
  speed  basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
  station-role root
  

  What is the difference between radio0 and radio1 on a 1131, just 2.4 Ghz vs 5 GHz?

  Hello

  T1 >

  Radio0

  Private SSID

  SSID Public

  Radio1

  Private SSID

  Why not put the two on each radio?

  YEARS - here the SSID PUBLIC and PRIVATE and mapped to radio 0, this means, customers that supports the G radio be able to conenct to two SSID...

  where, the PRIVATE SSID is assgned to Radio 1, which means that customers who are capable of a radio will also be able to conenct... but who are not capable of A guests to conenct to the SSID PUBLIC since its not used at all for a radio...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• What is the difference between Bridge and Lightroom?  Should I have them both?

  What is the difference between Bridge and Lightroom?  Should I have them both?

  Hi MyYawrood,

  If you plan to expand your files only camera raw, then no, you don't need both. Camera Raw, which bridge lance when you select a raw in Bridge file has the same characteristics as Lightroom.

  That's where the similarity ends, however. Bridge is a file browser. You can organize and view the files on your hard drives connected. Bridge knows nothing about files that are not connected. Bridge can preview more Adobe files, regardless of the type of file and is a 'bridge' between applications. It will show also the icons for other types of files created in any application. Lightroom creates a database of a few image formats and knows about them, even if the disk they are on is in offline mode. It cannot handle most types of file formats, however. Lightroom has a robust for print production and publication Center. Bridge doesn't. Lightroom also has Mobile of Lightroom to make some fundamental changes to the photos on your phone or tablet. Bridge doesn't.

  So if you need both depends on what you do on your computer. I absolutely use Bridge / Camera Raw/Photoshop and Lightroom/Lightroom Mobile.

• is there a difference between 38 and 42mm with their pixel density?

  is there a difference between 38 and 42mm with their pixel density? the 38mm and 42mm watches have same interns?

  You can see the technical details of the Apple Watch here. Apple - Support - technical specifications

• What is the difference between extensions and Plugins and Add-ons?

  I'm sorry if here is not the right place for this post.

  What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.

  Kind regards
  Danesh

  Hi Danesh,

  You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.

  Hope this helps!

• What is the difference between Firefox and Namoroka 64-bit? I have a 64-bit computer. Which should I use?

  What is the difference between Firefox and Namoroka 64-bit?
  I have a 64-bit computer. Which should I use?

  The officially supported only is Firefox - which is your best choice, unless you want to test the new features...

  http://www.Mozilla.org/en-us/Firefox/new/

• What is the difference between dawn and the beta?

  What is the difference between dawn and the beta?

  Beta is the next version of Firefox that is due to be released in 5 weeks, and Aurora is the one after that--like an Alpha version of development.

• Difference between valuation and putting in good shape?

  What is the difference between recovery and formatting?

  I need to download tools and utilities to perform the recovery?

  Recovery recovery image installation.
  Formatting of removal of content from disk HARD integer.

  No, you don't need any download. All you need is CD/DVD recovery for your laptop model.

  To be honest, your questions are a bit funny. If you want to have accurate on such things information please publish your laptop model and it will be much easier to give you exact explanation and instructions how to use recovery CD/DVDs.

• Difference between Satellite and Satellite Pro L100

  What is the difference between satellite and satellite pro? for example - satellite L100 175 and satellite pro L100 176?

  Hello

  the difference between Satellite and Satellite Pro is the operating system:
  Windows XP Home Edition for Satellite
  Windows XP Professional for Satellite Pro

  The difference between the models L100-xxx is just the equipment.
  For example the CPU:
  Sam L100-175: Core Duo T2500; 2.0 GHz
  Satellite Pro L100 176: Core Duo T2400. 1.83 GHz
  For more details look into the specifications of the models.

  Good bye

• Is the difference between TSMC and Samsung Chip in the real Iphone 6 s? If this is the case, how can I found it before buying a new? How can I

  Is the difference between TSMC and samsung chip processors in the real Iphone 6 s? If this is the case, how can I found it before buying a new one?

  No, it isn't.

• difference between mathscript and matlabscript

  Hi iam new to labview and learning n do labview project

  What is the difference between mathscript and matlabscript

  I want to do the simulation using matlab

  How can I do

  If one suggests this

  Please answer and provide assistance so that I will perform my project...

  With the LabVIEW MathScript node, the blue rectangular region, you
  can run scripts from files ".m" of your graph (known as LabVIEW programs
  virtual instruments or screw). You can use the MathScript node

  to insert text algorithms in a VI and then use the LabVIEW
  environment of graphical programming to instrument the scripts by adding
  buttons, sliders, buttons, graphics, and other user controls and
  indicators.