Datos ciclica en ESXTOP Grabación

Similar Questions

• What is this error message on a web page: "No. is pudo insertar IP 2605:e000:3 fc 0: 37:6563:1afb:8 d 61:9783 en datos base."

  When you click on a link to a web site in Spanish, I get an error message: "No. is pudo insertar IP 2605:e000:3 fc 0: 37:6563:1afb:8 d 61:9783 en datos base.»

  Is this a problem with the web site or on my computer?

  Thank you
  Lymsi

  The message says that it is impossible to insert your IP address in the database. It's probably a problem with your network. While I do not know what causes this, here's something to try:

  1. connect your PC directly to your modem via an ethernet cable. (yellow cable goes to the router) If you don't use Wi - Fi, skip this step.

  2. If you cannot access the website via the modem, call your ISP.

  3. If you can access the site via the modem, reset your router by pressing the reset for a few seconds button. (ATTENTION! This will reset your wifi name and password!)

  4. If you can not access the site, try to buy a new router. The NETGEAR N150 router is easy to set up and very affordable.

  Hey, I know it sounds crazy, but trust me; This solves a problem with my wifi does not not a specific Web site.

• Closing datos por en scada modbus

  Muy buen dia a todos.

  Estoy modificando UN SCADA in the empresa in donde trabajo pero el problema as hay are consta esta para trabajar con FIELDPOINTS, yo eliminate los fieldpoints u OPC powered through y con PLC of MODBUS TCPIP similarly o serial ABB. Comunicación is the prevalence, puedo leer y señales analogicas write y digitales pero el escollo librar trato're como VI individual intensification has the perfeccion, pero ago al of integrarlo hora of SCADA no works, me errores marca el as como modulo escritura y lectura modbus esta receiving characters no aceptados o things asi extranas, estos momentos estoy tratando crear a Subvi don't express pero no is como hacerlo , is that the of primero doy a tools y ahi in crear una nueva express vi, of doy NEW despues en CREATE from a VI selecciono mi VI y me appears lo siguiente:

  SE me hace porque mi vi tiene tickets extraño y salidas, in this case tickets las salidas St o o reels pero no be that pasa.

  También estoy intentando hacer algo con las share if is you can hacer algo pero tampoco, en so mi problema're than mi SCADA y MODBUS corran al mismo tiempo, tambien initiates include todo el vi in SCADA el plano y cuando llega el programa ahi flow to para todo, ahi is is, variables, supuse than era una structure while , is the altogether there are quick-witted pero solo is me da UN valor.

  Ojala me can help alguien esto is to give has a client unos dias UN y todo esta por eso paradox.

  Mucho thank knew tiempo, reciban a cordial saludo.

  ING. A. Abraham. Alfonseca Melendez

  Normal
  0

  fake
  fake
  fake

  EN-US
  X NONE
  X NONE

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  MSO-style-priority: 99;
  MSO-style - qformat:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO-para-margin-top: 0;
  MSO-para-margin-right: 0;
  MSO-para-margin-bottom: 10.0pt;
  MSO-para-margin-left: 0;
  line-height: 115%;
  MSO-pagination: widow-orphan;
  font-size: 11.0pt;
  font family: 'Calibri', 'sans-serif ';
  MSO-ascii-font-family: Calibri;
  MSO-ascii-theme-make: minor-latin;
  mso-fareast-font-family: "Times New Roman";
  mso-fareast-theme-make: minor-fareast.
  MSO-hansi-font-family: Calibri;
  MSO-hansi-theme-make: minor-latin ;}

  Hola Abraham, the advantage of
  comunicarte con directly los lugar por MODBUS FielPoints are that the communication
  haces el through pilot directly variables compartidas, ahora o
  con estos tambien you puedes Comunicar por MODBUS. Para con MODBUS communication
  Server i/o MODBUS to estas using el este esta LabVIEW RT o en LabVIEW DSC, o
  the MODBUS libreria utilizando estas. ?

  Ahora el error that you
  Genera el del VI Express are you porque VI not las tiene nada en contacts
  Terminal, an esto is refiere don't con as no tickets tiene y salidas. Ahora
  probably aqui no using screw Express, the utility of los need live
  Express General are building as despues con use en herramientas para
  Los programas mas than fr if a component in a specific en programa, y proven
  MAS well utility para el Worflow para el programa final.

  Ahora el problema aqui of
  No funcionen juntos can be much more than a problem of integration. Como so
  mencionas you colocas a Subvi, con a ciclo while inside of a VI, VI el
  main goes a detenido meet (o por lo menos el ciclo in el as metiste
  Este Subvi) terminen run one until. Quitar el ciclo Al solo everything is
  runs una vez cada vez lo controls has call desde el principal, so solo lo
  Mandas call una vez solo you will a dar UN dato.

  Ahora lo mas algo
  con el to use are simple as puedes hacer I/O Server in case of than cuentes
  El, there is what sets el I/O server variable ligar puedes compartidas has los
  looking for MODBUS, y como utilizarlos compartidas variables in you sistema
  SCADA.

  Estas ligas you pueden ser
  utility of:

  Connected LabVIEW has any red Industrial y PLC.
  Developer Zone - National Instruments

  How to turn an RT target in Modbus slave using i/o
  Servers - Developer Zone - National Instruments

  Connected LabVIEW has any red Industrial y PLC.
  Developer Zone - National Instruments

  Saludos

• USE GRÁFICO PARA DATOS DIFERENT

  I have a vi that he created con el that I can import DTO desde excel o desde Citadel segun is quiera

  los datos Citadel (Dato + TimeStamp) los veo UN UN graph XY, pero los datos Zingari solo excel are el arreglo sin datos y TimeStamp no lo spuedo en el XY graphic worm

  Necesito UN poder ver el el mismo gráfico graph XY data to excel graficados y los también, el problema Citadel are Québec Citadel los Necesito UN ver con su timestamp los y los of excel deseo solo el arreglo as Zingari worm...

  Además deseo saber if you need the pc wont excel tenga para poder eimportar datos a labview

  NOTE: excel in los extraigo an archivo los datos normal .xls

  Gracias

  BUENO YO LO QUERIA TR EN'RE WORM IN EL MISMO LOS DATOS CITADEL GRAFICO EXCEL O, Y NO BACK GRAPHIC SINO EL MISMO PARA COSAS BOTH USE... LO IS ME HA LIGHT ARE THAT USE LOS DOS GRAPHIC CRIANDO EL QUE NO ESTE EXTRAYENDO LOS DATOS DONDE SEGÚN REQUIRED...

  CON RESPECTO A IF YOU NEED EXCEL... PORQUE DESDE OTRO SOFTWARE I CAN GET LOS DATOS THAT ESTAN SENSANDO IN A DOCUMENT FROM EXCEL Y DESEABA VERLOS IN LABVIEW IMPORTANDOLOS DESDE UNA MÁQUINA PEROCOMO EXCEL IN THAT ESTABA TRABAJANDO NO TENIA DON'T EXCEL NO PODIA VER LOS DATOS IN LABVIEW...

• (table of filling with data series) want table con datos serial

  Hola todos

  Tengo el siguiente problema put los datos back sensores fijado por el deseo series in a table, cada envio una palabra clave recibo 10 siguiente manera, ahora 0224,1023 datos are separo el chain y los convierto en numericos. El problema radica in than recibo los datos y los coloco en el table pero cuando cuando recibo otros 10 mas put in el table continuando siguiente linea desde los datos, lo what I need are my mantenga el table con los datos anteriores y cuando otros 10 reciba to borre el table y nuevo in the linea comienze 0

  in the first image is ve como's van while el pero Necesito UN Québec table me quédé como in the segunda vez as reciba los nuevos datos cada imagen

  the thank su ayuda is not to do

  Hello everyone

  I have the following problem will place two data received by sensors series in a table, each sending a key word to receive 10 facts, 0224.1023 is now following, I separate the string and turn them into digital. the problem is that I recover data and place it in the table but when when I receive another 10 data but their place in pursuit of the next line, what I need is to keep my table with previous data and when you get the other 10, the table and repeat is disabled on line 0

  in the first picture looks like they fill the table, but I need to keep me and the second image whenever you receive new data

  

  Hola aleramir

  You cuento that no me sirvio por ese lado pero prevalence hacerlo the siguiente forma y works exelente

  despues voy activar el boton don't con el programa no manual, igual manera you thank you answer

  

• LECTURA del puerto series e impresion of datos

  Buenas tardes, estoy comments por el puerto using series VISA 5 sensores datos, pero todos los is mezclan al usar, no discriminar como los datos en visa are LabView sin tener esos confilctos con los datos.

  Example:

  Llega al series:

  10

  15

  89.3

  -15

  -98.23

  Y al querer imprimirlos is mezclan todos y appears esos values in orden Chicagorealestate, could someone help me? MUCHAS gracias.

  
  

• Hola buenos dias quiero una compra realize con tarjeta credito pero el banco me pide los datos cuenta bancaria donde llegara the like live following me puedes cooperate con ese dato gracias

  Hola buenos dias quiero una compra realize con tarjeta credito pero el banco me pide los datos cuenta bancaria donde llegara the like live following me puedes cooperate con ese dato gracias

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Do not I already buy imagenes con tarjeta are al fill todos los datos cuando llego al pais toma me por estadounidense.y in mi perfil tengo los datos well.

  Not me already buy imagenes con tarjeta ago that fill todos los datos cuando llego al has the pais casilla not me already poner España y ciudad.¿como I can change the config cuando mi ID esta correcto?.

  The country associated with your Adobe ID is in the United States.  Please use the following workaround to change the country:

  Change the country associated with your Adobe ID

  Thank you

  Bev

• METI los datos mi tarjeta, compre ilustrator CC pero no puedo instalar no as soon as not compatible operating system, the hago como para instalar

  METI los datos mi tarjeta, compre ilustrator CC pero no puedo instalar no as soon as not compatible operating system, the hago como para instalar

  Please refer to the system requirements | Illustrator for operating system support.

  You can install CC 2014.

  Please use the following steps.

  1. Download creative Cloud desktop application from the link Download Adobe Creative Cloud apps | CC free trial Adobe
  2. Sign in using your Adobe ID and password.
  3. Go to the applications Panel and install the CC 2014 of the required application.

  Hope this will help you.

  Kind regards

  Hervé Khare

• ESXTOP is empty after the capture?

  Hello people,

  I run the following command to esxtop to capture data.

  ESXTOP d 10 - a-b - n 1800 > /tmp/esxtopiometeromni01_05112015.csv

  
  

  I see that the growth of the file running (he looks one of winscp), but eventually I come back to it or when it is done shows 0 B and empty when I opened in excel.

  I was wondering if someone else sees it?

  
  

  Thank you

  
  

  romatlo
  

  The actual writing is only happen when the file is closed and after 1800 iteration data will write do not have enough space to write. That's why you are faced with the question.

  I would suggest that you run the same command and copy the file in file/vmfs/volume/datastore/your name. CSV

  It will work try

• Remote start esxtop mutiple hosts at the same time?

  Hello people,

  I'm trying to figure out how to take this esxtop command:

  ESXTOP d 10 - a-b - n 6 > /tmp/cs242_esxtop1.csv

  .. .and convert it for use with get-esxtop-Server esxhost1 and PowerCLI.

  This perhaps is that I could call get-esxtop mutiple times in a script on multiple servers at the same time.

  Check if anyone has suggestions or comments?

  Thank you

  romatlo

  No response.  Will close.

• ESXTOP shows 100% cpu but vm is inactive

  Hello

  I have a pc with quad core intel, installed with 5.5 ESXi.

  I created a vm and installed centos 6.5 in.

  When I check the performance using esxtop, I see that all the CPU cores are 100% (attached) When vm is powered. (high in vm shows all the cpu idle)

  When I turned off the virtual machine, the host cpu to 2 per cent.

  What can I do to reduce the cpu load?

  ARO

  Yoram

  You have the following setting in the virtual machine configuration file:

  monitor_control.halt_desched = false

  This indicates ESX does not to deschedule comments when it stops.  In other words, this parameter specifies that the client should use 100% of CPU.

  If you want the computer virtual to give the CPU when it is inactive, you must remove this option.

• ESXTOP rebuild fails with permission denied

  Ran VM-Support - p d 300 - I have 5 w (output directory) order by exstop to output performance data. Unpacked the tar with tar-tzf (name of file) file, change to the new directory where the file was unzipped to, ran the. / reconstruct.sh order and received a permission denied error. I performed this task several times in the past. The brain cells are depleted and I google out. Would be recognizing all opinions. Thanks in advance!

  Solved my problem. I deleted the original compressed file and run the command rebuild and he succeeded. Something about the presence of this original file esxtop did not.

• ESXTOP and Resxtop commands (need help for - n)

  Hi all

  I'm studying for my VCAP-DCA and I still can't understand what means the - n command and the way of working out the value. I know that it stands for "number of iterations. resxtop (or esxtop) collects and records statistics that many times and then exits. "according to the documentation, but I can't work, how to calculate the number. Any help would be greatly appreciated I'm really lost.

  Example : I want to use esxtop to collect data for 2 minutes at intervals of 3 seconds and the output file

  I ran esxtop b d 3 n? > > test.csv

  -b is the batch mode

  d - sets the time in seconds

  but I do not know what to put in a - n

  Another example: I want to use esxtop to collect data to the output file at 5-minute intervals for 12 hours

  I ran esxtop b d 300 n? > > test1.csv

  
  

  is there a formula for n (time x 60) or something like

  Thanks in advance for your comments

  -n is just the number of iterations. That's all. If you want 1 million iterations and a delay of 5 then there will be 5 million capture of the values of the r/esxtop but - n is literally just the number of iterations

• High % expect in esxtop, possible storage problem

  ID NAME NWLD % USED GID % PERFORMANCE SYS % WAITING % VMWAIT % % IDLE % OVRLP % % MLMTD % SWPWT CSTP RDY

  43149200 43149200 EMT-DDC01 (a1a1 9 134.90 134,98 0.12 683,46 2.21 42,00 203.59 1.27 0.20 0.00 0.00)

  28562198 28562198 vse-MSO-Edge (d 8 80,59 78,27 2,81 683,19 0.05 3,30 109.84 0.25 0.61 0.00 0.00)

  30226902 30226902 PRIMARYEQUITY2.    10 76,38 76,93 0.11 868,31 2.28 9.49 293,73 0.71 0.04 0.00 0.00

  37111851 37111851 MSO-VDI01-AY 11 72.24 71,24 0.99 932,38 0.69 47,28 262.72 1.01 0.98 0.00 0.00

  43119442 43119442 vse-MId-Suffolk 8 70.02 70,21 0.39 693,36 0.68 1.45 119,33 0.24 0.00 0.00 0.00

  46306958 46306958 vse-AdminOrgEdg 10 62,67 63.50 0.63 885.24 1.23 6,92 310.96 1.18 0.02 0.00 0.00

  13167560 13167560 vse-CTN-Edge (2 8 57.95 58,56 0.37 694,68 0.56 11.85 120,71 0.28 0.06 0.00 0.00)

  28556153 28556153 vse-Emtrol-Edge 8 53.69 53,58 0.52 697,28 0.00 12.82 124.99 0.33 0.12 0.00 0.00

  13167557 13167557 vse-TheWaterIni 7 52.79 53.28 0.06 608,01 0.00 8,21 34,69 0.50 0.00 0.00 0.00

  46365778 46365778 CS-VDI01-AL 10 52.56 52,02 0.47 887,31 0.86 15,47 313.85 0.75 0.00 0.00 0.00

  31295267 31295267 redeployment-edg 7 52,21 53,13 0.10 0.00 615,09 1.18 41.92 1.02 0.00 0.00 0.00

  13167793 13167793 vse-test02 (2 0C6 51,18 52,33 0.05 512,85 0.00 8.69 35.30 0.53 0.00 0.00 0.00)

  14157382 14157382 vse-vDedge (6 243-49.41 49,70 0.07 522,82 0.00 1.14 45,20 0.32 0.00 0.00 0.00)

  13169846 13169846 vse-Test02-OrgV 7 48.50 49,73 0.04 0.00 618,20 1.41 45.05 0.60 0.00 0.00 0.00

  13167800 13167800 vse-test-OrgVDC 6 48,41 48.50 0.06 0.00 523,50 1.87 45,72 0.15 0.00 0.00 0.00

  13167713 13167713 vse-SuffolkHear 6 47,51 47,78 0.07 519,32 0.00 6,80 41,63 0.35 0.00 0.00 0.00

  16341616 16341616 vse-CTN-data-Ed 6 47,24 47,50 0.08 0.00 519,98 5,38 43.31 0.36 0.00 0.00 0.00

  13169830 13169830 vse-SKA-Edge (e 6 46.71 47,37 0.09 0.00 524,88 1.51 47,22 0.13 0.00 0.00 0.00)

  48322642 48322642 MSO-VDI01-AH 11 45,93 45.50 0.41 995,94 2.07 9,23 325.52 0.45 0.00 0.00 0.00

  13169852 13169852 vse-savvy-Demo0 6 45.03 45,81 0.09 526,96 0.00 49,50 0.78 0.17 0.00 0.00 0.00

  47785608 47785608 MSO-VDI01-AG 11 44,64 43,70 0.64 994,56 0.95 13.49 324.58 0.64 0.00 0.00 0.00

  29723688 29723688 CS-VDI01-AT 10 39,51 38,79 0.56 894,32 0.35 23,37 320.36 0.64 0.00 0.00 0.00

  28920785 28920785 vShield Manager 7 39.09 38.64 0.71 629,73 0.23 1.14 151.56 0.32 0.02 0.00 0.00

  32969301 32969301 CS-VDI01-AG 10 37,56 36,72 0.60 886,66 0.21 32,95 313.04 0.59-0.02 0.00 0.00

  46171865 46171865 MSO-VDI01-AX 11 36.65 36.13 0.38 1009.90 1.61 5.83 339.18 0.38 0.00 0.00 0.00

  27448559 27448559 CS-VDI01-BN 10 35,13 34.23 0.76 888,26 0.43 33,13 314,86 0.03 0.58 0.00 0.00

  31734816 31734816 appv01 14 26.69 26,64 0.11 1304,05 0.00 6.00 732.55 0.27 0.00 0.00 0.00

  47767398 47767398 CS-VDI01-BB 10 22.17 21,56 0.73 931,66 7.17 1.60 351.90 0.24 0.00 0.00 0.00

  31303314 31303314 IVR - DEV (3d 6 7582 16.90 15.95 0.93 552,69 0.24 5.08 74.55 0.18 0.00 0.00 0.00)

  43048162 43048162 EQY-XA-01 12 12.02 11.97 0.07 1127,67 0.43 6.15 554.78 0.18 0.00 0.00 0.00

  28920787 28920787 MSO-WEB-01 (c8a 14 10.07 9.97 0.07 1313.78 1.27 15.29 739.15 0.17 0.00 0.00 0.00)

  46890674 46890674 test-02-AA 10 9.54 9,39 0.08 938,85 0.57 6.58 365.68 0.21 0.00 0.00 0.00

  48413512 48413512 esxtop.26094921 1 8,89 8.77 86.70 0.00 - 0.00 0.00 0.02 0.00 0.00 0.00

  17983263 17983263 CS - FAX (3a87dcf 7 6.95 6.47 0.53 659,53 0.00 3.39 86.16 0.08 0.00 0.00 0.00)

  Seems to be associated storage.  Any other opinions?

  Hey Ryan,

  The best metric to look at is the % VMWAIT because it removes the IDLE time out the metric and gives a measure more accurete

  http://www.yellow-bricks.com/2012/07/17/why-is-wait-so-high/

  It's hard to say, but it looks like your time VMWAIT is still high on some virtual machines as well.  What is some of your numbers higher on VMWAIT?

  I hope this has helped