Db recovery mode standby idle DG and lag for days.

Similar Questions

• My question is that I have a HP Slimline it will harm my computer just if I leave it on the mode "standby" 24/7 and

  I have a HP Slimline Pavilion model: s5120f, Prod: NP187AA, Windows Vista. My question is it will harm my office if I leave

  on mode "standby" 24/7 and the monitor configured to sleep approximately: 20 Minutes?

  It will not damage your computer to "sleep" 24/7 and wake up to the need.

• MY Sony VAIO VPCEB13FX recovery mode does not start and ask the way to recover mode

  Please help what is the path for VPCEB13FX for the recovery mode.

  Hi rchoksi6,

  The recovery partition cannot be open/covered and is visible in disk management. By default, the recovery media should not ask the way since its preset. It is possible that the recovery partition can be damaged or is (missing a file (s).

• Dual LUN T60p w/ATI Mobility FireGL V5250 gets BSOD code recovery mode standby/hib 0x7F(0xd,0x0,0x0,0x0)

  I recently added a monitor to my T60p.  The video is an ATI Mobility FireGL V5250 with 512 MB of video RAM.  With ATI and the original BIOS drivers, there is a refresh very noticeable flicker tear occurring on the external monitor.  I tried to update the video using the ATI drivers, but it was a no-go (he pointed out that no supported device has been found, and indeed the V5250 is not a standard ATI offering).  I downloaded and installed the video driver ATI at 2008-01-31 listed in the downloads and drivers for the Lenovo T60p, and the problem remains.  Then I downloaded and installed the latest version of the BIOS (v1.14 - 7IET33WW) and recovered the stability of the display.  Other components of the system have also been updated: Reader, display HotKey, Powermanager of fingerprints.

  The next and current obstacle became the system to resume from standby or Hibernate mode (which we used to do without any problem).  If I put the PC to sleep or into hibernation after the desktop on the external monitor display, it will BlueScreen during reboot while resting on the login screen (or when connecting if I don't wait for the system to 'solve').  If I do not extend to the desktop, it seems to take OK (I didn't of extensive testing).  When the system is restarted, the error report that is sent to Microsoft would get a response indicating an incomplete/invalid dump and no help on the error.

  I reapplied (not uninstall) drivers ATI, thinking that he can use new behavior of BIOS to correct itself.  Minidumps are apparently now complete (since the Microsoft error report accepts them at least), but there is no indication in the discharge report, and they continue to occur.  He's still 0x7F (0xd, 0 x 0, 0 x 0, x 0).

  I have 26 minidumps.  WinDbg can read them and reports of 0x1000007f (like 0xd, 0, 0, 0) in at offset 102550 ati2mtag.sys (probably hex) and the offending statement a bugcheck was:

  movzx eax, byte ptr fs: [h 51]

  Anyone can shed some light on this?  I have not uninstalled/reinstalled drivers ATI because I don't want to take the risk of completely paralysing the PC.

  The problem has been corrected (!), so I'll mark this as resolved issue.  I now inoperative Center control Catalyst (CCC), but I think it's a relatively minor issue that I can deal with later.

  There are several learning along the way to share with all those who are interested:

  -After this experience, I would consider v8.442 FireGL video driver as it is less stable than the Version 8.383.1.1.3 (for XP) mode dual monitor and does not recommend its use.  If you do not upgrade to it, be prepared to restore.

  -Old drivers can be found on www.opendrivers.com, but are also available via ftp from the IBM web site.  I found it quite by chance.  The v8.383.1.1.3 driver is ftp://ftp.software.ibm.com/pc/pccbbs/mobiles/79d165ww.exe.

  -If, like me, you may not use rollback and must install a driver more old an new, know that the old version of the CCC will not install.  You need to uninstall the newer version first.  Otherwise, you will remain with a version of CCC who (apparently) does not work.

  Thanks for your help, JanJL!

• Satellite Pro 4300 no recovery mode standby

  I have a Satellite Pro 4340 is no longer recovers from sleep mode. I used to be able to press the standby on my wireless keyboard and she would go to sleep mode, and then flick the power switch and it would "wake up" to always to sleep but when I flip the switch, the computer makes a complete reboot and then passes through a disc to check for corruption etc.. I'm on Windows 2000 Professional, but do not have the original installation disc or discs which is come with the laptop as I bought it from a previous employer when they improved portable and it came with all the discs.

  Anyone can shed some light on this? It's almost as if a key file or involved in the process of sleep and recovery of files have been deleted or corrupted. Also, I checked the settings of Toshiba power and they have not been accidentally changed. I would add that I run normally with the screen down using a screen remotely and use a wireless keyboard. Suggestions welcomed.

  Hello

  Sorry, but it's really not easy to explain why this happen. You have the same situation if you switch to standby using usual shutdown option or simply by using your wireless keyboard?

• Mode standby, applied = No and deleted = Yes

  Hi all
  
  I have a question on the table v$ archived_log in standby mode.
  
  Table v$ archived_log to sleep, I found some documents that were not implemented, but deleted. However, the same sequence entries # what display applied and removed. How an archived log has been removed before it is applied? What is?
  

  RECID      STAMP  SEQUENCE#    THREAD# CREATOR REGISTR APP DEL FIRST_TIME      NEXT_TIME       COMPLETION_TIME
  206261  809266472     267281          1 LGWR    RFS     NO  YES 130305 12:14:19 130305 12:14:23 130305 12:14:32
  206263  809266481     267281          1 ARCH    RFS     YES YES 130305 12:14:19 130305 12:14:23 130305 12:14:41
  206258  809266444     267279          1 LGWR    RFS     NO  YES 130305 12:13:54 130305 12:13:58 130305 12:14:04
  206259  809266452     267279          1 ARCH    RFS     YES YES 130305 12:13:54 130305 12:13:58 130305 12:14:12
  206254  809266421     267276          1 LGWR    RFS     NO  YES 130305 12:13:26 130305 12:13:30 130305 12:13:41
  206255  809266429     267276          1 ARCH    RFS     YES YES 130305 12:13:26 130305 12:13:30 130305 12:13:49
  206238  809266260     267261          1 LGWR    RFS     NO  YES 130305 12:10:49 130305 12:10:53 130305 12:11:00
  206239  809266274     267261          1 ARCH    RFS     YES YES 130305 12:10:49 130305 12:10:53 130305 12:11:14
  202822  807796491     263851          1 LGWR    RFS     NO  YES 130219 11:54:09 130219 11:54:29 130219 11:54:51
  202825  807796499     263851          1 ARCH    RFS     YES YES 130219 11:54:09 130219 11:54:29 130219 11:54:59
  202492  807790205     263517          1 LGWR    RFS     NO  YES 130219 10:09:53 130219 10:09:58 130219 10:10:05
  202493  807790215     263517          1 ARCH    RFS     YES YES 130219 10:09:53 130219 10:09:58 130219 10:10:15
  202466  807790084     263492          1 LGWR    RFS     NO  YES 130219 10:07:45 130219 10:07:50 130219 10:08:04
  202468  807790096     263492          1 ARCH    RFS     YES YES 130219 10:07:45 130219 10:07:50 130219 10:08:16

  Kind regards
  NWW

  Standby

  ID STATUS    DB_MODE         TYPE       RECOVERY_MODE           PROTECTION_MODE            SRLs     ACTIVE ARCHIVED_SEQ#
  ---------- --------- --------------- ---------- ----------------------- -------------------- ---------- ---------- -------------
  1 VALID     MOUNTED-STANDBY ARCH       MANAGED                 MAXIMUM PERFORMANCE           0          0             0
  2 VALID     MOUNTED-STANDBY LGWR       MANAGED                 MAXIMUM PERFORMANCE           0          0             0
  11 VALID     MOUNTED-STANDBY ARCH       MANAGED                 MAXIMUM PERFORMANCE           0          0        269208
  

  Concern only the standby, why more than one location?
  They are the cascading standby databases? (or) archiving configured on several sites. So in this case, it is supposed to have.
  If really not necessary then see and clean all destinations other than LOG_ARCHIVE_DEST_1.

• x 230-do is not recovery mode standby when the lid remains open.

  If I close the lid it falls asleep, and when I opened the lid it is repeated.

  If I do not close the lid and it goes to sleep I can't wake up, tried to push the power button / stop flashing keys, trackpad, which does not.

  Any ideas anyone?

  Welcome to the community.

  have you tried pressing the Fn key?

  Kind regards.

• Firefox is very slow and lag for most of the sites I visit, cannot figure out how to fix.

  It started about a month or two it y a. almost all Web sites that I visit Firefox lag or stalls pure and simple script error messages, giving me the advice (not responding) to the top of the page or do not respond.

  I tried all suggestions that I found in help, including "Firefox uses too many resources", "Firefox crashes or does not ', and 'Unresponsive script - how to fix. I deleted the history, cookies and cache, reset Firefox, reinstalled, all what I can. I disabled all my extensions and modules one by one to see that if they touched, I took care of everything, including Firefox is updated. Nothing has changed behavior.

  Here, any help would be appreciated.

  How about a whole new profile?

  SEE: use the Profile Manager to create and delete profiles Firefox

• Could not start the recovery mode

  Have a 10 years, MacBook Pro under Snow Leopard. I want to erase the hard drive, so I can pass the computer. Tried to go to the mode of recovery many times, but I get to my office. Have you tried pressing the button command + R with no luck. Then I tried just by pressing the option key. Same thing.

  Someone has an idea?

  Thank you

  Rivervu

  You need to start on the DVD included with the computer. There is no recovery mode in Snow Leopard, and your computer is too old to use Internet recovery.

• MacBook Pro does not start safe mode or recovery mode without start up

  I use my MacBook Pro almost daily for several months now, and all of a sudden I stopped and start it up to a kernel panic (so it seems) who never lets me start normally, safe mode is a nothing helps. Recovery mode does not start, and when I try to use an external drive usb in the selection of drive it will appear. I don't know what to do more and I'm stuck. I'm not able to get in all the menus, so all I have is these pictures of panic before it restarts. Post picture soon submit iPhone photo.

  

• New SSDS do not mount on MBP 2012 Recovery Mode

  I replace the HD on a 2012 model 9.2 MBP with an OWC 6 G SSD. I ran a backup Time Machine on the HD 500 G original and then swapped the drive. I can't get the new SSD to appear in Recovery Mode to format it and install OS X I have tried with the original disc connected in an external box, even with the Time Machine backup drive and I tried with no externally attached at all. (Continued on the upgrade command instructions on the site of OWC http://eshop.macsales.com/articles/how-to-transfer-your-data-from-your-old-drive - to-a-new-reader) Then, I removed the SSD of MBP and attached to my Mac Mini in an external enclosure. It mounted fine and I was able to format. So I ruled out a faulty SSD. Then I restarted the MBP with original HD installed and the SSD connected via external enclosure. Run utility disc and formatted the SSD drive. Close all again and replace the SSD in the MBP. Started in Recovery Mode to install OS X and the drive does not appear.

  Currently of ideas. I rechecked all the components and all should be fully compatible.

  Ideas?

  -Scott

  Started in Recovery Mode to install OS X and the drive does not appear.

  You mean the restoration of the Internet (Command + Option + R)? Recovery mode is command + R, and since you do not have an operating system on your new SSD HD Recovery wouldn't be here.

• Disabled IPad can be reset using the recovery mode

  Someone with a good it knowledge doctored iPad without permission and now it can be reset using the recovery mode. While that plugged into iTunes, software downloads, iPad, then displays the Apple symbol but then returns the message "iPad is disabled connect to iTunes".

  Hi stephen158,

  I understand that, in the process of restoration of an iPad in recovery mode, your iPad rebooted and returns to the screen "connect to iTunes". This can occur if the software download takes longer than 15 minutes, how the iPad will exit Recovery mode and the software will continue to download. In this case, you should be able to put the iPad in recovery mode and choose to restore the device when prompted.

  1. Connect your device to your computer and open iTunes. If you don't have a computer, borrow one from a friend or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo. Keep until you see the screen in recovery mode now.
     
  3. When you see the option restore or update, choose update. iTunes will try to reinstall iOS without erasing your data. Please wait while iTunes downloaded the software for your device.
     If the download takes more than 15 minutes the device out of recovery mode, you must repeat these steps and choose restore instead of update when you return to this step.
     
  4. After the update or restore is complete, configure your device. If you have backed up your device with iTunes or iCloud and you need to restore your device in step 3, you may be able to restore from your backup during installation.

  If you are unable to update or restore your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201263

  See you soon!

• production and DR DB are synchronized after managed recovery mode

  I do the recovery mode managed all disaster of the DB. My manager asked me to check if the production and DR DB are synchronized after the DR DB change. I don't know how to do it. Could you please help me with this?
  
  Thanks for the help.
  
  -Sam

  You can use the following queries:

  on the primary:
  
  select max(sequence#) current_seq from v$log;
  
  on the standby:
  
  select max(applied_seq#) last_seq from     v$archive_dest_status;
  

  Must be the same.

  concerning

• Why won't my Macbook Pro start in recovery mode even when I press Cmd and R

  Why don't my Macbook Pro starts in mode of recovery even when I restart and press Cmd and R or also I tried Cmd Alt and R

  Is the EXACT year/model of your MBP a mid-2009 as the current OSX?

  Depending on the circumstances, you may need to use the drives original installation to help you MBP rerun.

  Ciao.

• Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Please take a genius appointment at an Apple Store, or select another authorized service provider.