Defective GPS location

Similar Questions

• Problem of GPS location after updating to IOS 10

  Anyone have problems with GPS location problem after update from IOS10?

  I drove Baltimore DC Regan airport, I tried with apple and Google map yesterday map, location was far from the highway, he could not determine where we are, we were on the road, but he kept us showing that we were on a local road to the highway.  Could not find 90% of time on my road.  Finally, I have to use my phone to brother with IOS9, we were fortunate that it has not updated to the most recent IOS 10.

  I wonder if anyone has the same problem after the update.

  Hello yinchiu85,

  I understand that your iPhone seems to have a hard time determining its location precisely. Fortunately, there are a number of steps you can take to help improve the accuracy of the information.
  

  Improve the accuracy of GPS

  GPS accuracy depends on the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. To improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
  • Keep a clear vision in several directions. Walls, vehicle roofs, buildings of great height, mountains and other obstacles can block the line of sight to GPS satellites. In this case, your device uses Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  If your iPhone is still unable to pinpoint your position, the next step would be to restore location Services.
  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  On privacy and location in iOS Services 8 and later versions
  https://support.Apple.com/en-us/HT203033

• Highway with GPS Locator 2013

  Hello... Highway 2013 with GPS Locator accepts the format longitude and latitude to find addresses in continental Europe. Also will it store tagged and entered multiple, as does Google Earth in this format?

  It is my intention to travel throughout Europe in my camper and want to connect ALL gites recognized beforehand. When I'm a useless to refer to a book for this information area.

  The highway 2013 forums are here: http://social.microsoft.com/Forums/en-US/home?forum=streetsandtrips

• I have Windows XP. I am trying to download Microsoft Streets & Trips 2009 / with GPS Locator.

  I have Windows XP. I am trying to download Microsoft Streets & Trips 2009 / with GPS Locator. A notice appears stating (format not supported). Help, please.

  Hello

  Check with the streets and the support of the TRIPS Agreement.

  Streets & Trips
  http://www.Microsoft.com/streets/en-us/default.aspxp

  Streets & Trips - help and Support
  http://www.Microsoft.com/streets/en-us/support-and-training.aspx

  Streets and travel community
  http://www.Microsoft.com/streets/en-us/community-and-news.aspx

  Streets and travel Forum
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot find GPS location

  Hello

  In recent weeks, I have a very annoying problem with my Sony Z3 Compact. It shows the GPS location very wrong even when I'm out. I already tried most of the solutions that have been posted in this community, but nothing helped. Also when I use applications such as the State of the GPS and the Toolbox, the gps is not able to pinpoint my location. It shows that there are satellites, but it does not connect with them.

  Please does anyone have a solution? Because with the pokemonGo and other fitness tracking apps it becomes impractical.

  Hello

  I contacted just a local repair center (an independent) and I got the answer next back on the problem:

• Can I switch to Streets & Trips with GPS Locator 2010 free if I already have the version of 2005?

  Can I switch to Streets & Trips with GPS Locator 2010 free if I already have the version of 2005?

  Hi Little rebel,

  To upgrade Microsoft Streets & Trips with GPS Locator 2005, you just buy the new version of the software, streets & trips 2010. Hardware (GPS Locator) is continuing to function.

  Review: Streets & trips

  Community of users of streets & trips

  Tips & tricks for streets & trips

  Laptop GPS World

• To improve the streets & trips 2008 to 2010 and use GPS Locator

  Original title: I streets and trips 2008 + GPS Locator. Can I upgrade to 2010 and continue to use the GPS Locator even connected to the USB port?
  I streets and trips 2008 + GPS Locator. Can I upgrade to 2010 and continue to use the GPS Locator even connected to the USB port?

  It is the instance of Vista installation.

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.streets-trips

  Discussions in Streets and Trips

  Try the discussion above for your question.

  See you soon.

  Mick Murphy - Microsoft partner

• Current GPS location

  Hello

  To get the current GPS location, I tried with this code, but doesn't seem to work

   private void testGPSLocation(){
          Thread t = new Thread(new Runnable() {
  
              public void run() {
                  //GPS Location
                  try{
                      LocationProvider provider = LocationProvider.getInstance(null);
                      Location loc = provider.getLocation(180);
                      Coordinates self = loc.getQualifiedCoordinates();
                      if (self != null)
                      {
                          double longitude = self.getLongitude();
                          double latitude = self.getLatitude();
                          System.out.println("longitude "+ longitude);
                          System.out.println("latitude "+ latitude);
                      }
                  }catch(Exception ex){
                      ex.printStackTrace();
                      System.err.println(ex.toString());
                  }
              }
          });
  
          t.run();
     }
  

  I tried to run GPSDemo of the samples provided by BlackBerry... but still he always gives the Longitude/Latitude/Altitude values by '0 '. I am running on BlackBerry 9530/9630. Are there settings need to be changed?  There is a possibility to enter the name of the server and I put my PC (localhost)... but still the same address. Any help on this would be appreciated.

  Thank you

  -DESTREEZ

  Large.

  Please check the thread "resolved".

• GPS location works Simulator, but does not work in the device

  Hi all,

  I have problem with GPS location.

  I have the button through which I can get the latitude and longitude in Simulator via LocationProvider class.

  His work very well in the Simulator, but giving is not the result in the unit.

  I use Storm 9530 devices and curve 8830.

  Thank you

  Valter

  Thanks for your support,

  Finally, I found my location.

  The steps are:

  As a first step BBDeveloper mentioned

  Options of-> advanced-> GPS Options

  Now,.

  Start the application maps

  Select Menu-> start the GPS Navigation

  or

  Find the location-> where I am

  It will activate the GPS.

  Thank you and best regards,

  Valter

• Extract the GPS location in the device

  Hi all

  I want to get the GPS location as soon as possible. I use the blackberry 5.0 version. When I use the blackberry Simulator, I am able to read the current GPS position, but when I installed this application on my device, device is unable to get the GPS location. It is showing error and also I am not able to detect the error.

  Neeraj Chauhan

  Try this http://supportforums.blackberry.com/t5/Java-Development/How-to-get-Current-GPS-Location-from-the-Bla...

• Download other store apps that require a GPS location leads to error messages.

  Original title: Maps
  My position has stopped working over the weekend. Download other store apps that require a GPS location leads to error messages. What have I done?

  Hello

  -What are the error messages that you receive when you download apps? (This will help us find the cause of the problem)

  We will check your zone settings, if they are configured incorrectly to correct us and check if this solves the problem.

  a. on the start screen, enter the Date, press or click settingsand then press or click on define the date and.

  b. the Date and time tab, tap or click on change of time zone.

  c. check if the zone settings are right depending on your region. If you find not bad, change it accordingly and click on apply, Ok.

  Also to synchronize the time on the computer with Internet server by using the step below:

  a. on the Internet time tab, tap or click on change settings.

  b. check the box synchronize with a time server Internet and then tap or click Update now.

  Restart the computer and check that it works very well. If you experience additional problems, you can reply to this post.

• Not on GPS Locator

  My centro line red if GPS Locator icon it. IM assuming this means that is is not on. How he turned on? Help, please...

  SOONERSTEVE wrote:
  My centro line red if GPS Locator icon it. IM assuming this means that is is not on. How he turned on? Help, please...

  It's on page 93 of your manual (can be on CD):

  Go to the screen of the phone, press the Options Menu > phone Preferences, change the '911 only' to 'location '.

  It work?

  Message is about: Treo 800w (Sprint)

• Map screen: assign the same GPS location to a 'rare' image group

  Let's a have a buch of photos that were taken in the same place at different times. The images are scattered throughout the fimstrip and might even belong to different collections in the same catalog (or even different catalogs?). What is the best way to assign the same GPS coordinates to all these photos using the map screen?

  Of course, the direct way to do is to carefully select all of these photos in the Filmstrip, and then click the desired location on the map. It is problematic for reasons more than one. First of all, it is difficult to scroll the whole band and choose the photos one by one. Second, if I acccidentally miss one or two photos, I have to start all over again.

  The best way would be a sort of copy / paste appproach: copy the desired location in the Clipboard (another image or directly from the map) and then paste it on the desired images one by one or, better, on groups of images. A feature that, at first seems promising in this respect is the field of text input on the right that contains the GPS coordinates in the form of text. It is editable, which means that I can copy the coordinates (as text) of an image and paste it in the same field from another image. However, this unfortunately does not guarantee that images will end up with identical locations: the image that received the new coordinates could (and will be) end up with a slightly different location in terms of the image of the "donor". This means that the coordinates are stored internally with a precision greater than their representation in the text entry field.

  So, what are the other options?

  In the grid, select the "donor" photo, and then ctrl-click to select the photos of 'recipient '. Then synchronize the metadata, including the GPS location and any other fields that you want to synchronize. It's the equivalent of copy and multiple - Lightroom paste.

  This works only in a single catalog. It will not work in several catalogs (which of course is one of the many reasons why many people use a single catalog for all of their photos)

• Driver for GPS Locator for Windows XP

  Where can I find a driver for the Locator GPS Microsoft for Windows XP?

  Hello

  I suggest you to post your request in this forum for better support.
  http://www.Microsoft.com/streets/en-us/support-and-training.aspx

• Get the GPS location API error - provider is not available

  Hello

  I am trying to access the information of location using Android location API (via LocationManager.GPS_PROVIDER), but without success. I get error "provider not available."

  AndroidManifest.xml has lines related to the relevant permissions:

  
  

  But I do not get prompt the same security to grant these permissions to my request.

  OS version 2.0.0.3894

  Build 73070

  Thank you.

  I solved this problem by restarting and place the device near a window.

  What I was wondering now is why Android player never asked security permission to access the location of the GPS. What is a function of development?