definition of the background image of the file during execution

Similar Questions

• change the frequency of the signal during execution

  Hi, I'm working on a VI to calculate excess of signal I think VI seems to be good (not sure) but now my problem is

  change the frequency during execution, which I am not able to do only when I stop and run the vi frequency changes... pls

  someone help me I tried to put in an event... but no use... maybe iam missing something pls help me...

  I noticed that you have some time a loop around the entire block diagram - I'm not entirely sure why that is.  The way you have your VI wrote that the two inner loops will never come out unless there is an error-'stop' buttons are hidden.  Thus, the outer loop is not do anything for you.

  Once you take it, it is easy to see why you cannot change frequency.  It is defined once, outside of the loops and so never gets checked again.  The best way to resolve this, in your case, is to use registers with shift on the upper loop and check if the value of the frequency has changed since the last iteration.  If so, generate a new waveform and feed DAQmx writing instead.

  See the version annexed to your main VI for what I mean.  (I also replaced the controls to stop with one that is visible and which will stop the two loops without your duty to hit the button abandon.) I'm also an error on the DAQmx read in the loop at the bottom, but I'm sure it will work fine on your equipment.

  See you soon,.

  Michael

• Pass the value of the variable during execution

  Hello
  
  I have a package with a set of interfaces and three other variables.
  
  I want to pass the value of the variable at runtime, based on the value passed I want to decide which interface to run then. How can I do this? I got a set variable but I want to asssign the value during execution.
  
  Any help is greatly appreciated.
  
  
  Thank you
  San

  You have many options to achieve this goal.

  1. keep the run settings in the database, extract the Variables in a time of refreshment and use these variables in your Interfaces to get values of execution.

  2. change the value to the variables on the outside. You can declare a variable in a package as a step of the statement, and then use the variable in your interface in a successive step in your package. Then, create a scenario of your package and creating the scenario, it will prompt you to include the variables that you want to include as a startup parameter. Choose the one (s) concerned. Citing this scenario using Java or an OdiStartScen command or by using Webservices ODI externally, you can provide values of the runtime as a result.

  I hope this helps.

  Concerning
  A

  Published by: 922636 on August 29, 2012 23:53

• Authorization error 8 the file during the copy of the directory

  

  When I run the above vi for the first time, the copy of the source path directory to target the way successfully.

  When I tried to run the once again I get an error like "error Code 8, or the Possible reasons: LabVIEW: authorization error, OR-488 of the file: hardware error detected DMA.

  What was I doing wrong... or am I missing something?

  The mistake is due to file permission ... some of the files in the directory are some read-only permission. So when I run the vi for the first time successfully, it copies and when I tried to run one more time I was getting error code 8...

  When I change the definition of 511 file permissions... now I'm albe to copy the file successfully

• Changing properties of the file during import to Premiere Pro

  Hello

  Strange problem I encountered: images taken with my Canon 6 d fixed changes in 1920 x 1080 / 30 fps at 1080 x 720/25 fps when they are imported into Premiere Pro (CS6). My PP settings are: Digital SLR, 1080 p 30.  Can someone help me understand what is happening here I have triple checked the camera and PP. settings This problem is forcing me to produce videos SD that I shot in HD – a real frustration!  Thank you.

  Thanks for your reply, but I just found out that the mistake was made before importing files in Premiere Pro. Initially, I had these files stored in the Mac Photos and did not know that by dragging to the desktop would change the file properties. To keep the original properties, you must go to file > export > export original unmodified.

• How is it LR4 changes the color temperature of the files during import?

  Here's what happens:

  I work with a connected to a card reader Sandisk Sandisk 32 GB card.

  I'm working on a MacBookPro.

  I have the latest Lightroom 4.1

  I start the import of in LR.

  For example, FILE - IMPORT PICTURES AND VIDEOS

  And then I import on my external hard drive.

  The buggles my mind thing: at some point in the import, LR changes the color tempretaure of some of the files!

  Thus, the first 63 first imported images are at the right temperature and then everything else is false.

  I went and open files on the FINDER, and all CF files are at the temperature of accurate color on the card itself.

  So, what the hell is going on?

  If someone saw, I'd love to hear what you have to say.

  Yes, I think that you have changed the default settings - specifically for a certain ISO setting, which is one of the options - (perhaps inadvertently), so change your ISO has triggered the new default value of development. If this isn't what you want, you can restore the default Adobe development settings: use the same image to develop, select develop > set parameters by default from the menu bar, then click on "restore default settings Adobe". This should stop the problem does not happen.

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• 'A problem occurred during extraction of the files' during installation - Adobe CS6

  I downloaded both the DesignWebPremium_CS6_LS16 on my computer Windows 7 Pro and when I run the exe, it gives me the error "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. When I click OK another message comes up with ' a problem occurred during extraction of archive. ". Please try to download the Adobe CS6 Design and Web Premium again'. Any ideas?

  • The computer has 128 GB of space
  • I downloaded the software twice
  • I tried to extract to the desktop "C:\Users\Brad\Desktop\Adobe CS6 Design and Web Premium" with my login right click on it and run the exe as admin
  • I tried to extract to the desktop "C:\Adobe CS6 Design and Web Premium" with my login right click on it and run the exe as admin

  Hello

  Please see the following links:

  Troubleshoot installation with the log files. CS5, CS5.5, CS6

  Installation and launch log errors | CS5, CS5.5, CS6

  The know us if that helps.

  Kind regards

  Bani

• Size of the file during import?

  Hi all
  
  What is the maximum file size that you can import in FDM 11.1.1.3?
  
  in the network/Inbox?
  
  Published by: tyson33 on December 14, 2009 11:16

  Hello

  When you use the "Select Inbox" there is no limit. The limit is relational to the amount of RAM and other processes on the server.

  When you use the "Browse" button where you download the file first, IIS has a default limit of 25megs.

  Thank you

• How to manually activate the file Data Execution Prevention?

  When using the Microsoft Fix it Center it could not activate my data execution prevention. How to solve this?

  Hi dear Lowe,
   
  Here are some articles that you might find useful:
  A detailed description of the feature Data Execution Prevention (DEP) in Windows XP Service Pack 2, Microsoft Windows XP Tablet PC Edition 2005, and Windows Server 2003
  How to configure memory Protection in Windows XP SP2
   

• Is it safe compress the listener during execution of system logs?

  Hello
  
  I am new to CARS and work on 24 * 7 databases in a RAC CLuster.
  
  There is a very large listener_scan2.log in the /u01/11.2.0/grid/log/diag/tnslsnr/ < servername >/listener_scan2/trace file, the file is about 2.8 G.
  
  I did some research and saw that compress f was recommended via crontab, this has the advantage of being something that can be automated and run monthly
  
  for example
  
  # listener log aging
  17 0 * 0/usr/bin/compress f /u01/app/grid/diag/tnslsnr/node1/listener/trace/listener.log
  17 0 * 0/usr/bin/compress f /u01/app/11.2.0/grid/log/diag/tnslsnr/node1/listener_scan1/trace/*log
  17 0 * 0/usr/bin/compress f /u01/app/11.2.0/grid/log/diag/tnslsnr/node1/listener_scan2/trace/*log
  17 0 * 0/usr/bin/compress f /u01/app/11.2.0/grid/log/diag/tnslsnr/node1/listener_scan3/trace/*log
  
  
  Is it safe run these while the system and the listener are rising and running, the listener will create a new listener.log file if one is compressed, even if the listener is not restarted.
  
  Other articles suggest using lsnrctl and change the location of the listener newspapers and then rename/compress/remove the old log file, then set the location of the back log listener even once...
  Anyone used this in a Production System?
  
  I look forward to your comments.
  
  Thank you very much
  Rob

  http://danthedba.blogspot.in/2009/11/manage-listener-log-files-in-11g.html
  http://msutic.blogspot.in/2009/06/truncating-rotating-flushing.html
  https://kkempf.WordPress.com/2011/06/10/rotating-listener-logs-without-bouncing-the-listener/

• Alternative to the drawing during execution

  So first of all, let me explain my problem... it's complicated to explain--then please ask for clarification, if not sense.

  I need to have the ablity to create 3000 + sprites so they can be interacting. In this case, it's a bunch of booths at the show.  I did a lot of experimenting on how to draw create / this in the fastest way possible.  I used timers, loops, enter events framework and I am still not satisfied with the speed.  My new idea is to create a swf separated before hand which all sucked, so this should not be done at run time, just a swf file can be downloaded.  So my question is... What would be the best way to develop a module that attracts all that in a swf file so that at run time, I do not paint anything, I'm just downloading the file. I think to look into adobe air stuff, but any suggestions would be greatly appreciated.

  locations that you will not be put in the xml file.  and...

  I stopped for me: you might be able to get a quick solution to this by loading your xml and then store its data in an array or an object.  It will take a little more time up front, but it should be always less than 1 second.

  Then, in your loop where you instantiate your Booth1 objects, you can recover the data in the object/table (instead of through the xml for each loop object).

• Edit/delete/add scene coordinates in the table during execution

  Hello world

  I managed to build table allows you to store and record the coordinates of the stage and remind to control steps. However, I need change/remove/add details of scene during execution. I also need to allow the user to directly edit the coordinate from the scene of the array. Wondering what someone knows what is the best way to do it? Or is it better to use the matrix or Cluster? Thanks in advance.

  Best regards

  Han Yen

  Han Yen wrote:

  Thanks much altenbach for all the advice. I tried to do a table 2D control. I've been playing with table in the control. However, I still can't find out how can I detect that I change the data in the table 2D with the more recent issue during execution? How can I then update my current table with the latest data?

  Well, the 2D table is updated immediately and you do not all the other tables.

  Do you mean that you want to update XAbs, etc. where the just changed line is already selected?

  In any case, here's a simple project, perhaps it will give you some ideas. I would recommend using also the tables for XYZPos, entrances etc. and the XYZabs. This simplifies the code because you reduce the number of terminals and table operations.

  Let me know if something is not clear to you.

• Problem with pl/sql procedure, trying to get the value of the user during execution

  Hello

  Using oracle 11.2.0.3

  Can run sql that gets the value of the user during the fine workmanship and also via an anonymous block.

  uses of SQL & Enter_Product_Number

  anonymous block using: Enter_Product_number.

  However, get problems when trying to create a pl/sql procedure, use one of the above

  relevant below tried code part & and: buit works do not error, try bad bind variable if used: and ora-600 if try use &.

  How can we have a procedure from pl/sql that can call and receives a value of user during execution?

  Only way around what I can think of is to pass parameters to the procedure

  Thank you

  create or replace procedure ins_into_issues is

  v_nd_rec_cnt number (10);

  v_normal_rec_cnt number (10);

  Start

  Select count (*)

  in v_nd_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & old_nd_product_number;

  Select count (*)

  in v_normal_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & normal_product_number;

  -code below commented above works.

  end;

  Hello

  what something like this:

  create or replace procedure INS_INTO_ISSUES ( in_normal number, in_old number )  is
    v_nd_rec_cnt     number(10);
    v_normal_rec_cnt number(10);
  begin
      select count(*)
        into v_nd_rec_cnt
       from refmast.issues i
       where i.iss_product_num = in_old;
    --
      select count(*)
        into v_normal_rec_cnt
        from refmast.issues i
       where i.iss_product_num = in_normal;
  end;
  

  concerning

  Kay

• Filter the Table during execution and keep uncommitted line changes

  Hello

  I have a requirement which has been quite difficult for me so far.

  I use the first version Jdev 12 c.

  I have a table of AF that is connected to a ViewObject that is used for sending new data.

  When I add lines to this ViewObject, I put a field that I intend to use for filtering so that the number of lines is not displayed at the same time.  This field comes from a selection of LOV.

  I want to be able to change lines are displayed in the table based on what is the current value of selection LOV.  This isn't a problem for me, and it works perfectly using a view criteria and a variable transitional EO I put in place.

  My problem is that when I select a new value in the LOV and change to bind the variable view criteria, I want all changes uncommitted to the lines to be preserved in the View object.  Currently, the lines are not keep their changes, and I need to do this, because after that the user has entered data for a large number of lines, there will be a commit to the database for all new lines added.  Is this possible or should I look for an alternative?

  I also tried to use a table filter in the link of the page layer, but I get an error that I can't debug. It is marked as Houston-34014.  In this method, I try to access my bean in pageFlowScope to filter the table.  This bean variable is updated when the LOV selection changes.  Error messages settings are {0 = oracle.jbo.Key [-220-225], 1 = root}.  I also read that this filter parameter is a static filter and does not dynamically during execution.

  Any help would be appreciated, thanks for reading.

  Hello lhymel

  I think that your problem is solved, so please close this thread and open a new thread for tuning related problem

  Thank you

  -Ashish