Defragmentation is not working - windows 7

Similar Questions

• Windows 7 Disk Defragmenter does not work

  All of a sudden, I get the following error message when you try to run Defrag

  "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again.',

  that does not work.

  Assuming that task scheduler was enabled and the Defragmenter tool still does not work, here is a routine that I have compiled over time which proved to be effective to solve the problems of Defragmenter:

  There are several reasons why the built-in Defragmenter may not work correctly:

  0. it is malware on the system. Solution: Run an anti-virus control and also a spyware check.

  1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  2. the disc is damaged and must be repaired. Solution:

  a. open "My computer" and right-click on the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  3. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:

  a. start - all programs - Accessories - System Tools - System Restore (click here to open);
  b. Select a good restore point before you start having problems with Disk Defragmenter.
  c. start the restore process and let an end (descriptive name of something restore operation as "Repair Defrag").

  4. There are other programs that run the Defragmenter interruption integrated. Solution:
  a. close all running programs.
  b. If you think there may be some programs that run in the background.
  c. press Ctrl + Alt + Delete and
  d. Select "start Task Manager".
  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  5. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  6. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking interference may not be easy. Note: Some versions of Windows 7 disables the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.

  7 Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

  There are several ways to re - install the built-in Defragmenter:

  A:
  a. open the menu 'start '.
  b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
  c. in the window that opens, find the file named "dfrg.inf.
  d. right-click on "dfrg.inf" and "install".

  B:
  a. go into "start > run" on your computer.
  b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
  3. click 'OK' to make the program automatically reinstall itself.

  C:
  a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
  b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
  c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing Defragmenter files.

  8. most of the problems will be solved by #6 above, but if not, and if your windows installation is otherwise working well, you should consider to download a free trial of a Defrag tool commercial rather than drastic measures to restore the functionality built-s. Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.

  Most third party programs offer a free, fully functional trial (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...

  Here's a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:

  http://Disk-Defragmenter-software-review.TopTenReviews.com/
  Place it at the top of the page is the only defrag program that also prevents the fragmentation (see comment).

  Why is it good to prevent fragmentation?

  Basically, it significantly increases life expectancy of your hard drive (especially since you don't have to leave the system on all night - a much 'greener' agricultural practice), not to mention it also increases the performance of the system.

  Find out what the review has to say on this.

  Good luck to you!

  Bill R TechSpec

  PS: If still no go, repair may involve editing the registry or repair installation of windows and possibly re - install windows itself. These aren't simple solutions. If so, indicate if they can be provided.

• Disk Defragmenter does not work.

  My Disk Defragmenter does not work... He asserts that he is defraging but the hour glass just stay there.  I tried to solve by disabling the Scheduler, but I am unable to take the green check mark in the box that tells me that this scheduler is enabled... Help, please

  Hello

  in vista, the defragmentation process works silently in the background

  you do not have to run it manually

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

• updated itunes,-, outlook, for, icloud, would not work, windows, outlook 10, 2016

  updated itunes,-, outlook, for, icloud, would not work, windows, outlook 10, 2016

  Error: 0 x 80040604: upward / POST: conflicts

  [Error: 0 x 80040604: Up/HdlPOSTr[p06-caldav.icloud.com/412/0#16/83]

  See if it might help - Error: 0 x 80040604: Up/POST: conflict

• Dfrg.inf is missing that is no doubt why Disk Defragmenter does not work. How can I recover it?

  How can I recover dfrg.inf?  It is absent and is probably the reason Disk Defragmenter does not work.

  An alternative Defragmenter that I use is defraggler is a free download at www.piriform.com/defraggler/download/standard

• Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

  Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

  Hello

  Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
  Cihan

• I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  See download Acrobat 7 and CS2

• Trackpad and keyboard are not working windows 7

  I just installed windows 7 and I do the first set upward but my trackpad and keyboard do not work, I tried to use a keyboard usb and bot mouse still the same, any help?

  FC5 drivers are installed? You can find the drivers in the links on installing Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• HP Pavilion x 360-m1-uoo1dx: Touch screen HP Pavilion x 360-m1-u001dx not working windows 8.1

  I had this original laptop with windows 10 of manufacturing and I downgrade to windows 8.1pro since I have to run a prgram that works only with windows 8.1.

  Now my touch screen does not work and can not find a driver, shows no pen or touch input available. I had also checked the Device Manager and see no HID for the touchscreen.

  Can someone please help me with this question.

  Hi @josemillennium,

  Thank you for the results. If the BIOS does not recognize the touchscreen, the pilot would not help because it does nothing to install on. Here's a link to the Computers HP - troubleshooting (Windows, 10, 8) Touch screen issues that I hope will help.

• Satellite A100 (PSAA9L) - the does not work Windows XP it has close

  Hello
  I recently put a satellite A100 (PSAA9L) and when I try to turn off the laptop. It shows the closing of the screen but does not work, stop.

  Please tell me what to do with this problem.

  Thank you!!!

  Hello

  There must be something wrong with the OS files or registry entries.
  Maybe some background process cannot be closed and therefore the shutdown process does not
  Microsoft has released a useful document about solve the shutdown problems in Windows XP.

  Please check this box. Maybe this helps:
  Resources to solve the shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029

• Z500 keyboard does not work windows 8.1

  Hi, my problem is that all of a sudden the keyboard does not work in windows. It works by entering the password, after that it does not work. knowing that yesterday it was working properly.

  any help?

  Thanks in advance

  I did a system restore and it solved my problem.
  Thank you for your care ^_^

• HP 15 laptop: wifi does not work windows 8.1

  I have Windows installed pro 8.1. I was using wifi on this laptop, it worked fine. However, recently, I see that the Wifi does not work although he shows me the SSID of my network I used to use and also the SSID of the networks of neighbors. (It means that the wifi on laptop chip is capable of scanning the wifi signals and so it works). The same router from which all other Mobile tablets, my home laptop work are able to connect to the wifi network. Only on this laptop I am facing this problem. What may be a solution or what I should try. I tried the steps listed here http://www.fixedbyvonnie.com/2013/10/how-to-fix-limited-or-no-connectivity-wi-fi-issues-in-windows-8...

  Although I have not changed the default settings only steps above on blog, I tried to solve the problem. However, it did not work. Also keys function + F12 on laptop has no effect. The light on the F12 key is always on. However, it is possible to toggle the wifi in the bar of Windows 8.1 charms.

  What should I check?

  I bought an external USB wifi device that solved the problem.  The card wifi on laptop works well, but for some unknown reason, he is not able to connect to home wifi router. http://www.snapdeal.com/product/leoxsys-150-Mbps-Nano-WiFi/1179610?utm_source=earth_feed&utm_campaign=TopPerformersPLAScaling3000&utm_medium=CPC&utm_content=1179610&utm_term=, & campaignid = 350311165 & 28373951005 = adgroupid & adposition = 1o1 & network = g & device = c & targetid = pla-55251503741

• HP Envy 17 J099nr: touchpad not working-Windows 10

  Just upgraded windows 8.1 10 last night after finally got my laptop working again (broke 2 times with perhaps years of use value) and now my touchpad does not work. It was working fine all day and now it just stopped. And if I try to go into advanced options of mouse all that he says are "control panel extension is incompatible with the version of the driver," but the stripping of everywhere I see all the drivers are up to date and does not even give me an option to update.

  BaggierGordon41

  Hello;

  Let me welcome you on the HP forums!

  I read your post on the sudden touchpad problems in Win10 and wanted to help.

  Unfortunately, Win10 forces automatically updates driver on each of us, without our knowledge and without our permission - and in this case, a work PC is suddenly 'broken '.  This could happen to you.

  You must go to settings, update & Essensials--> Windows Update.

  Then choose Advanced Options--> history to see when the updates have been applied last.  If you see one that include device drivers, who might be the problem. So, iff, you can, you should see if you can restore the drivers that are causing the problem.  Do you it by going into Device Manager, see if the wireless card is always listed and so, trying to restore the last driver update.

  And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.howtogeek.com/223864/how-to-uninstall-and-block-updates-and-drivers-on-windows-10/

  If it does not, an alternative is something known as a repair installation.  It is less destructive of all Windows recovery features and rewrites the Windows system files, leaving your apps, settings and data intact.

  To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10

  Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html

  After that, some people have reported is that, by going in the settings of the BIOS on the main tab, by changing the Advanced setting at the base, their features returned.

  If this is not the same for the BIOS settings, or if that doesn't work, you can try to use the synaptic website touchpad drivers: http://www.synaptics.com/en/drivers.php
  Note the comment on the page to set a Restore Point before trying one of these drivers.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Acer Aspire E - 15 (E5-571-332ko) Wifi not working - Windows 7 64 BIT

  Hi there we have a problem on the machine where we have down to Windows 7 64 BIT and we picked up the drivers from the Acer Web site.

  Unfortunately the WIFI does not work despite trying all three options in the Support Site for Windows 7 64 BIT.

  The laptop originally with Windows 8.1 which we didn't like. LAN works well.

  We made - put a new SSD drive in (of course to lift the keyboard because what was not so difficult and three ribbons inside that were given.

  Can someone advise please?

  I understood the problem and got it work. I was struggling to find the right driver, is necessary to find another for a same laptop from HP! None of Acer were those on the Web site as they are all for Windows 8.1

  I went to the device under System (Windows 7 64 Bit Ultimate) Manager...

  You must go to control panel > Device Manager then highlight the network cards. The wireless is here so click on it, go to properties and then click the Details tab scroll down to HardwareIDs and make a note of the four characters that follow FRI for the vendor, and the four after DEV for device.

  Go to http://www.pcidatabase.com and enter these characters into the two boxes that apply and take the path to the correct driver. When you find the list of drivers to the seller, they aren't ordering as well use facility search to your browser to track the details of the device. With luck, you'll have an executable file, but some will be a zipped folder.

  Found this info from http://www.tomshardware.co.uk/forum/43377-43-wifi-working-acer-aspire-windows

  So the point is to track down the correct driver by searching for the device ID (first four characters) and stalking the four characters (Vendor ID) when you browse through the list.

  Hope this helps some of you.

• my sounds do not work windows xp

  I have no sound on my computor my speakers do not work do I need sound drivers? IM using windows xp as my computor is a hp media center edition recenty I had a new Council and the video of the mother card installed nivida but the sound did not work when I come back it everything works just great, can someone advise please thanks!

  Hi jerry banks,.

  Method 1

  See the link below and run its available, convenience store playback control if it works.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2

  If the previous step fails then you will have to manually download and install the drivers for sound card on the computer by visiting the sound card manufacturer or computer manufacturer site, check to see if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658