DELETE or empty field containing the BLOB in the roacle table

Similar Questions

• Delete an EMPTY FOLDER in the all programs list.

  SuperAntiSpyware uninstalled from my computer. Now, the name appears in the list of programs, when you click on the Start button.

  I can't find out how to remove the empty file with the name of SuperAntiSpyware.

  Thanks guys...

  What happens if you right click and select "remove from this list"?

  The above is that if you have a shortcut for SuperAntiSpyware in the main part of the start menu.  If you mean that when you click on "All programs" you still see a folder named "SuperAntiSpyware" then open Windows Explorer and navigate to C:\ProgramData\Microsoft\Windows\Start start\program and delete the folder "SuperAntiSpyware".

• Empty fields in the data merge is originally from empty lines will appear. CS4

  I had this problem when I ask myself on my data merge info I origionally put phone and mobile phone on the same line which resaulted in the cell phone number split in two, as the column was not wide enough to display both side by side. I then moved the cell phone up to the next line but the problem number, then I had was that this would leave an empty line whenever I could meet someone who has not had a cell phone number. Anyone know how I can reduce this empty line when the phone line is empty?

  See your other thread where you have asked about it.

• Remove empty lines in the merged table

  I'm looking for a script that will find and remove empty lines from a table that contains fields of fusion.

  I have a table of data with about 800 cases. This table is used to merge a page report which shows the various components of the employee's income. There are about 20 lines in the table and 5 columns. I apply the merge fields to a table in my .indd file and merging works perfectly. However, there are several features/components of income who share not all employees. Therefore, all pages of the 800-page report contains several blank lines should I have deleted so that the remaining data lines to snuggle up to each other.

  I need a script that will find blank lines in an .indd table and delete them. I found the script that did this and works perfectly on an ordinary table with blank lines. However, it seems that a table cell that contains a merge field (< < myField > >) is not necessarily 'empty', even if the data in this field is Null. I found that after the merger, I can highlight a blank line, press DELETE, run the script, and the line disappears, as needed. But it manually thousands of times would frustrate the purpose of the script. Also note that I've rubbed my data file to ensure that no hidden formulas, characters or spaces. The "Remove blank lines for empty fields" option does not work on the fields in the table (it seems to me. If I'm wrong, let me know).

  It seems that I really need script which will remove references to empty merge fields after the merger. I could run and then my other script.

  I have spent hours on this and hope someone can point me in the direction of a solution.

  Thank you!

  You can remove the markers of merge field by doing a search and replace of TEXT PLAIN for and replace it with nothing. That should allow your script to work.

• Adding field in the item table programmatically

  Hello.

  I'm doing a generic 'engine' for generating test reports/certificates.

  I made a custom data containing type report item, I used to do a local variables array of report called table of report item items.

  The data type contains generic areas (chain of title elements, a string of type item, etc.) and a container of the element data.

  The idea is to increment the array of items to report with report items and then fill the data container of the element with the fields of for example a Table element container.

  Either that, or just add a field in the report item with the data Table element type.

  But I can't find a way to add fields programmatically in a container.

  Anyone know if this is even possible?

  Found!

  Using from one stage of education, who points to the array of report items using the NewSubProperty method.

  Finished with the following statement:

  Parameters.Report_Element_Array.InsertElements (GetNumElements (Parameters.Report_Element_Array), 1, 0),
  Parameters.Report_Element_Array [GetNumElements (Parameters.Report_Element_Array)-1]. NewSubProperty("Element_Data",PropValType_NamedType,False,"NSE_Report_Table",0)
  
  

• Removal of spread that contains the current Table

  I'm editing a document (I didn't create) where gaps have been implemented tabular. A table will continue spread after spread within a chapter. The
  problem is when I need to delete a propagation is no longer contains content text in the table, but still part of the text thread. I can't do this without breaking the thread of the text in a way that I can't continue text in the next release. I can't get rid of the unnecessary propagation from one table. If I try to delete the table, the entire table (on all the pasta spread) is removed.

  I discovered a work-around where to move the table size spread to the Board to block the spread above or below. Then I can remove the spread and
  the thread of the text remains intact. But I know that's not ideal. Any ideas?

  I assume that you work with the living, no master page frames.

  When you delete a page (or deviation), you remove them * objects * on this page, but you do not delete text (or the paintings, which are part of the text) that originated in a story in another frame and is threaded through a frame on this page.

  So, if you have a text threaded through frames, starting at page 1 and continue on page 10, if you remove the 2 page, you removed the * framework * page 2, but not the text on page 2. The text of page 2 got just pushed on page 3, which became page 2 and so on, all the way to page 9, which should now show an excess.

  In your case, if you want to remove a value any spread of table, first remove lines from the table displayed in the image that crosses this spread (and everything that was on the next release flows to the page that you are using), and then delete the spread itself.

  Ken

• I am not able to see all the fields in the Contact table available on the report of the Contact field values?

  Hello!

  I'm looking at an instance of Eloqua shows that 10 of the possible 100 s of the fields in the table contact E10.  Where are the rest of the fields?

  Kind regards

  Alok

  Hi Alok,

  We have seen, the installation program for all sorts of things, but you can set a maximum to see everything you want to see. If you are the administrator, you can go to settings-> fields & views. Here, you can switch around with how you want it to look.

  Kind regards

  Alok

• What to fill in 'field of the temporary table' for global temporary tables?

  Hello

  I use the Data Modeler 4.0.1.836 and everything that I put in the box 'the scope of the table temp' for a global temporary table doesn't seem to affect the DDL script about the ON COMMIT PRESERVE/DELETE the LINES option. The script poster ON COMMIT PRESERVE ROWS always anything.

  Yet, some of my temporary tables must be created as ON COMMIT DELETE ROWS.

  Using the Data Modeler wrote about it:

  Scope of the temporary Table:

  For a class as a temporary table, you can specify a scope, such as the Dimension or the Session.

  Not sure what 'Dimension' has to do with the scope here, but it makes no difference.

  I tried to put 'Session', 'Dimension', 'Operation', but no luck. So what is the text for the script generate ON COMMIT DELETE ROWS?

  Thank you

  Hello

  The temporary Scope of Table property (on page Types of Classification of the table properties dialog box) is purely documentary.

  To set ON COMMIT DELETE ROWS you must expand the browser for the relational model and find the node for the relevant Oracle physical model.  If you develop it you will find an entry there for your Table. Double-click on that to get the physical model properties dialog box for your table, and you will find a "Temporary" facility that has options (Preserve Rows), YES (Delete Rows) YES or no.

  David

• Choose field from the joined table based on another field?

  Hello!
  
  Is it possible to select a field in a row of attached table based on another field? Consider the following data in the CVALUES table:
  

  ID  C1   C2    C3    C4    C5    C6
  T1  9.6  10.3  12.4  19.6  19.6    0
  T7  9.6  10.4     0     0     0    0
  T3  8.2   9.9  11.4  19.6  19.6    0
  T8  8.3  10.7  13.5  20.7     0    0
  T5  9.4  10.3  12.7  22.9  19.6    0
  ...

  And the following data in the table MDETAIL:
  

  ID           MDATE        CNUM     ...
  T1  03/28/2012 18:00:00    4
  T1  03/28/2012 18:00:00    1
  T8  03/29/2012 06:00:00    6
  T8  03/29/2012 06:00:00    5
  ...

  I want to get the column corresponding to the VALUE field in the table MDETAIL CVALUES. I'm doing this:
  

  SELECT m.t1, m.mdate,
         CASE WHEN m.cnum = 1 THEN c.c1
              WHEN m.cnum = 2 THEN c.c2
              WHEN m.cnum = 3 THEN c.c3
              WHEN m.cnum = 4 THEN c.c4
              WHEN m.cnum = 5 THEN c.c5
              WHEN m.cnum = 6 THEN c.c6 END AS cvalue
    FROM mdetail m
    JOIN cvalues c ON m.id = c.id

  The CVALUES table records are unique; only one line by ID.
  
  This method works and it's fast, but it's messy code and I think there must be a better way to do it. I use cvalue value in several calculations so each calculation that I use is this giant glob of CASES inside!

  Hello

  With a decoding it would be easier, but as ugly :-)

  SELECT m.t1, m.mdate,
         DECODE( m.cnum , 1 , c.c1, 2, c.c2, 3, c.c3, 4, c.c4, 5, c,c5, 6, c,c6) cvalue
    FROM mdetail m, cvalues c
    WHERE m.id = c.id
  

  Success!

  FJFranken

• Empty line in the Advanced Table

  Hello
  
  I have an advanced array "DelegatedRN" in which where clause is pragmatically the processRequest by
  
  OAAdvancedTableBean = table
  
  * (OAAdvancedTableBean) webBean.findChildRecursive ("DelegatedRN"); *
  
  table.queryData (pageContext, false);
  
  and it is fetching the correct records, but it adds a blank record where ever the rendered page.
  
  Please tell us how can I remove the empty file of the table.
  
  Thanks in advance to all.
  
  Kind regards... Ashraf

  Hi Ashraf,.

  Do a validation test to see if a new line is created (in the application process) to the original version attached to the table.

  Thank you

• delete all, then insert into the target table, two steps in one transaction?

  Hello
  
  We have the following two steps in one ODI package, it will be managed in a single transaction?
  
  procedure step 1): remove all of the target table.
  interface in step 2): insert data in the source table in the target table.
  
  our problem is that step 2 can take some minutes, and then the target table can temporary unusable for end users who try to access it, I'm good?
  
  Kind regards
  Marijo

  Hello

  It can be managed in a single transaction by selecting IKM as the Append and TRUNCATE/DELETEALL Option command in the FLOW of an interface tab.

  Thanxs
  Malezieux

• Empty field prevents the user to connect

  Good afternoon

  How to prevent a user to digitally sign the document if there is a blank field.

  The issue I'm having is that the digital signature line appears. When the user connects, the document is saved. After you run, my java code running the signature of compensation.

  The thing is that we have a document saved with a signature in there.

  Is it possible that I can have a JavaScript to prevent the digital signature line if a field is empty?

  You must place the entire code after 'else' braces, as

  you have done with the code after the if statement.

• Empty field in the load data

  Hello
  
  The customer have a rules file normal, like this:
  Dim1, Dim2 Dim3, Dim4 data
  
  but the workload file can have empty values for member name (end user errors)
  data, 'member1_dim3', 'member1_dim1', 'member1_dim4', 'member1_dim2 '.
  "member2_dim1", "member2_dim3", "member2_dim4", data
  
  Essbase does not send the error to the execution of the load and use the name of the previus sign (member1_dim2 in the example) and the sum or replace data values
  
  The customer needs an error or a warning, how can I force it? or do a load without the registry with the field empty.
  
  Thanks and greetings
  
  Published by: AlfonsoB on 11/25/2009 13:14

  There has been several threads about this. You can have null values to replace rule with a default value. To do this
  Create a text with a characher column or a word I like a Tilde ~.
  Then attach it to the dimenison column (the newly created column should be the first)
  Then, go to the properties of the field and replace the tilde with a default member name (or if you want the line to reject replacing the ~ with something like "reject me" make sure that you check replace whole word only.)
  Then replace ~ nothing of course replace whole word is not checked.
  If you look at the line, you shouldn't see any tildes.

  Repeat for each dimension column that can have NULL values.

• I deleted a file that contains the entire set up of the files. Now my phone will not work. Help, please.

  Original title: re - install

  Hi, can anyone help? I use Vista Home Premium on a Toshiba laptop.

  Recently, I deleted a file from D: drive (which has a system set up files etc.). I received a message that "Auto back up had no" and I tried System Restore etc, but nothing worked. I then ran Chkdsk and this allowed Auto back up to go back to my external HARD drive. After Auto save, I checked the drives and horrors, D: drive was full and in the RED.

  I tried the F8 recovery console, but when I tried "Recovery system" (which keeps intact all my files and settings), I was informed that there were "no back ups on the computer '." I tried to use back ups of my external HARD drive, but nothing, still got the same message. In the same Message window, it asked me to insert an of my previously recovery disks. I tried two discs, but got the same message as before.

  My computer works always, but with a drive D: saturated, but if I do a full re-install, the computer back to its original state, I have to make copies of all my data (info from year 8) backup, or that I can then re - install the files on my external HARD drive?

  Follow the steps mentioned in the given article

  http://www.ehow.com/how_5108136_restore-Windows-system-files.html

• Adjustment of focus and the deletion of a field after the length control

  I have a form I'm working on that requires a few basic length checks but I have a problem with one of my fields. In the case of change, I have this:

  If (xfa, event.newText.match (/ [^ 0-9 /])! == null) {}

  this.rawValue = null;

  xfa.host.setFocus (this);

  }

  ElseIf (xfa.event.newText.length > 9) {}

  this.rawValue = null;

  xfa.host.setFocus (this);

  }

  but it will not draw the field or set the focus to the field when he fails to verify. I'm not sure what the problem is.

  Thank you!

  I use dynamic PDF... the code I gave you behaves exactly how you want it to be...

  the problem with your code when I test it, is because when you use the corresponding method, it does not return true or false, it returns only the first character of the string... you should try using the RegExp object rather...

  In addition, when you try to use (this.rawValue = null) in the case of change, it cannot apply this line of code because the rawValue of the field doesn't have a change not yet, no, unless you have left the field. You should always use the xfa.event when you try to play with the value in the case of change of a textfield...

  So try instead... I hope it will work

  var reg = new RegExp(/[^0-9]/);

  If (reg.test (xfa.event.newText)) {}

  XFA. Event.change = "";

  xfa.host.setFocus (this);

  }

  Do not use else if

  If (xfa.event.newText.length > 9) {}

  XFA. Event.change = "";

  xfa.host.setFocus (this);

  }