Delete the template project

Similar Questions

• I accidentally deleted the entire project.

  Restores possible in Sketch?

  Hi Sergra,

  No, I'm sorry. It's not once you type in two confirmation dialog boxes remove.

  There are two ways that it can be recovered, but both methods require special circumstances:

  1. If you were offline when you deleted the project, then the deletion has not yet synchronized to the cloud. In this case, stay offline on your device and connect to http://assets.adobe.com (My Active - Mobile Creations - Sketch), and then make any changes to the project (for example. Rename it). Then, when your iPad comes back online, the new edition will cancel the deletion and your project must synchronize down to your device.

  2. If the deletion already made it back to the cloud and you can no longer find your project on assets.adobe.com, so if you have another device that has Sketch installed, you can try to disconnect this device, launch the application and make any changes to the project locally (renaming). Then, when this device comes back online, the new edition will cancel the deletion and your project must be re-downloaded back to the cloud.

  Hoping that it might help.

  Sue.

• Can combine two separate the AE project files to become a 'real' individual project?

  Can combine two separate the AE project files to become a 'real' individual project? I know that you can import a project into AE. But if you delete the original project your imported (outside), you also delete the project imported into your new project. I could have sworn there was a script or function that does this somewhere...

  Any help would be greatly apprecated.

  Thank you

  Thanks Rick,

  Bad choice of words on my part that I meant what you just described. Thanks for your clarification. However, I found the script I mentioned that if anyone is interested. It's called rd_MergeProjects

  http://Provideocoalition.com/mchristiansen/story/after_effects_script_of_the_week_rd_merge projects

  Kind regards

  Louis

• How to remove the template and editable regions?

  Hello world

  I posted this question earlier in the area of discussion web to ignore a specific Dreamweaver forum. Sorry for posting in two places.

  Since last week, I learned Dreamweaver CS4 to an on-line tutorial. I got to the place where I have generated a model (index.dwt) homepage (index.html) and created boxes on it. At that moment, I realized that I had done all the steps of the Rota and that he didn't really absorb what I was doing. I wanted to delete the model to repeat and acquire a better understanding of the process. When I tried to remove the editable regions (change-models-remove editable regions), I was unable to do so because 'remove the editable regions' is gray. Nor I was able to remove the html code. I tried to delete the template itself, but when I did, the index.html page kept these editable regions! Can someone tell me if there is a way to get back to the place I was forward to create the model?

  Thank you for any assistance.

  All you need to do is detach the template index.html file.  Then you can remove the template and start all over again.

  Go to the menu change--> models--> detach the model

• How to delete a picture library "referenced" without deleting the original photos in the application which is used to compensate for my projects?

  I made the mistake of setting up Apple Photos on my Mac Pro using the library option "referenced" (which is where my computer file are not copied in the Photos). However, throughout the year, I started to do the 'projects' in pictures by which I copied some files of original photos in the Photos app. My library is now made up of a mixture of many referenced files and some originals copied into the app.

  Now I did some heavy reorganization and clean up the photos in my computer folder, but obviously none of these changes can be found in the photos referenced in the Photo app.

  My goal now is to started using iCloud Photos but I want to do with a clean slate (i.e. without using one of the current referenced library that I have pictures).

  I have two questions:

  (1) is there a way to Photos to delete ONLY the pictures that are files referenced and not the originals that are copied into the app?

  (2) if the above is not possible, then what happens to my projects if I simply delete all the photos I have in the app? I'll always be able to see the photos of the calendar, that I did for example?

  I'm afraid that if I delete my entire library I will not be able to access my projects more in the future. Does anyone have any suggestions on how I can manage this?

  Thank you very much.

  A

  You can consolidate all of the photos that are referenced. If you have used photos referenced in the projects (calendars, books), select the photo in your photo library and use the command "file > consolidate."  This will copy the original referenced in your photo library.

  

  To find all the files referenced requiring consolidation of create a smart album:

  File > new Smart Album

  Set the constraint for the album 'Photo is referenced.

  Now you have all the photo referenced in an album. You can select the photos in this album and either use ' file > consolidate "to copy in the library or press the ⌘⌫ key combination to delete the picture from the library.

  Before you consolidate or remove a photo referenced, using ' file > reveal in Finder ' to view the original file.  This way you can remove the copy on your disk after you have removed the photo from your photo library.  If the referenced file is left behind, pictures will not remove.

  If you want to use your photo library with iCloud photo library, it is essential to consolidate the pictures referenced, because referenced photos cannot download on iCloud photo library.

• How can I delete the old images payne so I can start a new project?

  When I open the program WMM old files may appear in the payne.  I don't know how to delete the old images, so I can start the project.
  Can you give me some advice?

  Hello

  Follow these steps to delete old projects in Windows Movie Maker:

  a. open Windows Movie Maker.

  b. click on open.

  c. now, select the project.

  d. right-click on the project and click on delete.

  A confirmation prompt will appear on the screen, click Yes.

• Sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again. "Error: 0 x 87160129" during video editing in Windows Movie Maker/Windows Live Movie Maker

  I use the same device which was used to make movies in the past with no problems. The error message is sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again. Error: 0 x 87160129

  I've never had any problems with this before and made more than 100 movies using WLMM or WMM. Thanks for any help. Would that my camera settings? I use a Lumix.

  I just found out what the problem is freakin ' and the solution. If the inserted videos have different "video codec" then it will not work!

  Before adding videos to Movie Maker, throw in a video converter and convert them all. (Even if the original format is WMV, convert again to WMV) that will ensure the output videos have the same codec!
  This solved the problem for me, hope, it does for you too...

• Deletion of a project in insight source (trial version) that has been mapped to a network drive results in the Stop error code 0 x 00000027

  Deletion of a project in insight source (trial version) that has been mapped to a network drive in clearcase... .the deleted when I got this error...

  Kindly give me a solution...

  Original title: error code 0 x 00000027

  At the error repeated or leave all the undesirable consequences? Unless there is probably not merit to be investigated further.

  Verification of bug code 0x27:
  http://msdn.Microsoft.com/en-us/library/ff557446 (v = vs. 85) .aspx

• can I delete the temporary chm without messing up my project?

  I have a huge project with 33 folders, and about 20 000 htm files. Build a chm file, and there is a copy of each file in temp of chm files. If I try to do a search on the entire project, it also search these records. I wonder if I can delete these temporary files without screwing up my project. Thank you.

  Hello

  No matter what with the Temp it is subject to demolition. You should be fine.

  I believe that RoboHelp creates before compilation of CHM. It * SHOULD * be clean once finished, so it may be necessary to some research that occurs as to why they are being left behind. Unless, at some point the process fails.

  See you soon... Rick

• How to save accidentally deleted the project?

  I think that I lost hours of work. I am new to the thought of p. I would try to close the window with command-W, the narrow keyboard shortcut window standard Apple. Instead, it close the window of editing... and somehow... in a fraction of a second non - thinking, what dialog box save came I clicked on save. I frantically clicked Undo, but too late--it seems now all the work I did was gone. I don't know how or if I can get it back. I tried to reset by default under the workspace, but which opens a window of timeline of the sequences not empty, as does restart PP.

  Unfortunately, Im not not using Time Machine backup for now.

  I delete my entire project?

  His only recorded as "closed".

  The sequence will be in the project window.

  Double click it to open it.

• Is it possible to delete the project emailings?

  Hi all

  I would like to know if it is possible to delete the project emailings. Some of my clients have fun train on email marketing, but now there are a lot of "tests" which makes it quite confusing when you look at the screen of the campaign.

  Thank you

  David

  Right-click on any

• Impossible to import the same project name as a previously deleted

  I had a project in Flash Builder, I needed to update; the old version was a Flash Professional project using a FLA, but the new version uses a different folder structure and XFL. I have a click with the right button on the old project in Flash Builder and choose 'Remove', then choose the option "do not remove content". Then, I renamed the project folder and put the new version of the project with the same name of file, in the same place.

  Flash Builder doesn't let me import the new version of the project. It will take me through the Import Wizard, but when he finished nothing appears in Flash Builder. Almost seems as if there is a flag 'permanently ignore this name forever projects' hidden somewhere, although I hope that FB was not inflexible. Anyone know how to fix this? Thank you.

  Eclipse has serious problems with distinguish uppercase / lowercase in project names and will be silently fails if the name of a project changes in the case. Apparently even if you delete the project, then rebuild. So I had to change the capitalization to match the previous version.

• Remove the application project without deleting

  I have an application with only 1 project, but it uses another another application as a library project. To develop easily, I added the project to the application, but I no longer need so I want to remove the project from my application, but the project should not be deleted.
  When I right click on the project, I don't see that delete the project, nothing that looks to close project or something...

  Select the project that you want to delete in the application browser, press the DELETE key and you will see another dialog box that asks you if you want to remove the project from the application (workspace) or remove it completely. In your case, option 1 is what you want to do.

  Timo

• Could not delete the .dwt file 'Templates '.

  Hello

  I accidentally downloaded a file .dwt as model instead of a .htm and when you try to delete

  I get the following error:

  

  In the admin of the site - pages - when you select the model, you get this error subsequently saw the .dwt model (that you can't remove) in the folder:

  

  If you try to delete the file in the admin area - there is no visible model to remove:

  

  Is there a way to get around this?

  See you soon

  Dave

  Ah, I see that you do not use DW to upoad model.

  If you use a third party FTP program, you must have EU at the end of your settings of username in your FTP program.

• The Template Variables and advanced actions

  I created a template to 8 Captivate, which includes several variables user and advanced actions (the model was created with Captivate 7.)

  When I create a new project from the template, Captivate automatically creates duplicates of all the variables user and advanced actions changing the names slightly (add numbers at the end). The thing is now I have twice as many actions and variables, and Captivate does not allow me to delete the shares referenced by the model. How to avoid this?

  Is it possible to return to the original set of variables user and actions on my project? Thank you.

  The upgrade often cause this kind or problems. Normally, you should be able to easily remove CP8 variables, but of course, I do not avoid upgrade especially when the characteristics have changed as is now done with stocks shared in CP8. I agree that it would be easier if the upgrade still worked smoothly, but learned after so many years with the software that it is rarely the case.

  The case you describe is perfectly suited for common actions, I even used it as an example in an online seminar I did (always for CP7) and definitely want to show it again if I ever get the chance to make another or provide training. Creating a library with shared actions that you can use over and over again now is no longer a daydream. No need for a model reuse advanced actions.

  Lilybiri