Dell Inspiron 1545 laptop computer. Connected battery does not support. Can I use the adapter of a computer Dell Inspiron 630 M laptop?

Similar Questions

• Connected battery does not support 11%

  Question, that of why the battery is holding at 11 percent, hip but not load? I can do to remedy this? What may cause this etc... ?
  
  Early in the morning of 10/07/2016 shows 11% battery not charge.
  
  I plugged last night during the 9 p.m. Mountain time.
  
  After connecting, I was running Utorrent 3.4.9 of the overnight download of some files.
  
  A pilot plant was held yesterday 373.06 out ready driver NVIDIA GEForce game date 10/05/2016 - cost very spotless and without incident.
  
  I have two cables of load. Both worked fine yesterday.  Both are connected to a different location on a different circuit. Overvoltage protected by Belkin.
  
  Thank you, and here are my coordinates of the system.
  
  Name of the operating system Microsoft Windows 10 home
  Version 10.0.14393 Build 14393
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name XXXXXXXXXXXXXX
  System manufacturer Hewlett-Packard
  HP ENVY 17 Notebook PC model system
  System Type x 64-based PC
  System SKU xxxxxxxxxx
  Processor Intel Core i7-4510U CPU @ 2.00 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.42, 18/03/2015
  SMBIOS Version 2.8
  Embedded Controller Version 77,53
  UEFI BIOS mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  Start secure State
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.14393.206".
  User name xxxxxxxxxxxxxx
  Time Zone MST
  Physical memory (RAM) installed 12.0 GB
  11.9 GB total physical memory
  7.90 GB available physical memory
  13.7 GB total virtual memory
  9.38 GB available virtual memory
  1.81 GB page file space
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  Hi @gdcgray,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you have a battery problem with an error "plugged in, not load ' and the battery does not fresh at all. It'll be a pleasure to help you with this.

  A remarkable work has been done by you by performing a basic troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  It certainly looks like the battery needs to be replaced. However, let's first establish that it is the battery and not the connector of battery on the motherboard that is defective controller.

  Please follow these steps.

  Please try a hard reset first. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and reconnect the charger
  • Please try to calibrate the battery.
  • Please update the bios from this link http://hp.com/drivers
  • Run the battery from this link: http://support.hp.com/in-en/document/c03467259

  Please run all the tests of components and if the battery is not please take note of the failure code.

  I hope this helps. Please let me know how it goes. I really hope that the problem is solved without hassle and the computer works great. Thank you for being a part of the community of HP. Please let me know if this can help, and if this is the case, please mark this message as a "'Solution Accepted". " Kudos would be also greatly appreciated for my efforts help. You can simply click on the ""Thumbs Up "button. "

  Thank you and have a blessed week ahead!

• 0% connected battery, does not support

  I have a Hp G6-2197sa,

  The battery is at 22% and suddenly, it goes down to 0% and hip said, does not support. Although I have not plugged in the charger cable.

  The laptop still works at 0% for 5 Minutes, but then turns off suddenly.

  When I load it's fresh at 0% then jumped sharply to 22%, but sometimes it does not jump, it goes to 1%

  You should probably just calibrate the battery, see test and calibrate the battery (Windows 7).  Batteries degrade over time, and eventually the battery meter in Windows will not be synchronized with where the battery is upwards to (for example it will show he is more power left in the battery, it really is).  Calibrate the battery should put the battery meter back in sync with the battery at this time.

  R

• Scanner EPSON Perfection V200 Photo: PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer.

  The PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer. I downloaded the 64-bit Epson software for the scanner.

  I found the solution to the problem, and it is indeed with the revised in Windows 7 Control Panel.

  Here how to solve the problem:
  Go to the control panel in Windows 7.
  Search scanner in the upper search box to the right
  You will see a "view scanners and cameras".
  Click it, you will see the Epson Perfection V200. Highlight.
  Click Properties, then Yes, then events.
  Where it says select an event, you MUST choose the event suitable for each option.
  To the Start button, choose Start the series of creativity
  For the copy button Choose launch Epson Scan
  E-mail button also Epson scan
  PDF includes Epson scan
  There you go.
  Now, all this was not necessary before, there are no instructions, and the fault lies with MS. how much more confused MS will do the control panel?

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• Extended subscription. The transaction went through. Account status - does not apply. To use the product may not. What should do?

  Extended subscription. Crossed the transaction. Statement of account – does not apply . To use the product can't. What to do?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

  I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

  I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

  I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

  SP1 Windows 7 Professional 64 bit

  12 GB OF RAM

  2-Intel Xeon E5640 (16 sons) processors

  NVIDIA GeForce GTX580 1536 MB memory graphics

  PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

  Problem solved!

  My Antivirus software was in the way. Once I have updated, things work fine.

  Thanks for your help!

• "Your browser does not support iframes, please use a different browser.

  I take an online course and this message appears when it is time for me to take my comments to the chapter.

  While I'm able to pass the test, I can not press 'continue', so I can't submit my test results.

  At the bottom of the control box it says "your browser does not support iframes, please use a different browser."

  My OS is updated, I upgraded to Adobe Flash and Reader, but I have no idea how to solve this problem.  I really need to be able to present my test results and unfortunately I lost several hours trying to figure this out.

  Safari supports iFrames.  The problem is the web site.  Contact them for support.  Or download a browser like Opera or Dolphin kick in one of those web site

• My cursor does not work in Blogger using the Safari browser.

  My cursor does not work in Blogger using the Safari browser. I am able to type, but the cursor seems to disappear when I'm in blogger.  It is difficult to navigate if you do not see where is the curse. I used all the other browsers, and this does not happen with them.  In the Blogger help forum other people experiencing the same thing.  He has been as well as a few weeks and I can not say definitively if it coincides with the updates to the OS. Any help would be appreciated.

  I have the same question too! Is there any ideas on how to solve this problem? So frustrating when you can't even say where you are on the page

• Foreground color does not change when I use the color picker.  CS6.

  Foreground color does not change when I use the color picker.  CS6.

  Your document is in grayscale, convert color (Image > Mode).

• your processor does not support long mode. use a 32-bit Vmware Data Recovery distribution

  Hi all

  When I tried to start VM in Vmware Data recovery, her gives me error as

  "your cpu does not support long mode. use a 32-bit distribution"

  I tried searching for the 32-bit version of data recovery, but not able to find out.

  Help, please

  Kind regards

  Selim Desai

  You can add a 64-bit host to a virtualized session of ESXi. The ability of VT is not transmitted to a guest operating system.

• Nexus10 version does not support pdf files in the web site.

  I have a new Nexus 10 and installed Firefox and the Epson Print software. When I go to the bath of Rockville and center of fitness, full screen, it will show me a button on the right side hourly. Click on that to start a download (it should just show me the contents of the file as does the true Firefox). If I go to the download section of Firefox, the download is listed, but when I try to do with the word app, it says that the file is not present. If I try to do with the Epson application, she argues that the application has stopped. If I go to epson print and look around, I can find the file and read it. But it's exceedingly complex.
  The same died of problem with crome, crome, but does not support full screen. This problem is not present on the ipad from apple with the web browser by default.

  in the original post, I am fearless "PDF viewer" as a name for a standalone application, and as I said in my reply, I installed this app. you suggested that what I needed was an Add on Firefox. I installed this add-on and could see page.
  I think you still have a bug in the download page, so that it appears not to pass the correct name to the app non-firefox that you want to use.

• Adobe lightroom does not update when I use the application manager to download upgrades.

  Hello

  I have problems with adobe lightroom.  It is not updated when I use the application manager to download the new updates.  I tried to uninstall the application and re-download it, however the application manager will not allow that to happen because it shows that it is already installed and up to date. I think that the problem may have started when I installed lightroom using a link which you offered when creative cloud first started offering of lightroom.  This version of the program does not appear to work with the application manager.  Please let me know what I should do to fix the problem.

  Best regards

  S

  Hello

  Please, try to remove Adobe Extension manager and install again. The reinstallation of the extensions Manager try to day light the room.

  If it does not resolve that question please make a complete own using adobe cleaner tool and reinstall everything.

  Thank you

  Kapil Malik

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• Dell Mini 10 1018 Factory Restore - user does not know how to use the Dell utility

  I was running a starter edition of Windows 7 and decided to go with a picture own factory before moving on to Windows 10. My mistake was thinking that recovery Dell utility would work.

  I created a restore 8G USB key using the included Dell utility. I reboot from the USB and restore to factory. He gets the part of the way through and then seems to get confused, re - access scripts folder TAL and stuck in a reboot loop.

  Help!

  Update - Yes, it's a problem to the user. I did not notice the cleaning Sysprep prompt shortly after the resumption. If it is not allowed to run, Sysprep never ends. I have not seen documentation on this, but in my last attempt, I must have selected the appropriate parameters for the cleaning of Sysprep to get off the machine and let Windows finish the installation.

  Mduh9,

  Glad that you solved it all. Eventhough, 10 Windows can install on your computer and load default drivers. Dell has not any Windows 10 drivers for the mini and did not check Windows 10 for this computer. Make sure that you back up your data before installing Windows 10 in case it does not work.