Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed...

Similar Questions

• Reference Dell wireless wlan network contoller care stopped working and was closed

  When I sign on my computer a pop box message titled: "dell wireless wlan network contoller care stopped working and was closed" and said "a problem caused the application to stop working correctly. Windows will notify you if a solution is available. "whenever I close the dialog box, it reappears in 10 seconds, say the same thing. i've tried looking for updates and correct the problem, but so far nothing is working even my wireless (of course). I don't remember the updates or installations on the eve of what is going on has begun. I had a few downloads, but those who were on a week or two ago and I have had similar to those downloads of before and it did not.  they the day before I started getting this message didn't notice or do something out of the ordinary on my computer. Help! Please and thank you.
  Oh and I get another message when I first turn on your computer but unlike the other reappear... and says something about an error with C:/Windows/System32/onex.dll and asked me to open it, but windows can not open it and I do not know what program to open it with and by using the internet option no longer works.

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 to set the computer to a normal startup.

  Method 2: I would say as update you the WLAN driver and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Run the hardware and devices Troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• "Driver Installation module stopped working and was closed" error nvidia

  Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

  Since installing I can not any version of the nvidia drivers graphics card to install.

  "Driver Installation Module stopped working and was closed" is the error that happens every time.

  IM immensely frustrated by this

  Why you post twice?
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=114172#114172

  Recommended to follow only a single wire

• Installer of Modules of Windows has stopped working and was closed

  Hello
  I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago.  When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed."  I have already reinstalled Windows Updates and Microsoft Updates, nothing helps.  Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
  Help?
  Thank you!

  Greetings mollypopsicle,

  I see that we have always had problems with this update.  This leaves me with the question about the possibility of fi computer update auto is damaged during download.

  I would like to have you create a folder on your desktop.  Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.

  If you have a download manager, please use it to download the KB958623 update from this Web site

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20

  Make sure you use the version of Windows Vista that applies to your system.

  Once the download is complete and before running the update

  1. Restart your system in safe mode with networking, as described in the above post from Brian.
  2. Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
  3. If this does not properly complete, were there a pop-up Windows indicating that an error?  If so, what were these errors?
  4. Maybe it's that the error you receive is that this update does not apply to your system.  If so, this update can be hidden in your list of updates.

  Here is a link on how to hide the update

  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx#EZH

  Select only the I'm getting offered an update from Windows that I don't want.

  However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition.  Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.

  Thank you and continue to keep us informed of the State of this update.

  Best regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Message "Microsoft (C) Register Server has stopped working and was closed" appears

  When I start up I get the message "Microsoft (C) Register Server has stopped working and was closed".

  Here, an article which offers a solution to this problem that seems easy to implmenent and is worth a visit: .

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Audio device Graph Isolation has stopped working and was closed.

  I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. »

  the error report is:

  Signature of the problem «»
  Problem event name: APPCRASH
  Application name: AUDIODG. EXE
  Application version: 6.0.6001.18000
  Application timestamp: 47919284
  Fault Module name: AUDIODG. EXE
  Fault Module Version: 6.0.6001.18000
  Timestamp of Module error: 47919284
  Exception code: c0000005
  Exception Offset: c 000070 0
  OS version: 6.0.6001.2.1.0.256.6
  Locale ID: 1033
  Information additional 1:3502
  More information 2: a465924573e02e7dbf28b31e7ea12c28
  Additional information 3: a4b
  Additional information 4: 91409072175cd5a219bdca7388005249

  Additional information about the problem
  Bucket ID: 932674242 "

  This is on a DELL XPS M1710
  I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.

  No software installation seemed promt it.

  What are my options?

  deafinhum,
  If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged.  If this does not work, you will need to do a repair of your Vista installation.

  Here is an article to help you with the repair process.  Please let us know if you need more assistance.

  http://support.Microsoft.com/kb/936212

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Errors NT Service stopped working and was closed"and Windows Explorer has stopped working"

  Original title: NT service

  "NT service stopped working and was closed" appears on desktop screen after signing in. In addition, "Windows Explorer has stopped working" appears when trying to access to the "view network status and tasks" or "set up file sharing" in the control panel. However, I am able to access Internet Explorer without problem. What is the problem?

  Hello

  1. you hear that you receive the error at startup after you have signed in to the user account?

  2 have you made any changes to the computer before the show?

  NT Service stopped working and was closed because:

  Method 1: Try to start the Services.msc services and see if that helps, manually.

  (a) click Start, type services.msc and press enter

  (b) search for the following services

  (c) Net.Tcp listner adapter

  (d) the Net.Tcp port sharing

  (e) make sure the status of services started and startup type is automatic.

  (f) click on apply and Ok.

  Method 2: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

  Explorer Windows has stopped working the issue:

  See the following article:

  Important notes:

  ·         You can exclude scan SFC in the following article:

   

  ·         When you have finished diagnostic using the clean boot, follow step 7 article to start on normal startup.

  ·         The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  ·         Before Inplace upgrade, be sure to back up data.

  Error: Windows Explorer has stopped working http://support.microsoft.com/kb/2694911

• "Windows Media Center Receiver service stopped working and was closed" - Windows Vista Home Premium SP2

  Several times, I get the error message "Receiver Service Windows Media Center has stopped working and was closed".  Windows then search a problem and suggests that I run the update.  I run the automatic update and am completely up to date.

  Any ideas of what could be the cause?

  Thank you
  jbthorsen45

  Then, I found my problem.  I have installed the Tivo Desktop Plus.  The codecs it uses to convert to different formats somehow in conflict.  So, I had to rename some of the files and he immediately recognized my Tuner card and Media Center is back to life.

• continue to spread the message ' desktop window manager has stopped working and was closed ".

  continue to spread the message ' desktop window manager has stopped working and was closed ".

  The office then blinks and I can't use the Aero feature.

  Any correction or known issues?

  Thank you
  in2stocks

  Hello
  It is usually a video driver issue. Would like to know what controller you have and see if the manufacturer has a new driver for Vista.
  Please let us know if that was the issue.

  Mark <> Microsoft Partner

• That spooler SubSubsystem App has stopped working and was closed does mean?

  Spooler SubSystem App stopped working and was closed means.  I can't get my printer to print at all.  Not even a test page.

  Hello

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I got the error message "Spooler subsystem app stopped working and was closed".

  I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

  Hello

  You should probably check with Support from Adobe and their communities and Forums in case
  There are known problems.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ====================================

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• NVIDIA Driver Helper Service, Version 186.44 stopped working and was closed, where do I go to update this driver?

  NVIDIA Driver Helper Service, Version 186.44 stopped working and was closed, where do I go to update this driver?

  If your PC has a graphics update card driver nvidea come from Nvidea site webhttp://www.nvidia.co.uk/page/home.html

  If you have a laptop your laptop manufacturers site

• Trend Micro Internet Security has stopped working and was closed

  Original title: manages all components of Trend Micro, __Internet security. has stopped working and has been __closed. __

  Have you tried to disable my windows firewall and am always get error message (manages all components of Tred Micro Internet security has stopped working and was closed)

  Hello

  You should check with the support of TrendMicro.

  Frankly it seems to ask a lot of questions, so I remove it and replace it with other more
  compatible methods. To uninstall it, and then use the removal tool from
  TrendMicro.

  TrendMicro - removal tools
  http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  How can I uninstall my Trend Micro program removal tools fail?
  http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.