Deployed application not appearing in the task pane

Similar Questions

• Total memory of 4 GB newly installed does not appear in the Task Manager

  Total memory of 4 GB newly installed does not appear in the tab of the Task Manager performance. Only 3.3 GB appears. Is something wrong with the chopsticks of mem or mem from Vista 32 bit OS limit uses at this level. I have SP2.

  http://support.Microsoft.com/kb/929605

  "System memory shown in the system information dialog box in Windows Vista is less than expected if the 4 GB of RAM is installed.

  This behavior is the expected result of some hardware and software factors.

  Various devices in a typical computer require memory-mapped access. This is known as memory-mapped i/o (MMIO). For the MMIO space is available for 32-bit operating systems, the MMIO space must reside in the first 4 GB of address space.

  For example, if you have a video card that has 256 MB on-board memory, that memory must be mapped in the first 4 GB of address space. If 4 GB of system memory is already installed, the part of this address space must be reserved by the graphics memory mapping. Graphics memory mapping replaces part of the system memory. These conditions reduce the total amount of memory available to the OS System.

  The reduction in available system memory depends on the devices that are installed in the computer. However, to avoid potential driver compatibility issues, 32-bit versions of Windows Vista limit the total available memory to 3.12 GB. See the section 'More information' for more information on potential driver compatibility issues.

  If a computer has many features implemented, the available memory can be reduced to 3 GB or less. However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB.

  See you soon.

  Mick Murphy - Microsoft partner

• Images do not appear in the preview pane in Windows Explorer under certain conditions

  I use Win 7 Prof - under Display Options in Windows Explorer, I have pictures (not "icons"). The pane is open.

  If I open a folder in Windows Explorer by double clicking the folder icon on the desktop, the preview pane works very well, showing the content of the image.  However if I navigate to a folder by using the folder tree pane in the Explorer Win itself, the preview pane does not display the pictures when you click on the image file.

  However, this problem occurs only for photos, as there is no problem of visualization of the contents of other files, such as Word, Excel, PDF, etc.

  Thanks for your advice. However, as a result of someone of another tip, I restarted in safe mode, and then again in Normal mode and the problem disappeared.

  What was the problem, I don't know, but it can help someone else, if the race in the same thing.

  Kind regards.

• Purchase extension does not appear in the Photos pane in system preferences

  I bought a Photo of affinity on the App Store.  When I look in system Pref / Extensions nothing appears in the Photo.  The extension is installed.  How can I activate, while when I photograph, I can use and see affinity in the 'More' command dropdown in the Extensions?

  Try again by restarting and check to affinity in the Extensions of the Edit mode.

  

• Component does not appear in the browser pane

  Hi friend

  I am new to the ATG and using ATG10.1.2 with Eclipse. I have created a component via Eclipse and deployed on Jboss Server 5.1. I am getting below error while browsing the component in the component browser:

  one

  17:42:11, ERROR 362 [nucleusNamespace.] Failed to create the com.techm1.FirstCo class

  mponent1 for java.lang.ClassNotFoundEx/com/techm1/FirstComponent1 of configuration

  reception: BaseClassLoader@71172d81{vfszip:/C:/jbo com.techm1.FirstComponent1

  SS-EAP-5.1/JBoss-as/server/atgprodserver/deploy/TestApp5.ear/}

  java.lang.ClassNotFoundException: BaseClassLoade com.techm1.FirstComponent1

  r@71172d81{vfszip:/C:/JBoss-EAP-5.1/JBoss-as/server/atgprodserver/deploy/TestApp

  {5.ear /}

  at org.jboss.classloader.spi.base.BaseClassLoader.loadClass (BaseClassLoa

  der. Java:477)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)

  at atg.nucleus.PropertyConfiguration.loadClassUsingReplacement (PropertyC

  onfiguration. Java:461)

  at atg.nucleus.PropertyConfiguration.createNewInstance (PropertyConfigura

  tion. Java:740)

  at atg.nucleus.NucleusNameResolver.createNewInstance (NucleusNameResolver

  . Java:1572)

  at atg.nucleus.NucleusNameResolver.createFromName (NucleusNameResolver.ja

  will: 836)

  at atg.nucleus.NucleusNameResolver.createFromName (NucleusNameResolver.ja

  will: 666)

  at atg.nucleus.NucleusNameResolver.createFromName (NucleusNameResolver.ja

  will: 647)

  at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:)

  492)

  at atg.nucleus.Nucleus.resolveName(Nucleus.java:2620)

  at atg.nucleus.GenericService.resolveName(GenericService.java:378)

  at atg.nucleus.GenericService.resolveName(GenericService.java:430)

  at atg.nucleus.Nucleus.service(Nucleus.java:2923)

  at atg.nucleus.Nucleus.service(Nucleus.java:2867)

  to atg.servlet.pipeline.DispatcherPipelineServletImpl.service (Dispatcher

  PipelineServletImpl.java:253)

  at atg.servlet.pipeline.PipelineableServletImpl.passRequest (Pipelineable

  ServletImpl.java:157)

  Concerning

  Subodh

  Hello

  Please check your component and check the path class is mentioned correctly or not.

  Thank you

  P

• manipulation of file does not appear in the import pane

  The file management option is missing in the import dialog pane. MAC OS X

  The Management Committee of the files can be restored by right clicking on a panel header in the import dialog box right side and placing a check mark next to the file management

• some user names do not appear in the processes tab of task - windows, xp pro sp3 Manager

  Some user names do not appear in the Task Manager process tab.

  Process services Terminal Server is running, and I reset the Task Manager in the registry.

  Can someone please help?

  Thank you. André

  I have described at best in the original thread.

  However, I just uninstall a program that gives me a more graphic theme on my desk etc. - 7 Remix XP.  After it is uninstalled, all users appear in the Task Manager as it allows.  Obbviously Yes, I will leave out the culprit.

  Thanks for your help and your interest in my question.

  You can help me if you know something about the associations of files and program in win7 64 bit tohttp://social.answers.microsoft.com/Forums/en-US/w7programs/thread/71df3e94-7d33-42da-9e4f-6bba88e91273.

  Cordially, André

• Maple software does not appear on the screen

  Original title: GUI Application is not displayed in Windows 8

  Installed the 64-bit version of the software Maple Windows 8 64 bit on HP laptop.

  When the application is opened, it does not appear. The Task Manager indicates it is open and running.
  No known with Windows 8, or with the graphics driver compatibility issues.
  Maple requires Java, which is installed, too.
  I don't have an idea what can happen.

  After putting the system mode to boot, you must restart the system. Select the five services and start at the same time. You must restart the system after you enable the startup and services. Will take a couple of restart to find the defective application.

• Is it possible to prohibit the application icon is not appearing in the application selector option?

  I have an Application interface user defined as auto run at startup. Is it possible to prohibit the application icon is not appearing in the application selector option?

  An application that extends UiApplication will be displayed in the selector of the task.  An application that extends the Application will not be.  It is not a way to avoid a UiApplication appear here.

• LV TEN F5 SP1 does not appear in the components for deployment...

  Hello

  Just migrated my x 32 to x 64 TS2014 TS2013 LV2013 & apron & LV 2013 x 64. I'm now trying to build a new installer for deployment for my test stations, but LV RTE SP1 F5 does not appear in the components for deployment, even if it is properly used as adapter labview Teststand sequence editor... why?

  I can see RTE SP1 F3, but not F5...

  If please see attached picture to see my setup teststand (showing the labview adapter) and the list of parts available in the deployment utility.

  Thank you very much for the help.

  C.

  Hello

  Thank you for the information.

  As a temporary solution (as of 2014-12-04), I manually installed the SP1 LV F5 RTE 2013 on the test station.

  Here you can find the downloadable version:

  http://www.NI.com/download/LabVIEW-run-time-engine-2013-SP1/4539/en/

  Thank you and have a great day,

  C.

• APPLICATION will not appear on the main menu of the Simulator... Help, please

  Hello everyone,

  I came across this example code and tried to run on the Simulator 9900 and for some reason, the Simulator does not pick up the code. ..

  as the application does not appear on the main menu screen options... so I can not fire at all.

  someone knows why... ID really appriciate the help

  (Note: the simple code opens a new window when clicking on a button)

  Kind regards

  gezzy

  package mypackage;
  
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class FirstScreen extends MainScreen implements FieldChangeListener {
      ButtonField theButton;
  
      public FirstScreen() {
          add(new LabelField("First Screen"));
  
          theButton = new ButtonField("New Screen", ButtonField.CONSUME_CLICK);
  
          theButton.setChangeListener(this);
  
          add(theButton);
      }
  
      public void fieldChanged(Field field, int context) {
  
          if (field == theButton) {
          UiApplication.getUiApplication().pushScreen(new SecondScreen());
          }
  
      }
  
      public class SecondScreen extends MainScreen {
  
          public SecondScreen() {
              add(new LabelField("Second Screen"));
          }
      }
  }
  

  I think you are saying that the application icon will not be displayed on the Simulator? If so, this can help (I had the same problem and what I did):

  1 assuming you are using Eclipse, just run the program (it will be forfeit and display an icon to load for a few seconds on the Simulator).

  2. then go to file-> load BlackBerry Application or theme on the Simulator.

  3 navigate to your compiled COD of the file, then open it.

  4 after a loading icon, the application should appear in the menu.

  If this does not work, try to close the Simulator and do step 1.

  I hope this will help!

• see tasks does not appear below the image click on pick-up points

  the cursor from tasks view does not appear below the image, when the spot removal tool is selected. This is the case since the installation of Lightroom cc. How do I rectify this error?

  Press T to display the toolbar and it should appear.

• The update for Photoshop CC 2015 does not appear in the application of CC. What can I do?

  The update for Photoshop CC 2015 does not appear in the request of DC. What can I do? Already, I've uninstalled photoshop and returned to install to see if the application is awake and has given no sign of life, but nothing. Can someone help me? Thank you

  Hi Nexus 6,.

  I would say please try to download and install the update manually from the following link: Adobe Photoshop keep up-to-date

  Kind regards

  Tanuj

• After Effects does not appear in the creative Cloud Desktop application

  It took more than 10 minutes to get to this place just to ask a question... REALLY from ADOBE, you can make it easier for people to get help with your products? I'm in my 50th minutes installing a trial version of After effects on a PC. After the update and create my account cloud Adobe, After Effects is no where. I am really frustrated and can proceed to Final Cut Pro! Someone wants to tell me how to install After Effects. Ridiculous!

  After Effects does not appear in the creative application cloud if your system does not meet the requirements of System. After Effects - Adobe. This question was asking about two or three times a month from the creative cloud was announced. You can't blame Adobe that you didn't read the requirements before you sign up for creative cloud. Other applications may be compatible and you can be able to use CS6 filtering apps available as follows:

  

• Lightroom does not appear in the list of applications

  I'm new to creative cloud and I have a problem with Lightroom.

  I just started a monthly subscription with Photoshop and Lightroom. I was able to download Photoshop very well but Lightroom does not appear in the list of applications. I was able to download a trial version of Lightroom.

  Here is some information on my computer:

  2.26 GHz Intel Core 2 Duo processor

  4 GB 1067 MHz DDR3 memory

  NVIDIA GeForce 9400 M 256 MB graphics card

  Software OS X 10.9.2 (13 C 64)

  imawildgirlaz1 wrote:

  When I open it, I get a window asking me to put the licensed software or continue my 30 day trial.

  What happens when you click on 'license '? If you are prompted for your user name and password to Adobe, just go ahead and enter that and you're all set.

  If asked for a serial number, it is still something the surplus from your previous installation. Try to log out and back in the desktop CC application. If it still does not respond, you may need to use the CC cleaning tool to get rid of the remaining files.