Deployment of the CA certificate

Similar Questions

• Replacement of the SSL certificate in vCenter Server Heartbeat with a new certificate

  Realized the SSL certificates on my vsphere vCenter Server 5.5 environment change, but now I'm looking to deploy vmware vCenter Server HeartBeat service, but I have the following doubts.

  1. it is necessary to perform the exchange of currently used SSL certificate in my environment. ()http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2013041( )

  KB article talking about amendment of the certificate of a vCenter Server Heartbeat deployed... If the vCSHB are not deployed and yet, you don't need to worry... just go ahead with the installation and the new vCenter server certificate will be recognized by vCSHB.

• What happens IF we replace the default certificates for vCenter 5.1?

  Does anyone have specific vmware documents indicating what happens IF we replace the default certificates for vCenter 5.1 SSO, inventory, Web Client etc... services?

  I found this below at page 19 of https://www.vmware.com/files/pdf/products/vCenter/VMware-vCenter-Server-Single-Sign-On.pdf

  Certificates update

  When you install the vCenter Single Sign-On, each component that registers with it - including

  vCenter Single Sign-On himself - uses SSL to communicate between components and saved solutions.

  By default, SSL certificates are generated automatically by VMware installation and upgrade process

  and are sufficient for the operational security for most VMware customers.

  Some clients prefer to use their own self-signed or purchased SSL certificates. A tool has been developed to

  help the insertion of these certificates after vCenter Server installation. Because of the additional knowledge

  required to create and install self-signed certificates, we recommend that you review the following knowledge of VMware

  basis of articles:

  "Deployment and using the tool to automate SSL certificate.

  (VMware 2041600 knowledge base article)

  "Generation of certificates for use with the VMware Certificate SSL automation tool"

  (VMware 2044696 knowledge base article)

  In 10 years your vCenter starts (because of expiry of the certificate).

  Your users will see pesky warnings of SSL certificate when connecting components.

  Apart from that all traffic is always secure and encrypted with certificates by default, you have simply a chain of trust for them.

• How can I set up email when the field on the SSL certificate does not match?

  I am a customer of Dreamhost and don't know if our situation is unique or not, but both smtp and imap are "mail.example.com" even if the SSL certificate belongs to ' *. DreamHost.com'.

  I was not able to set up the email on my flame app because I get the following error:

  > Could not establish a connection with "mail.example.com". There may be a problem with your network or server.

  I think the problem is the lag of domain name, but I can't find a way to accept the certificate.

  Hello!

  According to the official DreamHost wiki site , you can try this (cut-and-pasted from the page). If it doesn't work, there are still other options available on the page.

  To connect to the mail server using the name of the server dreamhost.com instead of messagerie.votre_domaine.fr.

  Use the following steps to determine the name of the server to use:

     In the DreamHost Control Panel
     Click "Account Status" in the upper right hand corner
     Look for the "Your Email Culster:" at the bottom of the list.
     Find your cluster in the table below.
     Use the server name for the incoming server in your mail program.
  

  Name of Server Cluster e-mail
  homiemail-sub3 sub3.mail.dreamhost.com
  homiemail-sub4 sub4.mail.dreamhost.com
  homiemail-sub5 sub5.mail.dreamhost.com
  homiemail-master homie.mail.dreamhost.com

• Firefox shows "the peer certificate has an invalid signature." ISMA shows "could not trust this certificate for unknown reasons.

  With the help of a PKI on site of 2 levels. Root CA offline (Standalone Windows 2008 R2, Enterprise Edition) and Isma online for delivery of certificates (Domain-Joined, issuing CA)

  ROOTCA certificate installed in the store and the approved display (PKCS #1 SHA-256 with RSA algorithm encryption and uses a signature SHA2)

  ISSUINGCA certificate installed in the store and display "couldn't trust for unknown reasons" has also SHA2 signature with the RSASSA-PSS algorithm

  Certificate issued is for a Web Server front end Lync and when it tries to load the secure web connection. I get the message "the peer certificate has an invalid signature."

  I completely uninstalled and reinstalled Firefox. Removed and added certificates ROOT and ISMA. Note: No problem when using the same certificates in Internet Explorer 8, 9 or 10 on the same system. Lync client also uses the same certificates, no problem. Only when access to the Web Services of Lync from Firefox.
  Question: Firefox NSS #11 internal Module PCKS supports RSASSA - PSS SHA-256 with different hashes? How can I solve this further?

  I finally found the problem. The ROOT CA has the following registry key configuration when cert Isma was published:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\CertSvc\Configuration\IssuingCA\CSP\AlternateSignatureAlgorithm = 1

  This CA cause ROOT to issue the cert with a signature that is encrypted with the algorithm RSASSA-PSS (1.2.840.113549.1.1.10).

  This signature replacement algorithm no is apparently not supported for use with Firefox 27.0

  I changed the registry value on the ROOT CA to a value of 0. Renewed the cert IssuingCA (using the same private key) which is now on display with sha256RSA encryption. I have republished all my default web certificates now using this new broadcast chain CA without problem.

• The site certificate is invalid and not allowed to go to him.

  I am trying to get a site (in this case my employers training site) and Fire Fox always tells me that I can't because
  "< site > uses an invalid security certificate.

  The certificate is not trusted because the issuer certificate is unknown.

  (Error code: sec_error_unknown_issuer) »

  This isn't the only time where I saw fire fox do this with the sites that I know for a fact are valid, but this one takes the cake because it prevents me from doing my work. Honestly I don't care but it even does give me the option "I understand the risks". Why the hell he won't give me this option? It does in other cases but not in this one. Why? The most annoying is that it gives me no problems with OTHER parts of the same site, just a part I need to do my training. I looked online and the advice is to get the certificate (I not give me that option, only the option of "get me out of here") or remove the file cert8.db, what I did without result.

  Is there a way to force firefox to let me go to this site I know very well is safe?

  As an aside, I know that the issue is not with the site that I went through it with chrome and explore, but it works best with firefox usually.

  This happens usually if the servers are not send the complete certificate chain (i.e. not all the intermediate certificate are send). Sometimes, it is possible to install the intermediate certificate via other sources (Firefox stores automatically if you visit a Web site that sends).

  If "I understand the risks" is missing, this page can be opened in a (i) frame and in this case, try the shortcut menu and use "Frame this: Open image in New Tab".

• Why, yesterday evening, I receive the message that the security certificate is not valid on the sites that I use all the time, as my account hotmail, facebook, paypal, etc.?

  I even got this message when I tried to post my question! It is said that Firefox can not verify a connection with mozilla, or any website, I am visiting, because the security certificate is not valid. It gives even the dates to which the certificate will be valid, and the date indicates that it is valid. So frustrating! I "replace" Firefox every time.

  The date / time set correctly in Windows Vista?

• I can not connect to a web site using my iPad. Message says required certificate required. No problem using my laptop. How can I get the required certificate on my iPad?

  EError message say site has no certificate, no problems until what I put at the operating system level. How can I get the required certificate on my iPad?

  Certificates are provided by the site. So if the site has a certificate expired or outdated, it may not work. In your case, the certificate No is probably not updated to work with the new software of Safari on your iPad,

  If all other Web sites running on the iPad except this one, I'll try to contact the manufacturer Web site. If a single Web site does not work, there probably nothing wrong with the iPad. In addition, certificates work differently on an iOS, as opposed to an OSX computer device.

  The only thing that can help on the end of your iPad is to delete the data from the Web site for this particular site. It might be the old data storage a before you update. To do this, go to settings > Safari > advanced > data Web site > Edit > remove data from the Web site.

  If you want to erase all data from the Web site, you can go to settings > Safari > clear the history and data from the Web site. Which will remove saved passwords and all data of the Web site, so don't do that if you know your password.

  Good luck

• How to get the date of deployment for the RT code?

  I'm using LabVIEW 8.5 and MAX 4.4.1f0 and cFP-2110. I want back the date of the deployment. Is it possible to recover the date of deployment for the RT code?

  Thank you

  Martine

  Hi John,.

  You must be able to FTP into your PSC 2110 from a Windows Explorer window and check the date of 'Change' of the startup.rtexe/or-rt/startup folder.

  Aaron P

  National Instruments

  Technical sales engineer

  http://www.NI.com/support

• Not able to access the PV which are deployed in the RT using the EPICS IO Server

  Hi, we have NIPXIe 8133 and 1 windows vista (32-bit) PC and I installed LabVIEW 2012 (32 bit) and the required modules. I also have another PC (6.3 Santiago RHEL) based on RedHat Linux and all 3 PCs are connected to the same network. I want to develop an application in which I want to deploy some variables of process in RT and want to access this PVs in Red Hat Linux PC. In order to develop this application, I do RT as a server of EPICS and Red Hat Linux PC as a Client of EPICS. I have deployed some variables of process using Server EPICS in RT now I want to access the value of the PVs in Red hat Linux PC and in this EPIC PC base is already installed but I am not able access PVs that are deployed in RT if you please help me solve this problem. Best regards, Ishan

  I have not assigned by default in one of my system and bridge that was the only problem in my system. Once I have given Defaullt bridge in all systems, I can access all of the HP that are deployed in the RT other 2 machines connected in network.

• Insider source subscription. Could not retrieve the client certificate

  Hi all

  I created subscription source initiated between two Windows 2008 R2.

  The source (client) cannot connect to the server. Logs on the client:

  Send the request for operation to the destination machine enumeration and the server.corp.domain.com:5986 port

  Authenticate the user using the Client certificate mechanism

  User authentication failed. The credentials did not work.

  Has received the answer of the layer network; status: 401 (HTTP_STATUS_DENIED)

  WSMan enumeration operation failed, error code 5

  Opens a session on the server.

  Sending HTTP error to the client after a failure of transportation.
  The HTTP status code is 503
  The error code is 995

  Could not retrieve the client certificate

  Send the HTTP 401 response to the client and disconnect the connection after sending the answer

  The user authorization failed with error 5Authorizing the user

  Authentication using client certificate with the client.corp.domain.com object is successfully

  How to fix the error "unable to retrieve the client certificate?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The security certificate presented by this website has expired or is not yet valid.

  I get error for owa, the security certificate presented by this website has expired or is not yet valid.

  I am running SBS 2008 server with exchange server 2007
  How can I renew a certificate expired for owa

  Hi Joneser,

  Please help me answer these questions to understand the application better.

  You have any questions using the calendar app in Windows 8?

  What operating system do you use?

  What exactly is the problem with the calendar?

  You get an error?

  Answer us if you need help with Windows, and we will be happy to help.

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• Certificate error "the name on the security certificate is invalid or does not match the site name.

  When my computer after starting the antivirus and Skype loaded,.

  I recently started to get warning of security box appear. The attachments show you what I see.

  I am told "the name on the security certificate is invalid or does not match the name of the site"

  Whether I click Yes to "do you want to proceed", nothing happens.

  How to make this security alert disappear from the start-up procedure?

  Thanks for your advice

  Marty783

  

  Thank you PML

  Problem is now solved.
  Was a corrupted version of IE6, which, when updated to IE8, fixed the problem.

• Error message: "the security certificate has expired or not valid" when signing into emails

  original title: it is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  It is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  Chances are that your system clock is bad - check your regional settings in the control panel and make sure that your region, time, date, and year are correctly configured.