Designer of the noob - best way to start?

Similar Questions

• Need to best way to start learning about Oracle 11 g DBA

  Hi.This is Dumond.
  I want to learn Oracle 11 g DBA. I downloaded all of the software and Documentation 11g R2 Orcl. Now. I want to start learning DBA. Can someone suggest me the best way to start learning DBA?
  Please suggest me good books for Architecture Oracle and SQL...

  Hello

  If you are good in 10g then just start new book of 11g function.
  Else read the admin guide and the whole concept of 11g.

  I always refer to the oracle documentation, and a small test DB intended to test.

  Read and practice :)

  Kind regards
  Rakesh jayappa

  Published by: Rakesh jayappa on September 21, 2010 03:09

  Published by: Rakesh jayappa on September 21, 2010 03:10

• cRIO: best way to start/run a VI running on the RT.vi of the host.vi

  Hi all

  I recently (3 weeks) he started to use with Labview/cRIO. I think I have the concept of the cRIO down, but I'm fighting on what seems to be a simple communication in Labview. Here's my problem:

  I have a cRIO 9074 with x 1 NI 9234 (4 analog input channels) and x 3 modules NI 9512 (motor controller). I am running in hybrid mode. My RT.vi control all movements of engine (scan mode) and also the FPGA FIFO beginning/read it. My Host.vi is in fact a UI and did some post processing on the data that I acquire by my NI 9234. My issue is with how to begin the RT.vi of the Host.vi. Just use the "VI reference.vi open? I tried but I do not think I do it properly, because what settings should I get for this? Can I configure it with the IP address of the RT? Also, for the path of the file, where are the screws on the RT?

  Thank you!

  Troy

  Note: The final product must be converted into a .exe. If the implementing method is to open/run the RT.vi automatically.

  Normally you compile the application of RT, deploy and set it as the startup application.  In this way, it will be saved on the internal flash of the cRIO drive and will automatically load when you start the cRIO.  What is an option for you?

• d011wm flow 11: best way to update windows 10? This disc is the best way to start froom

  After minor driver installation would not work. Intel, Realtek, recovery manager has been altered and would not work.

  chizilla313

  Hello;
  
  Let me welcome you on the HP forums!
  
  Some people have worked a long and complicated way to make the initial win 10 improvement by using additional storage media to contain the update files.  The existing 32 GB SSD is simply too small to hold the existing operating system and the Win10 update files.

  But then they discovered that they could not do the cumulative updates (like the recent anniversary update) because their methof of point to other storage media has not worked!

  Sorry for the bad news, but there is really no good way to update the series flow 11.

  You are better off leaving the original OS.

• Wow, I am overwhelmed with Eloqua and Topliners.  What is the best way to start?

  
  Please give me feedback in order to learn and use my time effectively in everything I do in Topliners.

  Thank you very much I like the idea of 30 minutes.

• Best way to start developing for Blackberry 10?

  Hello

  I'm a mobile developer works on iOS, Android, and Blackberry platforms.

  Our society has decided to finally support the Blackberry 10 platform. I've been so busy to develop our latest ideas on iOS I really had time to look into the development of BB10, so far.

  I did some research on the forums and came across this post:

  http://supportforums.BlackBerry.com/T5/Java-development/I-want-to-start-development-for-BlackBerry-1...

  Which mentions 2 ways that you can develop for BB10, Aboriginal and waterfalls.

  Now, when it comes to development of BB, I come from the crowd of java. I would like to know the advantages and disadvantages of native development and Cascades, what IDEs or SDK is required, what knowledge is necessary to begin (ex: C++) etc...

  If this question has already been answered, you have my apologies, please provide a link.

  Thank you!

  "Native" is just C/C++ without using Qt and infrastructure of Cascades user interface on top of it. Unless you plan build your user interface ENTIRELY in OpenGL, you probably want to waterfalls. And even in this case, you can draw OpenGL cascading with the ForeignWindowControl content.

  Anyway, if you come from the point of view of iOS, you might find this useful: https://developer.blackberry.com/cascades/documentation/getting_started/porting/index.html

  Since you are familiar with our Java on BB7 platform, you can also check the Java BlackBerry series BlackBerry 10 Cascades of blog on our developer blog posts. The first is here: http://devblog.blackberry.com/2013/01/port-java-to-cascades-part-1/and part 13 just came out today.

  Waterfalls more find info started here: https://developer.blackberry.com/cascades/documentation/getting_started/index.html

  And if you are interested in other platforms, you can go here: https://developer.blackberry.com/develop/platform_choice/index.html

• In regards to the final quality, what is the VERY BEST way output an InDesign to Photoshop file?

  I create a file for an online ad in InDesign... because I'm primarily a print designer, because it includes text and images, especially because this is the program I work faster.  I create the final size required for advertising.  All done, all approved. Final online publication requires a jpg file.

  So... I can export of ID as a jpg. Or, I can copy all and paste it in a new PS document, then output jpg for the web and devices. Or, I can save/export as eps/PDF and open THIS file in PS, , then the jpg for the web and output devices. There's probably more. And of course, I could just create in PS if I have TO. What SHOULD I do wind up with the clearer jpg to the correct file size?

  I think maybe this post in the PS forum, too, and see if everyone agrees on a method. Thank you, all.

  Raster InDesign export functions are questioned regularly here in the forums, so even if it's something I have never, I have a distinct feeling that it can be quite problematic.

  I would say the InDesign > export > PDF / open a PDF file in Photoshop > save for Web gives you the most control over every step of the process.

• Best way to start Critical Patch Update

  Dear all
  
  We intend to apply Critical Patch Update July 2011 on our environment to live (PROD)
  
  DB version: 11.1.0.7
  The app release: R12.1.1
  SHARED APPL_TOP: Yes
  CFP: Yes
  Load Balancer software/hardware: software
  DMZ server: Yes
  
  I come from versions of Oracle E-Business Suite 11i and 12 Critical Patch Update knowledge Document (July 2011) (Doc ID 1315202.1()
  
  It's in a good amount of time and a lot of questions have arisen
  
  
  (1) is it necessary to apply the CPU for Oracle E - Business Suite, when your company works well
  
  (2) in the doc of metalink above, I came across middle ware to oracle fusion, please correct me it is part of stack for the appl tech or tech appl also ask what is the difference between Oracle Fusion Middleware and Oracle Apps Tech stack
  
  (3) Will CPU Patch boost performance (such as purging log files)
  
  
  Order enforcement:
  
  1st Db-
  (a) how do?
  (b) I have never applied a patch of db up to now: (...)
  (c) what is the time to apply the patch
  
  
  2nd apps - how to apply?
  (1) is it the same as a traditional using adpatch utility
  (2) this will create any INVALID object
  
  
  
  Please shed some light on what I have many questions about CPU kindly suggest me how to initiate
  
  
  -Chetan

  Salvation;

  For us, we apply patch database CPU on our system. It depends on which means that you also can apply someother CPU patch for your system.

  We intend to apply Critical Patch Update July 2011 on our environment to live (PROD)

  Why July 2011? No particular reason?

  Already October 2011 has been published which is also the cover of July 2011

  I come from versions of Oracle E-Business Suite 11i and 12 Critical Patch Update knowledge Document (July 2011) (Doc ID 1315202.1)

  See also:
  http://www.Oracle.com/technetwork/topics/security/cpuoct2011-330135.html

  Part:
  Oracle E-Business Suite Release 12, versions 12.0.6, 12.1.2 12.1.3 and Oracle Database 11g Release 1, version 11.1.0.7

  (1) is it necessary to apply the CPU for Oracle E - Business Suite, when your company works well

  Yes its highly recommended

  (2) in the doc of metalink above, I came across middle ware to oracle fusion, please correct me it is part of stack for the appl tech or tech appl also ask what is the difference between Oracle Fusion Middleware and Oracle Apps Tech stack

  Use below links for appstier

  See also:
  http://www.Oracle.com/technetwork/topics/security/cpuoct2011-330135.html

  Part:
  Oracle E-Business Suite Release 12, versions 12.0.6, 12.1.2 12.1.3 and Oracle Database 11g Release 1, version 11.1.0.7

  (3) Will CPU Patch boost performance (such as purging log files)

  Check know part question

  Order enforcement:

  1st Db-
  (a) how do?
  (b) I have never applied a patch of db up to now: (...)
  (c) what is the time to apply the patch

  Check Readme part of patch don't forget that you have valid oracle_home and backup of data file
  >

  2nd apps - how to apply?
  (1) is it the same as a traditional using adpatch utility
  (2) this will create any INVALID object

  Check Readme part of patch don't forget that you have valid oracle_home and backup of data file

  respect of
  HELIOS

• What is the best way to import and export images from the 5 d Mark II?

  Hello

  I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

  My questions:

  (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

  (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

  (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

  I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

  > used first lately

  A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

  1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

  - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

  2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

  1080 p http://forums.adobe.com/thread/995191 some work, some are not

  In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

  In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

  And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

• What is the best way to protect against keyloggers, monitoring tools, remote access, or whatever it is that allows someone else to access my laptop? ___

  History:

  Recently, I've had my laptop taken in charge and had to spend the money to have everything removed and reinstalled XP. I don't want it to happen again.
  

  Currently, I installed the following:

  • Ad-Aware
  • SUPERAntiSpyware
  • Malwarebytes Anti-Malware
  • Spybot - Search & destroy
  • Command AntiVirus
  • Sygate Personal Firewall

  The question:

  I'm still not convinced that I am protected. Most likely because I'm not.
  An Ad-Aware scan found a tool called "Win32.Monitor.SpyBuddy".
  a few days only after reinstalling XP. There are probably more.
  I don't know that he even went. It just says: its been "Quarantined" and there is no option to remove it.

  Basically, I just want to know that my computer is protected from keyloggers, monitoring, & people tools remote access to my laptop. And I don't want to spend more money.
  How to achieve this?  An answer would be GREATLY appreciated.

  Do not try to rationalize anything. Just tell you what I know and I hope that I will find the absolute best way to keep keyloggers, tools of surveillance, & virus off my laptop in the process.

  You have been very helpful and I thank you.

• Best way to upgrade 9 machines to monthly subscription?

  I have 9 machines (3 PC and 6 Mac) upgrade to monthly subscriptions - 8 of them are already on CS5... What is the best way to start this process?

  Hi Emily,.

  To my knowledge, "Creative Cloud for teams" is appropriate for you. Also, if you use the product for a year then it is better if you buy an annual subscription in which only the commitment is for one year, but you will pay monthly-wise. Check this link for more details about Creative Cloud for teams below:

  http://www.Adobe.com/products/creativecloud/FAQ.html#CCM-teams

  Kind regards

  Fatiha

• INTERFACE design - what is the best way to allow the user to define a kind of infusion at various times (non-periodic)?

  I want to allow the user to specify a curve like this:

  

  Such as some under - VI shows the A2 value when a variable of time is between R1, A1 when the time variable is between A2 and A3 when time is in the range A3.

  My design looks like this:

  

  With the error checking that looks like this:

  My question is, is the approach of the table according to optimal? Otherwise, how could combat this?

  I think I can summarize the conversation on this point as a response to the original question (what is the best way...) -to start writing code, to think about what you want to accomplish and write it down (otherwise known as 'Write the first Documentation').  One of the points of a good User Interface is that it is not allow users to "stupid mistakes" - it leads the user "by hand", limiting the entries to the "legal values" and demanding that the entries be made logically.

  If you were going to have a list of Infusions to enter, it is therefore logical to decide or not to enter into time intervals (which are always > 0) or order the times (which, logically) are still growing.  You can (and should) decide that you (or you may have a control that allows the user decide, but maybe it's too flexible) and then apply your "rules".

  Let's say you've decided on "Intervals" (which seems to me to be more User Friendly).  After the user has entered the intervals (and you've provided a nice plot of perfusion vs. time), pouvez allow you the user to an interval of 'split', 'Delete' an interval, or "Edit the Infusion" interval, or you can decide to have a choice more simple "accept or start again" - If you have only a few intervals, the last would be the simplest (and therefore best) design choice.

  Spend more time thinking before coding usually pays Big dividends!

  (Speaking of sad experience) Bob Schor

• Best way to deal with pictures from the start? (Bridge CS5 and iPhoto)

  Hi all

  I am just learning the strings of all the suite CS5 and began to add keywords etc in bridge, when I realized that I couldn't access the files in my iPhoto library ('09). I read a few threads on this topic, but have not really found a consensus on how to deal with it.

  I think I'm in a good position to get things right from the start, because I have no tags or sides etc. in my configuration of iPhoto (and only add keywords for the few photos that weren't in my iPhoto library), and wonder what you think is the best way to sort photos given I intend to use them in web design etc. and all the parts of my suite CS5.

  If the photos in iPhoto is the best what is the best way to do it? I have read suggestions do a right-click on the library and click "Show content" - or something like cela, but that does not come up as an option when I right click my iPhoto in Bridge library. Thanks a lot for your help!

  Please let me know if there is any info I could give you that could be useful in order to understand this one.

  Best,

  Mara

  PS: for the temporary folder, I use a name like to-do Images

  Remember once the keywords are used is not just the manipulation/image adjustments which are important metadata but also robust observation with integrity

• What is the best way to download icons I created on illustrator on a file photoshop of a Web site design?

  I currently trying to design a website on Photoshop. I designed a few icons for the Web site using Illustrator. What is the best way to download these icons on the photoshop file and keep them looking for crisp and high quality? I tried a number of ways, but all seem to come out pixelated.

  What you need to do is to ensure that you create the icons the PPIS and the Photoshop document Illustrator and true to size. If you have created the icons tell with 300ppi, but are in pixels it do not have the same properties that the Web site that you create if that was put in place as 72 dpi and so will distort.

  Once you have mastered that you are better (if you think that there may be changes to the icons later down the line) to create each icon .ai files and place them intt the Photoshop document, and then if you make changes to the source .ai file that it will update in the design of Web sites you.

  If you see no icons change then you can always just copy and paste directly from Illustrator, Photoshop and make changes on the fly, ensuring that keep you it as a smart object.

• I want to rename and move files from a shoot 5 d. I would like to use the functionality of the increment to count, but since I have to get out of each file to the following file, it starts again at 1. What is the best way to do it?

  I want to rename and move files from a shoot 5 d on a new drive. I would like to use the functionality of the increment to count, but since I have to get out of each file to the following file, it starts again at 1. What is the best way to do it?

  HI -.

  As a prelude to 2014.0, we have added a feature allowing you to choose what number to start the increment of.  Look in the section ingest Rename dialog and change your preset. When you click the button, you should see the option "Custom Auto Increment". This will allow you to choose what number to start on.  We've also added a few newspapers to try to remember where let prelude last successfully interfere the operation by using this option. So, in theory, to remember the number for you. But if it isn't (maybe you want multiple kickoff ingested at the same time) you can always manually set the number to start with.

  Check that out and let me know how it works for you.

  Kind regards

  Michael