Determine how the CFC function was called?

I have a CFC that can use CFLOCATION under certain conditions. The problem is this function can be called remotely and it will crumble if CFLOCATION is used. Is there a way I can say within the service if it was called remotely or locally?

Oh what I needed thank you.

Tags: ColdFusion

Similar Questions

When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

I have a critical application in real time, in which I use a piece of DLL function developed in C++. It is ok? Make sure any senior developer?

Thank you in advance.

The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

Manual large editions with sensitive html setting. Is there a way to determine how the entries appear in the table of contents?

I publish major textbooks with sensitive html setting. Is there a way to determine how the entries appear in the table of contents? If I publish a small section of the manual then 2nd level entries appear as eruptions under the chapter name, but if I publish the manual in its entirety then level 2 headings are not at all. I would like them to appear as the eruptions in the table of contents, but I need to publish the manual as a whole in order to keep the cross references. Any help will be greatly appreciated!

I think that this would make clearer - and it would skip and tables of contents of books under.

Despite indicating to the path, still have manually pointing DLL every time LV works using the library function node call

I use the node of the library function call in LV 8.6. I checked the path to specify the box diagram and made directly in the DLL file that I use. Whenever I have started with Labview, I have to go to the diagram and physically find the DLL in one of my calls to make it work properly. Once I have do this everything seems to work as expected. Anyone else see this issue? Any suggestion would be appreciated.

Thank you

Steckman wrote:

I use the node of the library function call in LV 8.6. I checked the path to specify the box diagram and made directly in the DLL file that I use. Whenever I have started with Labview, I have to go to the diagram and physically find the DLL in one of my calls to make it work properly. Once I have do this everything seems to work as expected. Anyone else see this issue? Any suggestion would be appreciated.

Thank you

Probably that DLL does not depend on other DLLs that reside in the same directory you point to in the configuration node dialog box call library. What is happening is this:

Without going into this directory:

LabVIEW applications Windows to load the DLL, Windows detects that it needs to load other DLLs and can not find in its standard search sites:

(1) already loaded into memory

(2) in the application directory (where the exe that began the current process resides in the LabVIEW IDE would be where is LabVIEW.exe)

(3) in the system directory

(4) in the Windows directory

(5) any directory in the PATH environment variable contains

(6) in the directory 'active '.

Because Windows cannot find a person to load DLL he abandoned the main DLL loading and returns an error to LabVIEW.

Now, you go to the configuration dialog box and point to the DLL. The dialog box browse file in LabVIEW uses the standard OS dialog box and this dialog box has the behavior obnoxious always update the "current" directory in the directory where a file got selected in. LabVIEW sees now that the path has "changed" and asks again to load the DLL. Yet once, Windows detects that it needs to load other DLLs too for this DLL but this time going over the search order, it will actually hit the DLL in the same directory and that's all fine.

It is certainly NOT a problem of LabVIEW. LabVIEW does not and should not really need to know that a DLL needs other DLL loaded and more importantly should never try to think he can do better than Windows, it probably could, but is simply not his task of dependency DLL loading.

It is your responsibility as a programmer and user of this DLL to know its dependencie, and if you did not write the DLL, to hit the original on his head programmer, if it has not documented these dependencies and make sure that these dependencies are actually properly resolved for Windows placing them in one of the places mentioned above

((2) is generally the best location for applications applications because it will not pollute the Windows directory or the user of the application system and 5) is the best for the development machine as you can add a directory to your PATH environment variable where you put the dll you need to develop a specific application.

Rolf Kalbermatter

How the two function return values

Dear all,
Please explain, how the two values of function return?
give a simple example.

OK, a few examples...

First example, using a type of structured on the database object:

SQL > create or replace type tMyValues as an object (yr number, number, number of dy mn)
2.

Type of creation.

SQL > create or replace function getMyValues return tMyValues is
2 number of y: = extraction (year sysdate);
number of 3 m: = extraction (sysdate months);
number of 4 d: = extract (day of sysdate);
5. start
6 return new tMyValues(y,m,d);
7 end;
8.

The function is created.

SQL > set serverout on

SQL > declare
2 myValues tMyValues;
3. start
4 myValues: = getMyValues();
5 dbms_output.put_line (' year: ' | myValues.yr);
6 dbms_output.put_line (' month: ' | myValues.mn);
7 dbms_output.put_line (' date: ' | myValues.dy);
8 end;
9.
Year: 2015
Month: 4
Day: 1

PL/SQL procedure successfully completed.

Second example, using an associative array within PL/SQL:

SQL > set serverout on
SQL > declare
2 type tMyValues is table of the index number to varchar2 (10);
3 myValues tMyValues;
4
5 function getMyValues return tMyValues is
6 retValues tMyValues;
7. start
8 retValues ('Year'): = extraction (year sysdate);
9 retValues ('Month'): = extraction (sysdate months);
10 retValues ('Day'): = extract (day of sysdate);
11 return retValues;
12 end;
13. begin
14 myValues: = getMyValues();
15 dbms_output.put_line (' year: ' | myValues ('Year'));
16 dbms_output.put_line (' month: ' | myValues ('Month'));
17 dbms_output.put_line (' date: ' | myValues ('Day'));
18 end;
19.
Year: 2015
Month: 4
Day: 1

PL/SQL procedure successfully completed.

For the pipeline functions, see the example I wrote on the link provided by ReemaPuri (answer No. 3) that I don't need to re - write what I did before.

How the get function is available or not on the loaded swf file

I have 100 swf file in one of my projects. And there is a common feature in some of the SWFs. All these files are loadded in the file main.swf. Here's my Question, "If have the common function is the swf file that is loaded, int how to trigger this funciton of the main.swf.

Quite simply,.
```
            if(movieclip.test){
                movieclip.test();
            }
```
('movieclip' is the loaded SWF file and "test()" is the function)

How the photoshop script can call an applescript script

I realize, maybe it's a bit of a messy way around it, but I need to get the photoshop script to call an applescript script. Basically so that I can have it become a menu item in photoshop.
Is - this show applescript can in the same way photoshop script?
If this isn't the case, I thought I could get either photoshop script to call the applescript or even more messy, I could use Photoshop to run a Terminal command to call the applescript.
All thoughts
Matt

For those who come through it

Save your applescript as an application, and then you can use

App.System ("' open ' / path/to/script_as_an_app.app'" ");

then everything works

The compiler bug? Var statement above the postcedes function being called external execution function definition

Use Flash CS5 (AIR and, although this does not seem that it would be AIR bound) in Win XP 64

I have a MovieClip symbol in my library with the identifier 'Puzzle10Piece10' with the following actionscript code attached to frame 1 of the single layer with the following actionscript code:
Import 12345678910111213import;
import flash.display.Sprite;
var bmpSprite:Sprite = new Sprite();
addChild (bmpSprite);
trace ("*" + bmpSprite + "*");
function addBMP(b:Bitmap):void
{
trace ("=" + bmpSprite + "=");
BMP = b;
bmpSprite.addChild (b);
}
I have the following text in a class AS file:
If (name is "GoalCard")
{
var p10:Puzzle10Piece10 = new Puzzle10Piece10();
trace (new Bitmap (p.getImages (). Hallway [1]));
variableArea.addChild (p10);
P10.addBMP (Bitmap (p.getImages (again). Hallway [1]));
}
Produces the following output:
CLASS: PictureTools FUNCTION getImages() return [[object Object]]
[object Bitmap]
CLASS: PictureTools FUNCTION getImages() return [[object Object]]
========== null ===========
Bland (out) lightbox FEATURE
[object Sprite] *.
The "trace (new Bitmap (...". "is only to show that I am sending a valid bitmap object to the function, I'll call you.
This goes against my understanding of the pre-compiler and code execution order. In my way of thinking, any creation of reference and memory related distribution is performed when the object is instantiated, and indeed that allocation, unlike C does not depend on code order (statement before use), although it is a command that can reach even the C pre-compiler. If I understand correctly the compiler in Flash at all, it's not even a question of "order of the code"... the symbol is pre-compiled such that it exists... so that it can be instantiated, the variable would exist before the function would be "available" to be called internally or externally.
Is my way of thinking to the coast, or is this a bug?

at least since flash mx.

Upgrade now display is different, restore the missing and the system functions was useless...

So my computer was installing auto updates and I accidentally closed. Next time on all the icons were huge and overall display of "old." Other random changes: sleep and Hibernate are currently not available for me, when I closed the Explorer but windows open and put the mouse on the icon Explorer shows me written page name whereas before he showed me a small version of the actual page... Really sucks and help would be appreciated...

johnleer,
According the description, it sounds as if your display driver may have been corrupted and has returned to a default value. I suggest you make sure you have the latest display driver on the site of hardware manufacturers.

If you encounter any problems with Windows Update, please post with the information requested here: what to post in the Windows Update forum
Start with the troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

Clean boot your PC, and then run Windows Update.

Reset the Windows Update components

Perform operations of KB883825

Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

How to reset a timer each time the function is called?

Hello
I have my code like below. The main function is called whenever the event occurs. The event occurs when I created a timer which occupies 10 seconds for display purposes.
Once the Main() is called, a message appears and after 10 seconds, the message disappears.
The problem I had met with this code is that the message does not last for 10 seconds when the Main() is called consecutively. For example; when its name for the second time within 10 seconds, the display will show for 6 seconds and maintain the reduction.
Can someone help me with this problem and tell me what to do to reset the timer each time the Main() is called. I also used FeatureState_Timer.reset (), but it did not work.
/ * Declarations of global variables * /.
public var FeatureState_Timer : timer = new Timer (10000);
/ * Global function * /.
function Feature_Timer_Function(timerEvent:TimerEvent): void
{
Message.Visible = false;
Feature_Timer. stop();
}
function Main(event:Event):void
{
FeatureState_Timer .addEventListener (TimerEvent.TIMER, Feature_Timer_Function);
FeatureState_Timer . Start();
Message.Visible = true;
}
Thank you!!

Try to reset the timer first:

function Main(event:Event):void

{

FeatureState_Timer . Reset();

FeatureState_Timer.start ();

Message.Visible = true;

}

If this does not work, use the following code:

function Main(event:Event):void

{

FeatureState_Timer = new Timer (10000);

FeatureState_Timer.addEventListener (TimerEvent.TIMER, Feature_Timer_Function);

FeatureState_Timer.start ();

Message.Visible = true;

}

Economy through plugins compatible player - a function not implemented or obsolete was called

Hello
I have recently compatible drive my plugin and make me a problem using PDDocSave; get "a not implemented or obsolete function was called.
Test X and XI has the same answer.
Reading Re: Acrobat Reader X and PDDocSave it seems that it is a bug in X, but I would have taken something like this would be fixed by XI.
The code below has save the file where it is, but I'm also calling the function with the PDSaveCopy flag to another location and get the same result.
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pdDoc = AVDocGetPDDoc (avDoc);
ASFile asFile = PDDocGetFile (pdDoc);
ASFileSys asFileSys = ASFileGetFileSys (asFile);
Céline ASPathName = ASFileAcquirePathName (asFile);
PDDocSave (pdDoc, PDSaveFull |) PDSaveLinearized | PDSaveCollectGarbage, celine, asFileSys, NULL, NULL);
I thought that maybe the Save flags may have been the cause, but eliminate one by one had no change.
I do not have the /READER_PLUGIN condition that, if I do I can not compile at all - Re: how to save the active document in my reader plugin?
Thanks for your help. Thought that I ask here before putting in a request for assistance.

I set it with AvDocDoSave and PDDocCopyToFile, both of these work in the drive.

EDIT: I've marked this as the correct answer because it contains what I did to fix my problem, but I want to give credit to lrosenth for putting me on the right track.

Call the javascript function using parameters cause run an immediate dependant
Hello.

I saw a strange behavior, if I try to use javascript parameters in the method af:clientListener property.

Using the syntax
```
 <af:commandButton text="Init" id="cb1"
   partialSubmit="true">
   <af:clientListener method="OnInitControl1" type="click"/>
</af:commandButton>
```
and javascript
```
function OnInitControl1() {
  alert('OnInitControl1 called');
}
```
the method oninitcontrol1 is called first with the click of the button.

But with the syntax
```
<af:commandButton text="Init" id="cb1"
   partialSubmit="true">
   <af:clientListener method="InitCtrl('Control1')" type="click"/>
</af:commandButton>
```
and javascript
```
function InitCtrl(frameName) {
  alert('InitCtrl(' + frameName + ') called');
}
```
the InitCtrl function is called immediately to the loading of the page.

In both cases, the javascript file is inserted into the use of af: document
```
<af:resource type="javascript" source="/ScriptHelper.js"/>
```
Is my "method" of the af property syntax: clientListener the problem?

Paul.
Paul,

I don't know if you can call javascript with parameters in the way that you are currently using. However, have you tried using an af:clientAttribute and enhance the javascript?

Check the operating instructions by Frank on the related topic.

http://www.Oracle.com/technology/products/jdev/tips/fnimphius/passingAdditionalArgumentsToClientListener.html

Arun-

The child functions are undefined on the first image

I'm trying to write a script on the main timeline that looks like this:

// main timeline frame 0
this.stop();
console.log(this.Foo.Bar());

That was a mistake of "Bar is not a function" (he has an undefined).

This is because the this.frame_0 () function has not been performed on the child object (symbol)

// Foo timeline frame 0
this.stop();
this.Bar = function()
{
     return "Hello World";
};

I tried to move the main Timeline frame 1 that works

// main timeline frame 1
this.stop();
console.log(this.Foo.Bar()); // prints "Hello World!"

However, whenever I have a grandchild object, this problem spreads to the top of the timeline

For example, it does not:

// FooBar timeline frame 0, child of Foo
this.stop();
this.Bar = function()
{
     return "Hello World";
};

// Foo timeline frame 0
this.stop();
this.Bar = function()
{
     return "Hello World";
};

// main timeline frame 1
this.stop();
console.log(this.Foo.Bar()); // works
console.log(this.Foo.FooBar.Bar()); // error, Bar() is not a function

But, as expected, it DOES not work

// FooBar timeline frame 0, child of Foo
this.stop();
this.Bar = function()
{
     return "Hello World";
};

// Foo timeline frame 1
this.stop();
this.Bar = function()
{
     return "Hello World";
};

// main timeline frame 2
this.stop();
console.log(this.Foo.Bar()); // works
console.log(this.Foo.FooBar.Bar()); // works

And of course, this does not

// main timeline frame 1
this.stop();
console.log(this.Foo.FooBar.Bar()); // works
console.log(this.Foo.Bar()); // Error, Bar is not a function

My question is: How can I solve the problem of maintaining the ability to call functions, child without suffering creep of the timeline?

I wish all these being on frame_0 so I need either:

a method where I can place the functions directly on the generated classes so that I do not need to wait for the framework functions to call

-> a method to reverse the order of function calls frame_0 of parent from child to child-> parent.

Any help would be greatly appreciated.

I found * a * solution, even if this isn't the best implementation.

The first step to do is on the framework * after * your symbols are placed on the stage (in my case, frame_1), you can do the following:

// FooBar, child of Foo, Frame_0
this.stop();
this.Bar = function()
{
     return "I am FooBar";
}

// Foo, child of main timeline, Frame_0
this.stop();
var $this = this; // for the proper scoping of "this"
this.Bar = function()
{
     return "I am Foo";
}
this.FooBarBar = function()
{
     return $this.FooBar.Bar();
}

// Main timeline, Frame_1
this.stop();
stage.addChild(exportRoot);
stage.update();
console.log(exportRoot.Foo.Bar()); // works
console.log(exportRoot.Foo.FooBar.Bar()); // also works
console.log(exportRoot.Foo.FooBarBar()); // even this works

The only drawback to this is that there are a small * twinkle * because of the Frame_0 has none of my child functions performed and therefore their init States are not defined until Frame_1, but apart from that, it works fine.

How the work of automatic channel selection?

Hi all

I was wondering how the AUTO function works on an Airport Extreme/TimeCapsule channel selector 2.4/5 GHZ? He selects a channel only started upward or is constantly searching for the best channel and according to the needs of switching?

Thank you.

Hi solomani,.

At startup.

Help: call function that calls another function

public var sourceFile:File = File.applicationDirectory.resolvePath ("serverIP.txt");
public var fstream:FileStream = new FileStream();
public var svrAdd:String = ";

private void readText(e:Event):void {}
svrAdd = fstream.readUTFBytes (fstream.bytesAvailable);
FileStream ();
}

public function get vrieniHttpURL (): String
{
{}
fstream.addEventListener (Event.COMPLETE, readText); // I want the readText run before function
fstream.openAsync (sourceFile, FileMode.READ);    / / because I want to get the new value of svrAdd
} while(svrAdd == '')
var v: String = "http://'+ svrAdd +'/ Zion/php /'; "
   return v;
}
PLEASE HELP ME

Hello

First of all, please go through the Flex documentation on what is aynchronous operation is... ? I think that you are not familiar with this concept... Well, let me explain...

public function get vrieniHttpURL (): String

{

{}

fstream.addEventListener (Event.COMPLETE, readText);

fstream.openAsync (sourceFile, FileMode.READ);

delay execution

} while(svrAdd == '')

var v: String = "http://'+ svrAdd +'/ Zion/php /';"

Return to v;

}

In the function as you posted the closure is not necessary it will loop continuously and defenitely will enter an infinite loop because svrAdd remains empty string("") how long loop you... it is because fstream.openAsync (sourceFile, FileMode.READ); is that an asynchronous operation means that the function redaText is executed only when the text file is read completely until the application does not wait for the service to call at the place he will perform the following lines of code in the function vrieniHttpURL i.e;

var v: String = "http://'+ svrAdd +'/ Zion/php /';"

Return to v;

lines executed and your return value will be "http://Zion/php /" instead of http://votre_domaine/Zion/php /.

Use the code to get the solution below:

Import mx.core.Application;

public var sourceFile:File = File.applicationDirectory.resolvePath ("serverIP.txt");
public var fstream:FileStream = new FileStream();
public var svrAdd:String = ";

private void readText(e:Event):void {}
svrAdd = fstream.readUTFBytes (fstream.bytesAvailable);
FileStream ();
svrAdd = 'http://'+ svrAdd +'/ Zion/php /';
}
public function vrieniHttpURL (): void
{
fstream.addEventListener (Event.COMPLETE, readText); I want the readText function to run before
fstream.openAsync (sourceFile, FileMode.READ);    because I want to get the new value of the svrAdd
}

So whats that the above code is once when the 'vrieniHttpURL' function is called you open the file in read mode, and you cannot get the value of the svrAdd within this service because the contents of the file have not yet read... the content in the file is read-only once the readText function is executed... so once your readText function performed you will have your svrAdd filled with the correct value... That is to say; It contains your exact address. If after this you can use the value of svrAdd... you can not return the value of svrAdd with in the function 'vrieniHttpURL' as you did in your code.

Give it a try...

In fact I am unable to understand why you are so much unnecessary things... you can simply save your domain address in a variable and access in your application as below.

public var svrAdd:String = http://yourdomainname.com/;

If your domain name will change dynamically...?

Please mark as answer if it helped you...

Thank you

Jean Claude Chari.S

Determine how the CFC function was called?

Similar Questions

Maybe you are looking for